Professional Documents
Culture Documents
بروفايل الراجحى
بروفايل الراجحى
HISTEELI
NDUSTRI
ES
COMP
ANYPROFI
LE
(
PRE-
QUALI
FICATI
ONSDOCUMENTS)
Introduction
______________________________
Rajhi Steel
About Rajhi Steel:
Rajhi Steel ranks among the top steel manufacturers in the region and the
leading manufacturer of steel rebar, commercial and rolls.
Founded in 1984, Rajhi Steel is headquartered in Riyadh - Saudi Arabia. Rajhi
Steel was established when the Founder, late Sheikh Mohammed bin Abdu
laziz Al-Rajhi decided to construct this industrial landmark in Saudi Arabia.
The first rebar production lines started operation in 1996, in Riyadh.
The Rolling lines went into stream in 2006. The first expansion of the Steel
Billets plant was launched in Jeddah in 2007 and. With the growing de
mand for steel products amid industrial and a comprehensive urban boom
witnessed by the Kingdom years ago, Rajhi Steel was embarked in the con
struction of a new rolling plant in Jeddah, which began operation in the third
quarter of 2012, which added 1 million tons of steel supplies to the markets.
Rajhi Steel production capacity now stands at more than 3 million tons to
become trustworthy of industry and construction generations' confidence in
the Middle East and North Africe.
Since the start of business, Rajhi Steel strategies - Ensure opening recruitment for Saudis in alljobs
areas as much as possible and provide on-the
focused on a group of beliefs, values and trends. job training and development of skills to provide
Perhaps, some of the most important pillars of these support to work teams and maintain excellence.
strategies are as follows:
- Keep in line with the latest developments in steel
- Strengthen Corporate Brand. industry and its applications.
- Customer satisfaction. - Keep abreast of developments in steel market
and industry in the region to maintain our leader
- Strive to expand our customer base and access to new
ship position.
markets.
- Adapt to changing conditions and rapidly
- Continue to assume leadership, expansion and product
transform to keep pace with changes in the
development.
internal and external work environment to ensure
- Choose the right time and place for expansion while continuity of work to achieve the desired goals in
maintaining our values, standards and quality of our the highest possible level of productivity and ef.
products, our customers and our leadership in the steel ficiency, through valuing and rewarding creativity
industry markets and strengthening our position and and initiative.
the capabilities of our employees.
We will achieve our vision through our human resources by promoting the spirit of teamwork, nurturing
talent, enhancing leadership capacity, and working with pride and due diligence and speed and passion
for entrepreneurship and innovation. We aspire to become the preferred supplier of choice in the industry
to provide excellent products and services and create added value for our customers. Also, we are keen to
provide a safe working environment taking into account the requirements of environmental protection and
conservation. We care for our communities and we apply the highest values and ethical standards in paral-
lel with the development of leading innovative solutions in technology and operations and products.
To achieve satisfaction of our partners; "customers, employees, suppliers, investors," and contribute to soci-
ety development according to strategies, methodologies and robust systems.
~
Quality:
sourcing of premium quality and high effi- Rajhi Steel endeavors to get the best
ciency products with the aim to conform- quality certificates, leading to recognized
ing to the highest international standards. international standards. To this end, the
company has made several quality certifi-
Rajhi Steel recognizes the significance cations. Including:
of its products in making the business of - ISO 9001 :2008 certification.
its customers a success and achieving
the ultimate consumer satisfaction by - Conformity to the Saudi Arabia Standards
maintaining highest quality standards. & Specifications Certificate.
The company is committed to quality and -TUVNORDBSOHSAS 18001:2007Cer-
international standards. It has provided tificate.
qualified crew of engineers, chemists and
- The Company was awarded several cer-
outstanding technicians. The Company is
tificates of competence and quality of its
characterized by the provision ofthe cut- products from Saudi scientific and govern-
ting--€dge quality testing and assurance mental bodies.
laboratories and calibration and meas-
urement technologies to ensure highest
- In-Plant Tests include:
international standards are met, including - Raw Material Inspection to ensure compli-
samples measuring and testing devic- ance with international standards.
es. Quality assurance is carried out by
- In-process Inspection.
identifying points of samples Periodically
examination and testing conformity to the - Finished products final inspection.
required standards and specifications.
ﺍﺳﺘﺜﻤﺎﺭ ﻭﻃﻨﻲ
ﻃﻦ ٩٠٠٠٠٠.٠ / ٢٤١٠١٩ﺻﻨﺎﻋﺔ ﻣﻨﺘﺠﺎﺕ ﺃﻭﻟﻴﺔ ﻣﻦ ﺍﻟﺤﺪﻳﺪ ﺃﺧﺮﻯ ﻛﺘﻞ ﺣﺪﻳﺪﻳﺔ "ﺑﻴﻠﻴﺖ" ٧٢٠٧١١٠٠
ﺍﺳﺘﺜﻤﺎﺭ ﻭﻃﻨﻲ
+٩٦٦٥٠١٣٦٦٠٢٨ ﻫﺎﺗﻒ ﻣﺼﻨﻊ ﺍﻟﻌﺎﺻﻤﺔ ﻷﺳﻴﺎﺥ ﺣﺪﻳﺪ ﺍﻟﺘﺴﻠﻴﺢ ﺍﺳﻢ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ
