Yatwin IP Camera Manual

Cloud ip camera web client user manual
826 USER MANUAL

IP Camera
(HD Cloud IP Camera)
User Manual for WEB Client
Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

MODEL: 826
Note: To protect your privacy, please change the initial password after login.
Please keep your user name and password safely.
826 USER MANUAL
Contents
1.Introduction ......................................................................................... ........................... .... 1

2.Installation ........................................................................................... ............................... 1
2.1. Camera installation and login .............................................................................1
2.2. Wireless Installation guide ..................................................................................3
3.Home page ..........................................................................................................................4
3.1. Camera guide.........................................................................................................4
.........
3.2 Camera status ........................................................................................................6
3.3 Account settings ....................................................................................................7
3.4 Image setting & PTZ control ...............................................................................8
3.5 Mode selection .................................................................................................... 12

3.6 Interface button..................................................................................................9

3.7 Playback..............................................................................................................9
4.Information ........................................................................................................................15
4.1 Alarm information review ................................................................................... 15
5. Settings............................................................................................................................. 16
5.1 About ...................................................................................................................... 16
5.2 Nickname .............................................................................................................. 12
5.3 Admin password .................................................................................................. 18
5.4 Guest password ................................................................................................... 19
5.5 Network .................................................................................................................. 20
5.6 OSD ........................................................................................................................ 23
5.7 Micro SD card ....................................................................................................... 18
5.8 Camera alarm settings ....................................................................................... 19
5.9 Scedule recording ............................................................................................... 20
5.10 Date/Time ........................................................................................................... 21
5.11 System ................................................................................................................. 21
5.12 Other .................................................................................................................... 22
6. Problem solutions........................................................................................................... 23
7. Wireless basis ................................................................................................................. 26
8. Wireless security ............................................................................................................ 29

826 USER MANUA
1. Introduction
Thanks for buying our products. Cloud IP camera has a variety of functions,
which dedicates to the office and home solutions. Unlike traditional IP Camera,
cloud camera uses P2P technology, plug and play (no need to do port forwarding,
DNS, or IP address setting). By using WIFI remote monitoring ， Cloud
Camera realizes real-time control at any where and any time. 720P HD makes
image clear and smooth. Cloud IP camera also has motion detection function,
making it cost-effective for home and public places security.
This manual is only for reference, any update please open www.mipcm.com
to download newest manual version.
2. Installation
2.1. Camera installation and Login

Step 1: Connect power and network
Please refer to "Quick Installation Guide” for installation
Step two: Login
1: Open www.mipcm.com on browser, and put in camera ID and password (each
IPCAM have a unique ID number and password).

826 USER MANUA

Note: To protect your privacy, please change the initial password after first time
login.
Language
Registeratio
Download n
Enter the ID number

or registered account
Password Login
Note: The user can click on the login screen of the "Register" button to register a
user account, login to add / manage multiple cameras.
2: On the video viewing screen.
ID login page

826 USER MANUA
Account
settings
Registered account
login page
Live view
shoot
Play
Real-time viedo
Image playback shortcuts
3: Install the plug-in:
Install video plug
Note: If the image blurs when you watch, probably run the focal during
transportations or human factors of the camera lens, the focal length of the lens
caused by out of focus, the user can put the camera on the 3 meters for

826 USER MANUA

reference, swing the camera lens back and forth a few times till the image in best
performance.
2.2. Wireless Installation Considerations

