Galley Cooking Plate Futura - rp4

RANGE
FUTURA RP4, RP6
Accessories
CHEF 200
CHEF 220
CHEF 240
Installation and Operation Manual
S/N: 095523/03 Rev.: 4.0
Downloaded from www.Manualslib.com manuals search engine

7.5.2009 Rev. 4.0
Dear Customer,
Congratulations on deciding to choose our appliance for your kitchen activities. You
made an excellent choice. We will do our best to make you a satisfied customer like thou-
sands of customers we have around the world.
Please read this manual carefully. You will learn correct, safe and efficient working meth-
ods in order to get the best possible benefit from the appliance. The instructions and hints
in this manual will give you a quick and easy start, and you will soon note how nice it is
to use this equipment.
All rights are reserved for technical changes.
You will find the main technical data on the rating plate fixed to the appliance. When you
need service or technical help, please let us know the serial number shown on the rating
plate. This will make it easier to provide you with correct service.
For your convenience, space is provided below for you to record your local service con-
tact information.
Service phone number:...............................................................................................
Contact person:....................................................................................................................

7.5.2009 Rev. 4.0

7.5.2009 Rev.
1. General .......................................................................................................... 1
1.1 Symbols used in the manual .......................................................................................... 1
1.2 Symbols used on the appliance ...................................................................................... 1
1.3 Checking the relationship of the appliance and the manual .......................................... 1
2. Safety .............................................................................................................. 2
2.1 Safe use of the appliance ............................................................................................... 2
2.2 Disposal of the appliance ............................................................................................... 2
3. Functional description .................................................................................. 3

3.1 Intended use of the appliance ........................................................................................ 3
3.1.1 Prohibited use ........................................................................................................ 3
3.2 Operating principle and construction ........................................................................... 3
4. Operation instructions ................................................................................. 4

4.1 Before use ...................................................................................................................... 4
4.1.1 Selecting cookware ................................................................................................ 4
4.2 Operation procedures ..................................................................................................... 4
4.2.1 Using the range ...................................................................................................... 4
4.3 After use ........................................................................................................................ 5
4.3.1 Cleaning ................................................................................................................. 5
4.3.2 Other service measures .......................................................................................... 6
5. Installation ..................................................................................................... 7
5.1 General .......................................................................................................................... 7
5.2 Transporting and unpacking the range .......................................................................... 7
5.3 Positioning the range ..................................................................................................... 7
5.4 Electrical connections .................................................................................................... 7
5.5 Test-run .......................................................................................................................... 8
6. Troubleshooting ............................................................................................ 9
7. Spare parts .................................................................................................. 11

7.1 Voltage codes .............................................................................................................. 13
7.2 Product codes ............................................................................................................... 13
8. Technical specifications .............................................................................. 19

7.5.2009 Rev.

7.5.2009 Rev. 4.0
General
1. General
Carefully read the instructions in this manual as they contain important information re-
garding proper, efficient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufactur-
er’s instructions and following local regulations. The connection of the appliance to the
electric and water supply must be carried out by qualified persons only.
Persons using this appliance should be specifically trained in its operation.
Switch off the appliance in case of failure or malfunction. The periodical function checks
requested in the manual must be carried out according to the instructions. Have the appli-
ance serviced by a technically qualified person authorized by the manufacturer and using
original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1.1 Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand. Given instruc-
tions are mandatory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad results, appli-
ance damage or hazardous situations.
This symbol informs about recommendations and hints that help to get the best perform-
ance out of the appliance.
1.2 Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of
the part must be carried out by qualified persons only.
1.3 Checking the relationship of the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the man-
uals are missing, it is possible to order new ones from the manufacturer or the local rep-
resentative. When ordering new manuals it is essential to quote the serial number shown
on the rating plate.

7.5.2009 Rev. 4.0
Safety
2. Safety
2.1 Safe use of the appliance
Because the range is a heated appliance that has hot surfaces during normal use, the fol-
lowing warnings and instructions must be followed in order to avoid burns.
During long-time operation even the frame surrounding the cooking plates gets hot.
The capability of the cooking plates to store and even out the heat also keeps them hot for
a long time after switching them off.
For safe handling of cookware on the cooking top, always use heat protective gloves.
Do not leave the range on for long periods totally without supervision.
2.2 Disposal of the appliance
The destroying of the appliance when its economical lifetime has been reached may be
harmful to the environment if not properly handled. Utilization of materials that are reus-
able is best done by professional personnel specialized in recycling.

