Professional sterilization systems

Professional sterilization systems

Newmed was created to satisfy the needs of customers who

demand safety, reliability and simplicity all in one sterilization
instrument. And thanks to experience, technology and research,
we have been able to achieve this objective.

Nowadays NEWMED is a company certified

ISO 9001 and UNI EN ISO 13485.
 IT IS JUST A QUESTION OF TIME...

MODELS
KRONOS B 18 - 23
KRONOS B Speedy 6
KRONOS S 18 - 23
KRONOS N 18 - 23
ENERGY 18 - 23
NUBYRA 6
 Speedy 6

18-23
and
18-23

18-23
Kronos Autoclaves
fast sterilization
18-23

Fractionated Vacuum
Using a high-performance Double-stage
Vacuum pump

COMPLETE GRAPHIC CYCLE KRONOS B Pressure

Time

Start End
 KRONOS B 18-23
STERLIZABLE PRODUCTS

SOLID INSTRUMENTS

HOLLOW INSTRUMENTS

WRAPPED INSTRUMENTS

POROUS LOADS
 Kronos B
18-23

Standards EN-13060
Motor-operated closure
with triple-protection, guarantees FEATURES ADVANTAGES
a total safety, greater ease
of handling and a reliable
self-regulation of the hatch.

Motor-operated closure + ergonomics

+ speed
Instantaneous Vaporizer Instantaneous vaporizer - consumption
outside the chamber allows
higher sterilization speeds and
Standard printer + control
reduces water consumption.

Loading with self-priming pump + practical

Thermal printer
installed on board the machine
to allow complete recording of Graphic display + easier
the sterilization cycle.
Ensures the user greater cycle + process
Latest Software self-control
control and easy archiving.

Multi-language
graphic display Possibility of connection to data logger + archiving
makes it easier for the operator
to select the sterilization cycles,
continuous control over the cycle Provision for connection to demineralizer
+ handy
phases and gives graphic indication and direct dirty water drainage
of the errors committed by
the operator.

Connection to STS-Data Electronic drying in vacuum + safety

logger system
It is possible to store the Double loading tank
data on a PC. + hygiene
and water drainage

Moulded stainless steel

- porous
one-piece chamber
Stainless steel chamber
Made of thick one-piece
moulded steel.
Memory Test System + diagnostics

3-cycles Test + safety

Connection to
Demineralization System Bowie and Dick
Helix Test
Vacuum Test
 The fastest sterilization process
Speedy 6

Fractionated vacuum
With high-performance Double-stage pump

COMPLETE GRAPHIC CYCLE KRONOS B Speedy Pressure

Time

Start End
 KRONOS B Speedy 6
STERILIZABLE PRODUCTS

SOLID INSTRUMENTS

HOLLOW INSTRUMENTS

WRAPPED INSTRUMENTS

POROUS LOADS
 KRONOS B
Speedy
6

Standards EN-13060
 FEATURES ADVANTAGES
Motor-operated closure
with triple-protection, guarantees
a total safety, greater ease
of handling and a reliable
self-regulation of the hatch. Motor-operated closure + ergonomics

Instantaneous vaporizer + speed

- consumption

Instantaneous Vaporizer Standard printer + control

outside the chamber allows
higher sterilization speeds and
reduces water consumption Loading with self-priming pump + practical

Graphic display + easier

Thermal printer
installed on board the machine to Latest Software + aprocess
allow complete recording of the self-control
sterilization cycle.
Ensures the user greater cycle
control and easy archiving. Possibility of connection to data logger + archiving

Multi-language Electronic drying in vacuum + safety

graphic display
makes it easier for the operator
to select the sterilization cycles,
continuous control over the
cycle phases and gives graphic Double loading tank and + hygiene
indication of the errors water drainage
committed by the operator.
Aluminium chamber + rapidity

Connection to STS-Data
logger system
It is possible to store the Memory Test System + diagnostics
data on a PC.

