Powerflex 755Tm Ip00 Open Type Kits: Technical Data
Powerflex 755Tm Ip00 Open Type Kits: Technical Data
Introduction
PowerFlex 750-Series products with TotalFORCE® technology offer precise motor control along with solutions for harmonic mitigation,
regeneration, and common-bus system configurations. The PowerFlex 755T products use TotalFORCE technology, our patented field-oriented
control for accurate torque control. With TotalFORCE, the PowerFlex 755T products deliver fast, precise, responsive control of position, velocity,
and torque.
Designed and built using a modular approach, the PowerFlex 755T products offer a full range of ratings and capabilities that are suited to your
application needs. The modular construction also offers the added advantage of fast and easy parts replacement and simplified management of a
common set of spares.
• PowerFlex 755TL Drive – Provides harmonic mitigation and power factor correction by using active front-end technology.
• PowerFlex 755TR Drive – Features built-in regeneration capability that helps reduce energy consumption by delivering regenerative energy
from motors back to the incoming supply. Line regeneration can reduce the need for braking resistors and associated cooling equipment and
helps avoid wasteful dissipation of energy. The drive also offers harmonic mitigation.
• PowerFlex 755TM Drive System – Select from a series of predesigned configurations for regenerative bus supplies and common bus
inverters to optimize your system design and power consumption. Gain energy efficiency with motors that share energy between
regenerating and motoring loads. A common bus drive system offers advantages such as design flexibility, energy optimization, and reduced
installation costs. Systems provide harmonic mitigation and built-in regeneration capability.
This manual provides technical specifications, ratings, and selection information for the PowerFlex® 755TM IP00 / Open Type kits. All kits that are
listed in this publication must be installed in a user-supplied, appropriately rated enclosure. Installation guidelines and procedures for IP00 / Open
Type kits are in the PowerFlex 755TM IP00 Open Type Kits Installation Instructions, publication 750-IN101.
Summary of Changes
This publication contains new and updated information as indicated in the following table.
Topic Page
Added a product introduction. 2
Added certification information for seismic-qualified installations to the table in the 4
Certifications and Environmental Specifications section.
Added the following kits to the Component Certifications table: 4
• DC bus conditioner (marine)
• EMC C2 filter and bus bars
• Enclosure kits for seismic-qualified installations
Added the IP00 kits for right-to-left configuration to the Frame 8 PowerFlex 755TL or 8 and 11, respectively
PowerFlex 755TR Drive Options and Frame 8 PowerFlex 755TM Bus Supply Options tables.
Added the EMC C2 filter option kits to the following product tables: 9
• Frame 8 PowerFlex 755TL or PowerFlex 755TR Drive Options 11
• Frame 8 PowerFlex 755TM Bus Supply Options 15
• Frame 9 PowerFlex 755TL or PowerFlex 755TR Drive Options 17
• Frame 9 PowerFlex 755TM Bus Supply Options 22
• Frame 10 PowerFlex 755TL or PowerFlex 755TR Drive Options 24
• Frame 10 PowerFlex 755TM Bus Supply Options
Added the optional enclosure kits for seismic qualified installations to the following tables:
• Frame 8 PowerFlex 755TL or PowerFlex 755TR Drive Options 9
• Frame 8 PowerFlex 755TM Bus Supply Options 11
• Frame 8 PowerFlex 755TM Common Bus Inverter Options 13
• Frame 9 PowerFlex 755TL or PowerFlex 755TR Drive Options 15
• Frame 9 PowerFlex 755TM Bus Supply Options 17
• Frame 9 PowerFlex 755TM Common Bus Inverter Options 19
• Frame 10 PowerFlex 755TL or PowerFlex 755TR Drive Options 22
• Frame 10 PowerFlex 755TM Bus Supply Options 24
• Frame 10 PowerFlex 755TM Common Bus Inverter Options 26
• Frame 11 PowerFlex 755TR Drive Options 28
• Frame 11 PowerFlex 755TM Bus Supply Options 30
• Frame 11 PowerFlex 755TM Common Bus Inverter Options 32
• Frame 12 PowerFlex 755TR Drive Options 34
• Frame 12 PowerFlex 755TM Bus Supply Options 36
• Frame 12 PowerFlex 755TM Common Bus Inverter Options 38
Updated the circuit breaker information for cat. no. 20-750-MACPPCCB1-CD-4K0 and 20-750- 45
MACPPCCB1-CD-5K0.
Added the DC link/fuse assembly kits for right-to-left configuration to the DC Link/Fuse 52
Assemblies table.
Added the new DC bus conditioner (marine) kit to the DC Bus Conditioner table. 52
Added the EMC C2 Filter Kits table. 53
Added the frame 8 and 9 drive and bus supply AC bus bar splice kits and frame 8 exit wire bay 54
splice kit for right-to-left configuration to the AC Bus Bar Splices table.
Added the new frame 8 back panel with stab receptacles kits for right-to-left configuration to 55
the Stab Receptacles table.
Add the PowerFlex 750TM EMC C2 Filter Wire Bay and Required Accessories table. 58
Add the Kits for Seismic-qualified Installations table. 58
Added the EMC C2 Filter Kits table. 62
Added maximum amp rating and derating information for extruded DC bus bar assemblies. 71
Component Certifications
Certification is indicated with this ‘•’ mark.
Environmental Specifications
Category Specification
Environmental compliance Rockwell Automation maintains current product environmental information on its website at:
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page
Altitude
Based on load See Derating Guidelines on pages 70…89.
Based on voltage Based on EN61800-5-1 (Electro-thermal Safety Standard for drives)
Atmospheric protection
IEC Conformity with IEC 60721-3-3, 3C2 and 3S2, for components manufactured by Rockwell Automation.
A suitable IP54, UL Type 12 Cabinet is required to meet the 3S2 requirement.
ISA International Society for Automation Conformity Standard 71.04, for components manufactured by Rockwell Automation.
Severity level G3 (Harsh, chemically active gases) at less than or equal to 50% relative humidity.
Class SA, SB, and SC, Severity X environmental concentrations (airborne particulates).
A suitable IP54, UL Type 12 Cabinet is required to meet the G3 requirement.
Important: PowerFlex 755T products must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas,
vapors, or dust. If the product is to be stored, it must be stored in an area where it is not exposed to a corrosive atmosphere.
Important: PowerFlex 755T products must not be stored or installed in an environment that contains conductive pollutants.
Environmental impact EU Environmental Directive:
Restriction of Hazardous Substances (RoHS) Directive (2011/65/EU) - CE marking is required for the EU
Registration, Evaluation and Authorization of Chemicals (REACH) Regulation (1907/2006)
Packaging Directive (94/62/EC as amended by 2004/12/EC and 2005/20/EC)
China Restriction of Hazardous Substance (RoHS) Directive
Surrounding air temperature
Maximum Surrounding
Module Inlet Temperature(1) Temperature
Control pods -20…+60 °C (-4…+140 °F) 65 °C (149 °F)
Power modules -20…+40 °C (-4…+104 °F) 50 °C (122 °F)
41…55 °C (106…131 °F) 65 °C (149 °F)(2)
LCL filter modules -20…+40 °C (-4…+104 °F) 50 °C (122 °F)
41…55 °C (106…131 °F) 65 °C (149 °F)(2)
DC precharge modules -20…+55 °C (-4…+131 °F) 65 °C (149 °F)
55…60 °C (131…140 °F) 65 °C (149 °F)(2)
AC precharge modules -20…+40 °C (-4…+104 °F) 50 °C (122 °F)
41…55 °C (106…131 °F) 65 °C (149 °F)(2)
(1) Inlet temperature represents the air immediately entering the IP00 open type module.
(2) Elevated temperature values are based on appropriate derating.See the Ambient Temperature/Load Derating Guidelines starting on page 70.
Ambient air temperature(1) IP21, UL Type 1: -20…+40 °C (-4…+104 °F) Frames 8…12, all ratings
IP54, UL Type 12: -20…+40 °C (-4…+104 °F) Frames 8…12, all ratings
Ambient temperature of 50 °C (122 °F) or 55 °C (134 °F) with derating. See Derating Guidelines on page 70.