Wireless Camera promises you in the wireless network coverage area to use
wireless connection to access the network. However, the wireless signals need
to pass through walls, ceilings and other objects, thickness and location of limits
Wi-Fi range. The network ranges depending on your room or office types of
materials and radio frequency noise. Please follow these basic guidelines to
maximize wireless range:
1. Make sure the walls, ceilings between routers and your IP Cameras have
as fewer as you can, - each wall or ceiling can weaken adapter 3-90 feet (1-
30 meters) of the wireless transmission range.
2. Please pay attention to the straight-line distance between the devices. 1.5
feet thick (0.5 meters) of the wall at a 45degree appears to be almost 3 feet
(1 meter) thick. When turning to the 2degree, the thickness of the wall will
reach 42 feet (14 meters). Put the machine straight through a wall or ceiling
(instead of at an angle) for better reception.
3. Building Materials make a difference. Metal door or aluminum studs may
weaken the wireless signal. The access points, wireless routers and other

networking devices where the signal passes through drywall or not open
doorways. Materials and objects such as glass, steel, metal, band insulator,
water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade
your wireless signal.
4. Keep your product away from the electronic devices that generate RF noise
and appliances at least 3-6 feet or 1-2 meters from the outside position.
5. If you are using 2.4GHz cordless phones or other radio transmitting source
devices (such as microwave ovens), your wireless connection may degrade
dramatically or drop completely. Make sure your 2.4GHz phone base is as far
away from wireless devices. Even if the phone is not in use, the base will still
transmit signals.
3. Homepage
3.1 Add Camera Wizard

After registered users login, the user can add, delete and manage multiple cloud
cameras.
826 USER MANUA
2. Add Camera ID
1. Add online
cameras

826 USER MANUA
3. Enter Cloud IP
Cam password and
click add device.
4. Enter Cloud IP
Cam password and
click revise button.

826 USER MANUA
5. After choosing Wi-Fi,

enter the password and
click apply.
6. Add IP Cam
Successfully.
Attention: 1. the 4th step is based on the Cam’s initial password, if the initial
password is not “admin”, this step can be cancelled.

826 USER MANUA

2. The 5th step, after choosing Wi-Fi and enter password, when applying,
please check the STATE1 ( ) light flashing status. Before pulling the cable
please make sure the STATE1 ( ) flash 3 times for every 3 seconds.
3.2 Camera status

1. You can see the online status of every camera you added, which can be
divided into 3 statuses.
• Green color indicates that your camera is online.
• Yellow color means the camera online; however,
password has been changed. You need to
enter the new password to access the camera.
• Red indicates the camera is offline and not able to
access remotely.
If the camera is offline, please try the following methods:
• Make sure the camera's network connection is normal.
• Try to restart your network router.
• Please check the camera's cable connections to ensure they are connected.
• Make sure the camera STATE2 ( ) the green light flashes every 3 times
every 3 seconds.

If you still can not access your camera, please restart the camera or press the
RESET shortly backing to the factory settings.
826 USER MANUA

2. : Add or delete online cameras.
3. : Show or hide the status bar.
3.3 Account settings
1. Set video size: User can choose the resolution of the images.
2. Password: User can modify the admin account (The visitors login the account
by administrator password can modify the information of the account).
3. Guest Password: The visitors who login the account by guest password can
only watch and rotating screen, which can't modify the information of the
account.
4. Exit: Exit Video Interface.
10

826 USER MANUA
3.4 Image settings and PTZ control
1. Brightness / Contrast / Saturation / Sharpness: video images can adjust the
parameters of the corresponding
(Such as the right to adjust these parameters will result in poor image quality
display we may not recommend users adjust of these parameters).
2. : Click "Reset", you can restore brightness / contrast / saturation / sharpness
back to the factory settings.
3. : IP CAM can control PTZ up / down / left / right rotation.
4. : Display and hide the status bar icons.
5. Machine Turnover: When the machine is hosting, the picture is turnover, when
choosing Machine Turnover, the picture will turn back.
11

6. Supply frequency: Please choose the right Supply frequency based on the
local area. (China rated frequency is 50Hz).
826 USER MANUA