3-cycles Test + safety

Bowie and Dick
Helix Test
Thick Aluminium chamber Vacuum Test
for faster sterilization cycle
 18-23 18-23

Pre and Post vacuum

With Double-stage Vacuum Pump

Thermodynamic vacuum
Electronically Controlled

COMPLETE GRAPHIC CYCLE KRONOS S COMPLETE GRAPHIC CYCLE KRONOS N

Pressure
Pressure

Time
Time

Start End
Start End
 KRONOS S 18-23
STERILIZABLE PRODUCTS

SOLID INSTRUMENTS WRAPPED INSTRUMENTS

SMALL POROUS LOADS

KRONOS N 18-23
STERILIZABLE PRODUCTS

SOLID INSTRUMENTS
Kronos S and N

18-23

Standards EN-13060
Motor-operated closure FEATURES ADVANTAGES
with triple-protection, guarantees
a total safety, greater ease
of handling and a reliable
self-regulation of the hatch.
Motor-operated closure + ergonomics

+ speed
Instantaneous Vaporizer Instantaneous vaporizer - consumption
outside the chamber allows
higher sterilization speeds and
Standard printer + control
reduces water consumption.

Loading with self-priming pump + practical

Thermal printer
installed on board the machine
to allow complete recording of Graphic display + easier
the sterilization cycle.
Ensures the user greater cycle + process
Latest Software self-control
control and easy archiving.

Multi-language
graphic display Possibility of connection to data logger + archiving
makes it easier for the operator
to select the sterilization cycles,
continuous control over the Provision for connection to demineralizer
+ handy
cycle phases and gives graphic and direct dirty water drainage
indication of the errors
committed by the operator.
Electronic drying in vacuum
Connection to STS-Data + safety
(kronos S only)
logger system
It is possible to store the
Double loading tank and
data on a PC. + hygiene
water drainage

Moulded one piece stainless

- porous
Stainless steel chamber steel chamber
Made of thick one-piece
moulded steel
Memory Test System + diagnostics

2-cycles Test (Kronos S only) + safety

Connection to
Demineralization System Bowie and Dick
Vacuum Test
 Completely Automatic
18-23 controlled by microprocessor

Thermodynamic vacuum
Electronically Controlled

COMPLETE GRAPHIC CYCLE ENERGY Pressure

Time

Start End
 ENERGY 18-23
STERILIZABLE PRODUCTS

SOLID INSTRUMENTS
Energy
18-23
 FEATURES

Closure system
Easy and practical

Stainless steel chamber

Single piece moulded steel

The closure system

Easy and practical with double safety
LCD display with continuous temperature
and pressure display

Double sensor
for safety on door closure

Double control
of sterilization process

Electronic Transducer
Allowing a precise check of pressure

Two electronic temperature probes

for measuring the temperature inside and outside
INOX chamber the sterilization chamber
Thick one-piece moulded steel

Internal tank with probe

which shows the minimum and maximum
level on the display

Loading of water through a self-priming pump

Sterilization cycles
Completely automatic:
2 sterilization cycles at 121˚
2 sterilization cycles at 134˚
LCD Display
Makes it easier for the operator to select the sterilization cycles,
allows a continuous control over the cycle phases and gives an information
of the errors committed by the operator.
THE PROGRAMS MENU Designed for perfect sterilization of various
materials, thanks to the combination of
Cycles Tables
vacuum, temperature and drying.

Vacuum
Materials and instruments Program Total time*
phases
Delicate hollow** and rustproof hollow (wrapped) 121˚ Hollow wrapped 4 28 minutes
Rustproof hollow (wrapped) 134˚ Hollow wrapped 4 15 minutes
Solid made of rubber and delicate solids (wrapped) 121˚ Solid wrapped 2 28 minutes
Rustproof solid (wrapped) 134˚ Solid wrapped 2 15 minutes
Rustproof solid and hollow (wrapped) 134˚ Prion 4 30 minutes
Delicate, hollow and porous (wrapped 121˚ Porous 4 33 minutes
18-23 Solid rustproof, hollow, and porous (wrapped) 134˚ Porous 4 20 minutes
Solid made of rubber and delicate (unwrapped) 121˚ Rapid 2 22 minutes
Solid rubber (unwrapped) 134˚ Rapid 2 9 minutes
Hollow made of rubber and stainless steel (unwrapped) 134˚ Open hollow 4 9 minutes
Test Cycle for Helix and Bowie & Dick 134˚ Helix/B&D Test 4 7.5 minutes
Test Cycle for vacuum <40˚ Vacuum Test 1 15 minutes
* Including drying phase, excluding preheating. The preheating may vary from 20 to 25 minutes depending on the load
** Type A and B hollow instruments, in accordance with EN 13060
*** For Kronos B23 the total time must be increased by 5 minutes