7.5.2009 Rev. 4.0
Functional description
3. Functional description
3.1 Intended use of the appliance
The Futura range is intended for preparing different kinds of foodstuffs using cookware.
3.1.1 Prohibited use
Use of the appliance for other purposes than stated above is prohibited.
Covering the gaps between the range cooking plates and the upper frame with folio is pro-
hibited.
Preparing food directly on the cooking plate without cookware is prohibited.
The manufacturer of the appliance takes no responsibility for situations that might occur
if the warnings and instructions in this manual are neglected.
3.2 Operating principle and construction
Depending on the model, the range is equipped with four or six cooking plates.
Each cooking plate is equipped with a 7-position power regulator which allows power
regulation in several steps. A green pilot light for every cooking plate indicates that the
plate is on.
In order to ease daily cleaning the cooking plates are hinged and can be swinged up in an
upright position. In addition, the range is equipped with a removable spillage tray.

7.5.2009 Rev. 4.0
Operation instructions
4. Operation instructions
4.1 Before use
The cooking plates of the range are protected with a thin layer of oil for the duration of
storage and transportation. When heating up the range for the first time the oil may create
some smoke and unpleasant smell. This is quite normal and disappears quickly when us-
ing the range.
4.1.1 Selecting cookware
Always use flat-based cookware in order to achieve good heat transfer and to increase the
service life of the cooking plate. Placing a cold and wet pan on a red-hot cooking plate
should be avoided as the thermal tensions created considerably decrease the service life
of the plate.
You get the best benefit from the range as well as from the cookware by observing the
following:
• Use good quality flat-based cookware.

• Wait for pans to cool before putting them in cold water.
• Always ensure pans have clean, dry bases before use.
• Ensure pan handles are positioned safely and away from heat sources.
• Always use pan lids except when frying.
• Remember good quality pans retain heat well, so generally only low or medium
heat is necessary.
4.2 Operation procedures
4.2.1 Using the range
Switch the appliance off if it is damaged or is malfunctioning. Contact authorised service

personnel using original spare parts for service of the appliance.
Ranges intended for use aboard ships are equipped with a potrack. Using a range aboard
a ship without the potrack is prohibited.
During the installation, a mains switch may have been fitted near the range, often on a wall
nearby. Check that the mains switch is in the ON position.
The range is controlled with power regulators and pilot lights.

7.5.2009 Rev. 4.0
2
3
4
Operating panel
1. Spillage tray
2. Pilot light, cooking plate on
3. Power regulator, front plate
4. Power regulator, rear plate
Each cooking plate is equipped with a 7-position power regulator which allows power
regulation in several steps. A green pilot light for every cooking plate indicates that the
plate is on.
Cooking is started by turning the power regulator to position 6. When boiling starts, the
power is decreased as needed. Usually it is possible to use a small or medium power set-
ting.
Do not leave the cooking plate on without any load, because it then overheats, which con-
siderably decreases the service life of the plate. By turning the cooking plate off when not
needed, energy is saved and a cooler working environment is achieved.
If there are longer interruptions in the electricity distribution, all power regulators of the
range should be set to the 0 position. This should be done in order to prevent unexpected
start-up of the range when the electricity distribution is restored.
4.3 After use
4.3.1 Cleaning
Use of a water hose or pressure cleaning jet is strictly forbidden.
It is not allowed to wipe the undersides of cooking plates swung up to a cleaning position
with a wet sponge, cloth etc., because water flowing down the plate is absorbed into the
insulating material thus causing earth leakage.

7.5.2009 Rev. 4.0
When cleaning the cooking plates, observe that they are hot a long time after they have
been switched off. When the cooking plates are swinged up for cleaning, it is advisable to
support the plate in the upper position with one hand thus preventing the possibility that
they unexpectedly return to their working position.
Be careful when removing the spillage tray, as it may contain spillages that are still hot.
Cleaning is very easy, if possible spillovers are removed immediately with a damp cloth.
Sugar and mixes containing much sugar must be removed immediately, because later re-
moving is laborious.
In all cleaning, prefer chemical cleaning methods rather than mechanical rubbing. Use a
slightly alkaline detergent (pH 8-10) diluted in water according to instructions when
cleaning the surfaces of the range.
Always dry the cooking plates after cleaning by heating them up.
Clean cooking plates give an efficient heat transfer to the cookware. Cooking is then fast
and the service life of the cooking plates is extended.
The spillage tray is pulled out and cleaned. Outer surfaces are wiped off with a damp cloth
and then wiped dry.
4.3.2 Other service measures
The appliance does not include any user serviceable parts inside. Service must be left to
authorised service personnel.