3.5 Mode selections
1. Automatically: Infrared lamp’s on and off is based on the environment around

the photosensitive sensor.
2. Daytime: IP camera is switch into daytime mode, infrared lamp is off.
3. Night: IP camera is switch into night mode, infrared lamp is on.
3.6 Button page
1. Video Play / Stop: Click buttons to play or stop the video.
2. Temporary manual recording button (the file recorded to micro SD card):
Click the buttons on the audio / video recording, recording icon indicates
12

.NOTE: This video button function applies only to temporary manually
recording.
826 USER MANUA

3. Snapshot button: Click the button for playing video capture pictures.
4. Voice intercom: Click buttons, camera and computer microphone /
speakers are turned on; the two sides’ voices can be heard.
3.7. Playback
Micro SD card stores the video files.
1. Camera
list
2. Video
files and
catalog
Play/Stop
1. Select the camera in the camera list.
2. In the image on the right can find more information. Video files and file details.
13

826 USER MANUA
14

826 USER MANUA
4. Information
4.1 Alarm Information Checking
1. Information
checking
15

2. Open the
image
3. Save as
826 USER MANUA
5. Management
This section shows the configuration of the IP Cam.
5.1 About
Basic information about the camera is displayed.
16

Model: The camera version number.
Software Version: Camera current software version number.
Plug-in version: watch current video cameras plug-in version number.
Device ID: camera ID.
826 USER MANUA

5.2 Nickname
Modify the current camera name.
17

Nickname: User can modify the name of the camera.
5.3 Admin Password
826 USER MANUA

Admin Password: Enter the current login password (default password is admin).
New Password: Enter the new admin password.
18

(To protect your privacy, please change the initial password after logging. Please
keep the user name and password.)
New Password confirmation: Re-enter the current camera modified login
password.
Click "Apply" to save your changes.
5.4 Guest Password
Admin Password: Enter the administrator password of the current camera.
Guest Password: Enter guest password (Default password is admin).
New Password Confirmation: Re-enter the new guest password again.
Click "Apply" to save your changes.
19

826 USER MANUA
5.5 Network
NIC: Ethernet (wired) or wireless networks.
1. Ethernet:
Effective when connected to a wired network.
Start Status: The current Ethernet situation is
enable or disable.
Mac Address: The current Ethernet Mac address.
Automatically obtain an IP address (cameras
default): When selected, the camera
Automatically get to the router connected to it is
automatically assigned to
20

Its associated IP address / gateway / subnet mask information.
826 USER MANUA

Obtain DNS Service Address automatically: After clicking, IP Cam will
automatically obtain DNS by router.
By using DNS server address underneath: After clicking, the camera
will manually access with DNS connected to the Cam (user may not need to set
it).
2. Wireless Network: (wireless network configuration)
Select the wireless network card
after.
Wireless Mode: Hot / Terminal Choose

WI-FI
A.Hot spots: As a searching
device, the default mode is
wireless hot spot. By using PC
or iPhone can search the hot
spot, IP cam hot spot is realize
as ID number. For example:
ipc1jfiegaaaah2a.
By connected with hot spot can realize the WIFI P2P connections.
21

A. Terminal: As an searched devices, can realize network
Camera connected with WIFI router.
826 USER MANUA

Note:
After setting up WIFI
click Applications,, WIFI
Surface does not Choose

Client
immediately refresh the
page information, the
user wants to quit
"Network", and then enter, you can see no

Choose
Line connection router
status display: After a
successful connection,
IP
Address and gateway
information will get to.
Meanwhile
STATE1 flashes
22

green 3 times every 3 seconds.
826 USER MANUA

5.6 OSD
Menu settings
23

826 USER MANUA

Display text: After tickled, the upper left corner of the screen will display the
name of the camera. The user can modify the display name of the camera (Can
not have Chinese or symbols, only English and numbers).
Display date: After tickled, upper left corner of the screen will display the date.
Date format: The user can select Year / Month / Day or Month / Day / Year two
date formats.
Display time: After tickled, the screen will display the time.
Time format: User selectable for 24-hour or 12-hour format clock.
24

