SABIC Resins and Compounds For Water Management Applications
SABIC Resins and Compounds For Water Management Applications
WATER MANAGEMENT
APPLICATIONS
CERTIFIED SOLUTIONS WITH A RANGE OF PERFORMANCE CAPABILITIES
MAY 2019
Classification: Internal Use
THERMOCOMP™ OF008A
NORYL™ FE1520PW
LUBRICOMP™ CX94108
LUBRICOMP™ OFL36A
NORYL™ FE1630PW
1
Classification: Internal Use
LUBRICOMP™ &
Water & gas PP, Nylon, PC, PPO, PPS, NORYL GTX830 in water
THERMOCOMP™,
meters POM, PPO/PP, PPO/PA meter housings
NORYL™ GTX & PPX
Boiler NORYL™ PPX and NORYL PPX630 for heat
PPO/PP, PPO/PA
Components NORYL™ GTX exchanger housings
www.sabic.com
2
Classification: Internal Use
CONTACT US
Middle East and Africa Europe
SABIC Global Headquarters Plasticslaan 1
PO Box 5101 PO Box 117
Riyadh 11422 4600 AC
Saudi Arabia Bergen op Zoom
T +966 (0) 1 225 8000 The Netherlands
F +966 (0) 1 225 9000 T +31 (0) 164 292911
E: [email protected] F +31 (0) 164 292940
DISCLAIMER: THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS
SUBSIDIARIES OR AFFILIATES (“SELLER”) ARE SOLD SUBJECT TO SELLER’S STANDARD CONDITIONS OF SALE, WHICH ARE
AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD
FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY
RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE
EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER’S MATERIALS, PRODUCTS, SERVICES
OR RECOMMENDATIONS. UNLESS OTHERWISE PROVIDED IN SELLER’S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT
BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS, SERVICES OR
RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT. Each user is responsible for making its own determination as to the
suitability of Seller’s materials, products, services or recommendations for the user’s particular use through appropriate end-
use and other testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision
of Seller’s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by
Seller. Statements by Seller concerning a possible use of any material, product, service or design do not, are not intended to,
and should not be construed to grant any license under any patent or other intellectual property right of Seller or as a
recommendation for the use of any material, product, service or design in a manner that infringes any patent or other
intellectual property right.
SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates.
© 2019 Saudi Basic Industries Corporation (SABIC). All Rights Reserved.
Any brands, products or services of other companies referenced in this document are the trademarks, service marks and/or
trade names of their respective holders.