Professional Documents
Culture Documents
ICP-OES Avio 220 Max ICP-OES Specifications
ICP-OES Avio 220 Max ICP-OES Specifications
The Avio® 220 Max is a compact, plug-and-play, hybrid simultaneous ICP-OES instrument, ideal for labs with low-to-high
throughput requirements. It utilizes a vertical plasma and is engineered to handle even the most difficult, low-to-high
concentration samples without dilution, delivering productivity, performance and faster return on investment. Plus,
Syngistix™ software provides an intuitive and smart environment with real-time instrument diagnostics and results viewing
to easily track sample analysis, quality control, and internal standard performance to guarantee sample accuracy.
Spectrometer Specifications
Double Monochromator: The Avio 220 Max ICP-OES uses a Dynamic Wavelength Stabilization – Plug and Play: The
unique double-monochromator optical system. This design Avio 220 Max is the only ICP system able to go from cold
results in a high-speed, high-light-throughput optical system start to sample analysis in 10 minutes – plug and play.
offering excellent resolution, all in a compact system. The The secret behind this feature is the wavelength reference
sealed optical system can be purged with nitrogen for low UV section of the detector which monitors a small portion of the
(165-190 nm) performance. The spectral range is 165-900 nm neon spectrum in order to create a dynamic wavelength scale
with resolution of < 0.009 nm @ 200 nm. used to actively correct avelength positions. The resultant
wavelength accuracy and reproducibility allows direct
Echelle Spectrometer: The high-dispersion echelle
‘on-peak’ measurements rather than time-consuming peak-
spectrometer has a focal length of 0.3 meter and a stigmatic
search methods used in sequential ICP systems. This
Littrow configuration. The echelle grating used for dispersion
unprecedented cold startup time provides the analyst much
has 79 lines/mm with a blaze angle of 63.8 degrees.
needed flexibility in their laboratory.
Vertical Dual View Plasma: The system incorporates a vertically
Attenuation Mode: The Avio 220 Max ICP-OES incorporates
oriented plasma with complete dual-viewing optics under computer
attenuation mode, a unique mode to selectively reduce analyte
and software control. Any wavelength can be used in the radial,
signal, allowing higher concentrations to be measured. This
axial or mixed viewing modes in a single method. With the dual
extends the dynamic range of ICP-OES without affecting the
view capabilities of the Avio 220 Max, viewing of the plasma is
ability to measure analytes present at lower concentrations.
accomplished by computer control of a mirror located in the optical
Attenuation mode involves moving an attenuation screen into
path, allowing selection of axial or radial view and adjustment of
the light path before the light enters the spectrometer, which
the plasma viewing in both the vertical and horizontal planes.
can reduce the signal by ≈ 90%. Because the Avio 220 Max
Detector: The UV-sensitive, dual backside-illuminated is a unique hybrid simultaneous instrument, it can attenuate
charge-coupled device (CCD) array detector is cooled directly the signal for a specified analyte while not affecting others,
using a single-stage integrated Peltier cooler operated at thereby providing effortless dilution, allowing both high and
approximately -8 °C. The detector has two photosensitive low concentration analytes to be measured in the same
segments containing 176 by 128 pixels. One section is used method and with the same sample preparation.
for analytical measurements, and the other is a wavelength
reference section. The CCD-array detector collects both the
analyte and the nearby background information in a single
spectrum, allowing for simultaneous background correction
and providing improved precision and analytical speed.
ICP System Specifications Sample Introduction System
RF Generator: The Avio 220 Max ICP-OES features a fourth- Torch/Torch Mount: A unique, demountable torch design
generation 40-MHz, free-running solid-state RF generator, using one-piece quartz tubing for plasma and auxiliary gas flow
adjustable from 1000 to 1500 watts, in 1 watt increments. The is supplied. The standard torch includes a 2.0-mm i.d. alumina
power efficiency is greater than 79% with < 0.1% variation in injector for full corrosion resistance to all acids, including
output power stability. True power control maintains the hydrofluoric and aqua regia. A variety of other injectors are
plasma power at the set point, even when changing sample available. The externally mounted spray chamber is integrated
matrices. The compact RF supply meets all FCC certification into an easily removed sample-introduction cassette. The sample-
requirements for RF emission (Part 18 of FCC rules and introduction cassette can be adjusted (with the plasma on) for
regulations) and complies with EC and Class A requirements. maximum performance in different matrices. No tools are
required for torch or sample-introduction cassette removal.