Vacuum
Materials and instruments Program Total time*
phases
Delicate hollow** and rustproof hollow (wrapped) 121˚ Hollow wrapped 4 28 minutes
Rustproof hollow (wrapped) 134˚ Hollow wrapped 4 15 minutes
Delicate hollow and rustproof hollow (unwrapped) 121˚ Open hollow 4 20 minutes
Hollow rubber and rustproof hollow (unwrapped) 134˚ Open hollow 4 7 minutes
Rustproof solid and hollow (wrapped) 134˚ Prion 4 30 minutes
Speedy Delicate, hollow and porous (wrapped 121˚ Porous 4 33 minutes
Solid rustproof, hollow, and porous (wrapped) 134˚ Porous 4 20 minutes
Solid made of rubber and delicate (unwrapped) 121˚ Solid open 2 20 minutes
Solid rustproof (unwrapped) 134˚ Solid open 2 7 minutes
Solid rustproof (wrapped) 134˚ Solid wrapped 2 15 minutes
Test Cycle for Helix and Bowie & Dick 134˚ Helix/B&D Test 4 6 minutes
Test Cycle for vacuum <40˚ Vacuum Test 1 15 minutes
* Including drying phase, excluding preheating. The preheating may vary from 7 to 10 minutes depending on the load
** Type A and B hollow instruments, in accordance with EN 13060
 Vacuum
Materials and instruments Program Total time*
phases
Delicate hollow** and rustproof hollow (wrapped) 121° Hollow wrapped 2 30 minutes
Rustproof hollow (wrapped) 134° Hollow wrapped 2 22 minutes
Solid made of rubber and delicate solids (wrapped) 121° Solid wrapped 2 28 minutes
Rustproof solid (wrapped) 134° Solid wrapped 2 15 minutes
Rustproof solid and hollow (wrapped) 134° Prion 2 35 minutes
18-23 Delicate, hollow and porous (wrapped) 121° Porous 2 33 minutes
Solid rustproof, hollow, and porous loaded small(wrapped) 134° Porous 2 20 minutes
Solid made of rubber and delicate (unwrapped) 121° Rapid 2 33 minutes
Solid rrustproof (not wrapped) 134° Rapid 2 10 minutes
Hollow made of rubber and rustproof (unwrapped) 134° Open hollow 2 11 minutes
Test Cycle for Helix and Bowie & Dick 134° Helix/B&D Test 2 7.5 minutes
Test Cycle for vacuum <40° Vacuum Test 1 15 minutes
* Including drying phase, excluding preheating. The preheating may vary from 20 to 25 minutes depending on the load
** Type A and B hollow instruments, in accordance with EN 13060
*** For Kronos S23 the total time must be increased by 5 minutes

Materials and instruments Program Total time*

Solid made of rubber and delicate solid (with prolonged drying) 121° Solid open 33 minutes
Solid made of rubber and solid metal (with prolonged drying) 134° Solid open 21 minutes
18-23 Solid stainless steel and metal instruments 134° Prion 35 minutes
Solid made of rubber and delicate solid (with brief drying) 121° Rapid 23 minutes
Solid made of rubber and solid metal (with brief drying) 134° Rapid 11 minutes
* Including drying phase, excluding preheating. The preheating may vary from 20 to 25 minutes depending on the load
*** For Kronos N23 the total time must be increased by 5 minutes

Materials and instruments Program Total time*

Solid made of rubber and delicate solid (wrapped drying) 121° Long Dry 33 minutes
Solid made of rubber and solid metal (unwrapped) 121° Short Dry 27 minutes
18-23
Solid stainless steel and metal instruments (wrapped) 134° Long Dry 21 minutes
Solid made of rubber and delicate solid (unwrapped) 134° Short Dry 26 minutes
* Including drying phase, excluding preheating. The preheating may vary from 20 to 25 minutes depending on the load
*** For Energy 23 the total time must be increased by 5 minutes
Technical features
Kronos B Kronos B Kronos S Kronos N Energy
18-23 Speedy 18-23 18-23 18-23
Motor-operated closure Mechanical

Door lock safety Electric Electric Electric Electric Mechanical

Type of Vacuum Fractionated Fractionated Pre and Post vacuum Thermodynamics Thermodynamics

Instantaneous Vaporizer
Bowie & Dick/ Bowie & Dick/ Bowie & Dick/
Test Programs Helix/Vacuum Helix/Vacuum Helix

