Professional Documents
Culture Documents
Technical Lesson 8
Technical Lesson 8
Lesson Overview
This lesson provides the trainees the necessary skill in scanning, printing, CD burning using Nero and
lay-outing using Adobe Photoshop.
Lesson Objectives
3. Click Scan.
4. When the scan is finished, place an item on the scanner glass and then click Scan to scan another
picture, or click Done.
5. The software saves the scan to a subfolder in the My Scans folder located within the My
Documents folder. The subfolder is named for the current year and month. The scanned image
is also sent to HP Image Zone by default.
Scanning
Scan documents
1. Place the original face down on the scanner glass, as indicated by the reference mark.
3. Under the What are you scanning? heading, click Document, and then select one of the following
options:
a. Color – This is the default setting.
b. Grayscale – converts any colored original to grayscale, and creates a smaller file size
than the Color option.
c. Black & White – the best setting for scanning a black and white graphic, but not
suitable for color or grayscale originals if you want to preserve detail.
4. Click Scan.
5. When you are finished with that page, place the next page on the glass and click Scan to scan
another document or page.
6. When you are finished with all pages, click Done. After you click Done, the software sends the
scanned file to the specified location.
Scanning
Scan multiple pictures with one scan
You can scan multiple pictures at the same time from the scanner glass. Arrange the pictures
that you want to scan on the HP scanning device glass. For the best results, leave at least 0.25
inches (6 mm) of space between the edges of the pictures.
Scanning
Scan negatives
To scan 35 mm negatives, use the negative strip holder. The negative strip holder
is stored within the slide holder that is part of the built-in transparent materials adapter
• Open the scanner lid and remove the negative strip holder from the slide holder.
2. Slide a negative strip into the negative strip holder so that the shiny side of the negative faces you.
3. Insert the negative strip holder back into the slide holder, and then close the scanner lid.
4. Press the Scan Film button on the scanner, or click Scan Film in the HP Solution Center.
5. Select Picture.
6. Select Scan negatives using the Transparent Materials Adapter (TMA). If you want to preview the scanned
image, select the Show Preview check box on the screen, or begin the scan from the HP Solution Center.
7. Click Scan.
8. Follow the instructions on the screen to finish scanning. The scan is sent to the destination selected in the HP
Scanning dialog box.
9. When finished, remove the negative strip. Place the negative strip holder back into the scanner lid for convenient
storage.
Printing
Loading Sheets of Paper
1. Open the paper support, and then slide out the extension.
3. Position the left edge guide so that the distance between the two edges guides is slightly wider
than the width of your paper.
4. Fan a stack of paper, and then tap it on a flat surface to even the edges.
5. Load the paper with the printable side up so it is against the right edge guide, and slide it into the
sheet feeder. Then slide the left edge guide against the left edge of the paper.
Printing
Printing Text
3. Click the Main tab, then make the Quality Option setting.
See the following section for details on the Quality
Option settings.
Printing Photos
1. Retrieve images from a scanner, digital camera, or memory card and send the files directly to the
application you want to use
3. View the various applications you can use as project icons in the launch area
6. Retouch images
Printing
Printing Photos
2. For Windows:
Click Start, point to All Programs
(Windows XP) point to EPSON Creativity
Suite, then click EPSON Easy Photo Print.
Printing
Printing on CD/DVD
2. For Windows:
Click Start, point to All Programs, point to
EPSON Print CD, then click EPSON Print
CD
Printing
Printing on CD/DVD
4. With the CD/DVD loaded printable side up, gently insert the
CD/DVD tray along the base of the CD/DVD guide until
the marks on the CD/DVD tray and the CD/DVD guide
match each other.
5. Click Print on the File menu. The Print dialog box appears.
1. Start Nero StartSmart, select the ‘Data’ category and click on ‘Make Data Disc’.
Burning using NERO
Make Data Disc
Nero Express 6 starts automatically and the compilation window for data opens
2.. In the window, click on the ‘Add’ button to open the window for selecting files.
Burning using NERO
Make Data Disc
3. Select the desired files and click on the ‘Add’ button to transfer them to the compilation.
4. Once you have finished adding files, click on the ‘Finished’ button to close the window
and return to the Nero Express 6 screen.
Burning using NERO
Make Data Disc
5. All the files you have added appear in the compilation window. Click on the 'Next' button
to advance to the burning window.
Burning using NERO
Make Data Disc
1. Start Nero StartSmart, select the ‘Audio’ category and click on ‘Make Audio CD’.
Burning using NERO
Make Audio Disc
Nero Express 6 starts automatically and the compilation window for audio
discs opens.
2. In the window, click on the ‘Add’ button to open the window for selecting files.
Burning using NERO
Make Audio Disc
3. Select the desired files and click on the ‘Add’ button to transfer them to the
compilation.
Burning using NERO
Make Audio Disc
4. Once you have finished adding files, click on the ‘Finished’ button to close the window and
return to the Nero Express 6 screen.
Burning using NERO
Make Audio Disc
5. All the files you have added appear in the compilation window. Click on the 'Next' button
to advance to the burning window.
Burning using NERO
Make Audio Disc
The burning process starts and you will see information about the current status.
Burning using NERO
Make Audio Disc
8. Click on the 'Next' button to advance to the selection window.
1. Start Nero StartSmart, select the ‘Copy and Backup’ category and click on ‘Copy Disc’.
Burning using NERO
Copy disc
Nero Express 6 starts automatically and the selection window for the drives and the final
burning settings opens up.
2. As the source drive, you should select the drive containing the disc to be copied.
3. As the destination drive, select the recorder you want to use to copy the disc.
4. In the ‘Quick Copy’ section, you can determine how the disc is to be copied.
If this option is selected, the copy is made directly, i.e. from drive to drive. This
method is quick but is susceptible to errors.
If this option is not selected, an image file for the original disc is first of all
created on the hard drive and the image file is then burned. This method takes
longer and the size of the image file, and therefore the required hard disc
space, corresponds to the quantity of data to be copied from the original disc.
Burning using NERO
Copy disc
Burning using NERO
Copy disc
5. Once you have made all your settings, click on the ‘Burn’ button to start burning the disc.
Burning using NERO
Copy disc
The burning process starts and you will see information about the current
status.
Burning using NERO
Copy disc
Truly Plug & Play and hot swapping capable – just plug in the other
end of the cable wire to the card reader and the other end to any of the
USB port; automatically windows will detect the newly inserted device
and install the driver. It is then ready for use.
Using Card Reader
To view the contents of the memory card; insert the card to a
particular slot in the card reader where it will fit.
You can also check the my computer window to verify the card drives.
Using Card Reader
After use: before pulling out the card from the card reader make sure to
do the following:
1. Click on my computer icon at the desktop
2. Right click on the specific drive of the card
3. Then click on eject
4. Then you may now take out the card from the card reader
Using Card Reader
If you are done using the card reader and wish to detach it from the
computer be sure to do the following:
1. Right click on the green arrow icon at the system tray
A message will come out stating that it is now safe to remove hardware.
You may now unplug the card reader from the computer.