FSP 150 Ge110 Pro Series
FSP 150 Ge110 Pro Series
Product Overview
Technical Information
Access Capacity • Key distribution based on IEEE 802.1X
• Two 1 ports: • Diffie-Hellmann key exchange process
– one dedicated 100/1000BaseX (SFP) port • Tamper resistant and evident enclosure
– one 10/100/1000BaseT or 100/1000BaseX (SFP) port • Full interoperability with all FSP 150 ConnectGuard™-enabled products
• Two 2/ Four 3-7 10/100/1000BaseT or 100/1000BaseX (SFP) ports Low-Touch Provisioning
Network Interface • DHCP / BOOTP auto-configuration
• Two 1 100/1000BaseX (SFP) ports • IEEE 802.1x port authentication (supplicant and authenticator)
• Two 2-7 10/100/1000BaseT or 100/1000BaseX (SFP) ports • Text-based configuration files
• One network port can be defined as an additional access port • TFTP / SCP for software image upgrade and configuration file copy
Network Interface Redundancy Management and Security
• IEEE 802.3ad Link Aggregation – active/standby or load balancing
• ITU-T G.8032 Ethernet Ring Protection Local Management
• Serial connector (RJ45) using CLI
Synchronization 6,7 • Local LAN port (RJ45) using CLI, SNMP and Web GUI interfaces
• ITU-T G.8261 / G.8262 / G.8264 Synchronous Ethernet on all interfaces • 3G / LTE / WiFi USB interface
• Sync Status Message support
• IEEE 1588v2 Precision Time Protocol Remote Management
• ITU-T G.8265.1 and G.8275.1 PTP Telecom Profile • Maintains in-band VLAN and MAC-based management tunnels
• BITS-in and BITS-out • Fully interoperable with FSP 150CM, FSP 150EG-X and other
• BITS Sync Status Messaging FSP 150 products
• 1 PPS in/out
• 10 MHz Management Protocols
• IPv4 and IPv6 DCN protocol stacks, including dual-stack operation
VLAN Support and 6-over-4 tunnels
• 4096 VLANs (IEEE 802.1Q customer-tagged) and stacked VLANs • Telnet, SSH (v1/v2), HTTP/HTTPS, SNMP (v1/v2c/v3)
(Q-in-Q service provider tagged) • NETCONF / YANG, OpenFlow
• 2-tag management (push / pop / swap) for c-tag and s-tag
• IEEE 802.1ad Provider Bridging (c-tag, s-tag) Secure Administration
• Ethertype translation • Configuration database backup and restore
• 32 1,2 / 64 3-7 Ethernet Virtual Circuits (EVC) • System software download via FTP, HTTPS, SFTP or SCP
• 9612 Byte per frame MTU transparency (dual flash banks)
• EoMPLS encapsulation • Remote authentication via RADIUS / TACACS
• SNMPv3 with authentication and encryption
Layer 2 Traffic Management • IPsec on management traffic
• Acceptable client frame policy: tagged or untagged • Access Control List (ACL)
• Service classification based on IEEE 802.1p, 802.1Q and IP-TOS/DSCP
• VLAN tag priority mapping (IEEE 802.1ad PCP encoding) IP Routing
• MEF-compliant policing (CIR / CBS / EIR / EBS) with three-color marking • DHCP, RIPv2 and static routes, ARP cache access control
and eight classes of service
• Port shaping on transmit for both client and network ports System Logging
• MEF 10.3 Hierarchical Policing • Alarm log, audit log and security log
• DiffServ supporting WFQ/SP mix Regulatory and Standards Compliance
Layer 3 Traffic Management • MEF CE 2.0 certified
• L2-L4 Access Control Lists (ACL) for classification • IEEE 802.1Q (VLAN), 802.1p (Priority), 802.1ag (CFM),
• VRF-lite virtual routing and forwarding 802.3ah (EFM), 802.1x
• DHCP Relay Agent • ITU-T Y.1731, G.8010/Y.1306, G.8011.1+2, G.8032
• MEF-6.1, -9, -10.2, -11, -14, -20, -21, -22.1, -23.1, -25, -26.1,
Operation, Administration and Maintenance (OAM) -30, -33, -35, -36
• IEEE 802.3ah EFM-OAM Link Management • IETF RFC 2544 (Frame Tests), RFC 2863 (IF-MIB), RFC 2865
• IEEE 802.1ag Connectivity Fault Management (CFM) with hardware (RADIUS), RFC 2819 (RMON), RFC 5357 (TWAMP)
assistance • MEF-compliant ITU-T Y.1564 Service Activation Testing
• ITU-T Y.1731 Performance Monitoring • ANSI C84.1-1989
• ITU-T Y.1564 Service Activation Testing • ETSI 300 132-2, BTNR2511, ETS 300-019, ETS 300-019-2-[1,2,3],
• Terminal and facility loopbacks on port- and EVC-level for all interfaces ETS 300-753
• Cable diagnostics with benchmarks (electrical interfaces only) • NEBS Level 3 certified
• Embedded RFC 2544 test generator and analyzer (ECPA) • Telcordia GR-499, GR-63-CORE, SR-332
• MEF-compliant Layer 2 Control Protocol Disposition and extensive • Safety IEC / UL / EN 60950, 21CFR1040.10, EN 60825, EN 50371,
filter options for Layer 2 packet types EN 300-386, EN 50160, IEC 60320/C14
• Link Loss Forwarding to signal local link and network path failures • EMI EN 300-386, GR-1089-CORE, ETS 300-132, FCC Part 15, Class A,
• Dying gasp message for power failure alarming Industry Canada
(EFM-OAM and SNMP trap option)
• Port mirroring (local and remote) Environmental
• Dimensions: 137mm x 34mm x 152mm / 5.4” x 1.3” x 6.0” 1;
Performance Monitoring 1U compact chassis, 220mm x 44mm x 212mm / 8.7” x 1.75” x
• RFC 2819 RMON Etherstats on a per-port and per-service basis 8.4” 2-4; 439mm x 44mm x 212mm / 17.3” x 1.75” x 8.4”
• 15-minute and 1-day performance data bins (W x H x D) 5-7, ETSI-compliant
• IEEE 802.3ah / ITU-T G.8021 PHY level monitoring • Operating temperature: -40 to +65°C (hardened environment)
• ITU-T Y.1731 single- and dual-ended Frame Loss Measurement • Storage temperature: -40 to +70°C (GR-63-CORE)
• Synthetic Frame Loss and Delay Measurement for multi-point • Humidity: 5 to 95%, B1 (non-condensing)
service monitoring • Integrated PSU 2-4 / Redundant Modular PSU 5-7:
• TWAMP sender / reflectors for L3 based service assurance 110/240 VAC, -48 to -72VDC or +24 to +30VDC with over-voltage
• Multi-CoS monitoring on EVCs scaling up to 64 1 / 128 2-6 simultaneous and over-current protection / External 110/240 VAC, -48 to -72VDC
SOAM flows power adapter 1
• Threshold-setting and threshold-crossing alerts • Maximum power consumption: 20 Watts
• Physical parameter monitoring for SFP optics, including TCAs • Dry alarm contacts 5
• Temperature monitoring and thermal alarms
ConnectGuard™ Security
• L2 MACsec encryption at line rate on a per-EVC basis
• End-to-end encryption mode with one or two VLAN tags transmitted
in the clear
• Robust AES encryption algorithm