Onboard Printer

Display Graphic Graphic Graphic Graphic Digital

M.T.S. Memory System Test

Connection to PC

Connection to demineralizer

Night Cycle

Internal water tanks (loading and unloading) 2 2 2 2 1

Chamber volume in litres 18 23 6 18 23 18 23 18 23

No. of Cycles with water loading (indicative) 8 6 18 10 8 10 8 16 12

Wrapped sterilizable weight in kg 3 4,5 1 3 4,5

Unwrapped sterilizable weight in kg 4 6 1,8 4 6 4 6 4 6

Porous material in kg 1 1,5 0,5 0,5 1

Empty machine weight in kg 56 60 40 45 50 43 48 40 45

Outer measurement:
Depth mm 610 695 610 610 695 610 695 610 695
Width mm 505 505 445 445 445 445 445 445 445
Height mm 400 400 345 400 400 400 400 400 400

Supply voltage 220-240 V

Mains frequency 50-60 Hz

Rated power 2400 W 2500 W 2400 W 2400 W 1800 W

standard not present Newmed reserves the right to make modifications without prior warning

Standard Trays Quantity Dimensions in mm

1 150 x 240 x 19
6 liters autoclaves
2 115 x 240 x 19

18 liters autoclaves 4 185 x 285 x 17

23 liters autoclaves 4 185 x 440 x 17

NUBYRA 6
Completely automatic cycle
controlled by microprocessor

Thermodynamic vacuum
Electronically Controlled

Chamber in aluminium

LCD Display
Makes it easier for the operator to select the sterilization
cycles, allows a continuous control over the cycle phases
and gives an information of the errors committed
by the operator.

Features
Closure system: easy and practical
LCD display: with continuous control of temperature and pressure
Double sensor: for safety on door closure
Double control: of sterilization process
Electronic transducer: allowing a precise check of pressure
Two electronic temperature probes,
one inside and one outside the sterilization chamber
Sterilization cycles: completely automatic
2 sterilization cycles at 121˚
2 sterilization cycles at 134˚
Vacum type: thermodynamic
Water filling: manual
Night cycle: yes
Chamber capacity: 6 liters
Sterilizable weight: 1 Kg
Autoclave weight: 30 Kg
Dimensions: 480 mm depth
445 mm width
350 mm height
Voltage: 230 V 50/60 Hz
Rated power: 1350 W
Trays: 3 1x(150x240x19)
2x(115x240x19)
ACCESSORIES and Optionals

Perfect Water Aquamed Osmo2 STS-Datalogger USB

Electrical water distiller. Water demineralizer with visual Osmotic system with high Device for data collection with direct
control of conductibility, purification capacity. recording on USB key, complete
with intake pistol (optional). It is optimum for the use with with software for data evaluation
the autoclave, with 16 Lt. tank (developed for s.o. Windows).
(optional).

Tests for Autoclaves Reversible Trayholders Ultrasonic Tanks Sealing machine Termoseal:
Wide range of tests: To make autoclave load optimum Wide range of ultrasonic tanks Ergonomic design and fast
HELIX TEST to check sterilization It can be used both for standard from 2.5 to 9 litres. sealing times.
inside hollow instruments trays and cassettes for implants. All the models are of electronic Concealed roll-holder
BOWIE & DICK TEST: to check Available for 18 and 23 Lt. type with automatic control Stretched 12mm seal
sterilization in porous materials autoclaves. of frequency. Dimensions:
CHEMICAL INDICATORS: to check Equipped with stainless steel tanks. 480x198x385 mm (LXHXD)
each sterilization cycle Many accessories are available. Voltage: 230V - 50/60 Hz
SPORES: for the biological control Power adsorbed 100 W
of sterilization. Weight: 9 kg
IT IS JUST A QUESTION OF TIME…
Your time…

Directives applicable
Reference Standards of Autoclaves
Directive: Medical Devices 93/42/EEC
Directive: Pressure Vessels 97/23/EEC
Directive: Small steam sterilizers EN13060 (excluding Energy and Nubyra)
Directive: Electromagnetic Compatibility CEI EN 61326-1
Directive: Safety instructions for laboratory apparatus CEI EN 61010-1
Directive: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials CEI EN 61010-2-40
 CATALOGO GENERALE INGLESE Rev. 1 26/09/2008
Via Tarantelli, 9 - 42021 Barco di Bibbiano - Reggio Emilia - ITALY
Tel. +39 0522 875166 Fax. +39 0522 243096
[email protected]
www.newmedsrl.it