Display week: After tickled, the screen will display weeks.
Click “Apply” to save your changes.
5.7 SD card:
Display Camera SD card status.
826 USER MANUA
Format: The Micro SD (T-FLASH) card is formatted; the existing micro SD card
contents will be cleared.
25

Repair: If "Playback" cannot see video file or view the alarm information, can
repair the micro SD card. (Note: The repair function may cause part of the micro
SD card contents lost)
Uninstall: put micro SD card from the camera release
Click Apply to save your changes.
826 USER MANUA

5.8 Camera alarm arming settings:
Adjust the
sensitivity
Apply
I / O Alarm input: When normally open, alarm input port connect with an external
alarm sensor (such as door sensor, infrared, smoke alarm detector, etc.) must be
a normally open alarm probes. When alarm occurs, the probe switch is closed;
network cameras generate alarm triggers, alarm calls according to user settings.
26

I / O Alarm output: When normally open, alarm output port corresponding
external alarm devices (such as alarm loudspeakers, sound and light alarm
equipment, etc.) must be a normally open type, when an event has occurred, the
user sets the Alarm I / O port output , camera alarm output switch is closed,
trigger external alarm devices.
Sensitivity: To set the sensitivity of motion detection, the greater the value the
higher the sensitivity, relatively the probability of false alarms generated will be
higher, generally we recommend user to choose the default values, the user also
can set up sensitivity based on their will.
Choose motion
I/O on/off
Take photo
Pre - recorded
time
Apply
Alarm on
27

5.9 Scheduled recording:
826 USER MANUA

In this option you can choose the 7* 24 hour video or scheduled recording.
Note: video files will be stored in SD card, when content is full, it will overridden.
28

5.10 Date / Time:
Time Server address: Users can manually enter in the online search to fill the
local country time zone server address (default time server address is China
time).
Sync data & time automatically: When Opening, the cam will automatically
synchronize the time displayed on the address bar time server address with
corresponding time.
Time zone: Users can choose the time zone of the camera.
826 USER MANUA

Date: When “time server automatically" turned off, users can manually modify the
cam’s date.
29

Time: When "time server automatically" turned off, users can manually modify
the camera’s time.
Click “Apply” to save your changes.
5.11 System:
Online Upgrade: If you have the latest software, there will be tips <Update> click
update, the camera will be online software upgrade, after the upgrade is
successful will re-start the Camera.
826 USER MANUA
30

Restore the factory settings: The user
can click the "Restore" button, will pop up
on the right
Diagram tips. When the "Save network
device" checked, the point is determined,
in addition to
Network setup parameters retained, the other parameters are restored to the
factory settings back;
When the "Save Network Device" is not checked, the point is determined, all
camera parameters
Few are restored to factory settings back, equivalent to click the RESET button.
Reboot: Click the reset button after the restart of the camera.
31

826 USER MANUA

5.12 Other:
Audio:
Speaker: Set the size of the camera's speaker sound, use the mouse to drag the
slider to set, the greater the value, the greater the sound from the speaker.
Mac: Sets the camera microphone sensitivity, drag the slider with the mouse
settings, the greater the value, the more sensitive the microphone receiving
sound external environment more, the computer listens to the voice of the larger
end, the corresponding listening to ambient noise is greater.
Flip: To turn upside down.
Power Frequency: 50Hz and 60Hz with two frequencies selected the user
machine installation area under power frequency to choose.
Click Apply to save your changes.
32

826 USER MANUA
6. Troubleshooting
This chapter provides solutions for questions or problems in camera installation
and operation.
If you encounter problems, please follow solutions below. (Below we take
Windows ® Vista ™ and XP as example. Different operation systems have the
similar operation.)
1). what is Remote Access? How to do that?
Remote access means that you can access a camera from a web on any PC
trough internet. So even if you are not at home, you can access a camera, view
live video and manage its settings.
How to do that? Please follow the Quick Installation Manual in the packing box.
If your camera does not work, please check whether the following things are
right.
....STATE2 ( ) on the camera flashes green 3 times every 3 seconds
....Internet connection is working properly
... The router's LAN & WAN connection are working properly.
... Router UPNP and DHCP are on
... Routers can get a public IP.
33

