Professional Documents
Culture Documents
Ch#2: Chemical Combination
Ch#2: Chemical Combination
OBSERVATION
He observed that weight remains same.
AgNO3(aq) + HCl(aq) AgCl(s) + HNO3(aq)
RESULT
Thus total mass of the substance before the reaction is equal to the total mass of the substances
after the reaction.
EINSTEIN THEORY ABOUT THE RELATIONSHIP BETWEEN MASS AND ENERGY
EINSTEIN THEORY
The relationship between mass and energy was first proposed by Albert Einstein in 1906. The
relationship between mass that is lost and the energy that is released in chemical reaction is given
by the equation.
E= mC2
Where
E is the energy in ergs
M is the mass in gram
C is the velocity of light in centimeter/second (3x108 cm/sec)
If follows that for every chemical change there will be a negligible mass change which cannot be
detected by weighting technique i-e. There is no detectable gain or loss of mass in a chemical
reaction.
LAW OF CONSTANT COMPOSITION
Louis Proust in 1799 proposed the Law of constant proportion.
STATEMENT:
It states that different samples of same compounds always contain the same elements combined
together in same proportions by mass.
OR
When different elements combine to give a pure compound, the ratio between the masses of
these elements will always remain the same.
EXPLANATION
Proust proved experimentally that a compound obtained from different sources will always
contain the same elements combined together in a fixed proportion. If different samples of pure
water from different sources like river, ocean, well, tube well and rain are analyzed, we will
always find the ratio between the masses of hydrogen and oxygen to be 1:8.
EXAMPLE
Every sample of pure water, though prepared in the laboratory or obtained from rain,
river or water pump contains one part hydrogen (H) and 8 th part oxygen (O) by mass.
e.g H2O
2:16
Berzelius heated 10g of lead (Pb) with various amount of sulphur (S). he got exactly
11.56g of lead sulphide and the excess of sulphur was left over, when he used 18g of lead
(Pb) with 1.56g of sulphur(S), he got exactly 11.56g of lead sulphide (PbS) and 8g of
lead (Pb) remained used.
By fixing the mass of nitrogen (N), the mass of oxygen (O) in different oxides varies i.e.
8:16:24:32:40
Or 1:2:3:4:5
These figures (in multiple ratio), are according to the law of multiple proportions.
LAW OF RECIPROCAL PROPORTION
STATEMENT
When two different elements A and B combine separately with the fixed mass of the third
element E, the proportion in which these combine with E will be either in the same ratio or some
simple multiple of it.
EXAMPLE
Ratio Of C and O In CO2
When two elements C and O separately combine with H to form methane (CH 4) and
water (H2O) respectively.
i. In CH4 ratio between carbon and hydrogen is 12:4 = 3:1
ii. In H2O ratio between hydrogen and Oxygen is 16:2 = 1:8
When C and O combine with each other to form CO2, they do so in the same
proportion i.e. 12:32 = 3:8 parts by mass.
CH4 H H2O
12:4 1g 2:16
3:1 1:8
3g 8g
CO2
12:32
3:8
Ratio Of C and S In CS2
When two elements C and S separately combine with O to form carbon dioxide (CO 2)
and sulphurdioxide (SO2) respectively.
either in the same ratio 3:8 or some multiple of it i.e. 12:64 = 3:16 which is simple
multiple of 3:8.
CO2 O SO2
12:32 1g 32:32
3:8 8:8
12g 32g
CS2
12:64
3:16
ATOMIC MASS
DEFINITION
The sum of number of protons and neutrons in an atom is called atomic mass.
ATOMIC MASS UNIT
One atomic mass unit is defined as a mass exactly equal to one twelfth the mass of C-12 atom.
EXAMPLE
Naturally occurring carbon is composed of 98.889% C-12 and 1.111% C-13. Thus
average atomic mass of C-atom becomes 12.011a.m.u.