٧٠١٢٣٥٥١٩٩ ﺍﻟﺮﻗﻢ ﺍﻟﻮﻃﻨﻲ ﺍﻟﻤﻮﺣﺪ ٤٠٣٠١٥٩٥٥٤ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻟﻠﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ
)(N21.29061393957816 ,E39.181151390075684 ﻣﻮﻗﻊ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ ﺷﺮﻛﻪ ﺍﻟﺮﺍﺟﺤﻲ ﻟﻠﺼﻨﺎﻋﺎﺕ ﺍﻟﺤﺪﻳﺪﻳﻪ ﺷﺮﻛﺔﺷﺨﺺ ﻭﺍﺣﺪ ﻣﺎﻟﻚ ﺍﻟﻤﻨﺸﺄﺓ
ﻣﻨﻄﻘﺔ ﻣﻜﺔ ﺍﻟﻤﻜﺮﻣﺔ ﺍﻟﻤﻨﻄﻘﺔ ١٠١٠١٦٧٢٣٣ ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺍﻟﺮﺋﻴﺴﻲ
ﺟﺪﺓ ﺍﻟﻤﺪﻳﻨﺔ ﺻﻨﻊ ﺍﻟﺤﺪﻳﺪ ﺍﻟﻘﺎﻋﺪﻱ ﻭﺍﻟﺼﻠﺐ ٢٤١٠ / ﺍﻟﻨﺸﺎﻁ ﺍﻟﺮﺋﻴﺴﻲ
ﻃﻦ ٦٨٥٠.٠ / ٢٤١٠٤٠ﺻﻨﺎﻋﺔ ﺻﻔﺎﺋﺢ ﻭﺃﻟﻮﺍﺡ ﻭﻟﻔﺎﺋﻒ ﺷﺮﻳﻄﻴﺔ ﻭﻗﻀﺒﺎﻥ ﻭﺃﺳـﻴﺎﺥ ﻭﺯﻭﺍﻳﺎ ﻭﺃﺳﻼﻙ ﻭﻣﻘﺎﻃﻊ ﻗﻄﻊ ﻭﺛﻨﻲ ﻭﺗﺸﻜﻴﻞ ﺍﺳﻴﺎﺥ ﺣﺪﻳﺪ ٧٢١٧٢٠٠٠
ﺑﻜﺎﻓﺔ ﺃﺷﻜﺎﻟﻬﺎ ﺍﻟﺘﺴﻠﻴﺢ
ﻃﻦ ٦٥٠٠٠٠.٠ / ٢٤١٠٩٠ﺃﻧﺸﻄﺔ ﺃﺧﺮﻯ ﻟﺼﻨﺎﻋﺔ ﺍﻟﺤﺪﻳﺪ ﻭﺍﻟﺼﻠﺐ ﻗﻀﺒﺎﻥ ﺣﺪﻳﺪ ﺗﺴﻠﻴﺢ ٧٢١٣١٠٠٠
ﻃﻦ ٢١٨٤.٠ / ٢٤١٠٤٠ﺻﻨﺎﻋﺔ ﺻﻔﺎﺋﺢ ﻭﺃﻟﻮﺍﺡ ﻭﻟﻔﺎﺋﻒ ﺷﺮﻳﻄﻴﺔ ﻭﻗﻀﺒﺎﻥ ﻭﺃﺳـﻴﺎﺥ ﻭﺯﻭﺍﻳﺎ ﻭﺃﺳﻼﻙ ﻭﻣﻘﺎﻃﻊ ﻟﻔﺎﺕ ﻭﻗﻀﺒﺎﻥ ﺣﺪﻳﺪ ﺗﺴﻠﻴﺢ ٧٢١٣٢٠٠٠
ﺑﻜﺎﻓﺔ ﺃﺷﻜﺎﻟﻬﺎ
ΔϠϔϘϣΔϣϫΎγϣϪϳΩϳΩΣϟΕΎϋΎϧλϠϟϲΣΟέϟϪϛέη
˰ϫ˺˾˻́˹˾˺˼ ˰ϫ˺˽˻̂˹˾˺˼ Δϧγ̂̂ ϯΩϭό˰˰˰˰γ
ΩϬϓϙϠϣϟϖϳέρΔϳΟΫϭϣϧϟϲΣνΎϳέϟ
˻́˻˾̀˹˹ ˺˺˾˺˺ ˽˹̀˹̀
ΏϠλϟϭΩϳΩΣϟϙΑγˬΏϠλϟϭΩϳΩΣϟϥϣΔϓϭΟϣϟϝΎϛηϷϭέϳγϭϣϟϭΏϳΑΎϧϷΔϋΎϧλˬΔϠϓέΩϟϭϖΛΑϟϭΏΣγϟΔργϭΑˬΦϟΏϠλϟϥϣϭΩϳΩΣϟϥϣΕΎΟΗϧϣΔϋΎϧλ
ϊϧλϟΔϣΎΗ ΕΎΟΗϧϣ
ϱΩϭόγ்˿̀˾˹˹˹˹˹˹ ϱΩϭόγ்˿̀˾˹˹˹˹˹˹
ϱΩϭόγ்˺˹ ˿̀˾˹˹˹˹˹
ΓέΩ·αϠΟϣϭοϋϩέΎΑϣΩϣΣϣௌΩΑϋϖϓϭϣ ΓέΩϻαϠΟϣαϳέϲΣΟέϟίϳίόϟΩΑϋΩϣΣϣέΩΑ
αϠΟϣαϳέΏΎϧΏΩΗϧϣϭοϋϲΣΟέϟίϳίόϟΩΑϋϥΑΩϣΣϣϥΑΩϳίϳ ϯΫϳϔϧΗέϳΩϣϙέΎΑϣΦϳηϟϝϲϠϋϥϣΣέϟΩΑϋέΩΎϘϟΩΑϋ
ΓέΩ·αϠΟϣϭοϋϲΣΟέϟΩϣΣϣϟΎλΩϣΣϣ ΓέΩ·αϠΟϣϭοϋϲΣΟέϟΩϣΣϣϰϳΣϳΩϣΣϣ
ΓέΩ·αϠΟϣϭοϋίϳϭϘϟௌΩΑϋϥϣΣέϟΩΑϋΩϳί ΓέΩ·αϠΟϣϭοϋϲϧΎρΣϘϟϱΩϬϣϥΑέλΎϧϥΑϯΩϬϣ
ΓέΩ·αϠΟϣϭοϋέϔλΑௌΩΑϋϥΑϡϟΎγϥΑௌΩΑϋ
νΎϳέϟ νΎϳέϟ
˰ϫ˺˽˽˻˹˽˻̂ ˺˽̂˿˿̂˼˿ ˰ϫ˺˽˽̀˹˼˻˾
ΩΎϣΣϟϡϳϫέΑϥΑϥγΣϣϟΩΑϋ
CamScanner
Ͱ͙௪̡̡͙͛̓ͭͭ̾͡
Membership Certificate
/ / /
%
١٤٤٥/٠٤/١١ ﺍﻟﺘﺎﺭﻳﺦ
٢٦/١٠/٢٠٢٣ ﺍﻟﻤﻮﺍﻓﻖ
ﺭﻣﺰ ﺍﻟﺸﻬﺎﺩﺓ ٥٨٤٨٤١٣٢
ﺷﻬﺎﺩﺓ
ﺍﻟﺴﻌﻮﺩﻳﺔ
١٣٢٩٦٩٥٢ ﺭﻗﻢ ﺍﻹﺷﺘﺮﺍﻙ :
ﻣﺼﺪﺭﻩ : ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ١٠١٠١٦٧٢٣٣ :
ﻛﺘﺎﺑﺔ ﺭﻗﻤﺎ
ﺍﺭﺑﻌﺔ ﻋﺸﺮﻩ ﻣﺸﺘﺮﻛﺎ ١٤ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﺛﻤﺎﻧﻴﺔ ﻭ ﺧﻤﺴﻮﻥ ﻣﺸﺘﺮﻛﺎ ٥٨ ﻋﺪﺩ ﺍﻟﻤﺸﺘﺮﻛﻴﻦ ﻏﻴﺮ ﺍﻟﺴﻌﻮﺩﻳﻴﻦ
ﺍﺛﻨﺎﻥ ﻭ ﺳﺒﻌﻮﻥ ﻣﺸﺘﺮﻛﺎ ٧٢ ﺍﻟﻤﺠﻤﻮﻉ
ﺗﺸﻬﺪ ﺍﻟﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﺬﻛﻮﺭﺓ ﺃﻋﻼﻩ ﻗﺪ ﺃﻭﻓﺖ ﺑﺈﻟﺘﺰﺍﻣﺎﺗﻬﺎ ﺗﺠﺎﻩ ﺍﻟﻤﺆﺳﺴﺔ
ﻭﻓﻖ ﺍﻟﺒﻴﺎﻧﺎﺕ ﺍﻟﻤﻘﺪﻣﺔ ﻣﻨﻬﺎ ﺣﺘﻰ ﺗﺎﺭﻳﺦ ﺇﺻﺪﺍﺭ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ،ﻭﺍﻟﺘﻲ ﺗﻢ ﻣﻨﺤﻬﺎ ﻟﺘﻘﺪﻳﻤﻬﺎ ﻷﻳﺔ ﺟﻬﺔ ﺗﻄﻠﺒﻬﺎ ،ﻭﻫﻲ
ﺻﺎﻟﺤﺔ ﻟﺠﻤﻴﻊ ﺍﻷﻏﺮﺍﺽ ﺍﻟﺘﻲ ﻧﺺ ﻋﻠﻴﻬﺎ ﻧﻈﺎﻡ ﺍﻟﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ ﻓﻲ ﺍﻟﻤﺎﺩﺓ ) (١٩/٦ﻣﻨﻪ.
ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﺳﺎﺭﻳﺔ ﺍﻟﻤﻔﻌﻮﻝ ﺣﺘﻰ ١٤٤٥/٠٥/١٠ﻫـ.
ﻋﻦ ﻃﺮﻳﻖ ﺍﺳﺘﺨﺪﺍﻡ ﺃﻭ ﻳﻠﺰﻡ ﺍﻟﺘﺤﻘﻖ ﻣﻦ ﺻﺤﺔ ﻭﺻﻼﺣﻴﺔ ﺍﻟﺸﻬﺎﺩﺓ ﻋﺒﺮ ﺯﻳﺎﺭﺓ ﺍﻟﺮﺍﺑﻂ
ﺍﻟﺮﻣﺰ ﺍﻟﻤﻌﺮﻑ ﺍﻟﺘﺎﻟﻲ : ﺃﺩﻧﺎﻩ ﻓﻲ ﺍﻟﻤﻮﻗﻊ ﺍﻹﻟﻜﺘﺮﻭﻧﻲ ﻟﻠﻤﺆﺳﺴﺔ ﺍﻟﻌﺎﻣﺔ ﻟﻠﺘﺄﻣﻴﻨﺎﺕ ﺍﻹﺟﺘﻤﺎﻋﻴﺔ
www.gosi.gov.sa/vc
Customer Name/Address : :ϞϴϤόϟϥϮϨϋϭϢγ· Shipping Address : : ϦΤθϟϥϮϨϋ Certificate No: 73151 :έΎΒΘΧϻΓΩΎϬηϢϗέ
Customer No: :ϞϴϤόϟϢϗέ
Sales Order No: :ϊϴΒϟήϣϢϗέ
Customer Order No: :˯ήθϟήϣϢϗέ
Delivery Note No: :ϞϴϤΤΘϟήϣϢϗέ
Date Of Issue: 01-Jan-2024 :έΪλϹΦϳέΎΗ
ΔϋΎοΑϟϑλϭ
Mechanical Properties ΔϳϛϳϧΎϛϳϣϟιΎλΧϟ Chemical Composition(%) ϲΎϳϣϳϛϟΏϳϛέΗϟ
Product Description
ΔΣΎγϣ
ΔϣϭΎϘϣ ϝϭϟΩϣ έΎΑΗΧ· ΩΩϋ
έΗϣϟϥίϭ ωϭοΧϟΔϣϭΎϘϣ ΔΑγϧ ϊρϘϣϟ ϥίϭϟ ΩΩϋ
Ωηϟ ϝϭρϟαΎϳϘϣ ϲϧΛϟ ϥΎΑοϘϟ
αΎϘϣϟ Δϔλϭϣϟ ΔΑλϟϡϗέ ΔϟΎρΗγϷ ϥϭΑέϛ ϥϭϛϳϠϳγ ίϳϧϐϧϣ έϭϔγϓ ΕϳέΑϛ ϥϳΟϭέΗϳϧ ϥρ ΕΎρΑέϟ
Ratio ΔρΑέϝϛϟ
Nominal Yield Cross
Tensile (Rm/Re) Gauge Bend
Size Standard Heat/Cast No. Wt. Strength Elongation Section C Si Mn P S N Weight No.of
Strength Length Test No.of bars
(Kg/m) (N/mm2) % Area (MT) Bundles
(N/mm2) (mm) per bundle
(mm2)
5578
Customer Name/Address : :ϞϴϤόϟϥϮϨϋϭϢγ· Shipping Address : : ϦΤθϟϥϮϨϋ Certificate No: 73151 :έΎΒΘΧϻΓΩΎϬηϢϗέ
Customer No: :ϞϴϤόϟϢϗέ
Sales Order No: :ϊϴΒϟήϣϢϗέ
Customer Order No: :˯ήθϟήϣϢϗέ
Delivery Note No: :ϞϴϤΤΘϟήϣϢϗέ
Date Of Issue: 01-Jan-2024 :έΪλϹΦϳέΎΗ
ΔϋΎοΑϟϑλϭ
Mechanical Properties ΔϳϛϳϧΎϛϳϣϟιΎλΧϟ Chemical Composition(%) ϲΎϳϣϳϛϟΏϳϛέΗϟ
Product Description
ΔΣΎγϣ
ΔϣϭΎϘϣ ϝϭϟΩϣ έΎΑΗΧ· ΩΩϋ
έΗϣϟϥίϭ ωϭοΧϟΔϣϭΎϘϣ ΔΑγϧ ϊρϘϣϟ ϥίϭϟ ΩΩϋ
Ωηϟ ϝϭρϟαΎϳϘϣ ϲϧΛϟ ϥΎΑοϘϟ
αΎϘϣϟ Δϔλϭϣϟ ΔΑλϟϡϗέ ΔϟΎρΗγϷ ϥϭΑέϛ ϥϭϛϳϠϳγ ίϳϧϐϧϣ έϭϔγϓ ΕϳέΑϛ ϥϳΟϭέΗϳϧ ϥρ ΕΎρΑέϟ
Ratio ΔρΑέϝϛϟ
Nominal Yield Cross
Tensile (Rm/Re) Gauge Bend
Size Standard Heat/Cast No. Wt. Strength Elongation Section C Si Mn P S N Weight No.of
Strength Length Test No.of bars
(Kg/m) (N/mm2) % Area (MT) Bundles
(N/mm2) (mm) per bundle
(mm2)
5578
ISO 9001:2015
The management system is applicable to:
Managerial Center of steel products: square shape billets, bars/re-bars,
Coils/D-coils, tubes, pipes, cold and black sheets, normal and insulated
corrugated sheets, and galvanized products of different specifications.
Calin Moldovean
President, Business Assurance
Intertek Certification Limited, 10A Victory Park,
Victory Road, Derby DE24 8ZF, United Kingdom
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may
be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to
whom it must be returned upon request.
Page 1 of 2
APPENDIX TO
CERTIFICATE OF
REGISTRATION
This appendix identifies the locations covered by the management system of:
Production of steel products: Square shape billets, bars/re-bars and Coils/D-coils of different specifications and
grades.
Production of various kind of steel products: Tubes, Pipes, cold and black sheets, normal and insulated corrugated
sheets, and galvanized products of different specifications.
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may
be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to
whom it must be returned upon request.
