Professional Documents
Culture Documents
AF Range Brochure
AF Range Brochure
Innovation As the world leader in marine coatings, International Paint has a long and successful history of innovation in antifouling and foul release technology and we remain fully committed to research programmes designed to meet the product performance and regulatory requirements of todays vessel operator. As a result of pioneering the concept of Self Polishing Copolymer (SPC) antifoulings in the early 1970s, our overall contribution to the fuel efficiency of the global fleet has been significant. Innovations include: Intersmooth SPC - the first SPC antifoulings. Intersleek Interswift - the first non stick, foul release systems. - the first hybrid SPC systems.
The Environment In the 1980s a number of countries restricted the use of TBT containing antifoulings on smaller vessels following increased environmental concern over the effects of TBT on non target marine organisms, particularly in areas of low water exchange such as coastal estuaries and marinas. Throughout the 1990s the International Maritime Organisations (IMO) Marine Environmental Protection Committee (MEPC) discussed further legislation against the use of TBT based antifoulings resulting in a TBT application ban from 1st January 2003 with a complete prohibition of TBT on ships hulls on 1st January 2008.
Against this background of regulatory activity, International Paint has continued to invest heavily in developing effective TBT free and foul release coating technologies.
SPC
Performance Performance
FR:SS
FR:FC
SPC/CDP
CDP
Investment Cost
Vessel Speed
CDP
SPC/CDP
Hybrid SPC/CDP
FR:SS
FR:FC
SPC
TBT Free Self Polishing Technologies: Key Features (i) Self Polishing Copolymer (SPC): - Highest levels of fouling control. - Controlled, continuous biocide release over extended (up to 60 months ) in service periods. - Controlled polishing rate. - Self smoothing. - Thin leached layers; typically less than 25m (1 mil).
(ii) Hybrid SPC/CDP - Combining SPC and CDP technology. - Controlled polishing rate and biocide release over extended in service periods (up to 60 months on flats). - Reduced leached layer thickness. - Surface tolerant. - Good mechanical properties. - High volume solids (Low VOC ).
w
0.1 mm
(i)
Intersmooth SPC: After in service period. Scanning Electron Microscope cross section.
(ii) Interswift 655: Hybrid SPC/CDP, after in service period. Scanning Electron Microscope cross section.
(iii) Controlled Depletion Polymer (CDP) - Exponential biocide release rate, gradually slowing over the in service period, typically giving a maximum 36 months lifetime. - Leached layers can be large. - Surface tolerant. - High volume solids (Low VOC ).
Foul Release Technologies: Key Features - Biocides are not used to control fouling. - Ultra smooth, slippery, easy clean surface to which fouling organisms have difficulty attaching. - Extended in service periods (up to 60 months ) are achievable. - Low surface energy (non stick). - Chemically durable. - Excellent colour retention.
0.1 mm
(iii) Interspeed 340: CDP, after in service period. Scanning Electron Microscope cross section.
Depending on in service conditions and specification applied. In comparison to CDP technology. VOC = Volatile Organic Compounds.
Intersleek Foul Release Coating Systems Intersleek is a revolutionary coatings technology which controls fouling without the use of biocides and therefore provides freedom from biocide legislation. Intersleeks ultra smooth, slippery and non stick surface allows control of fuel efficiency, speed and maintenance costs since fouling organisms are typically unable to attach, or have difficulty settling onto the surface. Those organisms which do attach, normally only adhere weakly and can usually be easily removed either by self cleaning in service, careful underwater cleaning or by simple low pressure water washing in the drydock. Intersleek is also chemically durable. There is no film degradation, polishing or other chemical change, so extended (up to 60 months ) drydocking intervals are possible.
Intersleek 700: New application. Regina Maersk, A.P. Mller.
The smoothness of the Intersleek System compared to that of a typical (biocide containing) Self Polishing Copolymer (SPC) antifouling is shown below.
Intersleek 425 A silicone elastomer, foul release coating specifically designed for high speed (minimum 30 knot) vessels such as fast ferries.
Intersleek
12 6 0 -6 -12 10 m m m m m m 2.92mm 200 p/mm z 2.92mm; 400 p/mm y x 0o
Intersleek 700 A silicone elastomer, foul release coating specifically designed for high activity, deep sea scheduled ships operating at speeds between 15 to 30 knots.
Intersleek for Propellers The Intersleek system can be applied to propellers to prevent fouling
Intersmooth SPC TBT Free Self Polishing Copolymer (SPC) Systems Intersmooth SPC coatings are proven, patented, TBT free copper acrylate antifoulings offering excellent fouling control for extended (up to 60 months ) in service periods.
On immersion, Intersmooth SPC antifoulings react with the ions in seawater to produce a thin soluble layer on the surface of the coating. This layer polishes at a predetermined rate, consistently exposing fresh antifouling and maintaining a continuous, controlled release of biocides.
The self polishing copolymer characteristics of Intersmooth SPC technology result from a controlled hydrolysis mechanism which mirrors TBT SPC antifouling action. The release of biocides is sustained throughout the coatings lifetime by chemical control of the leached layer size and composition.
Intersmooth SPC technology has a proven track record on over 1500 vessels worldwide. As confirmed at drydock outturns, equivalent performance levels are achieved in service for vessels coated with Intersmooth SPC antifoulings as for those vessels coated with premium grade TBT SPC products.
Intersmooth 460 SPC new application. P&O Nedlloyd Kobe, P&O Nedlloyd.
Intersmooth 460 & 465 SPC Dataplan Drydock Outturns: Relative Antifouling Performance
Intersmooth SPC TBT SPC
High performance, TBT free, Self Polishing Copolymer (SPC) antifouling systems with patented copper acrylate technology. Specifically designed to meet the performance demands of the deep
Relative Performance
1.1 1 0.9 0.8 0.7 0.6 0.5 0-12 13-18 19-24 25-30 31-36 37-42 43-60 Months In Service
sea operator. v Expected Dataplan Satisfactory Performance Ratings: 90% in General Trading.
Intersmooth 360 & 365 SPC High performance, TBT free, Self Polishing Copolymer (SPC) antifouling systems with patented copper acrylate technology. Specifically designed to meet the performance demands of the coastal operator. v Expected Dataplan Satisfactory Performance Ratings: 90% in General Trading.
v The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance, are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated. Depending on in service conditions and specification applied.
Interswift Hybrid SPC/CDP Systems This new, patented TBT free antifouling type is a blend of copper acrylate SPC technology with the rosin based self polishing CDP technology. By carefully combining these two technologies to form a hybrid, it is possible to produce an antifouling which has the CDP benefits of surface tolerance, high volume solids and an attractive cost base, together with the patented copper acrylate SPC attributes of polishing rate control, reduced leached layer size and control of biocide release.
Interspeed Controlled Depletion Polymer (CDP) Systems TBT free, Controlled Depletion Polymer antifoulings rely on a physical dissolution of the paint film to provide the self polishing action. These antifoulings are often referred to as ablative or eroding and rely on the presence of rosin in the coating to provide the physical dissolution at the surface. For additional film toughness and durability, reinforcing resins are also used.
Interswift 655: New application: Ulsan Spirit, TeeKay Shipping (Canada) Ltd.
Interswift 655 Patented, hybrid, TBT free, self polishing antifouling system incorporating unique copper acrylate SPC technology. v Expected Dataplan Satisfactory Performance Rating: 80% in General Trading.
Interspeed 340 and 640+ TBT free Controlled Depletion Polymer (CDP) self polishing antifouling systems. v Expected Dataplan Satisfactory Performance Ratings: 70% in General Trading.
North America only. v The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance, are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated.
November 2004
International Paint Ltd is part of Akzo Nobel, the Netherlands based company serving customers throughout the world with healthcare products, coatings and chemicals. Consolidated sales for 2003 totalled EUR 13 billion. Akzo Nobel currently employs approximately 64,300 people in more than 80 countries.
Argentina Australia Bahrain Belgium Brazil Bulgaria Canada Chile Colombia Croatia Cuba Cyprus Denmark Ecuador Egypt Estonia Fiji Finland
France Germany Greece Hong Kong Iceland India Indonesia Iran Italy Japan Kuwait Latvia Lithuania Luxembourg Malaysia Malta Mexico Netherlands
New Zealand Northern Ireland Norway Pakistan Panama Papua New Guinea Peoples Republic of China Peru Philippines Poland Portugal Qatar Republic of Ireland Romania Russia Saudi Arabia Singapore Slovenia
South Africa South Korea Spain Sri Lanka Sweden Taiwan Thailand Turkey U.S.A. Ukraine United Arab Emirates United Kingdom Uruguay Venezuela Vietnam Western Samoa Yemen
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
www.international-marine.com
SL20/PI4016
Intersleek 700
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
Intersleek 700 after 30 months in service, light slime only after partial washing. Northwest Shearwater, BP Australia Ltd.
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
A silicone elastomer foul release coating.
Features
Ultra smooth, slippery, easy clean surface with potential reductions in applied scheme hull roughness via careful applicationw Biocides are not used to control fouling
Benefits
Control of fuel efficiency and speed Control of maintenance costs
Environmental compliance Freedom from biocide restrictions Control of treatment and disposal costs for wash water/blasting abrasive at subsequent drydockings As a sealer coat for the existing SPC antifouling and as a Linkcoat for the Intersleek 700 system Control of conversion costs to the Intersleek 700 system Flexibility in drydocking schedule (up to 60 months) Surface remains smooth - if not subjected to abrasion or mechanical damage Vessel appearance
Can be applied over existing SPC antifouling systems in good condition (via Intersleek 717 Linkcoat)
Chemically durable
In comparison to typical contact leaching and self polishing antifouling technologies. Depending on in service conditions. Consult International Paint.
Intersleek 700
Vessel Area
Underwater Hull and Boottop
Surface Preparation
Newbuilding: Maintenance and Repair
Major Refurbishment High Pressure Fresh Water Wash Degrease (SSPC-SP1) Grit Blast to Sa2 1/2 (ISO 8501-1) or SSPC-SP10 or Hydroblast to International Paint HB21/2 L Standard For Newbuilding specifications and procedures, please consult International Paint.
Product Data
Colour Volume Solids (ISO Film Thickness Theoretical Spreading Rate
(at stated volume solids and typical film thickness)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:73) Hard Dry (ISO 9117:90) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pot Life @ 25C (77F) Pack Size Thinner (not normally recommended) Cleaner 30 mins 3 hours 4 hours 8 hours Not applicable 75 minutes 10 litre unit (mixed) 2 US gallon unit Do not thin International GTA822 2 hours 5 hours 12 hours 1 week Not applicable 1 hour 10 litre unit (mixed) 2 US gallon unit International GTA007 International GTA822 3 hours 5 hours Not applicable Consult International Paint 24 hours 1 hour 10 litre unit (mixed) 2 1/2 US gallon unit International GTA007 International GTA822
x x xx
After 60 months in service with the initial Intersleek 700 system, a full coat of Intersleek 757 is recommended at 100m (3.9 mils) DFT. Consult International Paint for availablility of other colours. ASTM D-2697 North America. Use Intersleek 731 in North America. Use Intergard 264 in North America. Consult International Paint.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
Intersleek 425
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
A silicone elastomer foul release coating.
Features
Ultra smooth, slippery, easy clean surface with potential reductions in applied scheme hull roughness via careful applicationw Biocides are not used to control fouling
Benefits
Control of fuel efficiency and speed Control of maintenance costs Self-cleaning at high speeds Environmental compliance Freedom from biocide restrictions Control of treatment and disposal costs for wash water/blasting abrasive at subsequent drydockings Control of coating system weight (copper free) Suitable for aluminium hulls (copper free) As a sealer coat for the existing SPC antifouling and as a Linkcoat for the Intersleek 425 system Control of conversion costs to be the Intersleek 425 system Flexibility in drydocking schedule Surface remains smooth if not subjected to abrasion or mechanical damage Effective in all waters Vessel appearance
Can be applied over existing SPC antifouling systems in good condition (via Intersleek 717 Linkcoat)
Chemically durable
In comparison to typical contact leaching and self polishing antifouling technologies. Consult International Paint.
Intersleek 425
Vessel Area
Underwater Hull and Boottop
Surface Preparation
Newbuilding: Maintenance and Repair
Major Refurbishment High Pressure Fresh Water Wash Degrease (SSPC-SP1) Grit Blast to Sa2 1/2 (ISO 8501-1) or SSPC-SP10 or Hydroblast to International Paint HB21/2 L Standard For Newbuilding specifications and procedures, please consult International Paint.
Note: For Aluminium vessels, abrasive blast with aluminium oxide grit to produce a surface profile of 35 - 65m (1.4 - 2.5 mils).
Product Data
Colour Volume Solids (ISO Film Thickness Theoretical Spreading Rate
(at stated volume solids and typical film thickness)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:73) Hard Dry (ISO 9117:90) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pot Life @ 25C (77F) Pack Size Thinner (not normally recommended) Cleaner
x x xx
30 mins 3 hours 4 hours 8 hours Not applicable 75 minutes 10 litre unit (mixed) 2 US gallon unit Do not thin International GTA822
2 hours 5 hours 12 hours 1 week Not applicable 1 hour 10 litre unit (mixed) 2 US gallon unit International GTA007 International GTA822
3 hours 5 hours Not applicable Consult International Paint 24 hours 1 hour 10 litre unit (mixed) 2 1/2 US gallon unit International GTA007 International GTA822
After 60 months in service with the initial Intersleek 425 system, a full coat of Intersleek 425 is recommended at 100m (3.9 mils) DFT. Consult International Paint for availablility of other colours. ASTM D-2697 North America. Use Intersleek 381 in North America. Use Intergard 264 in North America. Consult International Paint.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
High performance, TBT free, Self Polishing Copolymer (SPC) antifouling systems with patented copper acrylate technology. Expected Dataplan Satisfactory Performance Ratings in General Tradingv : Intersmooth 460 SPC 90% Intersmooth 465 SPC 90%
Features
TBT free
Benefits
Freedom from TBT restrictions and associated waste disposal costs Operating efficiency
Highest levels of deep sea fouling control without the use of TBT Patented copper acrylate SPC technology
Safe, simple recoating at the next drydocking Control of maintenance costs Excellent leached layer control Tailored specification design with optimum dry film thickness Control of hull roughness and fuel efficiency Flexibility in drydocking scheduling Proven performance Ideal for Newbuildings Tough, durable films
Controlled polishing rate and continuous biocide release Self smoothing in service Extended in service periods (up to 60 months) Extensive vessel track record Extended exposure periods (Intersmooth 465 SPC) Excellent mechanical properties
Depending on in service conditions and specification applied. The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated.
Vessel Area
Underwater Hull and Boottop
Surface Preparation
Newbuilding: Major Refurbishment, Repair or Upgrading of Approved Systems
Intersmooth 465 SPC must be applied over a recommended anticorrosive system. Consult International Paint. Intersmooth 460 SPC must be applied over a recommended anticorrosive system. Consult International Paint.
Product Data
Colour
Intersmooth 460 SPC For Maintenance & Repair BEA 468 Dark Brown BEA 469 Dark Red 40% Wet - 313m (12.2 mils) Dry - 125m (4.9 mils) 3.2m2/lt at 125m DFT (131 sq.ft/US gallon at 4.9 mils DFT)
Intersmooth 465 SPC For Newbuilding BEA 463 Dark Brown BEA 464 Dark Red BEA 465 Mid Brown 40% Wet - 313m (12.2 mils) Dry - 125m (4.9 mils) 3.2m2/lt at 125m DFT (131 sq.ft/US gallon at 4.9 mils DFT)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:73) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pack Size Thinner (not normally recommended) Cleaner 40 minutes 4 hours
40 minutes 4 hours 6 months 12 hours 20 litres/5 US Gallons International GTA007 International GTA007
28 days
12 hours
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
High performance, TBT free, self polishing copolymer (SPC) antifouling systems with patented copper acrylate technology. Expected Dataplan Satisfactory Performance Ratings in General Tradingv : Intersmooth 360 SPC 90% Intersmooth 365 SPC 90%
Features
TBT free
Benefits
Freedom from TBT restrictions and associated waste disposal costs Operating efficiency
Highest levels of coastal fouling control without the use of TBT Patented copper acrylate SPC technology
Safe, simple recoating at the next drydocking Control of maintenance costs Excellent leached layer control Tailored specification design with optimum dry film thickness
Controlled polishing rate and continuous biocide release even at slow vessel speeds Self smoothing in service Extended in service periods (up to 60 months) Extensive vessel track record Extended exposure periods (Intersmooth 365 SPC) Excellent mechanical properties
Control of hull roughness and fuel efficiency Flexibility in drydocking scheduling Proven performance Ideal for Newbuildings Tough, durable films
Depending on in service conditions and specification applied. The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated.
Vessel Area
Underwater Hull and Boottop
Intersmooth 360 SPC, Bella Cantabria after 12 months in service. Intersmooth 365 SPC must be applied over a recommended anticorrosive system. Consult International Paint. Intersmooth 360 SPC must be applied over a recommended anticorrosive system. Consult International Paint.
Surface Preparation
Newbuilding: Major Refurbishment, Repair or Upgrading of Approved Systems
Product Data
Colour
Intersmooth 360 SPC For Maintenance & Repair BEA 368 Dark Brown BEA 369 Dark Red 40% Wet - 313m (12.2 mils) Dry - 125m (4.9 mils) 3.2m2/lt at 125m DFT (131 sq.ft/US gallon at 4.9 mils DFT)
Intersmooth 365 SPC For Newbuilding BEA 363 Dark Brown BEA 364 Dark Red BEA 365 Mid Brown 40% Wet - 313m (12.2 mils) Dry - 125m (4.9 mils) 3.2m2/lt at 125m DFT (131 sq.ft/US gallon at 4.9 mils DFT)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:73) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pack Size Thinner (not normally recommended) Cleaner 40 minutes 4 hours
28 days
12 hours 20 litres
x ASTM D-2697 North America. Dependent upon scheme applied Consult International Paint.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
655
Product Selector: TBT Free Antifoulings and Foul Release Systems.
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
Interswift 655 after 30 months in service. Brothers, Norstrand Maritime & Trading.
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
Patented, hybrid, TBT free, self polishing antifouling system incorporating unique copper acrylate SPC technology.
Expected Dataplan Satisfactory Performance Rating in General Tradingv : Interswift 655 80%
Features
TBT free
Benefits
Freedom from TBT restrictions and associated waste disposal costs Tailored specification design with optimum dry film thickness
v
Controlled polishing rate and biocide release Contains patented copper acrylate SPC technology Up to 36 months in service periods (vertical sides) Up to 60 months in service periods (flat bottom) Surface tolerant High (58%) volume solids (378g/lt VOC) Good mechanical properties
Freedom to apply over existing antifoulings in good condition Control of solvent emissions
v
Depending on in service conditions and specification applied. In comparison to Controlled Depletion Polymer (CDP) technologies. EPA Method #24 VOC = Volatile Organic Compounds. v The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated. Consult International Paint.
655
Vessel Area
Underwater Hull and Boottop
Interswift 655: New application. Alexander Kosarev, Overseas Commerce & Trading Inc.
Surface Preparation
Newbuilding: Major Refurbishment, Repair or Upgrading of Approved Systems
Interswift 655 must be applied over a recommended anticorrosive system. Consult International Paint. Interswift 655 must be applied over a recommended anticorrosive system. Consult International Paint.
Product Data
Colour Volume Solids (ISO 3233:1998) x Film Thickness Theoretical Spreading Rate
(at stated volume solids and typical film thickness)
BMA 004 Dark Red BMA 008 Brown 58% Wet - 216m (8.5 mils) Dry - 125m (4.9 mils) 4.64m2/lt at 125m DFT (193 sq.ft/US gallon at 4.9mils DFT)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ASTM D-1640, 7.5) or (ISO 1517-1973) Min Overcoating Time (by self) (ASTM D-1640, 7.8) Max Overcoating Time (by self) (ASTM-1640, 7.8) Min Time Before Flooding Pack Size Thinner (not normally required) Cleaner 2 hours 6 hours 3 months 12 hours 20 litre GTA007 GTA007
x ASTM D-2697 North America. Dependent upon scheme applied Consult International Paint.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
455FB
Product Selector: Antifoulings and Foul Release Systems.
Coastal
Bulk Cargo
L Intersmooth 460, 465 and 465HS SPC G Interswift 655 G Interswift 455FB
L Intersmooth 460, 465 and 465HS SPC G Interswift 655 G Interswift 455FB I Interspeed 340 & 640
technology types
# FOUL RELEASE
L SPC G HYBRID SPC/CDP I CDP
Product Description
Patented, hybrid, TBT free, self polishing antifouling system incorporating unique copper acrylate SPC technology. Especially designed for the protection of ships flat bottoms at maintenance and repair drydocking.
Expected Dataplan Satisfactory Performance Rating in General TradingL : Interswift 455FB 75% (Flats only)
Features
Long-term antifouling performance Special biocide combination Contains patented copper acrylate SPC technology Controlled polishing rate and biocide release Surface tolerant High (58%) volume solids (378g/lt VOC) Good mechanical properties
Benefits
60 months in service period (flat bottom), Cost effective antifouling
L
Tailored specification design with optimum dry film thickness Freedom to apply over existing antifoulings in good condition Control of solvent emissions
L
Depending on in service conditions. In comparison to Controlled Depletion Polymer (CDP) technologies. EPA Method #24 VOC = Volatile Organic Compounds. L The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated. Consult International Paint.
,
455FB
Vessel Area
Flat Bottom
Surface Preparation
Major Refurbishment, Repair or Upgrading of Approved Systems
Consult International Paint.
Product Data
Colour Volume Solids (ISO 3233:1998) Film Thickness (Typical) Theoretical Spreading Rate
(at stated volume solids and typical film thickness)
BBA 004 Dark Red BBA 008 Brown 58% Wet - 216m (8.5 mils) Dry - 125m (4.9 mils) 4.64m2/lt at 125m DFT (193 sq.ft/US gallon at 4.9mils DFT)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ASTM D-1640, 7.5) or (ISO 1517-1973) Min Overcoating Time (by self) Max Overcoating Time (by self) Min Time Before Flooding Pack Size Thinner (not normally required) Cleaner 2 hours 6 hours Extended 12 hours 20 litre GTA007 GTA007
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2005 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 495 2003
August 2005
www.international-marine.com
Coastal
Bulk Cargo
v Intersmooth 360 & 365 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
v Intersmooth 460 & 465 SPC q Interswift 655 s Interspeed 340 & 640
technology types
5 FOUL RELEASE
v SPC q HYBRID SPC/CDP s CDP
Product Description
TBT free, Controlled Depletion Polymer (CDP), self polishing antifouling systems. Expected Dataplan Satisfactory Performance Ratings in General Tradingv : Interspeed 340 70% Interspeed 640+ 70%
Features
TBT free
Benefits
Freedom from TBT restrictions and associated waste disposal costs Flexibility in drydock interval Freedom to apply over existing antifoulings in good condition Control of solvent emissions
Up to 36 months in service periods (vertical sides) Surface tolerant Low VOC content Interspeed 340 (363g/lt VOC) Interspeed 640+ (385g/lt VOC)
Depending on in service conditions and specification applied. Available in North America only. EPA Method #24 VOC = Volatile Organic Compounds. v The International Dataplan performance monitoring system records the application and performance of coating systems on over 30,000 vessels currently in service. At each drydocking, vessel details, including drydocking interval and coating performance are recorded. Antifouling coatings are assessed for the presence of fouling, (type, severity and extent) and from this unique database, an antifouling performance rating can be calculated. Consult International Paint.
Vessel Area
Underwater Hull and Boottop
Interspeed 640: New application.
Surface Preparation
Newbuilding: Major Refurbishment, Repair or Upgrading of Approved Systems
Interspeed 340 and Interspeed 640+ must be applied over a recommended anticorrosive system. Consult International Paint. Interspeed 340 and Interspeed 640+ must be applied over a recommended anticorrosive system. Consult International Paint.
Product Data
Colour
Interspeed 340 BQA 341 Base Coat Brown BQA 344 Top Coat Plum BQA 347 Top Coat Red
Interspeed 640+ BRA BRA BRA BRA BRA 62% Wet - 165m (6.5 mils) Dry - 102m (4.0 mils) 6.1m2/lt at 102m DFT (248 sq.ft/US gallon at 4.0 mils DFT) 640 641 642 643 644 Red Blue Black Ocean Green Ocean Grey
60% Wet - 208m (8.1 mils) Dry - 125m (4.9 mils) 4.8m2/lt at 125m DFT (193 sq.ft/US gallon at 4.9 mils DFT)
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:1973) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pack Size Thinner (not normally recommended) Cleaner 2 hours 6 hours 3 months 12 hours
6 hours 12 hours Extended 48 hours 5 US gallon unit International GTA007 International GTA007
+ Available in North America only. x ASTM D-2697 North America. Dependent upon scheme applied Consult International Paint.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
November 2004
www.international-marine.com
Intersleek 757: Stolt Inspiration, Stolt-Nielson Transportation Group. Intersleek 757: Broog, NYK Ship Management PTE Ltd.
Product Description
A silicone elastomer foul release coating for use on propellers.
Features
Ultra smooth, slippery, easy clean surface
Benefits
Propeller efficiency is maintained in service No in water cleaning required during in service period Potential for reduced cavitation-induced noise Freedom from biocide restrictions Environmental compliance Control of treatment and disposal costs for wash water/blasting abrasive at subsequent drydockings Flexibility in drydocking schedule (up to 60 monthsQ ) Surface remains smooth - if not subjected to abrasion or mechanical damage
Durable
Surface Preparation
High Pressure Fresh Water Wash Degrease (SSPC-SP1) Abrasive blast clean using 30-60 grade garnet to give a surface profile of 35-65 microns.
Product Data
Colour
Volume Solids (ISO 3233:1998) u Film Thickness Theoretical Spreading Rate
(at stated volume solids and typical film thickness)
Intersleek 757 Finish Red BXA 756/758/759 72% Wet - 208m (8.2 mils) Dry - 150m (5.9 mils) 4.8m2/lt (192 sq.ft/US gallon) at 150m (5.9 mils) DFT
Drying/Overcoating Times @ 25C (77F): Touch Dry (ISO 1517:73) Hard Dry (ISO 9117:90) Min Overcoating Time (ASTM D-1640, 7.8) Max Overcoating Time (ASTM D-1640, 7.8) Min Time Before Flooding Pot Life @ 25C (77F) Pack Size Thinner (not normally recommended) Cleaner
u x xx Consult International Paint for availability of other colours. ASTM D-2697 North America. Intersleek 731 in North America. Use Intergard 264 in North America. Consult International Paint.
2 hours 5 hours 12 hours 1 week Not applicable 1 hour 10 litre unit (mixed) 2 US gallon unit International GTA007 International GTA822
3 hours 5 hours Not applicable Consult International 24 hours 1 hour 10 litre unit (mixed) 2 1/2 US gallon unit International GTA007 International GTA822
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2005 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320
April 2005
www.international-marine.com
being copper oxide, copper complexes are more tightly bound and stable in seawater than zinc complexes. In the presence of the copper oxide biocide, zinc acrylate systems (in our experience) may undergo chemical exchange reactions with the copper oxide biocide. Copper acrylate systems do not undergo this exchange. The stability, longevity and performance of the copper acrylate (Intersmooth SPC) systems can therefore be expected to be greater than that of typical zinc acrylate deep sea systems. Copper acrylate antifoulings have now been well proven over more than 12 years with many examples of vessels being free of all macrofouling for five year in service periods.
The type and quantity of biocide(s) in the formulation. The delivery mechanism used to control the release of the biocides.
In both silyl acrylate and copper acrylate (Intersmooth SPC) antifoulings, the biocides are similar, consisting of a high loading of copper oxide with a boosting biocide (or biocides). The most commonly used boosting biocides are the pyrithiones (copper or zinc), both used at a relatively low level. The main difference between the pyrithiones is that copper pyrithione is less soluble in seawater and has been shown to be less effective than zinc pyrithione in cooler (<15C) waters. Silyl acrylate systems which use copper pyrithione as a boosting biocide are therefore generally not as effective in cold waters as the copper acrylate (Intersmooth SPC) systems which use zinc pyrithione.