(1)
Storage temperature -40…+70 °C (-40…+158 °F)
400 800
(15.7) (31.5)
6 7
Enclosures that are shown are 600 mm (23.6 in) deep.
Frame 8 PowerFlex 755TL or PowerFlex 755TR Drive IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
DC common mode cores 20-750-MDCCM1-F8M 1 For selection information, see DC Common Mode Core on page 53.
DC common mode core assembled on the DC link/fuse assembly if EMC filtering is required.
AC input bus bars and fuses 20-750-MACLn-F8M 1 For voltage rating, see AC Input Link Bus Bar and Fuse Assemblies on page 55.
(2)
AC input bus bars splice 20-750-MACSPL2-F8M 1 For voltage rating, see AC Bus Bar Splices on page 54.
AC common mode cores 20-750-MACCM1-F8M 1 For selection information, see AC Common Mode Core on page 55.
AC common mode core assembled on the LCL filter module if EMC filtering is required.
AC input bus bar/insulator/bracket 20-750-MCNCTAC-F8 1 See AC Input Bus Bars on page 54.
Control bus assembly, input bay 20-750-MCBUS1-IB-F8M 1 See Control Bus Assemblies on page 56.
(400 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F10M 1
(800 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 4+ See Control Bus Connectors on page 56.
Control bus splice 20-750-MCTRLBUS-SPL 1 See Control Bus Splice on page 56.
Vent, input bay (400 mm wide) 20-750-MVENTC2-F8M 1 For rating and specification information, see Ventilation Assemblies on page 59.
For temperature specification, see Ventilation Kit Temperature Specifications on page 60.
Vent, power bay (800 mm wide) 20-750-MVENTn-F10M 1
Power and LCL filter module 20-750-MMNT1-F10M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58.
mounting brackets
Bus support panels, upper 20-750-MIPNL3-F8M 1 See Bus Support Side Panels on page 59.
Bus support panels, lower 20-750-MCPNL1-F8M 1
Baffle (800 mm) 20-750-MIBAF1-F10M 1 See Baffle Assemblies on page 59.
DC bus conditioner 20-750-MDCBUS-COND, or Quantity based on the ground scheme. See DC Bus Conditioner on page 52.
20-750-MDCBUS1-COND
(1) For frame 8…10 drives, choose either cat. no. 20-750-MCPOD1-F8M (PowerFlex 755TL, low harmonic) or cat. no. 20-750-MCPOD2-F8M (PowerFlex 755TR, regenerative).
(2) This kit does not contain fuses.
1
3 4
400 600
(15.7) (23.6)
5 6
Enclosures that are shown are 600 mm (23.6 in) deep.
Frame 8 PowerFlex 755TM Bus Supply Major IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
Control bus assembly, input bay (400 20-750-MCBUS1-IB-F8M 1 See Control Bus Assemblies on page 56
mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 1
(600 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 3+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 1 See Control Bus Splice on page 56
Vent, input bay (400 mm) 20-750-MVENTC2-F8M 1 For rating and specification information, see Ventilation Assemblies on page 59.
For temperature specification, see Ventilation Kit Temperature Specifications on page 60.
Vent, power bay (600 mm) 20-750-MVENTn-F9M 1
Power and LCL filter module 20-750-MMNT1-F9M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
mounting brackets
Bus support panels, upper 20-750-MIPNL3-F8M 1 See Bus Support Side Panels on page 59.
Bus support panels, lower 20-750-MCPNL1-F8M 1
Baffle (600 mm) 20-750-MIBAF1-F9M 1 See Baffle Assemblies on page 59.
DC bus conditioner 20-750-MDCBUS-COND, or For specification and rating information, see DC Bus Conditioner on page 52. (Quantity based on the ground scheme.)
20-750-MDCBUS1-COND
300 400
(11.8) (15.7)
4 5
Enclosures that are shown are 600 mm (23.6 in) deep.
Frame 8 PowerFlex 755TM Common Bus Inverter IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
Control bus assembly, input bay (400 20-750-MCBUS1-IB-F8M 1 See Control Bus Assemblies on page 56
mm)
Control bus assembly, control bay 20-750-MCBUS1-CB-F8M 1 See Control Bus Assemblies on page 56
(300 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 1+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 1 See Control Bus Splice on page 56
Vent, control bay (300 mm wide) 20-750-MVENTC2-F8M 1 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (400 mm wide) 20-750-MVENTn-F8M 1
Power module mounting bracket 20-750-MMNT1-F8M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
Bus support side panels, upper and 20-750-MIPNL2-F8M 1 See Bus Support Side Panels on page 59
lower
Baffle (400 mm) 20-750-MIBAF1-F10M 1 See Baffle Assemblies on page 59
(1) Can be installed in the control bay.
(2) Quantity changes when the common bus inverter is with a torque accuracy module.
4 3 4 5 5
Frame 9 PowerFlex 755TL or PowerFlex 755TR Drive IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
AC input bus bar and fuses 20-750-MACLx-F9M 1 For specification and rating information, see AC Input Link Bus Bar and Fuse Assemblies on page 55.
AC common mode cores 20-750-MACCM1-F8M 1 For selection information, see AC Common Mode Core on page 55.
AC common mode core assembled on the LCL filter module if EMC filtering is required.
DC bus bar (800 mm) 20-750-MDCBUS8-nKn 1 For bus material, see DC Bus Bars on page 56.
DC bus bar splice 20-750-MDCSPL1-nKn 2 For splice material, see DC Bus Bar Splices on page 56.
AC bus bar (800 mm) 20-750-MACBUS8-nKn 1 For bus material, see AC Input Bus Bars on page 54.
AC bus bar splice 20-750-MACSPL2-F9M 1 For splice material, see AC Bus Bar Splices on page 54.
Control bus assembly, input bay, 20-750-MCBUS1-IB-F9M 1 See Control Bus Assemblies on page 56
(600 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F10M 1
(800 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 1
(600 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 6+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 2 See Control Bus Splice on page 56
Vent, input bay 20-750-MVENTC2-F8M 2 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (600 mm) 20-750-MVENTn-F9M 1
Vent, power bay (800 mm) 20-750-MVENTn-F10M 1
Power and LCL filter module 20-750-MMNT1-F9M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
mounting brackets
20-750-MMNT1-F10M 1
Bus support panels, upper 20-750-MIPNL1-F8M 1 See Bus Support Side Panels on page 59.
Bus support panels, lower 20-750-MCPNL1-F8M 1
Bus support panels, upper and lower 20-750-MIPNL2-F8M 1
Baffle (600 mm) 20-750-MIBAF1-F9M 1 See Baffle Assemblies on page 59
Baffle (800 mm) 20-750-MIBAF1-F10M 1
DC bus conditioner 20-750-MDCBUS-COND, or See DC Bus Conditioner on page 52. (Quantity based on the ground scheme.)
20-750-MDCBUS1-COND
(1) For frame 8…10 drives, choose either cat. no. 20-750-MCPOD1-F8M (PowerFlex 755TL, low harmonic) or cat. no. 20-750-MCPOD2-F8M (PowerFlex 755TR, regenerative).
4 3 4
600 800
(23.6) (31.5)
5 6
Enclosures that are shown are 600 mm (23.6 in) deep.
3 3
300 600
(11.8) (23.6)
4 5
Enclosures that are shown are 600 mm (23.6 in) deep.
Frame 9 PowerFlex 755TM Common Bus Inverter IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
Control bus assembly, control bay, 20-750-MCBUS1-CB-F8M 1 See Control Bus Assemblies on page 56
(300 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 1
(600 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 2+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 1 See Control Bus Splice on page 56
Vent, control bay (300 mm) 20-750-MVENTC2-F8M 1 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (600 mm) 20-750-MVENTx-F9M 1
Power module mounting bracket 20-750-MMNT1-F9M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
Bus support side panels, upper and 20-750-MIPNL2-F8M 1 See Bus Support Side Panels on page 59
lower
Baffle (600 mm) 20-750-MIBAF1-F9M 1 See Baffle Assemblies on page 59
(1) Quantity changes when the common bus inverter is used with a torque accuracy module.