Page 2 of 2
CERTIFICATE
OF REGISTRATION
ISO 9001:2015
The management system is applicable to:
Managerial Center of steel products: square shape billets, bars/re-bars,
Coils/D-coils, tubes, pipes, cold and black sheets, normal and insulated
corrugated sheets, and galvanized products of different specifications.
Calin Moldovean
President, Business Assurance
Intertek Certification Limited, 10A Victory Park,
Victory Road, Derby DE24 8ZF, United Kingdom
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may
be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to
whom it must be returned upon request.
Page 1 of 2
APPENDIX TO
CERTIFICATE OF
REGISTRATION
This appendix identifies the locations covered by the management system of:
Production of steel products: Square shape billets, bars/re-bars and Coils/D-coils of different specifications and
grades.
Production of various kind of steel products: Tubes, Pipes, cold and black sheets, normal and insulated corrugated
sheets, and galvanized products of different specifications.
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may
be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to
whom it must be returned upon request.
Page 2 of 2
Certificate Number:
0109888– A
This appendix identifies the locations covered by the Initial Certification Date:
management system of: 26 January 2021
Calin Moldovean
President Business Assurance
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This
certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at
[email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon
request.
Certificate Number:
0109888– C
This appendix identifies the locations covered by the Initial Certification Date:
management system of: 26 January 2021
Production of various kind of steel products: Tubes, Pipes, cold and black
sheets, normal and insulated corrugated sheets, and galvanized products
of different specifications.
Calin Moldovean
President Business Assurance
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This
certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at
[email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon
request.
This is to certify that the management system of: Certificate Number:
0109888
ISO 9001:2015
The management system is applicable to:
Managerial Center of steel products: square shape billets, bars/re-bars,
Coils/D-coils, tubes, pipes, cold and black sheets, normal and insulated
corrugated sheets, and galvanized products of different specifications.
Calin Moldovean
President, Business Assurance
This certificate includes 3 appendices for sites legal entities, addresses
Intertek Certification Limited, 10A Victory Park,
and scopes of the multisite organization. Victory Road, Derby DE24 8ZF, United Kingdom
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification
Agreement. This certificate’s validity is subject to the organisation maintaining their system in accordance with Intertek’s requirements for systems certification. Validity
may be confirmed via email at [email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek,
to whom it must be returned upon request.
Certificate Number:
0109888– B
This appendix identifies the locations covered by the Initial Certification Date:
management system of: 26 January 2021
Calin Moldovean
President Business Assurance
In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This
certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at
[email protected] or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon
request.
CERTIFICATE
OF APPROVAL
Product Conformity Certification - ASTM A615/A615M, Page
A706/A706M 1 of 2
This is to certify that
Al Rajhi Steel Industries Co. Ltd. Jeddah Western Region
at its establishment at
Al Khomra, South Corniche, Jeddah, Al Khomrah, 21432, Saudi
Arabia
has satisfied the Authority that it operates a quality management system that complies with the
requirements of BS EN ISO 9001 and the relevant CARES Quality and Operations Assessment
Schedules. Where appropriate, and as listed below, it has further satisfied the Authority that it
manufactures and/or supplies products that conform with the stated product standards and is
entitled to use the CARES marks on its products using the processes and procedures registered
with the Authority.
Scope of certification:
Production of steel reinforcement as stated on the attached appendix
This certificate remains the property of the Authority and is issued subject to the Regulations of the Authority. This
certificate is uncontrolled when printed. To check the validity of this certificate please scan the above Static QR
Code with the CARES Cloud App or contact us on +44 1732 450000.
PRINTED ON 26/12/2023 FROM CARESCERTIFICATION.COM
Lee Brankley,
Chief Executive Officer
The use of the Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 0002.
UK Certification Authority for Reinforcing Steels, Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK.
A Company Limited by Guarantee. Registered in England No. 1762448.
Cert. Ref: AllC112010 74601 2313 v01
APPENDIX TO CARES CERTIFICATE NO. 231006
AL RAJHI STEEL INDUSTRIES CO. LTD. JEDDAH WESTERN
REGION
AL KHOMRA, SOUTH CORNICHE, JEDDAH
AL KHOMRAH, 21432, SAUDI ARABIA
Scope of certification:
ASTM A615:2020 Grade 60 Bar 12 to 32mm.
ASTM A615:2020 Grade 80 Bar 10 to 32mm (including the equivalent imperial sizes).
This certificate remains the property of the Authority and is issued subject to the Regulations of the Authority. This
certificate is uncontrolled when printed. To check the validity of this certificate please scan the above Static QR
Code with the CARES Cloud App or contact us on +44 1732 450000.
PRINTED ON 26/12/2023 FROM CARESCERTIFICATION.COM
Lee Brankley,
Chief Executive Officer
The use of the Accreditation Mark indicates accreditation in respect of those activities covered by the accreditation certificate number 0002.
UK Certification Authority for Reinforcing Steels, Pembroke House, 21 Pembroke Road, Sevenoaks, Kent, TN13 1XR, UK.
A Company Limited by Guarantee. Registered in England No. 1762448.
Cert. Ref: AllC112010 74601 2313 v01
Quality Plan
QC QP 01
U U
1- Revision Table
U
1(PDF) CEO
The following table summarizes billet steel grades we can produce according to the most
common standards:
Dimension
Product Shape Length Common Specs. & Steel Grades
Range
Billets
According to the - Billet ST Gr 60
Straight Billets - Billet ST Gr 40
chemical properties Cross section Up to
with square - Billet Gost 380-05 ST 5SP
required by the 130 x 130 mm 14 m
cross section - Billet Gost 380-05 ST 4SP
applied standards or
customer requirement - Billet Gost 380-05 ST 3SP
(QC WI 01)
Straight D 10 mm
Deformed Bars in
Deformed bar up to 12 m or 6 ASTM A 615 M (Gr. 280, 420 and 520)
bundle
(DB) D 40 mm
Straight D 10 mm
Deformed Bars in
Deformed bar up to 12 m or 6 BS 4449: 2005 Grade B500B
bundle
(DB) D 40 mm
Straight D 10 mm
Deformed Bars in
Deformed bar up to 12 m or 6 ISO 6935-2 Grade B500BWR
bundle
(DB) D 40 mm
Straight D 10 mm
Deformed Bars in
Deformed bar up to 12 m or 6 SASO ASTM A 615 M (Gr. 280,420 and 520 )
bundle
(DB) D 40 mm
Plain or 5.5 to 16 mm -ASTM 510 M (AISI 1006, 1008, 1012)
Wire Rod in coil
Deformed Coil 6 to 16 mm -ASTM 615 M (Gr. 280, 420)
The Quality Plan has been prepared by the Quality Department Manager, who is
considering the compliance with the quality policy, then revised and finally approved by
Jeddah Business Unit VP/ Management Representative.
- The quality manager is responsible for issuing and amending the quality
plan.
- QA- document control specialist responsible for distributing the QP to the
concerned person according to the distribution list, and update the quality
plan revision table in case of any amendment by the quality manager.
- In case of any amendment or adding a new annex in the quality plan,
document control specialist distributes the new page (s) and withdraws the
obsolete one (s) then the revision table should to be updated accordingly.
OK
NOT OK
YES FINALLY ACCEPTED REJECTED
Approved MRB
QC-Hold, Issue MRB Report CCM Material Handling Jeddah Decision
For Billet Storage & Clearance
QC-Temporary storage for the Dispatching by QC
Produced Billet (Checking &,
Identification)
Approved
QC-Claim to the supplier MRB
through purchasing Decision Material Transfer
dept. QC-Verification of Physical/ Material
NOT ACCEPTED Chemical Properties
Handling
ACCEPTED Charging to HRM Charging to HRM Voucher
QC- Issue QC to MH
Furnace C,D Furnace A,B
ACCEPTED ERP Billet
move order
Result?
NOT
ACCEPTED
Rolling Process
QC-Hold, Identify the Billet(s) Adjust billet length 4 , 6 or
by (x) yellow Issue MRB 12 mtr for rolling and keep
Report the accepted tolerance
On line inspection
Samples at Cold shear ( Rebar)
Approved or after conveyor (Coil)
Further Investigation by QC Transfer
- Sample for internal cracks or surface
ACCEPTED Rework
Voucher QC
- Macro Analysis to MH
- Check the chemical properties in heat passport
- Decide in which rebars dia. It will be suitable to achieve the MRB NOT OK
QC-Remove the (X) yellow Result of Visual QC Call Production for
mechanical properties of the steel grade Decision readjusting
color Inspection & Tests
- Pilot Rolling (If needed
NOT
ACCEPTED QC-Chemistry deviation OK
Accepted for rolling
QC-Change the (X) yellow alocate the heat size wise Production- Fix the white tag on the
color to Red color bundle(s) / Coils after tying
ACCET AS IT IS MRB
OK
Decision
Results?
NOT OK REJECTED
Industries Co.-Jeddah
Steel Plant
Instructions Drawings
Raw Material
Incoming inspection
1 (Scrap , Raw Material)
6
Inspection and
Temporary Storage
7
Billet Marking and Color
identification
INSPECTION
PROCESS OPERATION
OTHERS
Local or
Instructions Drawing Imported Billets
RSCL-7.5-OW-03 , RSCL-7.5-OW-04
R.F.