The atomic mass of sodium atom is 23a.m.u. It means that one atom of sodium is 23
times heavier than a hydrogen atom. Similarly the atomic mass of Oxygen is 16a.m.u.
and that of sulphur is 32a.m.u .
ATOM
Definition
The smallest particle of an element which can or cannot exist in Free State and can enter into a
chemical reaction is called atom
MOLECULE
Definition
The smallest particle of a compound which can exist independently and show all the properties
of the substance is called molecule.
RADICAL
Definition
A radical is a group of atoms usually charged which can keepitself intact and behaves like a unit
in a chemical reaction.
Example:
Hydroxide ion OH¯, ammonia ion NH4+ compound containing more than one radicals are
(NH4)2SO4 and Ca(OH)2.
VALENCY
The combining power of an element with other elements is called valency.
VARIABLE VALENCY
Same elements show more than one valency which is termed as variable valency.
Example:
Oxygen shows valency of 2, but in H3O+ ion it shows its valency 3.
CHEMICAL FORMULA
Definition
Chemical formula is a formula which is used to represent an element or a compound in terms of
symbols. A chemical formula also represents the number and type of atoms of elements present
in the smallest unit of that substance.
Example:
The chemical formula of hydrogen sulphide is H2S and it shows the number and type of different
atoms present in its molecule. The chemical formula of hydrogen, nitrogen, oxygen and ozone
are H2, N2, and O3 respectively.
SYMBOL
Symbol represents an element or an atom of an element in short form by letters.
Example:
Symbol for Hydrogen is H
Symbol for calcium is Ca
FORMULA
A formula is a combination of symbols for atoms or ions, that are held together chemically in a
compound. Formula also indicates the ratios in which the atoms are combined.
Example
Formula for water is H2O
Formula for carbon dioxide is CO2
EMPIRICAL FORMULA
Definition
The formula which shows the simplest ratio of atoms of different elements present in a compound
is called empirical formula.
Example:
Benzene
Empirical formula of benzene (C6H6) is CH
Glucose:
Empirical Formula of glucose (C6H12O6) is CH2O
Hydrogen Peroxide:
Empirical formula of hydrogen peroxide is (H2O2) is HO
Water:
Empirical formula of water is (H2O) is H2O.
Compounds Having Same Empirical Formula
Acetylene (C2H2) and Benzene (C6H6) have same empirical formula CH
Acetic acid (CH3COOH) and Glucose (C6H12O6) have same empirical formula CH2O.
MOLECULAR FORMULA
Molecular formula of an element or a compound represents the actual number and type of atoms
present in molecule. It can either be same as empirical formula or some multiple of it.
Example:
Carbon dioxide:
Molecular formula of carbon dioxide is CO2. It represents the true composition of compound.
Glucose:
Molecular formula of glucose is C6H12O6 that is equal to (CH2O)6 or six times to empirical
formula (CH2).
Water:
Molecular Formula of water is H2O
DETERMINATION OF MOLECULAR FORMULA:
Molecular formula of a compound may be calculated by multiplying a whole number (n) with
the empirical formula of that compound.
Molecular Formula (M.F) = (E.F) n
Where
n= M.F.weight
E.F.weight
MOLECULAR FORMULA MASS
Definition
Molecular formula mass is the sum of the atomic masses of all the atoms present in molecular
formula of a substance.
Example:
Molecular Formula Mass of CO2:
The atomic mass of C is 12a.m.u and that of O is 16a.m.u
C = 12 X 1 = 12a.m.u
O = 16 X 2 = 32a.m.u
Molecular formula Mass of CO2 = 12+32 = 44a.m.u
Molecular formula Mass of Ozone (O3)
The atomic mass of O is 16a.m.u.
O = 16 X 3
Molecular formula Mass of O3 = 48a.m.u.
AVOGADRO’S NUMBER
Definition
The number of atoms or molecules present in one mole of a substance is constant and is equal to
6.023X 1023 particles. This number is called Avogadro’s number and represented by NA.