1 2
7 Power bay, 800 mm (31.5 in.) wide
8 DC bus conditioner
4 3 4 3 4 5 5 5
Frame 10 PowerFlex 755TL or PowerFlex 755TR Drive IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
LCL filter and two line side 20-750-MACR1-F9M 1 For specification and rating information, see Stab Receptacles on page 55 to match power module rating.
converters back panel and stab
receptacles (800 mm)
LCL filter and one line side converter 20-750-MACR1-F8M 1
back panel and stab receptacles
(600 mm)
Three motor side inverters back 20-750-MIRn-F10M 1
panel and stab receptacles
(800 mm)
DC link/fuse assembly 20-750-MDCL1-xx-F8M 6 For rating information, see DC Link/Fuse Assemblies on page 52.
DC common mode cores 20-750-MDCCM1-F8M 6 For selection information, see DC Common Mode Core on page 53.
DC common mode core assembled on the DC link/fuse assembly if EMC filtering is required.
AC input bus bars and fuses 20-750-MACLn-F9M 2 For specification and rating information, see AC Input Link Bus Bar and Fuse Assemblies on page 55.
AC common mode cores 20-750-MACCM1-F8M 2 For selection information, see AC Common Mode Core on page 55.
AC common mode core assembled on the LCL filter module if EMC filtering is required.
DC bus bar (600 mm) 20-750-MDCBUS6-nKn 1
For bus material, see DC Bus Bars on page 56.
DC bus bar (800 mm) 20-750-MDCBUS8-nKn 2
DC bus splice 20-750-MDCSPL1-nKn 2 For splice material, see DC Bus Bar Splices on page 56.
AC bus bar (600 mm) 20-750-MACBUS6-nKn 1 For bus material, see AC Input Bus Bars on page 54.
AC bus bar (800 mm) 20-750-MACBUS8-nKn 1
AC bus bar (1000 mm) 20-750-MACBUS10-nKn 1
AC bus splice, converter power bay 20-750-MACSPL2-nKn 2 For splice material, see AC Bus Bar Splices on page 54.
AC bus splice, inverter power bay 20-750-MACSPL1-nKn 1
Control bus assembly, input bay 20-750-MCBUS1-IB-F10M 1 See Control Bus Assemblies on page 56
(1000 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F10M 2
(800 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 1
(600 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 8+ See Control Bus Connectors on page 56
20-750-MCTRLBUS-CONN2 1
Control bus splice 20-750-MCTRLBUS-SPL 3 See Control Bus Splice on page 56
Vent, input bay (1000 mm) 20-750-MVENTCn-F11M 1
Vent, power bay (800 mm) 20-750-MVENTn-F10M 2 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (600 mm) 20-750-MVENTn-F9M 1
Power and LCL filter module 20-750-MMNT1-F9M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
mounting
20-750-MMNT1-F10M 2
Bus support panels, lower, input bay 20-750-MIBPNL1-F10M 1 See Bus Support Side Panels on page 59
(1000 mm)
Bus support panels, upper 20-750-MIPNL1-F8M 2
Bus support panels, lower 20-750-MCPNL1-F8M 2
Bus support panels, upper and lower 20-750-MIPNL2-F8M 1
Baffle (600 mm) 20-750-MIBAF1-F9M 1 See Baffle Assemblies on page 59
Baffle (800 mm) 20-750-MIBAF1-F10M 2
DC bus conditioner 20-750-MDCBUS-COND, or See DC Bus Conditioner on page 52. (Quantity based on the ground scheme.)
20-750-MDCBUS1-COND
(1) For frame 8…10 drives, choose either cat. no. 20-750-MCPOD1-F8M (PowerFlex 755TL, low harmonic) or cat. no. 20-750-MCPOD2-F8M (PowerFlex 755TR, regenerative).
1 2
4 3 4 3 4
3 3 3
300 800
(11.8) (31.5)
4 5
Enclosures that are shown are 600 mm (23.6 in) deep.
Frame 10 PowerFlex 755TM Common Bus Inverter IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
Control bus assembly, control bay 20-750-MCBUS1-CB-F8M 1 See Control Bus Assemblies on page 56
(300 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F10M 1
(800 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 3+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 1 See Control Bus Splice on page 56
Vent, control bay (300 mm) 20-750-MVENTC2-F8M 1 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (800 mm) 20-750-MVENTx-F10M 1
Power module mounting bracket 20-750-MMNT1-F10M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
Bus support panels, upper and lower 20-750-MIPNL2-F8M 1 See Bus Support Side Panels on page 59
Baffle (800 mm) 20-750-MIBAF1-F10M 1 See Baffle Assemblies on page 59
(1) Quantity changes when the common bus inverter is used with a torque accuracy module.
1 2
7 Power bay, 800 mm (31.5 in.) wide
8 DC bus conditioner
4 3 4 4 3 4 5 5 5 5
1 2
4 3 4 4 3 4
3 3 3 3
Frame 11 PowerFlex 755TM Common Bus Inverter IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
Control bus assembly, control bay 20-750-MCBUS1-CB-F8M 1 See Control Bus Assemblies on page 56
(300 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 2
(600 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 4+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 2 See Control Bus Splice on page 56
Vent, control bay (300 mm) 20-750-MVENTC2-F8M 1 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (600 mm) 20-750-MVENTx-F9M 2
Power module mounting bracket 20-750-MMNT1-F9M 2 See Power and LCL Filter Module Floor and Support Brackets on page 58
Bus support side panels, upper and 20-750-MIPNL2-F8M 2 See Bus Support Side Panels on page 59
lower
Baffle (600 mm) 20-750-MIBAF1-F9M 2 See Baffle Assemblies on page 59
(1) Quantity changes when the common bus inverter is with a torque accuracy module.
1 2
4 3 4 4 3 4 3 4
3 3 3 3 3
Frame 12 PowerFlex 755TM Common Bus Inverter IP00 Component Kits (continued)
Module or Kit Name Catalog Number Qty. Description
DC precharge module (optional) 20-750-MDCPn-xx-F8M 5 For specification and rating information, see DC Precharge Modules on page 52
DC common mode core 20-750-MDCCM1-F8M 5 For selection information, see DC Common Mode Core on page 53.
DC common mode core assembled on the DC link/fuse assembly if EMC filtering is required.
DC bus bar (300 mm) 20-750-MDCBUS3-xKx 1 For specification and rating information, see DC Bus Bars on page 56.
DC bus bar (600 mm) 20-750-MDCBUS6-xKx 1
DC bus bar (800 mm) 20-750-MDCBUS8-xKx 1
DC bus splice 20-750-MDCSPL1-xKx 2 For splice material, see DC Bus Bar Splices on page 56.
Control bus assembly, control bay 20-750-MCBUS1-CB-F8M 1 See Control Bus Assemblies on page 56
(300 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F9M 1
(600 mm)
Control bus assembly, power bay 20-750-MCBUS1-PB-F10M 1
(800 mm)
Control bus connector 20-750-MCTRLBUS-CONN1 5+ See Control Bus Connectors on page 56
Control bus splice 20-750-MCTRLBUS-SPL 2 See Control Bus Splice on page 56
Vent, control bay (300 mm) 20-750-MVENTC2-F8M 1 For specification and rating information, see Ventilation Assemblies on page 59.
Vent, power bay (600 mm) 20-750-MVENTx-F9M 1
Vent, power bay (800 mm) 20-750-MVENTx-F10M 1
Power module mounting bracket 20-750-MMNT1-F9M 1 See Power and LCL Filter Module Floor and Support Brackets on page 58
20-750-MMNT1-F10M 1
Bus support side panels, upper and 20-750-MIPNL2-F8M 2 See Bus Support Side Panels on page 59
lower
Baffle (600 mm) 20-750-MIBAF1-F9M 1 See Baffle Assemblies on page 59
Baffle (800 mm) 20-750-MIBAF1-F10M 1
(1) Quantity changes when the common bus inverter is with a torque accuracy module.
kW Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No.