RSCL-7.5-OW-05 , RSCL-7.5-OW-06 Billet charging &
RSCL-7.5-OW-07 , RSCL-7.5-OW-19 1
RSCL-7.5-OF-18
R. P. Rolling Process
RSCL-7.5-OF-16 2 (Roughing, Intermediate,
Finishing Stages)
RSCL-7.5-OW-16 4 Bundling
RSCL-7.4-OW-01 , RSCL-7.4-OW-02
6 Storage of bundles
RSCL-7.4-OW-03
RSCL-7.4-OW-04 , RSCL-7.5-OW-19
7 – Dispatching to Customer
RSCL-7.5-OF-10
Inspection
Process Operation
Others
Rolling Process
R.P
(Roughing, Intermediate,
2
Finishing stages)
4 Bundling
6 Storage
7-Dispatching to Customer
INSPECTION
PROCESS OPERATION
OTHERS
Work
DraRings Iocal
Instruction
imported billet
41
Iot / cold charging billets
Re-heating Furnace 2
Roughing stage 3
Center line
9 9
CV3-CVR5- 012-0690 CV3-CVR5- 012-0690
13
CV4- CVR -012- 0690 11 11 CV4- CVR -012- 0690
PROFESS OPERATION
Tying aachine 17 OTHERS
Weighing / labeling 18
Final inspection 19
20-DispatcOing To Fustomer
(Steel Plant)U
1- Inspection
-Charging 1-1 Scrap &1.1.1 1-2 Lime 1-3 Fe-Alloys 1-4 Coke & Coal
6- Inspection DRI/HBI ime
& Storage
Sample Preparation
2-EAF
5- Cutting &
Cooling
2-Rolling Process
Test of
Mechanical
Properties
3-Cutting, Inspection & Testing
7-Dispatching
On line inspection
Customer 4-Bundling
Test of
Chemical 5-Tagging
Properties
2-Operation of
Reheating Furnace 1-Cold Billet
charging to
Furnace
Customer
20-Dispatching to customer
3, 4, 5, 6, 7-Rolling Processes
Customer
19-Dispatching to customer 3, 4, 5-Rolling Processes
6, 7- Pre-cooling system.CV5
and fast finishing
Production
Chemistry &
Chemical analysis -Weight chem. analysis
1.2 Lime & Dolomite Physical QC WI 20
Reactivity test Reactivity tester
U
Properties
1.3 Ferro Alloys
U
a- FeMn U Mn%, C% QC WI 10
Chemistry &
b- FeSi Si% QC WI 21 -X-Ray (XRF)
U
Physical
c- FeSiMn
U
Properties Si%, Mn% QC WI 18
d- Florosbar Chemical Analysis Ca, F
1.4 Coke and Coal
Fixed C
Production
Control&
a- Coal charged in bucket
Quality
Chemistry & Ash Volatile
QC WI 10 -X-Ray (XRF) As per request (PR
Physical Moisture Content
b- Coke added in LRF QC WI 24 -Visual Inspection or PU)
Properties Sulfur Content
c- Carbon for foaming slag Grain Size
QC OP 01
-Chemistry of QC WI 02 O.E Spectrometer
QC Every Heat for
2- Electric Arc Furnace (EAF) molten metal Spectrometer Analysis QC WI 10 XRF Spectrometer
molten metal -“Slag
- Slag “Element concentration” QC WI 22
upon request”
-Temperature MS OP 01 & Prod. Temperature
MS WI 01
- Quality Control Procedure for Steel Plant (including incoming billet) cont.
U
Quality Control
Sample Size, Control
Sequence Quality Inspection Method Frequency
Quality item Criteria &Ref. sec.
characteristics
-Chemistry of molten QC WI 02
metal QC WI 10 O.E Spectrometer
QC
-Slag. Spectrometer QC WI 22 XRF
3- Ladle Furnace (LRF) Each Heat
-Temperature Analysis
“Element MS OP 02 & MS WI
Prod. Temperature
concentration” 10
Spectrometer O.E Spectrometer
Every Heat for
-Chemical Analysis Analysis QC WI 02 Q.C
molten metal –
4- Casting (CCM Tundish) “Element MS WI 110
“ slag upon
concentration C, Si,
ccm Temperature request”
P, S, Mn
Heat Number & Strand
5- Cutting & Cooling on the bed
Number
-Visual Every
Control
Quality
Incoming Billet Defects QC WI 01 - Measuring tape , vernier Shipment
6- Inspection Physical Properties Dimension
& micrometer
Produced Billet Counting Every Heat
-Identification by
7- Billet Identification Marking Heat No./color QC WI 09 QC Painting Each Billet
for grade
Quality Control
Sample Size, Control
Sequence Quality Inspection Method Frequency
Quality Item Criteria &Ref. sec.
Characteristics
RSCL-7.5-OW-03
RSCL-7.5-OW-04
-Lot# RSCL-7.5-OW-05
As per acceptance MH, PR,
1 – Billet charging to furnace -Steel Grade RSCL-7.5-OW-06 Visual Every Batch
criteria, billets temp. QC
-Number of billets RSCL-7.5-OW-07
RSCL-7.5-OW-19
RSCL-7.5-OF-18
As per applied Every Plant set
2 – Rolling Process -Dimension RSCL-7.5-OF-16 PR Measurements
Standard & size up
RSCL-7.5-OW-18
-Dimension
As per applied RSCL-7.5-OW-20 Visual, Spectrometer, According to
3 – Cold shear cutting, Inspection -Chemical Analysis
Standard/Grade & RSCL-7.5-OW-21 QC, PR Balance, Venire, UTM & applied
& testing. -Mechanical Prop.
size RSCL-7.5-OW-22 Bending standard
-Shape, Alignment
RSCL-7.5-OF-10
-Manufacturer -Heat #
RSCL-7.4-OW-04 Visual & Checking the
Certificate -Chemical Analysis
7 – Dispatching to customer RSCL-7.5-OW-19 MH, QC test results in the Bundle , Trucks
-Weight, #of bundles, -Mechanical Prop.
RSCL-7.5-OF-10 certificates
size as per order. -Applied Standard
Quality Control
Sample Size, Control Inspection
Sequence Quality Frequency
Quality item Criteria &Ref. sec. Method
characteristics
-Heat # or Lot # QC WI 01 MH
As per acceptance
1- Billet charging to furnace -Steel Grade MH WI 02 PR Visual Every Heat or Every Batch
criteria, Billet Temp.
-Number of billet PR WI 02 QC
Quality Control
Sequence Sample Size, Control
Quality Inspection Method Frequency
Quality item Criteria &Ref. sec.
characteristics
-Heat # or Lot # PR WI 200 MH
1- Hot or cold Billet charging to As per acceptance Every Heat or Every
-Steel Grade QC WI 01 PR Visual
furnace criteria, Billet Temp. Batch
-Number of billet MH WI 02
As per Operation
2- Operation of Reheating Furnace Heating area Temp Billet Temp PR WI 201 PR Monitor & Control
Manual
Quality Control
Sequence Sample Size, Control
Quality Inspection Method Frequency
Quality item Criteria &Ref. sec.
characteristics
PR WI 213
16,17,18- Automatic bundle
Tighten, short bar PR WI 215 Visual
collection, Tying, Weighing and Shape, Alignment PR Each Bundle
collection QC 04 & QC 015& Welding Gun
labeling
White Tag
PR WI 217
-Manufacturer Heat No. -Visual & Weight
MH WI 03 - Checking the test
Certificate MTC Chemical Analysis PR,
20- Dispatching to customer QC WI 09 results in the Bundles, Trucks
-Weight, # of bundles, Mechanical Properties MH, QC
White Tag certificates
size as per order Applied Standard
Quality Control
Sequence Sample Size, Control
Quality Inspection Method Frequency
Quality item Criteria &Ref. sec.
characteristics
-Heat # or Lot # PR WI 200 MH
1- Hot or cold Billet charging to As per acceptance Every Heat or Every
-Steel Grade QC WI 01 PR Visual
furnace criteria, Billet Temp. Batch
-Number of billet MH WI 02
As per Operation
2- Operation of Reheating Furnace Heating area Temp Billet Temp PR WI 201 PR Monitor & Control
Manual
PR WI 202
As Per applied PR WI 203 As per operation
-Dimension, Temp.
3,4,5- Rolling Processes standard/Grade & PR WI 205 PR Measurements Manual, operating
Size PR WI 219 procedure
PR WI 222
As per operation
6, 7, 8- Pre-cooling system. CV5 (micro structure) and
Temp, Water flow rate PR WI 219 PR Monitor & Control Manual, operating
and fast finishing Dimension
procedure
9,10,11,13- Wire cooling, bar PR WI 219 As per operation
quenching, pinch roll, LFH, Temp, Water flow rate (micro structure) PR Monitor & Control Manual, operating
PR WI 234
conveyor and coil collection procedure-each coil
Quality Control
Sequence Sample Size, Control
Quality Inspection Method Frequency
Quality item Criteria &Ref. sec.
characteristics
PR WI 214
PR WI 215
PR WI 216
As Per applied QC WI 08 PR, QC As per operation
14,15,16- Trimming/inspection, Measurements &
Dimension, Weight standard/Grade & Manual, operating
compacting, Weighing/labeling QC WI 09 Weighing
Size procedure-each coil
QC WI 41
QC 006
QC 007
TABLE OF CONTENTS
Section 1
1.0 Introduction
1.1 About the Quality, Occupational Health & Safety Management System Manual
Section 2
2.0 Scope & strategic directions
2.1 Scope of work
2.2 Applicability
2.3 Strategic directions: Vision, Mission, values and strategic themes
2.4 Quality, Occupational Health and safety Policy
2.5 Manual Changes & Modifications
Section 3
3.0 Company Process Model
3.1 Process Approach
3.2 Process Identification
3.3 Process Control Chart
Section 4
4.0 The Quality, Occupational Health & Safety Management System
4.1 Understanding the Organization Context
4.2 Understanding the Needs and Expectations of Interested Parties
4.3 Determining the Scope of Q, OH& S management system
4.4 Quality, Occupational health & Safety Management System and its Processes
Section 5
5.0 Leadership
5.1 Leadership & Commitment
5.1.1 General
5.1.2 Customer Focus
5.2 Quality, Occupational Health & Safety Policy
5.3 Organizational Roles, Responsibility & Authorities
5.4 Consultation and participation of workers
Section 6
10.0 Improvement
10.1 General
10.2 Nonconformity & Corrective Actions
10.2 Incident, Accident Investigations
10.3 Continual Improvement
Appendices
A-1 Abbreviations
A-2 Documentation Matrix
Summary of Change
1. Introduction
1.1 About the Quality, Occupational Health & Safety Management System Manual
AL Rajhi Steel Industries Co. -Jeddah is part of RAJHI STEEL group KSA.
AL Rajhi Steel Industries Co. -Jeddah, through all levels, is committed to the development and
implementation of the Quality, Occupational Health & Safety Management System. In so forth, this
manual has been reviewed and updated to satisfy the Quality, Occupational Health & Safety
standards requirements for ISO 900I:2015 & ISO 45001:2018.
2. Introduction
"Production of the following steel products to conform to national and international standards
and its relevant steel grades to fulfill customer requirements:
The Quality, Occupational Health & Safety Management Systems is covering all activities within AL
Rajhi Steel Industries Co.-Jeddah.
A Brief on the Company: AL Rajhi Steel Industries Co.-Jeddah is one of the remarkable steel
producers.
Location of the Factory: Jeddah City, AL Khomrah Dist. South Kornach, King Faisal Street.
Company Activities: The following summarizes the products by family of AL Rajhi Steel Industries
Co.-Jeddah in terms of their size, shape, and steel grades. The combinations of size, shape, and
steel grade are set in accordance with the different standards specified by the customers to meet
their demands.