... Router has been upgraded to the latest firmware version
826 USER MANUA

... Restore your camera to factory settings by press “RESET” key one time on
camera bottom
... Disconnect router power supply and connect it again to restart
Try again to make your camera work after the above checking.
2). Why is network connection unstable?
Network cable may get a problem. You can PING the address of a existing
device in the same network. If network cable connects right and network connect
right, you should get a reply like bytes = 32 time = 2 ms.
Another possibility is that the network equipments like hubs and switches may
have problems. Ensure all network equipments connect and work well.
3). Why does the APP show camera not online?
This may be caused by firewall protection (such as MAC addresses filtering,
MAC address binding with the IP address). In this situation, please contact your
system administrator to check firewall. Firewall may need some configuration
changes. For more information, please refer to camera installation.
Ensure STATE1 ( ) or STATE2 ( ) flashes 3 times every 3 seconds.
Router default settings may have a problem. Ensure router DHCP server is on.
34

If there are multi-level routers, each should connect the other trough WAN (for
example, the 1rs router LAN connects the 2nd router LAN by a network cable). If
problem still exists, connect your camera with power, and then press “RESET”
key on the bottom to restore to factory settings.
4). Why are there vertical white lines in image?
CMOS sensor being exposed to strong light (such as direct exposure to sunlight
or halogen light) may cause this problem. CMOS sensor is behind the lens. It is
to measure the optical signal and converts it to a digital format, then the
computer will convert digital format to images to users. If the CMOS sensor has
been in high night for a long time remember not to move it to dark places for it
may damage the sensor.
5). Blur image. What to do?
When camera works in dark places, its image may get blur.
Or, your camera does not focus properly. Rotate the lens till you see a clear
image.
Web viewing on a computer may get a blur image. Because a computer has
much larger screen than a phone, and same resolution image will be amplified.
6). Image quality is poor, how to improve it?
Open www.mipcm.com and login. Find image quality configuration to adjust the
parameters to improve image quality (e.g.: brightness, contrast, color saturation).
35

7). When I view on a web, there is no image. Why?
If you are using Internet Explorer, please make sure ActiveX is on. You may
need to modify the browser's security settings to allow ActiveX plug-in installed.
If you are using Internet Explorer versions earlier than 7.0, you need to upgrade
your Web browser.
8). Troubleshooting, LED status indication:
Indicator LED Status Description Troubleshooting

status
POWER Power supply is If light is not lit, check the power
Red light
(power normal supply is damaged or the camera
Normally on
indicator) hardware failure, requiring repair.
Wifi was disabled by 1. Press RESET for 5 seconds to
the user or wifi restore the factory settings.
hardware failure 2.Make camera with wired Ethernet
connection, after landing, in the
(OFF
"Manage" -> "Network" ,make WIFI
enabled;
3. Camera hardware failure, requiring
STATE1/STA1
repair.
( )
WIFI router is trying 1. Verify WIFI router is good;
to connect 2. Try the camera placed from
somewhere near WIFI router and
Red light
then reconnect the power.
Normally on
3. Restart WIFI routers and cameras;
4. Camera hardware failure, requiring
repair.
36