Example
Consider the following reaction
C + O CO
12g 16g 28g
(1mole) (1mole) (1mole)
23
1 mole of C = 12g = 6.023X10 atoms of carbon
1 mole of Mg = 24g = 6.023X1023 atoms of magnesium
1 mole of H2O = 18g = 6.023X1023 molecules of water
1 mole of CO2 = 44g = 6.023X1023 molecules of CO2
1 mole of CaCO3 = 100g = 6.023X1023 molecules of CaCO3
1 mole of NaCl = 58.5g = 6.023X1023 molecules of NaCl
+
1 mole of Na = 23g = 6.023X1023 ions of Na+
1 mole of Cl¯ = 44g = 6.023X1023 ions of Cl¯
DECOMPOSITION REACTION
The reaction in which a chemical substance decomposes into two or simpler substances upon
heating is called decomposition reaction.
General Equation:
AB A+B
Example:
Commercial preparation of carbon dioxide involves the decomposition of lime stone at
high temperature
high temp
CaCO3 CO2(g) + CaO(s)
Laboratory preparation of oxygen gas involves the decomposition of potassium chlorate
on heating.
high temp
2KClO3(g) 2KCl (g) + 3O2
Metal nitrate like Zn(NO3)2 decomposes on heating.
heat
2Zn(NO3)2 (s) 2ZnO (s) + 4NO2 (g) + O2 (g)
ADDITION REACTION
When two or more substances react together to form a single substance, the reaction is called an
addition reaction.
General Equation:
A+B AB
Examples:
Reaction between metal and nonmetal
2Mg(s) + O2 (g) 2MgO
2Na (s) + Cl2 (g) 2NaCl (s)
Reaction between two nonmetals
H2 (s) + Cl2 (g) 2HCl(g)
Reaction between two compounds
CaO(s) + CO2 (g) CaCO3 (g)
SINGLE DISPLACEMENT REACTION
The reaction in which an atom or group of atoms is replaced by another atom or group of atoms
is called displacement reaction.
General Equation:
A+BC AC+B
Example:
When a mixture of iron fillings and copper oxide is turned red on heating. The pink
colored copper metal is formed on cooling.
Fe (s) + CuO(s) Cu (s) + FeO(s)
Magnesium is more reactive than copper, so it displaces copper.
Mg + CuSO4 Cu (s) + MgSO4
Some metals react with acids, bases or even water to displace hydrogen gas.
2Na(s) + 2H2O (l) 2NaOH (aq) + H2 (g)
Zn (s) + 2HCl ZnCl2 + H2 (g)
Nonmetals can displace a nonmetal.
Cl2 (g) + 2KBr(aq) 2KCl (aq) + Br2(aq)
COMBUSTION REACTION
A reaction in which substances react with either free oxygen or oxygen of the air, with rapid
release of heat and flame, is called combustion reaction.
When methane (CH4) gas burns in air it forms carbon dioxide (CO2), water (H2O) and
heat.
CH4 + 2O2 CO2 + 2H2O +ΔH(heat)
When carbon (C) burns in air it produces carbon dioxide (CO 2), and heat
C+ O2 CO2 +ΔH (heat)
CHEMICAL EQUATION
Definition:
Chemical equation is a short hand method of expressing the chemical reaction, in terms of
symbols and formulae of the substances involved in a chemical reaction.
OR
The representation of a chemical change in terms of symbols and formula is called chemical
equation.
COMPONENTS OF CHEMICAL EQUATION
Reactant:
The starting substances which react with each other to form a new substance are called
reactants.
Products:
Substances formed by chemical reaction are called products.
Arrow:
The reactant and products are separated from each other by using the single arrow (→) or
double headed ( ), depending upon the kind of reaction.
Example:
When two molecules of hydrogen (H2) combine with one molecule of oxygen (O2) to give two
molecule of water (H2O), instead of writing the full name of substance, chemist represented this
chemical reaction in the form of the following equation.
