6) (stpsiswayam gov detaleNPTEL)
it | (https://swayam.gov.in)
[email protected]
NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL) » Pavement Materials (Under Pavement
Engineering) (course)
Week 7 Assignment 7
Course
outline The due date for submitting this assignment has passed.
Due on 2022-09-14, 23:59 IST.
How does an As per our records you have not submitted this assignment.
NPTEL
online 1) Which of the following can act as a crosslinking agent in polymer 1 point
ooce modified bitumen?
work? () Crumb Rubber
wookoo Sllica
Sulphur
Week 1) ses
No, the answer is incorect.
Week 2 () Score: 0
Accepted Answers
Week 3() Sulphur
Week 4) 2) The maximum phase angle permissible for polymer modified 4 point
bitumen as per IS 15462-2019 is equal to
Week
jock 50) 20°
Weeks () 7°
86
Week 7 () 50
No, the answer is incorect
Lecture 31 ,
Modified Score: 0
Modified Accepted Answers
(unit? 75
unit=798lesso
n=80) 3) The tail of an emulsifier consist of 1 pointLecture 32:
Bitumen
Emulsion,
(unite
unit=798lesso
81)
Lecture 33:
Production of
Bituminous
Mixtures.
(unit2
unit=798lesso
1°82)
Lecture 34:
Role and
Desirable
Properties:
Mix Design.
(unit?
unit=798lesso
83)
Lecture 35:
Volumetries in
Mix Design
(Part 1) (unit?
unit=798lesso
n=84)
Quiz: Week7
Assignment 7
(assessment?
name=85)
Week 8 ()
Week 9 ()
Week 10 ()
Week 11 ()
DOWNLOAD
VIDEOS ()
WEEKLY
FEEDBACK
0
Week 12 ()
Polar group
Molecules containing oxygen
Amine group
Long chain hydrocarbon
No, the answer is incorrect.
Score: 0
Accepted Answers:
Long chain hydrocarbon
4) During the manufacturing process of emulsion the viscosity of 1 point
asphalt binder should be
Lower than 0.2 Pa.s
Greater than 0.3 Pa.s
Lower than 0.3 Pa.s
Lower than 0.4 Pa.s
No, the answer is incorrect.
‘Score: 0
Accepted Answers:
Lower than 0.2 Pa.s
5) Which type of emulsion is recommended for tack coat application? 1 point
RS-2
RS-1
Ms
ss
No, the answer is incorrect.
Score: 0
Accepted Answers:
RS-1
6) Which of the following solvent can be used to prepare rapid curing 1 point
cutback?
Kerosene
Diese!
Gas Oi
Naptha
No, the answer is incorrect,
Score: 0
Accepted Answers:
Naptha
7) The durability of the bituminous mixture can be increased by 1 point
Reducing the bitumen content
Increasing the volume of aggregates
Increasing the bitumen film thickness
Lowering in-place compactionNo, the answer is incorrect.
Score: 0
Accepted Answers:
Increasing the bitumen film thickness
8) Fatigue susceptibility of bituminous mixture can be reduced by
Reducing the air-void in the mix
Increasing the air-void in the mix
Using siliceous aggregates
Using high filler content
No, the answer is incorrect
Score: 0
Accepted Answers:
Reducing the air-void in the mix
1 point
9) In the batch mix plant, mixing of bitumen and aggregates is done 1 point
in
Near the exit of drying drum
Pug miill
Near cold-feeder bins
Storage silo
No, the answer is incorrect
Score: 0
Accepted Answers:
Pug mill
10) Aggregates from cold feeder bins are transferred to drying drum
using
Conveyer belt
Hot elevators
Trucks
None of the above
No, the answer is incorrect.
Score: 0
Accepted Answers:
Conveyer belt
11) Effective specific gravity of aggregates cannot be measured
because
Water absorption cannot me measured
Itis difficult to saturate surface dry the aggregates
Bitumen absorption of aggregates cannot be measured
Effective specific gravity is a function of binder content
No, the answer is incorrect
Score: 0
Accepted Answers
Bitumen absorption of aggregates cannot be measured
1 point
1 point12)Conditioning of loose mixture at the compaction temperature 1 point
before compaction is important
To produce mixture with uniform properties
For uniform temperature conditioning
To allow for bitumen absorption
To remove moisture from the mixture
No, the answer is incorrect.
Score: 0
Accepted Answers:
To allow for bitumen absorption