Brochure Borri E2001 Compact OMG60323revA 01-22
Brochure Borri E2001 Compact OMG60323revA 01-22
Brochure Borri E2001 Compact OMG60323revA 01-22
AC UPS
Industrial 1-Ph UPS
From 5 to 30 kVA
Industrial Power
● Widely configurable.
Battery
DC voltage 110 Vdc (90÷160 Vdc range) / 220 Vdc (180÷300 Vdc range)
Floating: 2.27 (VRLA), 2.2÷2.3 (VLA), 1.4÷1.5 (Ni-Cd) V/cell adjustable
Input voltage Boost: 2.4÷2.45 (VLA), 1.5÷1.65 (Ni-Cd) V/cell adjustable
Equalizing: up to 2.35 (VRLA), up to 2.7 (VLA), up to 1.7 (Ni-Cd) V/cell adjustable
Battery technologies Maintenance free Lead Acid and Ni-Cd / Vented Lead Acid and Ni-Cd, Li-Ion battery compatible
Output
Nominal voltage 110/115/120 or 220/230/240 Vac 1-phase
Frequency 50/60 Hz (selectable), ±0.001 Hz free running, ±2 Hz synchronized with mains
Voltage regulation ±1% static; ±5% dynamic (80% load change), <40 ms recovery time
Overload capacity 125% for 10 min; 150% for 1 min; 200% for 100 ms
Harmonic Distortion THDv <2% linear load; <5% non-linear load
System
Dimensions WxDxH (mm) 600x640x1900 800x800x2100
Cooling Forced ventilation (optional redundant fans)
Colour RAL 7035 (optional other colours)
Protection degree IP 20 as per IEC 60529 (optional up to IP 42)
Operating temperature -10° C to 40° C (up to 55° C with de-rating) / Storage: -20° C to 70° C
Altitude < 1000 m (up to 2000 m de-rating according to EN 62040-3)
Audible noise at 1
<65
meter (dBA)
User Interface
Front panel Graphic display, mimic LED panel, function keys, local EPO
Connectivity Included: USB, alarm relay card, terminal block for auxiliary contacts
Standards Quality assurance, environment, health and safety: ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007;
Safety: IEC EN 62040-1;
EMC: IEC EN 62040-2;
Environmental aspects: IEC EN 62040-4;
Test and performance: IEC EN 62040-3 VFI-SS-111;
Marking: CE; Optional: CSA/UL Certified
E2001 Compact schematic
Standard features
● Rugged 6-pulse thyristor ● Electronic current limit.
bridge with isolation transformer.
● 20 programmable alarm and status
● 4 level battery charging including LEDs.
optional manual charge.
● Built-in inverter transformer.
● Active parallel configuration via
CAN bus connection. ● Communication ports and potential
free contacts.
● Standard configuration for
cost-effective, short lead time ● Bottom cable entry.
solutions.
Options
Borri’s engineer can help you to design Alarms and measurement Communication interfaces
the best solution for your application
with a wide range of options, some of ● Analogue meters. ● RS-232/485 interface.
which are: ● Additional LED alarm indicators. ● SNMP adapter for Web
browser-based monitoring.
Additional relay board NO/NC
System
●
contacts. ● Modbus protocol on RS-485 or TCP/IP.
● Redundant/Parallel Load Sharing
● Low battery electrolyte level alarm. ● IEC 61850 protocol.
Configuration.
● Temperature alarm. ● Protocol converters Profibus DP.
● Redundant/Parallel with Common
battery bus. ● Battery circuit failure alarm.
Mechanical
● AC & DC distribution. ● Ground fault alarm.
● Protection up to IP 42.
● AC and DC earth-fault monitoring. ● High rate interlock.
● Vermin proof.
● 12-pulse rectifier with isolation ● Fan failure alarm.
transformer. ● Increased structure/panel
thickness up to 3 mm.
● Battery circuit breaker in rectifier.
● Special cable marking (both ends).
● Battery circuit protection box
(MCCB/fuse) also EEx-d. ● 100% redundant ventilation.
Maintenance
Preventive maintenance guarantees
uninterrupted operations and
optimized system efficiency.
Analytical tests
Borri undertakes a series of analytical
tests in order to guarantee higher
efficiency and continuity to your
system operation.
Who we are
Borri has been developing and
building uninterruptible power
systems since 1932 and is a global
provider of power electronics systems
and solutions for harsh industrial
and demanding critical power
requirements.
Borri is a brand of Legrand, a publicly
traded company and a global specialist
in electrical and digital infrastructures,
offering high-value-added products
and solutions for commercial,
residential and industrial buildings.
Borri’s R&D vast expertise in all facets
of firmware, power electronics and
OMG60323revA - 01-2022 - Due to our policy of continuous development, data in this document is subject to change without notice and becomes contractual only after written confirmation
mechanical design provides innovative
solutions for tomorrows problems
in Industrial and Critical Power
applications.
The company prides itself on its first-
class service and superior engineering
disciplines. To ensure sustained quality,
Borri manages all its processes in
house from feed studies to design,
production and after sales service
technology.
Based in Bibbiena, Italy with over
20,000 m² production area, Borri
operates across all five continents with
subsidiaries in USA, Canada, Germany,
UAE, India and Malaysia.
It has also established a strong
distributor network, able to deliver on
site support and technical guidance
indicative of our own capabilities.
Borri S.p.A.
Via 8 Marzo, 2 · 52011 Bibbiena (AR) Italy For more information about Borri and
Tel. +39 0575 5351 · [email protected] its network please visit www.borri.it