2H2 + O2 2H2O
Co-Efficient:
The number in front of formula in a chemical equation is called co-efficient.
They show the number of molecules that react with each other. Where no co-efficient appears,
only one number is considered.
Expression:
The expression (g), (l) and (s) placed sometimes as subscript after the formulae of the reactants
and products, indicating the state, gaseous, liquid and solid of reactant and product.
C(s) + O2(g) CO2(g)
CONDITIONS OF REACTION
Sometimes reaction conditions are written over the arrow.
Example:
When reactants are heated, a capital Greek letter delta (Δ) may be placed over the arrow
Δ
CaCO3 (s) + CaO(s) CO2
If catalyst is used, this catalyst is shown over the arrow.
pt
2SO2 (g) + O2 (g) 2SO3 (g)
If the reactants are heated in the presence of catalyst, both the symbols are placed on the
arrow.
Δ
2KClO3 (s) 2KCl3 (s) + 3O2 (g)
Catalyst
STEPS
Writing The Correct Formulae:
Write the correct formulae of all the reactants on the left side and all the products on the right
side.
Balancing The Number Of Atoms:
Balance the number of atoms on each side.
Multiplying By Co-efficient:
Balance the equation by inspection method for this multiply the formula by co-efficient so as to
make the number of atoms same on both sides of the equation.
Writing Diatomic Molecules As It Is:
Write the diatomic molecules e.g. H2, O2, N2 and Cl2 as such in chemical equation.
Rechecking Of Balnced Equation:
Finally recheck the balanced equation to be sure that the number and kind of atoms are the same
on both sides of equations.
MOLE RATIO BASED ON BALANCED CHEMICAL EQUATION:
We know that the reactants needed by chemical reaction cannot be determined by counting
molecules directly and counting is always be done by weighing while co-efficient in a chemical
equation represents the number of moles (molecules) and not masses of molecules.
STEPS CALCULATING THE AMOUNT OF REACTANTS OR PRODUCTS:
Following steps will help in calculating the amount of reactant and products.
I. Balancing The Equation:
Balance the chemical equation for the given reaction.
II. Finding Mole Ratio:
Use the co-efficient in the balanced equation to get the mole ratio.
III. Calculating Number Of Moles:
Use the mole ratio to calculate the number of moles of required reactants or products.
IV. Converting The Moles Into Mass:
Convert the mole of reactants or products into mass, if required by the problem.
DIFFERENTIATIONS
ATOM MOLECULE
Atom is the smallest particle of an element. A molecule contains two or more atoms held
together by strong forces of attraction.
Atoms have incomplete outer most shell except Molecules have complete outer most shell.
in Noble gases.
Atom may or may not exist independently. Molecules can exist independently.
SYMBOL FORMULA
Symbol represents the element in short form. A formula is a combination of symbols of
atoms or ions, that are held together chemically
in a compound.
Symbol represents an atom of an element. Formula represents a molecule.
EMPIRICAL FORMULA MOLECULAR FORMULA
The formula that gives only the relative A formula is that which indicates the actual
number of each type of atoms present in a number and type of atoms in a molecule. It can
molecule is called empirical formula. either be same as empirical formula or some
simple multiple of it.
Empirical formula is derived by the chemical Molecular formula is derived by the following
analysis equation
M.F= n (E.F)
MOLECULAR MASS FORMULA MASS
Molecular mass of substance is the sum of the Formula mass of a substance is the sum of the
atomic masses of all atoms present in the atomic masses of all atoms in a formula unit of
molecular formula of a substance or molecule. the substance.
MOLE MASS
It is defined as the molecular mass, atomic The molar mass of a substance is its relative
mass, formula mass of a substance expressed molecular mass expressed in grams. It has a
in grams or the quantity of the substance fixed unit.
containing 6.022X1023 particles is called a
mole