AL Rajhi Steel Industries Co.-Jeddah products are straight bars in bundles, Wire rod and steel
billets
Product Shape Size Range Length Standard/Steel Grades
Straight Billets Cross Section According to the chemical specifications
Billets with square cross Up to 14 m required by the applied standards or
section 130 X 130 mm customer requirement.
Normally 12 m SASO ASTM A 615 (GR.280, 420 and 520).
Deformed in Diameters in Length or as Per ASTM 615 M (GR.280, 420, and 520)
Bars
bundles 12 – 40 mm Customer British Standard 4449-05 (GR. B 500 B)
Requirements ISO standard 9635-2
Wire Rod Plain in Coils 5.5 – 16 mm - ASTM 510 M/AISI 1006:1012
Wire Rod Deformed in Coils 6 – 16 mm - ASTM 615 M (GR.280, 420)
Telephone / Fax:
Total Area : 1,000,000 m2.
Area of Production : (13,662 m2 HRMC – 45,000 m2 – 21,005 m2 Steel Plant).
Factory layout:
Fig. (1) Demonstrates the utilities, bays, and principal sections of the factory.
Support activities
These are the activities that support the primary activities, they are the generic core processes of
the business and these are:
Top management activities, reviews, planning.
Financial activities.
Information Technology activities and support (communication, LAN, Website, etc.)
Quality management activities.
Occupational Health and Safety management activities.
General Service's activities building maintenance, workplace maintenance.
HR, recruitment, training and accommodation.
Technology development (Improvement activities, product and process enhancement, supplier
evaluation, researches and surveys etc.)
2.2 Applicability
AL Rajhi Steel Industries Co.-Jeddah implements all clauses of the standard ISO 900I:2015 except
the following clauses are not applicable:
ISO 9001:2015 clause: 8.3 Design and development of products and services.
Justification: AL Rajhi steel industries co. - Jeddah produces billets, steel re-bars and coils
according to pre- determined national and international standards accordingly the company is not
involved in any design and developments.
ISO 900I:2015 clause: 8.5.1 (t) validation and periodic revalidation subsequent monitoring and
measurement
Justification: As AL Rajhi steel industries co. - Jeddah can verify the resulting output of its products
by subsequent monitoring and measurements. All products are verified according to the
international and local standards criteria before release to customer. No further validation
processes are applied to AL Rajhi steel products and the company conducts no special processes.
The first perspective will handle the process that affects the product quality and customer
satisfaction. Therefore, it takes into account all stakeholders involved in the specific process. This
essentially will include conformity to specifications and standards of the product, means to monitor
customer satisfaction and methods to evaluate the effectiveness of the process through
predetermined acceptance criteria.
The second perspective will handle the process from Occupational Health & Safety point of view.
Focus is on how risks and hazards are assessed, accidents and incidents avoided or mitigated in
case of occurrence, regulations and legislation satisfied, and interested parties protected in the
workplace.
For all perspectives, the Quality, Occupational Health & Safety Management System will evolve
into a continual improvement process through regular reviews, evaluation, and implementing
enhancing programs.
(Fig 3) demonstrates the process relation between the different core business processes of
quality management system for AL Rajhi Steel industries Co.-Jeddah.
(Fig 4) demonstrates the process relation between the different core business processes of
occupational health and safety for AL Rajhi Steel industries Co.-Jeddah.
The Quality, Occupational Health & Safety Management System adopted by AL Rajhi Steel
Industries Co. Jeddah at the achievement of competitive advantage through better performance of
its core business processes than its competitors and to meet customer satisfaction.
3.2 Process Identification
AL Rajhi Steel has promoted the adoption of a process approach when developing,
implementing, and improving the effectiveness of the Quality, Health & Safety
Management System, to enhance customer satisfaction by meeting his requirements.
In addition, the company gave special consideration to:
Responsibility toward occupational health and safety.
Identification of statutory and regulatory requirements and other requirements.
The following table illustrates the identified company processes at a detailed level.
Department/
Documented Information Code Owner
Function
Documented information procedure QA OP 01
Internal Audit procedures QA OP 03
Corrective and preventive action procedure QA OP 04
Continual improvement procedure QA OP 05
Management review procedure QA OP 06
Quality
Context of organization procedure QA OP 07 Quality Manager
Assurance
Interested parties procedure QA OP 08
Risk management procedure QA OP 09
Change management procedure QA OP 10
Control of customer and external providers
QA OP 11
proprieties
Quality plan QC QP 01
Inspection and testing product QC OP 0l
Quality
Control of non-conforming product QC OP 02 Quality Manager
Control
Calibration for tools and equipment QC OP 03
Product identification and traceability QC WI 09
Raw material, scrap, billet and finished product handling
Process for Equipment control MH PRO 01 Material
Material
Process for Billet handling MH PRO 02 Handling and
handling and
Process for Finished product handling MH PRO 03 Warehouse
warehouse
Process for Scrap handling MH PRO 04 Manger
maintenance Manager
Process for electrical maintenance troubleshooting EM PRO 03
Process for electric workshop EM PRO 04
Process for mechanical maintenance corrective
MM PRO 01
maintenance
Process for mechanical maintenance planned
MM PRO 02
shutdown
Process for preventive maintenance MM PRO 03 Mechanical
Mechanical
Process for unplanned shift corrective action MM PRO 04 Maintenance
Maintenance
Process for wilding works MM PRO 05 Manager
Process central workshop manufacturing CS PRO 01
Process central workshop repair CS PRO 02
Process central workshop technical office CS PRO 03
Process for foreign purchasing PU PRO 01
Purchasing
Purchasing Process for local purchasing PU PRO 02
Manager
Process for support raw materials PU PRO 03
Scrap Process for scrap purchasing PU PRO 04 Scrap Purchasing
purchasing Process for billet purchasing PU PRO 05 Manger
Human
Human resource procedure HR OP 01 HR Manger
resources
Follow up Procedure IT OP 01
Hardware and software request procedure IT OP 02
IT Maintenance procedure IT OP 03 IT Manger
Service request procedure IT OP 04
Change Request Management Procedure IT OP 05
Sales Process Sales &
Sales & CSPF-7.2-
Customer requirement and satisfaction. Marketing
Marketing Customer complaints and feedback OP-01
Manger
Occupational Health & Safety procedures & Work Instructions
Planning for Hazard identification, Risk Assessment
HS OP 31 01
and Risk Control
Legal and other requirements HS OP 32 01
Communication, Participation and Consultation HS OP 43 01
Safety Operational Control Procedure HS OP 46 01
Safety Manager
Emergency Preparedness and Response HS OP 47 01
Performance Monitoring & Measurement HS OP 51 01
Evaluation of compliance HS OP 52 01
Incidents investigation HS WI 10
Fire fighting Firefighting work instructions FF WO 1,2,3
Fig. (4, 5,6 and 7) illustrates the production operations, the product handling, transfer,
and storage operations, as well as the different inspection and testing areas.
The external and internal factors have been identified by Al Rajhi Steel quality committee and
retained as documented information.
The Interested parties are listed & classified taking into consideration, how to meet these
requirements, and how to communicate with them regarding to their requirements are
determined, and documented information regarding to that is kept up to date.
The scope of Q, OH&S Management System is aligned with Al Rajhi Steel strategic directions
"vision, mission, Values, and strategic themes".
See Scope & strategic directions section "02"of this manual'' for full details
4.4 Quality, Occupational Health & Safety management system and its processes
AL Rajhi Steel has established, maintained and implemented a Q, OH&S management systems
including process needed and their application throughout the organization which consist of:
o Q, OH&S policy
o Q, OH&S objectives
o Q, OH&S manual
o QA procedures
o Safety procedures
o Forms / records
AL Rajhi Steel has adopted a process approach for its management system. By identifying the
QA/business processes within the company, and then managing each of these discretely, this
reduces the potential for nonconforming discovered during final processes. instead,
nonconformities and risks are identified in real time, by actions taken within each of the top-
level processes.
o Purpose
o Scope
o Related documents
o Process map
o Procedure
The above Fig (3) diagram shows the interaction between QMS process and Fig(4) shows the
interaction between OHS process in Al Rajhi steel Jeddah Co . (Page 15)
5. Leadership
5.1 Leadership and commitment
5.1.1 General
AL Rajhi Steel industries Co. Jeddah top management along with the other management staff
demonstrate leadership with respect to Al Rajhi Steel Q, OH&S management system through
motivating and empowering persons to contribute to the effectiveness of Al Rajhi Steel management
system.
b) Ensuring that the quality policy and quality objectives are established for the quality
management system and are compatible with the strategic direction and the context of
the organization;
c) Ensuring that the quality policy is communicated, understood and applied within the
organization;
d) Ensuring the integration of the quality management system requirements into the
organization's business processes;
f) Ensuring that the resources needed for the quality management system are available;
h) Ensuring that the quality management system achieves its intended results;
l) Ensuring Q, OH&S Policy and related objectives are established in accordance with
strategic directions.
m) Communicating directions and values regarding the Quality, Occupational Health &
Safety Management Systems.
q) Ensuring process inputs activities and outputs are clearly defined and controlled.
s) Continually improve its products quality, processes and activities as stated in the policy.
CEO has formed a quality committee from different management members along with
assigned duties.
b) The risks and opportunities that can affect conformity of products and services and the
ability to enhance customer satisfaction are determined and addressed;
c) The focus on consistently providing products and services that meet customer and
applicable statutory and regulatory requirements is maintained.
a) The quality department established the key product characteristics in the quality plan
document.
c) Marketing department deals with and feedback the customer complaints, implements
customer satisfaction measurements as per procedure.
f) The current and potential impacts on society in general, and the local community in
particular, of its products, processes and activities.
The following table summarizes the accountabilities and responsibilities of the key positions for the
different elements of the Management System:
Key Positions Q&HS Element
- Establishing of QHS policy.
- Forming Quality Committee
CEO
- Appointing of OH&S Management Representative (s).
- Establish RS's strategic directions
- Establishment Approval of RS's Overall Q, OH&S Objectives
Vice President Operation
- Ensure the alignment with RS's strategic directions
- Reporting on the performance of the Q, OH&S Management System;
- Providing opportunities for improvement for the Q, OH&S
Management System
Quality Committee - Ensuring the promotion of customer focus throughout the
organization
- Ensuring that the integrity of the Q, OH&SMS is maintained when
changes are planned and implemented.
OH&S Management - Reviewing the OH&S objectives.
Representative - Preparation of management reviews.
- Develop Q, OH&S objectives and program (s)
All Process Owners
- Comply with defined processes, procedures and policies
Quality Assurance
- Monitor overall Quality, OH&S Management System performance
Engineer
Occupational Health and - Monitor and measure overall OH&S performance
Safety Manager - External Communications in emergency cases.