Qty. at 696V DC Qty. at 650V DC Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750-
(LD/ND/HD) (LD/ND/HD)
250/200/160 1 MI1-E242F215 237/192/153 272/221/176 1 MIn-E242F215 292/237/188 265/215/171 1 ML1-E395F370
315/250/200 1 MI1-E295F265 295/237/192 339/272/221 1 MIn-E295F265 364/292/237 330/265/215 1 ML1-E395F370
355/315/250 1 MI1-E355F330 331/295/237 380/339/272 1 MIn-E355F330 408/364/292 370/330/265 1 ML1-E395F370
400/355/315 1 MI1-E395F370 371/331/295 426/380/339 1 MIn-E395F370 457/408/364 415/370/330 1 ML1-E395F370
450/400/355 1 MI1-E435F415 411/371/331 472/426/380 1 MIn-E435F415 507/457/408 460/415/370 1 ML1-E545F505
560/500/400 1 MI1-E545F505 505/452/371 580/518/426 1 MIn-E545F505 623/556/457 565/505/415 1 ML1-E545F505
(1) Motor side inverters have filter options: MI1 = no filter, MI2 = with paralleling inductor, MI3 = with reflective wave filter.
kW Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No.
Qty. at 580V DC Qty. at 540V DC Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750-
(LD/ND/HD) (LD/ND/HD)
560/500/400 2 MI2-C460D430 972/860/720 1116/987/826 2 MIn-C460D430 1198/1060/887 1040/920/770 1 ML1-C1K1D1K0
630/560/500 2 MI2-C540D505 1019/972/860 1170/1116/987 2 MIn-C540D505 1256/1198/1060 1090/1040/920 1 ML1-C1K1D1K0
710/630/500 2 MI2-C585D545 1105/1039/972 1268/1193/1116 2 MIn-C585D545 1361/1281/1198 1182/1112/1040 1 ML1-C1K4D1K3
800/710/560 2 MI2-C650D617 1370/1099/1019 1572/1261/1170 2 MIn-C650D617 1688/1354/1256 1465/1175/1090 1 ML1-C1K4D1K3
850/800/630 2 MI2-C770D740 1478/1368/1099 1696/1570/1261 2 MIn-C770D740 1821/1685/1354 1581/1465/1175 1 ML1-C1K4D1K3
(1) Motor side inverters have filter options: MI1 = no filter, MI2 = with paralleling inductor, MI3 = with reflective wave filter.
Hp Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No.
Qty. at 696V DC Qty. at 650V DC Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750-
(LD/ND/HD) (LD/ND/HD)
800/700/600 2 MI2-C460D430 860/717/663 987/823/761 2 MIn-C460D430 1060/883/817 960/800/740 1 ML1-C1K1D1K0
900/800/700 2 MI2-C540D505 936/860/717 1075/987/823 2 MIn-C540D505 1154/1060/883 1045/960/800 1 ML1-C1K1D1K0
1000/900/750 2 MI2-C585D545 1004/936/860 1153/1075/987 2 MIn-C585D545 1238/1154/1060 1135/1045/960 1 ML1-C1K4D1K3
1100/1000/800 2 MI2-C650D617 1223/1017/936 1404/1167/1075 2 MIn-C650D617 1507/1253/1154 1365/1135/1045 1 ML1-C1K4D1K3
1250/1100/900 2 MI2-C770D740 1362/1223/1017 1563/1404/1167 2 MIn-C770D740 1678/1507/1253 1520/1365/1135 1 ML1-C1K4D1K3
(1) Motor side inverters have filter options: MI2 = with paralleling inductor, MI3 = with reflective wave filter.
kW Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No.
Qty. at 1000V DC Qty. at 932V DC Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750-
(LD/ND/HD) (LD/ND/HD)
630/560/500 2 MI2-E355F330 581/505/452 580/580/518 2 MIn-E355F330 716/623/556 650/565/505 1 ML1-E760F735
710/630/560 2 MI2-E395F370 657/581/505 754/667/580 2 MIn-E395F370 810/716/623 735/650/565 1 ML1-E760F735
800/710/630 2 MI2-E435F415 733/657/581 842/754/667 2 MIn-E435F415 904/810/716 820/735/650 1 ML1-E760F735
900/800/710 2 MI2-E435F415 823/733/657 944/842/754 2 MIn-E435F415 1014/904/810 920/820/735 1 ML1-E980F920
1000/900/800 2 MI2-E545F505 960/823/733 1102/944/842 2 MIn-E545F505 1183/1014/904 1074/920/820 1 ML1-E980F920
(1) Motor side inverters have filter options: MI2 = with paralleling inductor, MI3 = with reflective wave filter.
kW Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No. Cat. No.
Qty. at 1000V DC Qty. at 932V DC Qty. Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750- 20-750-
(LD/ND/HD) (LD/ND/HD)
1100/1000/900 3 MI2-E435F415 1028/921/823 1180/1057/944 3 MIn-E435F415 1267/1135/1014 1150/1030/920 1 ML1-E980F920 1 ML1-E545F505
1250/1100/1000 3 MI2-E435F415 1202/1028/921 1380/1180/1057 3 MIn-E435F415 1481/1267/1135 1344/1150/1030 1 ML1-E980F920 1 ML1-E545F505
1500/1400/1100 3 MI2-E545F505 1365/1269/1039 1624/1456/1193 3 MIn-E545F505 1743/1564/1280 1582/1419/1162 1 ML1-E980F920 1 ML1-E545F505
(1) Motor side inverters have filter options: MI2 = with paralleling inductor, MI3 = with reflective wave filter.
Hp Cat. No. Input Amps Output Amps Cat. No. Input Amps Output Amps Cat. No.
Qty. at 696V DC Qty. at 650V DC Qty.
(LD/ND/HD) 20-750- (LD/ND/HD) 20-750- (LD/ND/HD) 20-750-
(LD/ND/HD) (LD/ND/HD)
2600/2400/2000 4 MI2-C770D740 2652/2453/2007 3044/2816/2304 4 MIn-C770D740 3268/3023/2473 2960/2738/2240 2 ML1-C1K4D1K3
(1) Motor side inverters have filter options: MI2 = with paralleling inductor, MI3 = with reflective wave filter.
20-750-MI1-C302D302 20-750-MI3-C302D302 400 302 1400 141 (312) 240V AC Supply: 2.84
(170M6467)
480 302 With packaging: 24V DC Supply: 1.5
20-750-MI1-C367D361 20-750-MI3-C367D361 400 367 192 (424)
480 361
20-750-MI1-C460D430 20-750-MI3-C460D430 400 460
480 430
20-750-MI1-C540D505 20-750-MI2-C540D505 20-750-MI3-C540D505 400 540
480 505
20-750-MI1-C585D545 20-750-MI2-C585D545 20-750-MI3-C585D545 400 585
480 545
20-750-MI1-C650D617 20-750-MI2-C650D617 20-750-MI3-C650D617 400 650
480 617
20-750-MI1-C750D710 20-750-MI2-C750D710 20-750-MI3-C750D710 400 750
480 710
20-750-MI1-C770D740 20-750-MI2-C770D740 20-750-MI3-C770D740 400 770
480 740
20-750-MI1-E242F215 20-750-MI3-E242F215 600 242 1100
(170M6499)
690 215
20-750-MI1-E295F265 20-750-MI3-E295F265 600 295
690 265
20-750-MI1-E355F330 20-750-MI2-E355F330 20-750-MI3-E355F330 600 355
690 330
20-750-MI1-E395F370 20-750-MI2-E395F370 20-750-MI3-E395F370 600 395
690 370
20-750-MI1-E435F415 20-750-MI3-E435F415 600 435
20-750-MI2-E435F415
690 415
20-750-MI1-E545F505 20-750-MI2-E545F505 20-750-MI3-E545F505 600 545
20-750-MI1-E545F505C (1) 20-750-MI2-E545F505C (1) 20-750-MI3-E545F505C (1)
690 505
(1) The letter ‘C’ at the end of a catalog number indicates that the module uses all-copper components.