Its unique Flat Plate™ plasma technology generates and
maintains a robust, matrix-tolerant plasma with approximately Spray Chambers: Instruments can be ordered with a Ryton®
half the argon consumption of helical load-coil systems. HF-resistant Scott-type or a glass cyclonic spray chamber.
A variety of other spray chambers are available.
Plasma Ignition and Extinction: Plasma ignition is computer-
controlled and totally automated. The plasma can be ignited Nebulizers: The Avio 220 Max can be ordered with a cross-flow
automatically at a user-determined time and turned off or glass concentric nebulizer. The cross-flow design with
automatically after an analysis. GemTips™ is corrosion-resistant (sapphire/ruby tips in a PEEK
body). The system can routinely handle 50% (v/v) solutions of
Safety Interlocks: For user safety and system protection, the
HCl, HNO3, H2SO4, H3PO4, 20% (v/v) HF, and 30% (w/v) NaOH.
system constantly monitors water flow, shear gas pressure,
Additional nebulizers are available.
argon pressures, sample-compartment door closure and plasma
stability, and displays the interlock status on the computer Peristaltic Pump: The integrated four-channel, computer-
screen as graphic symbols. If an interlock is interrupted, the controlled pump has variable speeds from 0.2 to 7 mL/min in
plasma will immediately and safely shut down. 0.1 mL/min increments, using 0.76 mm (0.030 in.) i.d. tubing.
Syngistix software was designed with the user in mind, offering
Cooling Water: A water-recirculating cooling system is
many smart features to make your analysis easier and more
required, with approximately 4 L/min flow capacity at 310
accurate. Some of these features specific to the peristaltic pump
to 550 kPa and a temperature between 15 °C and 25 °C.
are FastPump™ and SmartRinse™, which dramatically improve the
sample rinse-out and analysis times, and Tubing Saver, which
Gas Flow Controls
increases the longevity of the tubing by slowly cycling the pump
Argon Flow: Computer-controlled solenoid valves are used to back and forth when the system is turned on but not in use.
regulate the flow automatically within the range of 8-20 L/min
in 1 L/min increments for plasma argon and 0 to 2.0 L/min in Spares Kit: A spares kit of common replacement items
0.1 L/min increments for auxiliary argon. A mass-flow controller is included.
is supplied with all systems for the nebulizer argon flow and is
variable between 0 and 2.0 L/min in 0.01 L/min increments. Physical Data – Instrument
Power: One 200-230 VAC, 20A line, 2800 VA, single phase,
PlasmaShear™: A compressed-air shear gas (18-25 L/min)
50/60 Hz (± 1%)
is used to remove the plasma tail from the optical path,
minimizing interferences and extending the dynamic range. Dimensions: 65 x 81 x 76 cm (W x H x D), 100 kg
PlasmaShear provides a maintenance-free and lower-cost Environmental: The instrument will operate with a laboratory
approach to removing the cooler plasma zone. temperature between 15 and 35 °C (59-95 °F). For optimum
instrument performance, the room temperature should be
controlled at 20 ± 2 °C.
PerkinElmer, Inc.
940 Winter Street
Waltham, MA 02451 USA
P: (800) 762-4000 or
(+1) 203-925-4602
www.perkinelmer.com
Copyright ©2020, PerkinElmer, Inc. All rights reserved. PerkinElmer® is a registered trademark of PerkinElmer, Inc. All other trademarks are the property of their respective owners.
136067 PKI