Human Resource
- Communication, resources, licenses and medical check.
Manager
Training Process Owner - Training, Awareness, and competence
- Internal Communication
- Reporting system performance
- External communication in case of customer complaints (Co- ordinate
with sales Dept. as well as Certification bodies and calibration
Quality Manager
agencies
- Ensure business risks and opportunities are identified and
communicated.
AII Process Owners - Ensure continual improvement
Sales and Marketing
- Identify customer expectations and control of others performance
Process Owners
Purchasing Process Owners - Identify suppliers expectations
Financial Manager - Develop and Maintain accounting procedures
Authorities and responsibilities of all personnel who implement and control the Quality, Occupational
Health and Safety are defined and documented in their job description. These documents are kept in
Quality Assurance (original)/Human Resource and each department keeps a copy of these documents
for their employees. Each employee gets a copy of his job description upon request.
The Organization:
AL Rajhi Steel Industries. Co.-Jeddah organization is shown in Figure No (8). It comprises the CEO, the
Vice Presidents,
Quality & Safety Management organization charts are shown in Figure No (9) & No (10) respectively.
Managing
Director
CEO
VP VP VP VP VP
Operations Finance, HR, IT Sales & Marketing Procurement & Projects &
Logistics Development
Communication means might include, but not limited to, the following: o Team briefing.
Notice boards.
More details in the "Internal & External Communication defined in Procedure# (HS OP 43-01)
Consultation:
Jeddah Business Unit Vice President Operation has established the appropriate means for Consultation
to ensure pertinent OH&S information is communicated to and from employees and other interested
parties. Employees ' involvement and consultation arrangements are documented and interested
parties informed.
Involved in the development and review of policies and procedures to manage risks.
Consulted where there are any changes that affect workplace health and safety.
OH&S Committee:
The OH&S Committee is appointed to represent all functional sections in the plant.
The committee held its meeting on a monthly basis. They support the OH&S Management
Representative in the following:
Consultation where there are any changes that affects workplace health and safety.
The initiation and Completion of corrective and preventive actions applicable to OH&S
matters, and the confirmation of their effectiveness.
The following aspects have been considered during the planning of Q, OH&S:
a) Organizational context
While AL Rajhi Steel Industries Co.-Jeddah setting the quality and OH&S objectives, AL Rajhi Steel
Industries Co.-Jeddah takes into account the following;
b) Be measurable;
e) Be monitored
f) Be communicated;
g) Be updated as appropriate.
j) Technological options.
When AL Rajhi Steel Industries Co.-Jeddah planning how to achieve its quality objectives, we shall
determine:
The OH&S objectives and program (s) are assigned through process owner, reviewed by division
director and approved by Management Representative (MR) and cover:
Changes.
AL Rajhi Steel Industries Co.-Jeddah has established, implemented, and maintained OH&S
programme(s) for achieving its objectives. These objectives are significant, measurable, achievable,
relevant and time framed.
The means and the time frame by which they are to be achieved
The Quality objectives, Occupational Health & Safety objectives and program (s) are reviewed at
regular and planned intervals. Where necessary, the program(s) are amended to address changes to
the activities, products, services, or operating conditions of the company.
The Quality department collects the objectives and program (s) documents from departments then
after approval it will be documented (original document) in document control and copies to be
distributed to process owners.
Detailed OH& objectives and program (s) covered in document# (HS QA 01).
Both the objectives and the needed resources are input to the management review. The programme
(s) I Action plan(s) are reviewed at regular and planned intervals, and adjusted as necessary, to ensure
that the objectives are achieved.
6.3 Planning of changes
When AL Rajhi Steel determines the need for changes to the Q,OH&SMS or its processes, these
changes planned, implemented, and then verified for effectiveness considering the following:
Activities of all personnel having access to the workplace (including suppliers and
visitors).
The Company ensures that the results of these assessments and the effects of
these controls are considered when setting its OH&S objectives. The Company
documents and keeps this information up to date.
Is defined with respect to its scope, nature and timing to ensure it is proactive
than reactive.
Provide for the classification of risks and identification of those that are to be
eliminated or controlled by measures as defined in item (Objectives and
program (s).
Provide for the monitoring of required actions to ensure both the effectiveness
and timeliness of their implementation.
Details are explained in the procedure (HS OP-31-01) - hazard Identification &
Risk Assessment and Control.
6.2 Legal and Other Requirements
AL Rajhi Steel Industries Co.-Jeddah has established, implemented, and maintained a procedure for
identifying and accessing the legal and other OH&S requirements that are applicable to its activities.
The company keeps this information up to date. It communicates relevant information on legal and
other requirements to its employees and other relevant interested parties.
More details are explained in the procedure (HS OP-32-01) - Legal and Other Requirements.
7. Support
7.1 Resources
7.1.1 General
AL Rajhi Steel has ensured that the necessary resources are already provided lo implement, maintain
and continually improve Al Rajhi Steel Q, OH&SMS, and to address and enhance interested parties
satisfaction.
Purchasing Department ensures that the resources needed for the implementation of Al Rajhi Steel Q,
OH&SMS processes are identified and available in a timely manner.
Top management ensures that the work environment has a positive influence on motivation,
satisfaction, and performance of people in order to enhance the total performance of the company.
For creation of suitable work environment, the company implements the operational control
procedure and the emergency preparedness and response procedure, besides that the company has
determined and managed the following to achieve conformity of its product and protect the
environment:
Safety rules and guidance, including the use of personnel protective equipment
(PPE) as per the occupational health and safety operational control procedure#
(HS OP 46-01).
Workplace location.
Social interaction.
Cleanliness.
All activities related to this section of the QMS are regulated by Operating Procedure
Measurement Identification
Measurements and the required accuracy are identified by the product specification and standard for
selection of suitable equipment to perform these measurements is the responsibility of quality control
department.
All equipment used for inspection, measuring and testing of products or OH&S
aspects are calibrated with traceability to a national standard.
The quality control department assesses and records the validity of the previous
measuring results when the equipment is found not conforming to
requirements. It takes appropriate action on the equipment and any product
affected.
Operating Procedure (QC OP 03) regulates all activities related to the control of
calibration, identification and maintenance of inspection, measuring, and test
equipment used to demonstrate the conformance of products or the OH&S
aspects to the specified requirements.
AL Rajhi Steel Industries Co.-Jeddah applying an effective approach to acquire new knowledge by
attending conferences and exhibitions related to the steel industry local and region basis, also AL Rajhi
Steel Industries Co.-Jeddah is performing benchmark visits to similar organizations international wise.
7.2 Competence
Al Rajhi Steel personnel are competent based on appropriate education, training, skills and experience,
in addition, Al Rajhi Steel identifies the needed competence for each job according to the Al Rajhi Steel
organization chart.
All new personnel and sub-contractors working for AL Rajhi Steel Industries Co.-Jeddah are given an
orientation training to give an introduction to AL Rajhi Steel Industries Co.-Jeddah, explain both the
policy and Al Rajhi Steel Q, OH&S Management Systems requirements. The orientation training
ensures that personnel are made aware of the implications of not conforming to Al Rajhi Steel Q,
OH&S Management Systems requirements and their role during disruptive incidents or any emergency
situation.
Training Needs:
a) Analysis of the responsibilities and duties of the employees and deducing the necessary
knowledge and skills required by their job descri pt ions , and accordingly the training
needs for each employee are determined.
b) Collecting training needs for each department according to the employee needs specified
by the concerned divisions and departments.
'·See. HR work instruction HR-WI 01 - for determination of training needs·· for full details.
Providing Training:
Determines the necessary competence for personnel performing the different activities of the Quality,
Occupational Health & Safety.
Ensures that its personnel are aware of the relevance and importance of their activities and how they
contribute to the achievement of the Quality, Occupational Health & Safety policy and objectives.
Ensures that its personnel are aware of the ISO 45001:2018 consequences, actual and potential, of
their work activities and the benefits of improved personnel performance.
Determines the roles and responsibilities in achieving conformance to the OH&S policy and procedures
and to the requirements of the OH&S Management System, including emergency preparedness and
response requirements.
Training Records:
The Human Resources prepares and maintains records (provided to each department) for all internal
and external training provided to employees, according to operating procedure (QA OP 01)-
Documentation Information (control of records).
More details are provided in the operating procedures (HR-OP 01) & human resource policy manual.
7.3 Awareness
AL Rajhi Steel industries Co. Jeddah top management ensures that persons working under its control
are aware of:
e) The implications of not conforming with the legal requirements and other requirements,
Al Rajhi Steel Q, OH&S Management Systems and the interested parties requirements.
Awareness is created through induction trainings, communication, display of signs, etc. Additionally,
department periodically delivers awareness.
Internal communications are carried-out through internal communication channels (such as e-mails,
notice boards, intranet, internal comm, etc.) and Al Rajhi Steel employees have access to relevant
information through Al Rajhi Steel IT applications and different Communication facilities.
Any external communication from interested parties such as complaints, clarifications ... etc. received
by AL Rajhi Steel Industries Co.-Jeddah concerned person within the organization divisions.
Al Rajhi Steel Q, OH&S Management System documented information includes but not limited to the
following:
QA procedures
OH&S procedures
Operation procedures
Business processes
Creating and updating documents is conducted through "Documented Information Procedure" that
has been established to control all documented information that used within AL Rajhi Steel. The
procedure define responsibility for the documents and data approval, review, update and re-approva l,
availability of current revisions, removal and/or invalidation and proper identification of obsolete
documents and data, which are retained for legal or reference purposes.
All the documents related to Q, OH&S management system are reviewed and approved for adequacy
by authorized personnel prior to issue and are controlled.
Records are controlled and retained including the identification, storage, protection, retrieval,
retention time and disposition. These controls for ensure that records remain legible, readily
identifiable, retrievable and traceable.
As appropriate AI Rajhi Steel Q, OH&S Management System documented information will be available
to AL Rajhi Steel Industries Co.-Jeddah interested parties including customers and applicable
regulatory authorities.
8. Operation
8.1 Operational planning and control (Quality)
The Quality Control department established and implemented quality plans for AL
Rajhi Steel Industries Co.-Jeddah products. The Quality plans identify control methods, inspection
criteria, sample size, inspector's qualifications and test equipment to achieve the specified quality. In
addition, the appropriate inspections, the acceptance and rejection criteria of products, and the
method of handling nonconformities are established. The quality plan (QC QP 01) , details the quality
plans for billets, deformed and plain bars according to the National, and International Standards.