Is connected to the 1. Please make sure your router's

Red router, is trying to DHCP server is enabled.
Flashing 2 obtain an IP address 2. Try to restart the router.
times through DHCP 3. Manually assign a WIFI router to
the same gateway IP address.
Ip address has been 1. Confirm the router is good.
obtained or the user 2. Camera hardware failure, requiring
Red light
to configure a static ip repair.
flashing 3
address, is trying to
times
communicate with the
gateway
And gateway 1. User can check whether the
communication is network can access the Internet.
normal, is trying to 2. Check whether there are two
communicate with the routers connected (first level router
internet network cable will need to receive a
Green
second-class router's WAN port on
light
the job).
Normally on
3. Try the camera placed from
somewhere near WIFI router and
then reconnect the power.
4. Check the router is turned on the
firewall to do MAC address filtering.
Internet traffic is 1. Restart the machine or the
normal, is trying to machine on again to restart.
communicate with the 2. Try running the camera, based
Green
cloud server on the press camera base
flashing 2
times RESET button hole 6 seconds,
set the camera to restore the
factory tune.
Green Normal Normal
light communication with
flashing 3 the cloud server, you
times can access the
37

camera via cloud

services
Wi-Fi for adhoc mode References Cloud Camera Quick
(Wi-Fi did not Installation Guide
configure the router /
router connection
failed / DHCP fails to
Red \
enter this mode), you
green
can Wi-Fi terminal
lights
(mobile phone / pad /
flashing
notebook computers)
alternately
connected to the
wireless network, and
then access the
camera through
192.168.188.254.
Ethernet is disabled 1. Users press RESET 5 seconds to
by the user or the restore the factory settings.
network cable is not 2. Check \ replace the camera and
(OFF connected or connect the network cable between
Ethernet card the routers.
hardware failure 3. Camera hardware failure, requiring
repair.
Network cable is 1. Please make sure your routers
connected, the IP DHCP server is enabled.
STATE2/STA2
address is obtained 2. Try to restart the router.
( ) Red light
3. Manually assign a letter to the
Ethernet IP address of the router the
same gateway.
IP address has been 1. Confirm whether the router is good.
obtained or the user 2. Camera hardware failure, requiring
Flashing to configure a static repair.
red IP address, is trying
to communicate with
the gateway
38

And gateway 1. The user to check whether the

communication is network can access the Internet.
normal, is trying to 2. Check whether there are two
communicate with the routers connected (first level router
Green
internet network cable will need to receive a
light
second-class router's WAN port on
the job).
3. Check the router is turned on the
firewall to do MAC address filtering.
Internet traffic is 1. Restart the machine or the
normal, is trying to machine on again to restart.
communicate with the 2. Try running the machine,
Green
cloud server based on the press machine
flashing 2
times base RESET button hole 6
seconds, set the machine to
restore the factory tune.
Normal Normal
Green communication with
light the cloud server, you
flashing 3 can access the
times camera via cloud
services
DHCP fails, use a References << >> Cloud Camera
temporary IP address Quick Installation Guide.
192.168.187.254,
Red \ Users can access the
green same computer and
lights webcam LAN, set
flashing different segments IP
alternately (192.168.187.xxx),
and then access the
camera through
192.168.187.254
39

7. Wireless Infrastructure
IP CAMERA wireless products are based on industry standards for your home,
business or public access wireless networks to provide easy and compatible
high-speed wireless connection. IP CAMERA strictly follows the IEEE standard.
Wireless LAN (WLAN) is network that transmits and receives data trough
wireless signal not electrical wiring. WLAN is increasingly used in home, office,
airport, coffee shop, and other public places. WLAN needs no electrical wiring or
other base equipments. It helps people to work and communicate easier and
more efficient with its mobility.
Tips:
When you use a wireless network, please note the following:
Put your router or access point at center area
Put the router / access point at the highest point of the room, so the signal
can be distributed to whole room space. If you have a two-story house, you
need to install a repeater to extend signal coverage.
Eliminate interference
40

Make sure home appliances such as cordless telephones, microwaves, and
televisions are far from the router / access point, which helps reduce
interface.
Safety
Prevent your next door neighbors or others connecting to your wireless network.
Open WPA or WEP in the router to protect your wireless network. Please refer to
the product manual for more information on this feature.
8. Wireless Security
This section introduces different levels of security to protect your data from
invasion.
IPCAM provides the following security types:
• WPA-PSK (pre-shared key)
• WEP (Wired Equivalent Privacy)
What is WEP?
41