7.5.2009 Rev. 4.0
Installation
5. Installation
5.1 General
The installation of this appliance must be carried out in accordance with the manufactur-
er’s instructions and following local regulations. This installation manual must be used
together with the installation drawing of the appliance.
The connection of the appliance to the electrical and water supply must be carried out by
qualified persons only.
5.2 Transporting and unpacking the range
The best way to move the range is to keep it in its package as long as possible while it also
protects the range from outer damage. If it is necessary to unpack the range, possible lift-
ing must be done from the bottom frame using suitable spacers of wood. In order to avoid
damages it is not allowed to use the cooking top as a workbench during installation.
5.3 Positioning the range
Because the temperature of a cooking plate accidentally forgotten on without a pan may
reach even 550°C, it is mandatory to follow local fire safety regulations when installing
the range.
The range is positioned in the installation place and adjusted in a horizontal position from
the adjustable legs.
On ranges fitted with a convection oven the horizontal position should be checked from
the runners of the oven in order to achieve good browning results.
When the range is on the correct location and in a horizontal position, it must be bolted to
the floor, the land models by the flanges in the rear adjusting legs and the marine models
from all four leg flanges.
5.4 Electrical connections
Besides the live electrical parts, also look out for possible moving mechanisms inside the
appliance, if there is a need for testing during installation and the guards or cover plates
are detached.

7.5.2009 Rev. 4.0
Installation
In order to make eventual future service easier and increase safety, a mains switch must
be installed near the appliance. This switch must disconnect the appliance completely
from the electrical supply network.
The cable gland for the supply cable is located on the rear wall of the oven (right lower
corner). In order to make the connection, the right side panel must be removed.
5.5 Test-run
Acquaint yourself with the user manual of this appliance before testing it. The appliances
under the cooking top are provided with their own manuals.
After connecting the cable check the function of the range.
Check that
• every cooking plate heats up and the corresponding pilot light turns on when the
plate is switched on with the power regulator
• no wires inside the appliance get jammed before refitting the outer panels.
Refit the outer panels.

7.5.2009 Rev. 4.0
Troubleshooting
6. Troubleshooting
If the appliance does not function, check the following:
• Has the appliance been used according to the instructions?

• Are all possibly removable parts refitted?
• Is the mains switch on the appliance or nearby - often on the wall - in the ON po-
sition?
• Are the circuit breakers (fuses) of the appliance in the electricity distribution board
in working order? Ask an authorised person to check the circuit breakers.
If even this does not help, figure out in advance how to briefly describe the breakdown
and contact an authorised service person.

7.5.2009 Rev. 4.0
Troubleshooting
10

7.5.2009 Rev. 4.0
Spare parts
7. Spare parts
11

7.5.2009 Rev. 4.0
Spare parts
12

7.5.2009 Rev. 4.0
Spare parts
7.1 Voltage codes
Voltage Voltage code

A 3/N/PE∼400/230V 50Hz
B ∼250V 16A 50Hz
C 3/N/PE∼380/220V 50Hz
D 3/PE∼200V 50-60Hz
F 2/PE 220−240V 50Hz
G 3/N/PE∼415/240V 50Hz
H 3/PE∼230V 50Hz
I 3/PE∼220V 60Hz
J 3/PE∼380 50Hz
K 3/PE∼400V 50Hz
L 3/PE∼415V 50Hz
M 3/PE∼440V 60Hz
N 3/PE∼460V 60Hz
O 3/PE∼480V 60Hz
P 1/N/PE~220-240V 50Hz
R 2/PE~220-230V 60Hz
S 3/N/PE∼400/230V 50Hz
T 3/PE∼230V 60Hz
U 1/N/PE~100V 50-60Hz
7.2 Product codes
Product code Full name

Model codes
RP FUTURA RP
Type codes
4 4
6 6
Accessory codes
200 CHEF 200
220 CHEF 220
240 CHEF 240
13

7.5.2009 Rev. 4.0
Spare parts
14

7.5.2009 Rev. 4.0
Spare parts
ID Code Model Type Voltage Description

Module:
10 3752924 RP 4,6 A,H,I Cooking plate
20 3752971 RP 4,6 A,H,I Cable conduit
30 3752940 RP 4,6 A,H,I Eyebolt M12x90
40 3752937 RP 4 A,H,I Rear panel
50 3753140 RP 6 A,H,I Rear panel
80 3752933 RP 4,6 A,H,I Side panel
90 3493234 RP 4,6 A,H,I Knob, black
100 3442159 RP 4,6 A,H,I Pilot light, green
110 3753180 RP 4,6 A,H,I Set of wires
120 3288997 RP 4,6 A,H,I Switch
130 3752935 RP 4 A,H,I Front panel
140 3753139 RP 6 A,H,I Front panel
150 3752936 RP 4 A,H,I Spillage tray
160 3753157 RP 6 A,H,I Spillage tray
RP=FUTURA RP
200=CHEF 200, 220=CHEF 220, 240=CHEF 240
A=3/N/PE∼400/230V 50Hz, H=3/PE∼230V 50Hz, I=3/PE∼220V 60Hz, J=3/PE∼380 50Hz, L=3/PE∼415V 50Hz, M=3/
PE∼440V 60Hz
15