For those operations and activities AL Rajhi St el lnd.,1stries Co.-Jeddah implements and maintained:
• Applicable operational controls to AL Rajhi Steel Industries Co.-Jeddah activities & integrate
those operational controls into overall OH&S management system;
• Documented procedure(s), to cover situation where their absence could lead to deviations
from the OH&S policy and the objectives;
• Stipulated operating criteria where their absence could lead to deviations from the OH&S policy
and objectives.
• Details are provided in the operating procedure (HS OP 46-01) - OH&S operational Control.
• Product information.
Regarding contracts, orders handling, and customer feedback sales and marketing departments
implement an operating procedure# (CSPF-7.2-OP-0l) to receive, review and respond to customer
requirements, handling and delivering of these requirements as well as receiving, analyzing, and
feedback with customers in case of complaints.
8.2.2 Determining the requirements for products and services
All tenders, contracts, and orders are reviewed to assess if customer requirements are adequately
defined and are well understood and whether the company has the capability to meet the contract
requirements.
Production from hot rolling mill C dispatched to Rajhi Centers, the Sales department (Central in Riyadh)
sends a request contains the quantity and sizes to Jeddah material handling department, the material
handling department start loading the trucks to cover the quantity as per sales department request.
8.2.3 Review of the requirements for products and services
AL Rajhi Steel Industries Co.-Jeddah. Central sales department ensures that all incoming orders are
reviewed before acceptance. Reviews take place in order to ensure that all order fully reflects any
quotations provided and to ensure that the company can meet the requirements of the contract or
order.
Sales department define the manner in which sales inquiries are handled, quotations are raised, and
orders are reviewed to ensure that customer requirements are defined, any differences are resolved
and has the ability to meet the defined requirements.
Reviews are recorded by signature of the respective reviewers; the records are maintained in Sales and
material handling departments as per the operating procedure (QA OP 01 ).
8.2.4 Changes to requirements for products and services
AL Rajhi Steel Industries Co.-Jeddah. Will ensure that relevant documented information is amended,
and that relevant persons are made aware of the changed requirements, when the requirements for
products and services are changed.
The Emergency Preparedness and Response Procedure is the responsibility of Operations Sector. The
procedure is reviewed and revised where necessary and in particular after the occurrence of accidents,
incidents or emergency situations.
Concerned Department in co-operation with training and occupational health and safety sections
test the emergency plan periodically "every six months" for adequacy and effective implementation.
Appropriate records are maintained.
More details provided by the operating procedure (HS OP 47-01)-Emergency Preparedness and
Response".
AL Rajhi Steel Industries Co.-Jeddah evaluates and selects suppliers based on their ability to supply
product and service in accordance with the organization's requirements. Criteria for evaluation,
selection, monitoring of performance and re-evaluation are established.
Purchases are made via the release of formal purchase orders and/or contracts which clearly describe
what is being purchased. Received Products or Services are then verified against requirements to
ensure satisfaction of requirements. Suppliers who do not providing conforming may be requested to
conduct formal corrective action.
Detailed rules and instructions for assessment of suppliers are given in Operating Procedures
(PU OP 01) "Supplier evaluation is included" and processes (PU Pro 01} - local, (PU Pro 02)-
(QC WI 19) -Inspection of incoming materials and (WH WI O1) - material receiving.
Where the company proposes to verify purchased product at the supplier's premises, the verification
arrangements and the method of products release will be specified in the purchasing documents.
Verification of customer or his representative at supplier's premises and on receipt of the supplied
products is governed by operating procedure (QC WI 19).
8.4.3 Information for External Providers
Purchasing information describes the product to be purchased, including where appropriate:
All purchasing documents are prepared, reviewed and approved as per purchasing policy and
operating procedure (PU OP 01) and processes (PU Pro 01), (PU Pro 02), (PU Pro 03).
AL Rajhi Steel Industries Co.-Jeddah ensures the adequacy of specified purchase requirements prior to
their communication to the supplier.
a) The availability of documents or records that define the characteristics of the services. as
well as the results to be achieved;
At this time, AL Rajhi Steel does not utilize any process where the result of the process cannot be
verified by subsequent monitoring or measurement.
Production and individual operations are planned and documented. Personnel performing operations
are provided with work instructions. Production and process equipment are regularly checked and
maintained. Production areas are maintained to provide a suitable work environment.
Production Plan:
• Jeddah Business Unit Vice President Operation at the end of each year prepares the annual
production budget for the next year. From the annual budget and sales requirements, the
monthly production plans for rolling mills and steel plant are prepared by research &
planning section. The required materials for steel plant are identified in the budget by steel
plant manager, planned and requested by material planning & material purchasing section.
• Steel plant monthly billet production running as per the monthly plan in the budget, billet
chemical composition for the batches approved by the quality manager.
• Quality manager is the person in charge to allocate the monthly billet produced by
• steel plant in Jeddah and Riyadh rolling mill lines as per the monthly sales plans.
Production Control:
A. Manufacturing and technical divisions in AL Rajhi Steel Industries. Co.-kddah plan and carry out
production under controlled conditions which include (but not limited):
B. There are no special processes conducted by AL Rajhi Steel Industries Co.-Jeddah Production
personnel are provided with work instructions; needed equipment, measuring devices and
product characteristics
Quality control section apply the inspection and testing procedures to ensure that the production run
as per the approved specification / standard
Details are provided in the operating procedure (QC OP 01) - Inspection and testing, (MS OP 01), (MS
OP 02), (PR OP 01)
8.5.2 Identification and Traceability
• Each heat produced by AL Rajhi Steel Industries Co.-Jeddah has a unique number& steel
grade printed on each billet as well as color identification (if needed) provided by quality
control, the imported billet identified by heat number (if available) , billet charging to hot
rolling mill reheating furnaces by heat/ serial lot number, each bundle or coil identified by
serial number.
• Each bar produced by AL Rajhi Steel Industries Co.-Jeddah has the manufacturer and
origin country name
• white plastic tag contains all the needed data for traceability according to standard
requirements.
• More details of part and product identification provided in the operating procedure (QC
WI 09).
• Traceability:
• Products are traced at the stages of purchased materials, product ion, and final delivery.
• The Operating Procedure (QC WI 09) describes the traceability of products at different
stages.
8.5.3 Property belonging to customers or external providers
Al Rajhi Steel exercises care with customer or supplier property while it is under the organization’s
control or being used by the organization. Upon receipt, such property is identified, verified, protected
and safeguarded. If any such property is lost, damaged or otherwise found to be unsuitable for use.
this is reported to the customer or supplier and records maintained.
For customer intellectual property, including customer furnished data used for inspection, this is
identified by customer and maintained and preserved to prevent accidental loss, damage or
inappropriate use.
When the property of a customer or external provider is lost, damaged or otherwise found to be
unsuitable for use, Al Rajhi Steel report this incident to the customer or the external provider and
retain documented information on what has occurred.
··see. Control of customer & external providers proprieties Procedure - QA-OP- I \ '' for full details.
8.5.4 Preservation
Handling, Storage, Preservation and Delivery
AL Rajhi Steel Industries Co.-Jeddah Establishing a documented procedure for handling, storage,
preservation, and dispatching of products as well as providing methods and means to prevent product
damage or deterioration during handling, storage, preservation, and delivery.
Handling:
The material handling manager is responsible for the safe handling of materials, equipment and
products. He in particular ensures that equipment used for internal transportation of product is well
maintained, that operators are trained, and that product is safeguarded during handling.
Operating Procedures (MH WI 01), (MH WI 02), (MH WI 03), (MH WI 0_.), (MH WI
05), (MH WI 07) describe in more details the rules governing handling and dispatching processes.
Storage :
The Warehouse Manager is responsible for issuing procedures for material and spare parts storage,
only materials or spares that successfully pass inspection are allowed to enter or leave the storage
area of conforming materials, Storage areas are inspected periodically to assess the condition of stock
The material handling manager is responsible for issuing procedures for product storage (Billet and
Bundles), only products that successfully pass inspection are allowed to enter or leave the storage area
of conforming products.
(MH WI 04), (MH WI 05) and (WH WI 01), (WH WI 02), (WH WI 03) and (MH WI 07) governs
Preservation:
The rolling mill Production manager issues procedures for tying M/C's, Rolling Mill individual Product
are tied in bundle/coil and each tagged by a plastic white tag fixed on the final product.
After final inspection by quality control, products are safeguarded and stored by material handling in
adequate conditions to prevent damage and deterioration.
Deliveries:
Final products (Re-bars & wire rod) dispatching by material handling to Rajhi Centers. Billet dispatching
to Riyadh (for rolling mill A & 8) by material handling.
8.5.5 Post-Delivery Activities (Not Applicable)
AL Rajhi Steel Industries Co.-Jeddah - products and services are not associated with any post- delivery
activities as the main scope of AL Rajhi steel is limited to produce products according to pre-
determined national & international standards.
8.5.6 Control of Change:
AL Rajhi Steel Industries Co.-Jeddah reviews and controls both planned and unplanned changes to
processes to the extent necessary to ensure continuing conformity with all requirements.
(QC OP 02) and work instruction for inspection of final products by samples from rolling mills (QC WI
08) which includes references to the acceptance criteria.
As an evidence for final product release AL Rajhi Steel Industries Co.-Jeddah retain relevant Mill Test
Certificates and all test reports.
All nonconformities are identified and documented, regardless of how insignificant they seem to be or
how easily they can be repaired.
Nonconformities are recorded in nonconformity reports, following the rules provided in Operating
Procedure (QC OP 02)-Control of Nonconforming Product. Nonconforming products are marked with
labels and/or paints & segregated.
Quality Control section takes the decision for segregation of a nonconforming product when it is
obvious that the product must be hold or scrapped. Then the responsibility for review and the
authority for the disposition of non-conforming product are assigned to the Material Review Board
(MRB) the disposition decision may be:
• A Accept as it is
• D Rejected
• N Re- inspection
• C Regrading
• E Rework
Details for control of non-conforming products such as review, disposition decision and records are
described in operating procedures (QC OP 02)-Control of non-conforming.
9. Performance evaluation
9.1 Monitoring, measurement, analysis and evaluation
9.1.1 General
AL Rajhi Steel Industries Co.-Jeddah plans and implements the monitoring, measurement, analysis
and improvement processes needed to:
• Ensure conformity of the Quality, Occupational Health & Safety Management System.
Continually improve the effectiveness of the Quality, Occupational Health & Safety
Management System.
This includes determination of applicable methods, statistical techniques, and the extent of their use.
c) When the monitoring and measuring shall be performed; (when activities have impact on
Quality, OH& safety management system performance)
d) When the results from monitoring and measurement shall be analyzed and evaluated (on a
regular basis for the sake of continual improvement & in case of nonconformity to set
actions needed).