240V Distribution Terminal Block Jumper (used with TB2) (Supplier: Rockwell Automation)
Cat. No. Voltage Jumper Positions Qty. Equivalent Frame Size
1492-CJJ8-2 400/480/600/ 2 2 8, 9
690
1492-CJJ8-3 400/480/600/ 3 2 10, 11
690
1492-CJJ10-3 400/480/600/ 3 2 12
690
1492-CJJ6-2 400/480/600 2 2 8
1492-CJJ5-2 690 2 2 8
1492-CJJ6-3 400/480/600/ 3 2 9, 10
690
1492-CJJ12-3 400/480/600/ 3 2 11
690
1492-CJJ16-4 400/480/600/ 3 2 12
690
DC Precharge Modules
Fuse Rating
Amps Max Weight Power Consumption
No Filtering With DC Common Mode Core Voltage Amps/leg
(normal duty) kg (lb) Amps
(1/leg)
20-750-MDCP1-CD-F8M 20-750-MDCP2-CD-F8M 400 887 1400 41 (90) 240V AC Supply: 0.6
(170M6467)
480 817
With packaging: 24V DC Supply: 0.5
20-750-MDCP1-EF-F8M 20-750-MDCP2-EF-F8M 600 602 1100 44 (97)
(170M6499)
690 556
DC Link/Fuse Assemblies
Amps Amps
Voltage Cat. No. Cat. No.
(normal duty) (normal duty)
400 887 20-750-MDCL1-CD-F8M 798 20-750-MDCL2-CD-F8M
20-750-MDCL3-CD-F8M(1)
480 817 735
600 602 20-750-MDCL1-EF-F8M 542 20-750-MDCL2-EF-F8M
20-750-MDCL3-EF-F8M (1)
690 556 501
(1) For right-to-left configuration.
DC Bus Conditioner
Cat. No. Input Voltage Amps Equivalent Frame Size
20-750-MDCBUS-COND 1000V DC 100 8…12
20-750-MDCBUS1-COND(1) 1000V DC 100 8…12
(1) Suitable for use on a high-resistance ground or ungrounded distribution system in a marine application (for example, ship or
marine vessel).
TVSS Modules
Cat. No. Voltage
20-750-MACP-CD-TVSS 400/480
20-750-MACP-EF-TVSS 600/690
Assemblies
AC Input Bus Bars
Cabinet Width Thickness Weight
Cat. No. Voltage Cabinet Type Material Equivalent Frame Size
mm (in.) mm (in.) kg (lb)
20-750-MCNCTAC-F8 600/690 400 (16) Input bay Aluminum 12.7 (0.5) < 22.7 (50) 8
20-750-MCNCTAC-F9 600/690 600 (24) Input bay Aluminum 12.7 (0.5) < 22.7 (50) 9
20-750-MACBUS6-3K0 600/690 600 (24) Power bay Aluminum 27 (1.1) < 22.7 (50) 9
20-750-MACBUS6-4K7 600/690 600 (24) Power bay Copper 27 (1.1) 37.8 (84) 10
20-750-MACBUS8-3K0 600/690 800 (31) Power bay Aluminum 27 (1.1) < 22.7 (50) 10
20-750-MACBUS8-4K7 600/690 800 (31) Power bay Copper 27 (1.1) 57.2 (127) 10
20-750-MACBUS10-3K0 600/690 1000 (39) Input bay Aluminum 27 (1.1) < 22.7 (50) 10…12
20-750-MACBUS10-4K7 600/690 1000 (39) Input bay Copper 27 (1.1) 65.7 (146) 10…12
Stab Receptacles
Cabinet Width Weight Equivalent
Cat. No. Voltage Cabinet Type With Back Panel Material Frame Size Module
mm (in.) kg (lb)
20-750-MDCREC1-F8M 600/690 – Power bay Yes Aluminum < 22.7 (50) 8…12 DC precharge
(1)
20-750-MDCREC1-F8MC 600/690 – Power bay Yes Copper < 22.7 (50) 8…12 DC precharge
20-750-MREC1-F8M(2) 600/690 – Power bay No Aluminum < 22.7 (50) 8 LCL filter or power module
(1)(2)
20-750-MREC1-F8MC 600/690 – Power bay No Copper < 22.7 (50) 8 LCL filter or power module
20-750-MIR1-F8M 600/690 400 (16) Power bay Yes Aluminum < 22.7 (50) 8 Single inverter
20-750-MIR1-F9M 600/690 600 (24) Power bay Yes Aluminum < 22.7 (50) 9, 11, 12 2 parallel inverters
20-750-MIR1-F10M 600/690 800 (31) Power bay Yes Aluminum 30 (66) 10, 12 3 parallel inverters
20-750-MIR2-F9M 600/690 600 (24) Power bay Yes Copper 29 (65) 9, 11, 12 2 parallel inverters
20-750-MIR2-F10M 600/690 800 (31) Power bay Yes Copper 43 (96) 10, 12 3 parallel inverters
20-750-MACR1-F8M 600/690 600 (24) Power bay Yes Aluminum 28 (60) 8, 10, 12 LCL filter and single converter
20-750-MACR2-F8M(3) 600/690 600 (24) Power bay Yes Aluminum 28 (60) 8, 10, 12 LCL filter and single converter
20-750-MACR1-F9M 600/690 800 (31) Power bay Yes Aluminum 39 (86) 9…12 LCL filter and two converters
20-750-MADR1-F8M 600/690 800 (31) Power bay Yes Aluminum 32 (70) 8 LCL filter, one converter and
one inverter
20-750-MADR2-F8M(3) 600/690 800 (31) Power bay Yes Aluminum 32 (70) 8 LCL filter, one converter and
one inverter
(1) The letter ‘C’ at the end of a catalog number indicates that the stab receptacle uses copper components.
(2) This kit is a stab receptacle sub-assembly. Purchase the kit (one per power or LCL filter module) instead of the back panel with stab receptacles, or to replace a subassembly on a back panel.
(3) For right-to-left configuration.
DC Bus Bars
Cabinet Width Thickness Weight Equivalent Frame
Cat. No. Cabinet Type Material Amps (1)
mm (in.) mm (in.) kg (lb) Size(2)
20-750-MDCBUS3-3K0 300 (12) Control bay Aluminum 27 (1.1) < 22.7 (50) 3000 8…12
20-750-MDCBUS3-4K7 300 (12) Control bay Copper 37 (1.5) < 22.7 (50) 4700 8…12
20-750-MDCBUS4-3K0 400 (16) Power bay Aluminum 27 (1.1) < 22.7 (50) 3000 8…10
20-750-MDCBUS4-4K7 400 (16) Power bay Copper 37 (1.5) < 22.7 (50) 4700 8…10
20-750-MDCBUS6-3K0 600 (24) Power bay Aluminum 27 (1.1) < 22.7 (50) 3000 8…10
20-750-MDCBUS6-4K7 600 (24) Power bay Copper 37 (1.5) 25.2 (56) 4700 8…12
20-750-MDCBUS8-3K0 800 (31) Power bay Aluminum 27 (1.1) < 22.7 (50) 3000 9…10
20-750-MDCBUS8-4K7 800 (31) Power bay Copper 37 (1.5) 39.5 (87) 4700 8…12
20-750-MDCBUS10-3K0 1000 (39) Input bay Aluminum 27 (1.1) < 22.7 (50) 3000 11
20-750-MDCBUS10-4K7 1000 (39) Input bay Copper 37 (1.5) 47.7 (106) 4700 10…12
(1) See Extruded DC Bus Derating Guidelines on page 71 for maximum amp rating and derating information.
(2) Frame 8…10 use the aluminum bus bar for standard 3000 A.
Frame 8…10 use the copper bus bar for optional 4700 A.
Frame 11…12 use the copper bus bar for all installations.
Match splice material to the bus bar that is installed. So, if the bus changes from aluminum to copper, then both aluminum and copper splice is needed.
Cabinet-Level Kits
The Rittal TS8 enclosures that are listed in these tables are the only enclosures recommended for use with PowerFlex 755TM IP00 / Open Type
kits. The tables provide the overall enclosure dimensions and vendor part number. The enclosures listed in these tables are designed to meet
EN61800-3 Category C3 EMC requirements. Rockwell Automation is evaluating the ability to meet Category C2 compliance. Contact the factory
for more information. The PowerFlex 750TM EMC C2 filter wire bay (on page 58) is used only with the EMC C2 filter kits used for PowerFlex
755T product installations that require compliance with CE EN61800-3 Category C2 for conducted emissions only.
See EMC C2 Filter Kits on page 53 for more information.
These enclosures contain the roof and floor panels, side rails, and door accessory and ventilation openings, unless noted otherwise. Some enclosures
include the vents and fans that are required to meet PowerFlex 755TM product specifications (as noted in the table footnotes).
Use the joining hardware kit, catalog number 20-750-MEXTBAY1, to join all Rittal TS8 enclosures. Kits for seismic qualified installations are
available for use with the recommended Rittal TS8 enclosures listed here. See Kits for Seismic-qualified Installations on page 58 for kit certifications
and details.
PowerFlex 750TM EMC C2 Filter Wire Bay and Required Accessories (1)
Description Enclosure Type Width mm (in.) Depth mm (in.) Height mm (in.) Rittal Model Number Rockwell Automation Cat. No.
EMC C2 Filter Wire Bay (2) Standard Enclosure 800 (31.5) 600 (23.6) 2000 (78.7) 8806.500 20-750-MPBAY-800
(3)
Side Panels (Qty 2) Standard Enclosure – 600 (23.6) 2000 (78.7) 8106.235 –
(4)
Gland Plate Standard Enclosure 220 (8.7) 90 (3.5) – 1158.500 –
(4)
Gland Plate Standard Enclosure 160 (6.3) 70 (2.8) – 2560.400 –
Gland Plate (4) Standard Enclosure 330 (13.0) 90 (3.5) – 2561.400 –
(4)
Gland Plate Standard Enclosure 339 (13.3) 249 (9.8) – 2562.400 –
(4)
Gland Plate Standard Enclosure 534 (21.0) 149 (5.9) – 2563.150 –
(1) This enclosure is used with the EMC C2 filter kits for PowerFlex 755T product installations that require compliance with CE EN61800-3 Category C2 for conducted emissions only. See EMC C2 Filter Kits on page 62 for more
information.
(2) Customer must provide appropriate guards to prevent electric shock hazard.
(3) Must be ordered with the optional wire bay (8806.500). Only one side panel is used in the installation.
(4) Must be ordered with the optional wire bay (8806.500). Order the appropriate gland plate(s) based on input wiring needs.
Baffle Assemblies
Catalog Number Cabinet Width (mm) Cabinet Type Equivalent Frame Size
20-750-MIBAF1-F8M 400 (16) Power bay 8 (Common Bus Inverter)
20-750-MIBAF1-F9M 600 (24) Power bay 8…12
20-750-MIBAF1-F10M 800 (31) Power bay 8…12
Ventilation Assemblies
Cat. No. Cabinet Width mm (in.) Vent Kit Height(1) mm (in.) Cabinet Type Enclosure Rating Equivalent Frame Size
20-750-MVENT1-F8M 400 (16) 132 (5.2) Power bay IP21, UL Type 1 8
20-750-MVENT1-F9M 600 (24) Power bay IP21, UL Type 1 8…12
20-750-MVENT1-F10M 800 (31) Power bay IP21, UL Type 1 8…12
20-750-MVENT2-F8M 400 (16) 291 (11.5) Power bay IP54(2) 8
20-750-MVENT2-F9M 600 (24) Power bay IP54(2) 8…12
(2)
20-750-MVENT2-F10M 800 (31) Power bay IP54 8…12
20-750-MVENTC1-F11M 1000 (39) 105.70 (4.2) Input bay IP21, UL Type 1 10…12
(2)
20-750-MVENTC2-F8M 400 (16) 105.70 (4.2) Input bay IP54 8
600 (24) Input bay IP21, UL Type 1 9
IP54(2)
300 (12) Control bay IP21, UL Type 1 8…12
IP54(2)
20-750-MVENTC2-F11M 1000 (39) 105.70 (4.2) Input bay IP54(2) 10…12
(2)
SK-RM-WBDR-FANFLR1 400 (16) Not applicable Wire bay IP54 8…10
SK-RM-WBDR-FANFLR2 800 (31) Not applicable Wire bay IP54(2) 11…12
(1) This height is added to the height of the bay.
(2) Installed as per instruction
Accessories
Control Pod Assemblies (1)
Power Consumption
Cat. No. Equivalent Frame Size Airflow
Amps
20-750-MCPOD1-F8M(2) 8…12 240V AC Supply: 0.0 40 CFM
(3) 24V DC Supply: 5.5
20-750-MCPOD2-F8M 8…10
(1) Control pod includes the main control circuit board and fiber transceiver circuit board.
(2) Control pod for regenerative and low harmonic drives, bus supplies, and common bus inverters.
(3) Control pod for low harmonic frame 8…10 drives and common bus inverters.
Fiber-optic Cables
Common Bus Common Bus
Common Bus Common Bus
Length mm Inverter Inverter Bus Supplies Bus Supplies Drives (right ACPC To POD Inverter TAM Inverter TAM Drives TAM -
Cat. No. Power Mod. Power Mod. (right to left Drives - Qty to left
(in.) to POD1 - to POD2 - - Qty config.) - Qty config.) - Qty - Qty To POD1 - To POD2 - Qty
Qty(1) Qty(2)
Qty(1) Qty (2)
Equipment Handling
Cat. No. Description Reference Publication
20-750-MCART1 Power / LCL filter module service cart 750-IN105
20-750-MCART2 DC precharge module lift 750-IN107
20-750-MRAMP1 Power module service ramp 750-IN108
20-750-MINV-ATIP Power / LCL filter module storage 750-IN106
hardware
Design Considerations
Input Voltage Tolerance
Nominal Line Nominal Motor Drive Full Power Drive Operating
Drive Rating
Voltage Voltage Range Range
380…480 380 380 380…528 348…528V
Hp @ Motor (Drive Output)
EXAMPLE Calculate the maximum power of a 500 Hp, 460V motor connected to a 500 Hp
480V rated drive supplied with 342V Actual Line Voltage input.
Hp @ Motor (Drive Output)
370 Hp
• Actual Line Voltage / Nominal Motor Voltage = 74.3%
• 74.3% x 500 Hp = 370 Hp
• 74.3% x 60 Hz = 44.6 Hz
No Drive
At 342V Actual Line Voltage, the maximum power the 500 Hp, 460V Output
motor can produce is 370 Hp at 44.6 Hz.
342V 480V
460V 528V
IMPORTANT For maximum protection of the drive and its internal components, Rockwell Automation requires the use of fast acting semiconductor fuses to other
methods of circuit protection to remain in compliance, at least from module perspective, with agency evaluation. This method reduces risk of drive damage
from power quality events, and improves machine and process utilization, thus maximizing productivity. See the Fuse and Circuit Breaker Ratings section in
publication 750-TD100 for more information that is based on equivalent standard enclosed products.
This Frame 8 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP54
rating.
Frame 8, IP54
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Power Power LCL
Door ACPC Supply Mod. Filter Roof Ctrl. Power DCPC
Roof Fan Fan Module Bulletin Mod. Fan POD Mod. Mod.
1606
Quantity 1 0 1 1 1 1 1 1 1 1 2 1 - - -
Current at 0.25 0.5 0.35 2.49 2.49 0.25 0.35 2.49 0.5 3.5 0.39 13.56 12.46 20 A (400V,
240V AC 480V, 600V,
(Amp) 690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 9 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP21
rating.
Frame 9, IP21
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Total Load on Fuse (FH2)
Bay Bay Vent Bay Load FH2 Max. Ampacity
Fan (Entry / (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC Exit) Fan
Fan Module Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 0 1 1 2 1 1 1 2 2 0 1 - - -
Current at 0.25 0 0.4 0.35 4.98 2.49 0.25 0.35 4.98 1 0.39 15.44 14.44 25 A (400V,
240V AC 480V, 600V,
(Amp) 690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 9 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP54
rating.
Frame 9, IP54
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
Fan Module Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 0 1 1 2 1 1 1 2 2 3 1 - - -
Current at 0.25 0 0.5 0.35 4.98 2.49 0.25 0.35 4.98 1 5.25 0.39 20.79 19.69 35 A (400V,
240V AC 480V, and 600V)
(Amp) 40 A (690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 10 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP21
rating.
Frame 10, IP21
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 3 2 1 1 3 3 0 1 - - -
Current at 0.25 0.78 0.4 0.35 7.47 4.98 0.25 0.35 7.47 1.5 0.78 24.58 22.8 40 A (400V and
240V AC 690V)
(Amp) 35 A (480V and
600V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 10 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP54
rating.
Frame 10, IP54
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 3 2 1 1 3 3 5 1 - - -
Current at 0.25 0.78 0.5 0.35 7.47 4.98 0.25 0.35 7.47 1.5 8.75 0.78 33.43 31.55 60 A (400V,
240V AC 480V, and 600V)
(Amp) 63 A (690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 11 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP21
rating.
Frame 11, IP21
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 4 2 1 1 4 4 0 1 - - -
Current at 0.25 0.78 0.4 0.35 9.96 4.98 0.25 0.35 9.96 2 0.78 30.06 28.28 45 A (400V,
240V AC 480V, and 600V)
(Amp) 50 A (690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 11 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP54
rating.
Frame 11, IP54
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 4 2 1 1 4 4 6 1 - - -
Current at 0.25 0.78 0.5 0.35 9.96 4.98 0.25 0.35 9.96 2 10.5 0.78 40.66 38.78 70 A (400V,
240V AC 480V, and 600V)
(Amp) 80 A (690V)
Current at
48V DC
(Amp)
Current at
24V DC
(Amp)
Aux
Current at
24V DC
(Amp)
This Frame 12 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP21
rating.
Frame 12, IP21
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 5 3 1 1 5 5 0 1 - - -
Current 0.25 0.78 0.4 0.35 12.45 7.47 0.25 0.35 12.45 2.5 0.78 38.03 36.25 60 A (400V,
at 240V 480V, and 600V)
AC (Amp) 63 A (690V)
Current
at 48V DC
(Amp)
Current
at 24V DC
(Amp)
Aux
Current
at 24V DC
(Amp)
This Frame 12 example has a bus supply (BS), common bus inverter (CBI), circuit breaker, DC precharge (with measured current), and an IP54
rating.
Frame 12, IP54
Input Bay Converter Power Control Bay Inverter Power IP54 Wire Bay Total Load on Fuse (FH2)
Bay Bay Vent (Entry / Load FH2 Max. Ampacity
Fan Exit) Fan (Amp)
Roof Fan Door ACPC Power Power LCL Roof Ctrl. Power DCPC
fan Bucket Supply Mod. Filter Fan POD Mod. Mod.
Bulletin Mod.
1606
Quantity 1 2 1 1 5 3 1 1 5 5 8 1 - - -
Current 0.25 0.78 0.5 0.35 12.45 7.47 0.25 0.35 12.45 2.5 14 0.78 52.13 50.25 90 A (400V,
at 240V 480V, and 600V)
AC (Amp) 100 A (690V)
Current
at 48V DC
(Amp)
Current
at 24V DC
(Amp)
Aux
Current
at 24V DC
(Amp)
Derating Guidelines
The following sections describe conditional derating guidelines. These guidelines are based on equivalent standard enclosed products.
110 All drives, bus supplies, and common bus inverters without DC precharge
100
1 Common bus inverters with DC precharge
90 Operating point
80
2
% of ND Rated Power
70
3
60
4
50
0
0 5 10 15 20 25 30 35 40 45 50 55 60
Ambient Temperature (°C)
400V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
kW Cont. kW Cont. kW Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Amps Amps Amps
45 120
40
100
35
30 80
Max Ambient (°C) 25
Load (%)
60
20G…C302 200 367 160 302 132 260 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C367 250 460 200 367 160 302 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C460 315 540 250 460 200 367 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
400V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…C540 315 585 315 540 250 460 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C585 355 650 315 585 250 472 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C650 400 750 355 650 315 540 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C750 450 796 400 750 315 585 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
400V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…C770 450 832 400 770 355 650 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C920 560 1040 500 920 400 770 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C1K0 630 1090 560 1040 500 920 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C1K1 710 1182 630 1112 500 1040 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
400V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…C1K2 800 1465 710 1175 560 1090 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C1K4 850 1581 800 1463 630 1175 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C1K6 1000 1715 850 1590 710 1465 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C1K7 1250 2150 1000 1715 800 1480 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
400V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…C2K1 1400 2330 1250 2156 1000 1715 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C2K8 1800 3078 1650 2849 1400 2330 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…C3K5 2200 3846 2000 3542 1650 3032 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
480V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Hp Cont. Hp Cont. Hp Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…D302 300 361 250 302 200 248 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D361 350 430 300 361 250 302 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D430 400 485 350 430 300 361 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D505 450 545 400 505 350 430 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
480V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…D545 500 617 450 545 350 454 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D617 600 710 500 617 400 485 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D710 650 765 600 710 450 545 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D740 700 800 650 740 500 617 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
480V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…D800 800 960 700 800 600 740 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D960 900 1045 800 960 700 800 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D1K0 1000 1121 900 1045 750 960 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D1K1 1100 1365 1000 1135 800 1045 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
480V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…D1K3 1250 1520 1100 1365 900 1135 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D1K4 1500 1655 1250 1420 1000 1365 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D1K6 1800 2070 1500 1655 1100 1420 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
480V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…D2K0 2000 2240 1800 2072 1500 1655 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D2K6 2600 2960 2400 2738 2000 2240 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…D3K4 3300 3696 3000 3404 2400 2980 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
600V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Hp Cont. Hp Cont. Hp Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…E242 300 295 250 242 200 192 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E295 350 355 300 295 250 242 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E355 400 395 350 355 300 295 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E395 450 435 400 395 350 355 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
600V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…C435 500 510 450 435 400 395 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E545 600 580 550 545 450 450 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E595 700 690 600 580 550 545 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E690 800 760 700 690 600 595 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
600V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…E760 900 825 800 760 700 690 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E825 1000 980 900 825 800 760 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E980 1100 1102 1000 980 900 825 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E1K1 1250 1220 1100 1045 1000 980 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
600V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Hp Hp Hp
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…E1K2 1500 1430 1250 1220 1100 1045 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E1K5 1600 1624 1500 1430 1250 1220 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E2K0 2100 2146 2000 1946 1800 1700 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…E2K4 2600 2668 2500 2420 2100 2070 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
690V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
kW Cont. kW Cont. kW Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…F215 250 265 200 215 160 171 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F265 315 330 250 265 200 215 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F330 355 370 315 330 250 265 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F370 400 415 355 370 315 330 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
690V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…F415 450 460 400 415 355 370 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F505 560 565 500 505 400 415 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F565 630 650 560 565 500 505 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F650 710 735 630 650 560 565 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
690V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…F735 800 820 710 735 630 650 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F820 900 920 800 820 710 735 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F920 1000 1074 900 920 800 820 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F1K0 1100 1150 1000 1030 900 920 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
690V AC Power Rating Derating for IP21, UL Type 1 and IP54, UL Type 12
Catalog Light Duty Normal Duty Heavy Duty Ambient Temperature/Load Altitude/Load
Number
Cont. Cont. Cont. 1.33 kHz 2 kHz 4 kHz 1.33 kHz 2 kHz 4 kHz
kW kW kW
Amps Amps Amps
45 120
40
100
35
30 80
Load (%)
60
20G…F1K1 1250 1344 1100 1150 1000 1030 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F1K4 1500 1582 1400 1419 1100 1162 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F1K8 2000 2091 1800 1865 1500 1535 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
45 120
40
100
35
30 80
Max Ambient (°C)
25
Load (%)
60
20G…F2K3 2500 2599 2300 2318 2000 2020 20
15 40
10
20
5
0 0
40 50 60 70 80 90 100 0 1000 2000 3000 4000 5000
Load (%) Altitude (m)
Emax
UL Rated Service IEC Rated Service UL Rated Current IEC Rated Current
Altitude m (ft.)
Voltage (V) Voltage (V) (%A) (%A)
<2000 (<6600) 600 690 100 100
3000 (9900) 600 607 98 98
4000 (13200) 500 538 93 93
5000 (16500) 440 469 90 90
Selection Considerations
Type Cable Type Description Min. Insulation Rating
Control Power Unshielded – Per US NEC or applicable national or local code. 300V,
60 °C (140 °F)
Digital I/O Unshielded – Per US NEC or applicable national or local code. 300V,
Safety Inputs 2 (18 AWG), 3 conductor, shielded.
60 °C (140 °F)
Homing Inputs Shielded Multi-conductor 0.750 mm
(1) (3) (4) shielded cable
(1) Signal wires should be separated from power wires by at least 0.3 meters (1 foot).
(2) The use of shielded wire for AC input power is not required, but is always recommended.
(3) If the wires are short and contained within a cabinet which has no sensitive circuits, the use of shielded wire may not be necessary, but is always recommended.
(4) I/O terminals labeled “(–)” or “Common” are not referenced to earth ground and are designed to greatly reduce common mode interference. Grounding these terminals can cause signal noise. For CE installations, 115V I/O must
use shielded cable or have a cable length less than 30 m (98 ft).
(5) The minimum insulation rating for input power wire must be at least equal to the nominal system voltage rating.
Frame Size Input Bay (IB) Fans CFM Per IB Fan Number of Modules CFM Per Module Total CFM Total CMS
(LCL Filter + Line Side Converter)
8 1 275 2 (contained in one power bay) 700 1675 0.79
9 1 275 3 (contained in one power bay) 700 2375 1.12
10 2 450 5 (contained in two power bays) 700 4400 2.08
11 2 450 6 (contained in two power bays) 700 5100 2.41
12 2 450 8 (contained in three power bays) 700 6500 3.07
Frame Size Control Bay (CB) CFM Per CB Fan Number of Modules CFM Per Module Total CFM Total CMS
Fans (Motor Side Inverter Only)
8 1 275 1 (contained in one power bay) 700 975 0.46
9 1 275 2 (contained in one power bay) 700 1675 0.79
10 1 275 3 (contained in one power bay) 700 2375 1.12
11 1 275 4 (contained in two power bays) 700 3075 1.45
12 1 275 5 (contained in two power bays) 700 3775 1.78
Enclosure Options
IMPORTANT IP21, UL Type 1 PowerFlex 750-Series drives must be installed in a clean, dry location. Contaminants such as oils, corrosive vapors and abrasive debris must
be kept out of the enclosure. These enclosures are intended for indoor use primarily to provide a degree of protection against contact with enclosed
equipment. These enclosures offer no protection against airborne contaminants. See the following tables for an explanation of enclosure options and the
environmental specifications that are found on page 6. See Industry Installation Guidelines for Pulse Width Modulated (PWM) AC Drives,
publication DRIVES-AT003 for additional information.
Approximate Dimensions
Frame 8 AC Precharge Module (Cat. No. 20-750-MACP-xx-F8M)
Dimensions are shown in millimeters and (inches).
307 342
(12.1) (13.5)
1133
(44.6)
507 344
(20.0) (13.5)
98
(3.9)
1350
(53.2)
371
(14.6)
Rear View
226
(8.9)
210.9
(8.30)
27.6 124.5 125.5
(1.09) (4.90) (4.94)
166
(6.54)
180
(7.09)
4x
5.8(0.23)
1500
(59.1)
703
(27.7)
400
(15.75)
Dimensions are shown in millimeters and (inches).
1500
(59.1)
386
(15.2)
501
(19.7)
51
(2.0)
225
(8.9)
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
AC Drives Common Bus Application Techniques, publication 750-AT004 Provides basic information to properly wire and ground common bus PWM AC drives.
PowerFlex 750-Series Products with TotalFORCE™ Control Installation Instructions, publication Provides the basic steps to install PowerFlex 755TL drives, PowerFlex 755TR drives, and
750-IN100 PowerFlex 755TM bus supplies.
PowerFlex 755TM IP00 Open Type Kits Installation Instructions, publication 750-IN101 Provides instructions to install IP00 Open Type kits in user-supplied enclosures.
PowerFlex 755TM AC Precharge Modules Unpacking and Lifting Instructions, publication 750-IN102 These publications provide detailed information on:
• Component weights
PowerFlex 755TM DC Precharge Modules Unpacking and Lifting Instructions, publication 750-IN103 • Precautions and recommendations
• Hardware attachment points
PowerFlex 755TM Power and Filter Modules Unpacking and Lifting Instructions, publication 750-IN104 • Lifting the component out of the packaging
PowerFlex 750-Series Service Cart Instructions, publication 750-IN105 Provides detailed set-up and operating instructions for the module service cart and lift
extension option.
PowerFlex 755TM Power and Filter Module Storage Hardware Instructions, publication 750-IN106 Provides detailed installation and usage instructions for this hardware accessory.
PowerFlex 755TM IP00 EMC C2 Filter Unpacking and Lifting Instructions, publication 750-IN109 Provides unpacking and lifting instructions for the IP00 / Open Type EMC C2 filter.
PowerFlex Drives with TotalFORCE Control Programming Manual, publication 750-PM100 Provides detailed information on:
• I/O, control, and feedback options
• Parameters and programming
• Faults, alarms, and troubleshooting
PowerFlex 750-Series Products with TotalFORCE Control Technical Data, publication 750-TD100 Provides detailed information on:
• Drive and bus supply specifications
• Option specifications
• Fuse and circuit breaker ratings
PowerFlex 750-Series Products with TotalFORCE Control Hardware Service Manual, publication Provides detailed information on:
750-TG100 • Preventive maintenance
• Component testing
• Hardware replacement procedures
PowerFlex 750-Series Safe Speed Monitor Option Module Safety Reference Manual, publication These publications provide detailed information on installation, set-up, and operation of the
750-RM001 750-Series safety option modules.
PowerFlex 750-Series Safe Torque Off Option Module User Manual, publication 750-UM002
PowerFlex 750-Series ATEX Option Module User Manual, publication 750-UM003
Wiring and Grounding Guidelines for Pulse Width Modulated (PWM) AC Drives, publication Provides basic information to properly wire and ground PWM AC drives.
DRIVES-IN001
Industry Installation Guidelines for Pulse Width Modulated (PWM) AC Drives, publication DRIVES-AT003 Provides basic information for different enclosure systems and environmental/location
considerations (to help protect against environmental contaminants), and power and
grounding considerations needed to properly install a Pulse Width Modulated (PWM) AC drive.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.rockwellautomation.com/global/certification/ Provides declarations of conformity, certificates, and other certification details.
overview.page
Product Compatibility and Download Center Get help determining how products interact, check
features and capabilities, and find associated www.rockwellautomation.com/global/support/pcdc.page
(PCDC) firmware.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, LISTEN. THINK. SOLVE., PowerFlex, Rockwell Automation, Rockwell Software, and TotalFORCE are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400