7.5.2009 Rev. 4.0
Spare parts
16

7.5.2009 Rev. 4.0
Spare parts
ID Code Model Type Voltage Description

Module:
10 3753052 RP 4,6 J,L,M Cooking plate
20 3752971 RP 4,6 J,L,M Cable conduit
30 3752940 RP 4,6 J,L,M Eyebolt M12x90
40 3752937 RP 4 J,L,M Rear panel
50 3753140 RP 6 J,L,M Rear panel
80 3752933 RP 4,6 J,L,M Side panel
90 3493234 RP 4,6 J,L,M Knob, black
100 3442159 RP 4,6 J,L,M Pilot light, green
110 3753180 RP 4,6 J,L,M Set of wires
120 3288997 RP 4,6 J,L,M Switch
130 3752935 RP 4 J,L,M Front panel
140 3753139 RP 6 J,L,M Front panel
150 3752936 RP 4 J,L,M Spillage tray
160 3753157 RP 6 J,L,M Spillage tray
170 3512984 RP 4,6 J,L,M Transformer
180 3521812 RP 4 J,L,M Storm rail RP4 Marine
190 3521837 RP 6 J,L,M Storm rail RP6 Marine
200 3753155 RP 4 J,L,M Kettle support RP4 Marine
210 3753167 RP 6 J,L,M Kettle support RP6 Marine
RP=FUTURA RP
200=CHEF 200, 220=CHEF 220, 240=CHEF 240
PE∼440V 60Hz
17

7.5.2009 Rev. 4.0
Spare parts
18

7.5.2009 Rev. 4.0
Technical specifications
8. Technical specifications
Main and control circuit T02119 B3
Main and control circuit T02146 A3
Installation drawing T02194 B3
19










Main and control circuit T02146 A3







7.5.2009 Rev. 4.0
Technical specifications
Item Model Type Accessory Specification

Outer dimensions WxDxH RP 4 800 x 800 x 900 mm
Outer dimensions WxDxH RP 6 1200 x 800 x 900 mm
Cooking plates RP 4 4
Cooking plates RP 6 6
Power regulation RP 7-position power regulator, a pilot light for each
plate.
Material RP Cooking plates of cast iron. All outer surfaces of
stainless steel
Weight with package RP 4 200 appr. 160 kg
Weight without package RP 4 200 appr. 125 kg
Package dimensions WxDxH 4 860 x 920 x 1050 mm
Package dimensions WxDxH 6 1260 x 920 x 1050 mm
Electrical connection See installation drawing.
Operating conditions Normal commercial kitchen conditions, tempera-
ture over 0°C.
RP=FUTURA RP
200=CHEF 200, 220=CHEF 220, 240=CHEF 240
PE∼440V 60Hz
36


Galley Cooking Plate Futura - rp4

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Galley Cooking Plate Futura - rp4

Uploaded by

Copyright:

Available Formats

RANGE

FUTURA RP4, RP6

Installation and Operation Manual

S/N: 095523/03 Rev.: 4.0

Downloaded from www.Manualslib.com manuals search engine

All rights are reserved for technical changes.

Service phone number:...............................................................................................

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

3. Functional description .................................................................................. 3

4. Operation instructions ................................................................................. 4

7. Spare parts .................................................................................................. 11

8. Technical specifications .............................................................................. 19

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Persons using this appliance should be specifically trained in its operation.

1.1 Symbols used in the manual

1.2 Symbols used on the appliance

1.3 Checking the relationship of the appliance and the manual

Downloaded from www.Manualslib.com manuals search engine

2.1 Safe use of the appliance

2.2 Disposal of the appliance

Downloaded from www.Manualslib.com manuals search engine

3.1 Intended use of the appliance

3.1.1 Prohibited use

Preparing food directly on the cooking plate without cookware is prohibited.

3.2 Operating principle and construction

Downloaded from www.Manualslib.com manuals search engine

4.1 Before use

4.1.1 Selecting cookware

• Use good quality flat-based cookware.

4.2 Operation procedures

4.2.1 Using the range

Switch the appliance off if it is damaged or is malfunctioning. Contact authorised service

The range is controlled with power regulators and pilot lights.

Downloaded from www.Manualslib.com manuals search engine

4.3 After use

Use of a water hose or pressure cleaning jet is strictly forbidden.

Downloaded from www.Manualslib.com manuals search engine

4.3.2 Other service measures

Downloaded from www.Manualslib.com manuals search engine

5.2 Transporting and unpacking the range

5.3 Positioning the range

5.4 Electrical connections

Downloaded from www.Manualslib.com manuals search engine

After connecting the cable check the function of the range.

Refit the outer panels.

Downloaded from www.Manualslib.com manuals search engine

If the appliance does not function, check the following:

• Has the appliance been used according to the instructions?

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

7.1 Voltage codes

Voltage Voltage code

7.2 Product codes

Product code Full name

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

ID Code Model Type Voltage Description

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine