Application of Newton's Laws
Application of Newton's Laws
I. Introduction
In this chapter, we will be examining how to apply the laws of motion in problem-solving. We will be
II. Objectives
1. Apply problem-solving techniques to solve for quantities in more complex systems of forces
2.
3. Solve more complex equilibrium and complex acceleration problems
We follow here the basics of problem solving but we emphasize specific strategies that are useful in
applying
se steps to find a solution. These
techniques also reinforce concepts that are useful in many other areas of physics. Many problem-solving
strategies are stated outright in the worked examples, so the following techniques should reinforce skills
you have already begun to develop.
in this section. These serve also to illustrate some further subtleties of physics and to help build problem-
solving skills. We look first a
A particle in equilibrium is one for which the external forces are balanced. Static equilibrium involves
objects at rest, and dynamic equilibrium involves objects in motion without acceleration or constant
velocity. We now make use of the knowledge attained in
types of forces and the use of free-body diagrams, to solve additional problems in particle equilibrium.
You must use , for any problem that involves forces acting on a body in equilibrium
that is, either at rest or moving with constant velocity.
In components,
Particles in Acceleration
equation:
In components,
The second law is a description of how a body responds mechanically to its environment. The influence of
the environment is the net force, acceleration, and the strength of the response
is inversely proportional to the mass. The larger the mass of an object, the smaller its response (its
acceleration) to the influence of the environment (a given net force).
Friction
Friction is a force that is around us all the time that opposes relative motion between surfaces in contact
but also allows us to move. One of the simpler characteristics of friction is that it is parallel to the contact
surface between surfaces and always in a direction that opposes motion or attempted motion of the
systems relative to each other. If two surfaces are in contact and moving relative to one another, then the
friction between them is called kinetic friction. For example, friction slows a hockey puck sliding on ice.
But when objects are stationary, static friction can act between them; the static friction is usually greater
than the kinetic friction between the surfaces.
If two systems are in contact and moving relative to one another, then
the friction between them is called kinetic friction.
Imagine, for example, trying to slide a heavy crate across a concrete floor you may push harder and
harder on the crate and not move it at all. This means that the static friction responds to what you do it
increases to be equal to and in the opposite direction of your push. But if you finally push hard enough,
the crate seems to slip suddenly and starts to move. Once in motion it is easier to keep it in motion than
it was to get it started, indicating that the kinetic friction force is less than the static friction force. If you
add mass to the crate, say by placing a box on top of it, you need to push even harder to get it started and
also to keep it moving. Furthermore, if you oiled the concrete you would find it to be easier to get the
crate started and keep it going.
Figure 3.1 is a crude pictorial representation of how friction occurs at the interface between two objects.
Close-up inspection of these surfaces shows them to be rough. So when you push to get an object moving
(in this case, a crate), you must raise the object until it can skip along with just the tips of the surface
hitting, break off the points, or do both. A considerable force can be resisted by friction with no apparent
motion. The harder the surfaces are pushed together (such as if another box is placed on the crate), the
more force is needed to move them. Part of the friction is due to adhesive forces between the surface
molecules of the two objects, which explain the dependence of friction on the nature of the substances.
Adhesion varies with substances in contact and is a complicated aspect of surface physics. Once an object
is moving, there are fewer points of contact (fewer molecules adhering), so less force is required to keep
the object moving. At small but nonzero speeds, friction is nearly independent of speed.
The magnitude of the frictional force has two forms: one for static situations (static friction), the other for
when there is motion (kinetic friction). When there is no motion between the objects, the magnitude of
static friction is
where s is the coefficient of static friction and n is the magnitude of the normal force.
The symbol implies that static friction can have a minimum and a maximum value of Static friction
is a responsive force that increases to be equal and opposite to whatever force is exerted, up to its
maximum limit. Once the applied force exceeds fs(max), the object will move. Thus
Coefficient of friction is a unit less quantity with a magnitude usually between 0 and 1.0. The coefficient of
the friction depends on the two surfaces that are in contact.
Watch:
Watch:
IV. Problems
1. Find the tension in each cord if the weight of the suspended object is 100 N.
Solution:
2. A stockroom worker pushes a box with mass 16.8 kg on a horizontal surface with a constant speed
of 3.50 m/s. The coefficient of kinetic friction between the box and the surface is 0.20. What
horizontal force must the worker apply to maintain the motion?
Solution:
3. A man pushes on a piano with mass 180 kg; it slides at constant velocity down a ramp that is
magnitude of the force applied by the man if he pushes parallel to the incline.
Solution:
4. A light rope is attached to a block with mass 4.00 kg that rests on a frictionless, horizontal surface.
The horizontal rope passes over a frictionless, massless pulley, and a block with mass m is
suspended from the other end. When the blocks are released, the tension in the rope is 10.0 N.
a. Draw two free-body diagrams, one for the 4.00-kg block and one for the block with mass
m.
b. What is the acceleration of either block?
c. Find the mass m of the hanging block.
Solution:
5. A 20.0-kg crate is at rest on a floor as shown below. The coefficient of static friction between the
crate and floor is 0.700 and the coefficient of kinetic friction is 0.600. A horizontal force P is
applied to the crate. Find the force of friction and the acceleration if
a. P =20.0N.
b. P = 180.0 N.
Solution:
The free-body diagram of the crate is shown in Figure 3.2 first law in the
horizontal and vertical directions (object at rest), including the friction force in opposition to the
direction of motion of the box.
Figure 3. 2 (a) A crate on a horizontal surface is pushed with a force. (b) The forces on the crate.
To identify which type of friction is acting we first identify the maximum force of static friction,
Thus, if P is less than 137 N, the force of static friction keeps the crate stationary. The force P for (a)
is less than fsmax, Thus, for (a)
Also, there is no vertical motion, thus, the first law at the y component gives,
Thus,
For (b), since the applied force P is greater than the maximum force of static friction (137 N), the
applied force so the crate can no longer remain at rest, . Once the
crate is in motion, kinetic friction acts. Then,
V. Summary
Some problems contain multiple force vectors acting in different directions on an object. Be sure
to draw diagrams, resolve all force vectors into horizontal and vertical components, and draw a
free-body diagram. Always analyze the direction in which an object accelerates so that you can
determine whether Fnet = ma or Fnet = 0.
The normal force on an object is not always equal in magnitude to the weight of the object. If an
object is accelerating vertically, the normal force is less than or greater than the weight of the
object. Also, if the object is on an inclined plane, the normal force is always less than the full
weight of the object.
Some problems contain several physical quantities, such as forces, acceleration, velocity, or
position. You can apply concepts from kinematics and dynamics to solve these problems.
Friction is a contact force that opposes the motion or attempted motion between two systems.
Simple friction is proportional to the normal force N supporting the two systems.
The magnitude of static friction force between two materials stationary relative to each other is
determined using the coefficient of static friction, which depends on both materials.
The kinetic friction force between two materials moving relative to each other is determined using
the coefficient of kinetic friction, which also depends on both materials and is always less than
the coefficient of static friction.