Scribd Logo
Upload

Welcome to Scribd!

  • Klübersynth UH1 64-62 EN en

    Uploaded by

    Kamila Arias
    29 views2 pages

    Original Title

    Klübersynth_UH1_64-62_EN_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    29 views2 pages

    Klübersynth UH1 64-62 EN en

    Uploaded by

    Kamila Arias

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    Product information

    Klübersynth UH1 64-62


    Synthetic lubricating grease suitable for use in the food-processing and
    pharmaceutical industries

    Benefits for your application


    – Less maintenance due to good resistance to low and high temperatures, synthetic base oil for extended relubrication
    intervals and good resistance to water
    – ISO 21469 certified - supports the compliance with the hygienic requirements in your production. You will find further
    information about ISO Standard 21469 on our website www.klueber.com.

    Description excluded. We recommend lubricating all friction points with


    Klübersynth UH1 64-62 in order to avoid negative effects
    Klübersynth UH1 64-62 shows a good low- and high- caused by lubricant spreading.
    temperature behaviour, and good resistance to water,
    corrosion, ageing and oxidation.
    Klübersynth UH1 64-62 is NSF H1 registered and therefore Application notes
    complies with FDA 21 CFR § 178.3570. The lubricant was Klübersynth UH1 64-62 is applied by brush, spatula, grease
    developed for incidental contact with products and packaging gun or grease cartridge. Before using Klübersynth UH1 64-62 to
    materials in the food-processing, cosmetics, pharmaceutical or replace other greases, the bearings should be cleaned
    animal feed industries. The use of Klübersynth UH1 64-62 can thoroughly. Grease exchange by relubrication is sufficient if the
    contribute to increase reliability of your production processes. greases are miscible.
    We nevertheless recommend conducting an additional risk
    analysis, e.g. HACCP.
    Material safety data sheets
    Application Material safety data sheets can be requested via our website
    www.klueber.com. You may also obtain them through your
    Klübersynth UH1 64-62 is suitable for lubrication points in contact person at Klüber Lubrication.
    machines and installations used in the food-processing and
    pharmaceutical industries, particularly for all points where
    contact between the lubricant and the food product cannot be

    Pack sizes Klübersynth UH1 64-62


    Cartridge 400 g +
    Can 1 kg +
    Bucket 25 kg +

    Product data Klübersynth UH1 64-62


    Article number 096046
    NSF-H1 registration 136 871
    Chemical composition, type of oil ester oil
    Chemical composition, type of oil synthetic hydrocarbon oil
    Chemical composition, thickener silicate
    Lower service temperature -40 °C / -40 °F
    Upper service temperature 140 °C / 284 °F
    Colour space beige
    Texture homogeneous
    Density at 20 °C approx. 0.92 g/cm³

    Klübersynth UH1 64-62,Prod. 096046,en


    Edition 22.01.2018 [replaces edition 30.12.2016]
    Product information

    Klübersynth UH1 64-62


    Synthetic lubricating grease suitable for use in the food-processing and
    pharmaceutical industries

    Product data Klübersynth UH1 64-62


    Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm
    Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm
    Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 65 mm²/s
    Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 10 mm²/s
    Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 3 000 mPas
    Drop point, DIN ISO 2176, IP 396 >= 250 °C
    Speed factor (n x dm) approx. 500 000 mm/min
    Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C <= 1 400 mbar
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened 24 months
    original container, approx.

    Klüber Lubrication München SE & Co. KG /


    Geisenhausenerstraße 7 / 81379 München / Germany /
    Klüber Lubrication – your global specialist phone +49 89 7876-0 / fax +49 89 7876-333.

    Innovative tribological solutions are our passion. Through The data in this document is based on our general experience and knowledge at
    the time of publication and is intended to give information of possible applications
    personal contact and consultation, we help our customers to be to a reader with technical experience. It constitutes neither an assurance of
    successful worldwide, in all industries and markets. With our product properties nor does it release the user from the obligation of performing
    ambitious technical concepts and experienced, competent staff preliminary field tests with the product selected for a specific application. All data
    are guide values which depend on the lubricant's composition, the intended use
    we have been fulfilling increasingly demanding requirements by and the application method. The technical values of lubricants change depending
    manufacturing efficient high-performance lubricants for more on the mechanical, dynamical, chemical and thermal loads, time and pressure.
    than 80 years. These changes may affect the function of a component. We recommend
    contacting us to discuss your specific application. If possible we will be pleased to
    provide a sample for testing on request. Klüber products are continually improved.
    Therefore, Klüber Lubrication reserves the right to change all the technical data in
    this document at any time without notice.
    Publisher and Copyright: Klüber Lubrication München SE & Co. KG. Reprints,
    total or in part, are permitted only prior consultation with Klüber Lubrication
    München SE & Co. KG and if source is indicated and voucher copy is forwarded.

    You might also like