Documented Operating Procedures for inspection and testing activities are established (QC OP 01) to
verify that the specified requirements are met through all stages from receiving of purchased materials
and components up to the final products. Materials and products are prevented from use or delivery
to customers until successfully passing all required inspections. lnspection and test records are
maintained as an evidence of inspection and test activities.
Inspections of Material:
Purchased materials are inspected and tested upon arrival in accordance with the quality plans.
Only materials that successfully pass the required tests are allowed to enter production.
• Nonconforming imported materials are segregated and prevented from use until a
decision is taken , while nonconforming local materials are returned to the supplier
through purchasing department procedures .
• (QC WI 01)-Billet inspection explains the detailed instructions for performing and
recording these activities.
• The amount and nature of receiving inspection depends on the control exercised on the
suppliers, their past performance and their verification data (laboratory certificates, test
reports, certificate of analysis ... etc.).
• The Operating Procedures running in the production processes (PR Pro 01),
• (MS Pro 01), (MS Pro 02), (MS Pro 03) and (MS Pro 0 ) explain all activities related to the
in- process inspection.
• Final products are subjected to final inspection including visual inspection, mechanical
and chemical testing. Only those products that successfully pass the final inspection are
allowed to be transferred to the Final Products Warehouse and shipped to customers.
• The operating procedure (QC OP 01)-inspection and Testing" describe the detailed rules
for performing and recording final inspection and testing activities.
Inspection and testing results are recorded and signed by the personnel performing the
inspection and testing. The inspection and testing records are described in the operating
procedure (QC OP 01) which refers to inspection and testing work instructions, while filing and
maintaining of records are regulated by operating procedure (QA OP 01) .
Quality Assurance section in conjunction with each department manager surveys and identifies the
efficient indicators and their targets that necessary for process evaluation.
Periodically, each manager will use these indicators (Evaluation Criteria) to evaluate the process and
compare the results with targets. In case of deviation from stated targets the corrective and /or
preventive action will be taken as per the procedure (QA OP 04)-correct ive and preventive action.
Process evaluation will be subject for audit during periodical internal audits
9.1.2 Customer satisfaction
As one of the measurements of the performance of the Quality Management System, AL Rajhi Steel
Industries Co.-Jeddah monitors information relating to customer perceptions of the degree to which
requirements have been met.
As described sales and marketing are central departments for AL Rajhi Steel Industries Co. LTD.
Located in Riyadh, so measuring of customer satisfaction details described and covered by the
operating procedure (CSPF-7.2-OP-01).
9.1.3 Analysis and evaluation
AL Rajhi Steel Industries Co.-Jeddah has determined, collected and analyzed appropriate data to
demonstrate the suitability and effectiveness of the Quality, Occupational Health & Safety System, and
to evaluate where continual improvement of the effectiveness can be made. This includes data
generated as a result of monitoring and measurement and from other relevant sources.
g) Determine the need or opportunities for improvements within the quality management
system.
i) Success of Quality, Occupational Health & Safety System and activities perfonnance
improvement.
k) Benchmarking.
l) Competitiveness.
The results of analysis and evaluation clearly provided in monthly reports and audit reports as well as
management review presentations.
9.1.4 OH&S performance monitoring and measurement General:
AL Rajhi Steel Industries Co.-Jeddah has established implemented and maintained documented
procedures to monitor and measure on a regular basis the key characteristics of its operations and
activities that can have a significant impact on OH&S performance. These procedures provide for:
• Both quantitative and qualitative measures appropriate to the needs of the company;
• Proactive measures of performance that monitors compliance with the OH&S management
program (s), controls and operational criteria;
• Reactive measures of performance to monitor ill health, incidents (including accidents, near -
misses, etc.) and other historical evidence of deficient OH&S performance.
AL Rajhi Steel Industries Co.-Jeddah established a documented operating procedure (s) to monitor
and measure OH&S performance on a regular basis to verify the following:
• Regular monitoring and measurements of noise, light, heat stress and gases in work
environment to at least comply with the applicable legislation and regulatory requirements.
• All monitoring equipment are calibrated and ma i nta i ned. and records of this are retained.
[Refer to article (7.6)].
• Equipment for monitoring and measurement calibrated and maintained as per procedure #
• Copies of monitoring and measurement results are sent to Quality Assurance Department to
take action in case of non - conformances.
• OH&S section evaluates periodically the compliance with relevant legislations and regulations.
More details in procedures # (HS OP 32-01)-Legal and Other Requirements, (HS OP 52-01)
Evaluation of compliance.
9.1.5 Evaluation of compliance
AL Rajhi Steel Industries Co.-Jeddah established implemented and maintained a procedure to ensure
that occupational health & safety rules comply with legal and other requirement. Every year, the
Occupational Health & Safety Manager invites the HS Committee for evaluation or re-evaluation. The
team evaluates and determines whether the whole plant is compatible with the local regulation and
other requirements, all this is described in procedure# (HS OP-52-01).
a) Conforms to:
1. AL Rajhi Steel Industries Co.-Jeddah requirements for Quality, OH& Safety management
System, policy, risk assessment and objectives.
The Quality Manager establishes an internal audit plan scheduled in accordance with
Operating Procedure (QA OP 03)-internal Audits for Q, OH &S MS.
Each activity shall audit as per the frequency described, but more frequent audits may be
scheduled as deemed necessary as per process importance, risks and changes.
c) Select auditors and conduct audits to ensure objectively and the impartiality of the audit
process, the certified auditors performing internal audits (planed or unplanned) to AL Rajhi
Steel Industries Co.-Jeddah different Quality, Occupational Health & Safety activities. The
Quality assurance activities/Occupational Health and Safety department activities audits to
be executed by independent personnel, and are assigned by the Quality Manager, as
described in the Operating Procedure (QA OP 03).
internal Audits for both Quality and Occupational Health & Safety.
d) Ensure that the results of the audits are reported to relevant management, Audit results
shall be agreed then approved by auditee, department & quality manager
e) Take appropriate correction and corrective actions without undue delay, When
nonconforming conditions are identified, the responsible manager is requested to propose
and implement a corrective action. Implementation and effectiveness of the action are
verified by a follow-up audit. Conducting, documenting of audits and follow-ups are
governed by Operating Procedure (QA OP 03) internal Audits for both Quality and
Occupational Health & Safety.
The results of the internal Quality, Occupational Health & Safety audits are recorded and
maintained as per procedure (QA OP 02). and analysis of the audits are major inputs to
management review(s).
This review includes assessing opportunities for improvement and the need for any change to Al Rajhi
Steel Q, OH &SMS, including policies and objectives.
9.3.2 Management Review Inputs
Inputs (QMS)
6. Audit Results,
Inputs (OHS)
b) changes in external and internal issues that are relevant to the OH&S management system,
including:
c) the extent to which the OH&S policy and the OH&S objectives have been met;
4. audit results;
The outputs of the management review shall include decisions and actions related to
c) Resource needs.
Outputs (OHS)
a) the continuing suitability, adequacy and effectiveness of the OH&S management system in
achieving its intended outcomes;
d) resources needed;
e) actions, if needed;
f) opportunities to improve integration of the OH&S management system with other business
processes;
Regarding Outputs of OHS Management Review Top management will communicate the relevant
outputs of management reviews to workers, and, where they exist, workers’ representatives
AL Rajhi Steel Industries Co.-Jeddah will retain documented information as evidence of the results of
management reviews.
10. Improvement
10.1 General
AL Rajhi Steel Industries Co.-Jeddah will determine and select opportunities for improvement and
implement any necessary action to meet customer requirements and enhance customer satisfaction
these actions include:
a) Improving products and service to meet requirements as well as to address future needs and
expectations,
b) Evaluate the need for action to eliminate the causes of the non-conformity in order that it does
not recur or occur elsewhere by:
10.2.2 AL Rajhi Steel Industries Co.-Jeddah retains documented information as evidence of:
b) evaluate, with the participation of workers (see 5.4) and the involvement of other relevant
interested parties, the need for corrective action to eliminate the root cause(s) of the incident or
nonconformity, in order that it does not recur or occur elsewhere, by:
c) review existing assessments of OH&S risks and other risks, as appropriate (see 6.1);
d) determine and implement any action needed, including corrective action, in accordance with the
hierarchy of controls (see 8.1.2) and the management of change (see 8.1.3);
e) assess OH&S risks that relate to new or changed hazards, prior to taking action;
Corrective actions shall be appropriate to the effects or potential effects of the incidents or
nonconformities encountered.
— the nature of the incidents or nonconformities and any subsequent actions taken;
— the results of any action and corrective action, including their effectiveness.
AL Rajhi Steel Industries Co.-Jeddah communicate this documented information to relevant workers,
and, where they exist, workers’ representatives, and other relevant interested parties.
c) promoting the participation of workers in implementing actions for the continual improvement
of the OH&S management system;
d) communicating the relevant results of continual improvement to workers, and, where they exist,
workers’ representatives;
AL Rajhi Steel Industries Co.-Jeddah will consider the results of analysis and evaluation, and the
outputs from management review, to determine if there are needs or opportunities that shall be
addressed as part of continual improvement.
11. Abbreviations
RS: Al Rajhi steel
12. Appendix 1
Documentation Matrix
Cross Reference
ISO 9001:2015 Clause ISO 45001:2018 Clause Code
Document
4 Context of the organization
4.1 Understanding the 4.1 Understanding the Organizational Context
organization and its organization and its QA OP 07
Procedure
context context
4.3 Determining the scope 4.3 Determining the scope Q, OH&S Manual
of the quality management of the OH&S management ----
system system
5 Leadership
5.1 Leadership and 5.1 Leadership and
commitment commitment
6 Planning
6.1 Actions to address risks 6.1 Actions to address risks
and opportunities and opportunities
7 Support
7.1 Resources 7.1 Resources
7.1.6 Organizational
----
knowledge
7.4.2 Internal
----
communication
7.4.3 External
----
communication
8 Operation
8.1 Operational planning 8.1 Operational planning
and control and control
8.1.3 Management of
----
change
8.2.1 Customer
----
communication
8.2.4 Changes to
requirements for products ----
and services
8.7 Control of
----
nonconforming outputs
9 Performance evaluation
9.1 Monitoring, 9.1 Monitoring,
measurement, analysis and measurement, analysis and
evaluation performance evaluation
9.1.2 Evaluation of
----
compliance
10 Improvement
10.1 General 10.1 General
10.2 Incident,
---- nonconformity and
corrective action