WEP is Wired Equivalent Privacy. It is based on the IEEE 802.11 standard
and uses the RC4 encryption algorithm. WEP provides security by data
encryption on your wireless network, so that to ensure secure transitions from
one wireless device to the other.
To access a WEP network, you must know the key. Key is a code string. When
using WEP, you must specify the level of encryption. Type of encryption
determines the key length.128-bit encryption requires a longer key than 64-bit
encryption. Key id defined by HEX (16 hex -0-9, AF) or ASCII (American
Standard Code for Information Interchange - alphanumeric characters) format.
ASCII format allows you to enter a string that is easy to remember. ASCII is
converted into HEX when used on the internet. Four keys can be defined for
easy changing if needed.
What is WPA?
WPA or Wi-Fi Protected Access is a Wi-Fi standard, designed to improve WEP
(Wired Equivalent Privacy) security features.
There are two major improvements over WEP:
It improved data encryption through the Temporal Key Integrity
Protocol (TKIP). TKIP messes the keys using a hash algorithm, and
ensures that the keys are not changed by adding integrity-checking
42

feature. Based on 802.11i, WPA2 replaces TKIP with Advanced
Encryption Standard (AES) instead of TKIP.
User authentication through EAP gets missed in WEP.WEP is easily to be
sniffed or stolen for it accesses wireless network trough computer MAC
address. EAP is built on a more secure public key encryption system to
ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a pass phrase or key to authenticate your wireless
connection. Key is an alpha-numeric password between 8 and 63 characters
long. Password can include symbols and spaces. This key must be the same
with your wireless router key or access point key.
After camera installation as the Quick Installation guides, you can use the
assigned IP address of the camera. Because you share the same network with
one or more computers trough a router, the assigned IP address is a local
address. Then you can view your camera in local network.
43

FCC Statement：
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
and(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The
The distance between
distance between user
user andand products
products should
should be no be
lessno less
than than 20cm
20cm

Yatwin IP Camera Manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Yatwin IP Camera Manual

Uploaded by

Copyright:

Available Formats

Cloud ip camera web client user manual

826 USER MANUAL

(HD Cloud IP Camera)

User Manual for WEB Client

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUAL

1.Introduction ......................................................................................... ........................... .... 1

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

3.6 Interface button..................................................................................................9

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

DNS, or IP address setting). By using WIFI remote monitoring ， Cloud

making it cost-effective for home and public places security.

to download newest manual version.

2.1. Camera installation and Login

Please refer to "Quick Installation Guide” for installation

Step two: Login

1: Open www.mipcm.com on browser, and put in camera ID and password (each

IPCAM have a unique ID number and password).

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

Enter the ID number

user account, login to add / manage multiple cameras.

2: On the video viewing screen.

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

3: Install the plug-in:

Install video plug

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

2.2. Wireless Installation Considerations

maximize wireless range:

30 meters) of the wireless transmission range.

(instead of at an angle) for better reception.

3. Building Materials make a difference. Metal door or aluminum studs may

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

your wireless signal.

devices (such as microwave ovens), your wireless connection may degrade

3.1 Add Camera Wizard

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

5. After choosing Wi-Fi,

password is not “admin”, this step can be cancelled.

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

826 USER MANUA

3.2 Camera status

divided into 3 statuses.

• Green color indicates that your camera is online.

• Yellow color means the camera online; however,

password has been changed. You need to

enter the new password to access the camera.

• Red indicates the camera is offline and not able to

If the camera is offline, please try the following methods:

• Make sure the camera's network connection is normal.

• Try to restart your network router.

Print to PDF without this message by purchasing novaPDF (http://www.novapdf.com/)

RESET shortly backing to the factory settings.

826 USER MANUA