The delivery mechanisms of the two technologies depend entirely on the reaction of the two polymer systems in seawater. Both systems are based on an acrylic polymer with pendant carboxyl groups to which either a silyl compound or a copper compound are chemically bonded. This bond breaks (hydrolyses) in seawater, rendering the resultant carboxyl polymer soluble, which then provides the self polishing action. The rate of hydrolysis depends on seawater conditions with salinity and temperature being the two most important factors. If the hydrolysis rate is too fast then the paint polishes away too quickly; if the hydrolysis rate is too slow, then not enough biocides are released to prevent fouling. Many silyl acrylate systems contain rosin in order to help control hydrolysis rate and therefore, rather than being true SPC types, they are more comparable to the hybrid types, such as Interswift 655: see below. Copper acrylate antifoulings have now been well proven over more than 12 years with many examples of vessels being free of all macrofouling for five year in service periods. b) Hybrid SPC: Interswift 655 Interswift 655 is a new, patented hybrid TBT free self polishing antifouling incorporating copper acrylate technology. Designed to complement our existing range of TBT free antifouling products, the parents of Interswift 655 are the premium TBT free self polishing copolymer Intersmooth SPC and the controlled depletion polymer Interspeed 340, both of which are well proven technologies with extensive track records. Creating this new hybrid has been possible by carefully combining the patented copper acrylate SPC technology of Intersmooth SPC with the rosin based controlled depletion polymer technology of Interspeed 340. This results in an effective antifouling which has the features of CDP surface tolerance and attractive volume solids content, together with the SPC attributes of polishing rate control, control of biocide release and reduced leached layer size.
c) CDP: Interspeed 340 TBT free, controlled depletion polymer antifoulings rely on a physical dissolution of the paint film to provide the polishing action. CDP antifoulings are also referred to as ablative or eroding and rely on the presence of rosin in the coating to provide the physical dissolution at the surface. For additional film toughness and durability, reinforcing resins are also used. 2) Foul Release Technology: Intersleek 700. Intersleek 700 is a unique, non stick, foul release coating system designed for high activity, deep sea scheduled ships (>15-30 knots). The technology provides an ultra smooth, slippery, easy clean surface with the potential for reductions in average hull roughness through careful application. Intersleek 700 does not use biocides to control fouling and is chemically durable with excellent colour retention. Environmental compliance is assured with freedom from all current and future biocide restrictions. Control of treatment and waste disposal costs for wash water/blasting abrasive at subsequent drydockings are additional benefits of the Intersleek 700 system. Drydock scheduling can be flexible with in service periods of up to five years possible. Intersleek 700 now has a proven, hugely successful (full ship) track record of over 60 vessels, several of which have over 60 months experience in service. Foul Release Linkcoat: Intersleek 717 Intersleek 717 Linkcoat is a pioneering first and technically advanced foul release conversion coating which functions both as a sealer coat for existing TBT SPC antifoulings and as a strong Linkcoat to allow the application of the Intersleek 700 foul release system. For scheduled ship operators whose vessels are currently coated with SPC antifoulings, Intersleek 717 offers a high performance, cost effective conversion route to all of the associated operational and environmental benefits of the Intersleek 700 system without the need for expensive, full reblasting of the underwater hull. Intersleek 717 adds to customer choice and has opened up more attractive and flexible options for the installation of foul release technology at Newbuilding or Maintenance and Repair.
Interswift 655 after 31 months in service, before washing, on a 27,563 DWT bulk carrier.
Intersleek 700 after 30 months in service on a 72,176 DWT LNG carrier, light slime only and an excellent result.
Hull Roughness Whilst silicone based foul release systems are applied smooth and stay smooth in service, when considering alternative biocidal antifouling protection it is worth remembering the basic principles of hull roughness and the effect of increased roughness on ship performance. Hull roughness is defined as the maximum peak to trough height, expressed in microns, for any given length of 50mm along the underwater hull. There are two main types of roughness: biological and physical. Biological roughness is the accumulation of plant or animal growth on ships hulls (fouling). Physical roughness can be attributable to vessel age and design plus the type of coating system used this includes anticorrosive, abrasion resistant and antifouling coatings. Increased physical roughness commonly results from mechanical damage, poor maintenance practice, the build up of old coatings or from the use of a non polishing and smoothing antifouling. Both types of hull roughness, however, will increase frictional resistance or vessel drag resulting in an additional power requirement and increased fuel cost to maintain vessel speed. The economic consequences of hull roughness can be seen in the graph Hull Roughness vs Age of Ship, which relates increasing surface roughness to the percentage increase in power required to maintain speed. TBT free SPC antifoulings are formulated to provide high levels of biological roughness control (fouling) and, through self polishing and smoothing, high levels of physical roughness control. The well proven operational benefits of TBT SPC technology can still be realised through the correct choice of TBT free SPC antifouling.
Anticorrosive
Intersmooth SPC antifoulings are formulated to control roughness of the hull through self polishing and smoothing. Under normal operating conditions, Intersmooth SPC antifoulings polish at a rate proportional to both the velocity and turbulence of water flow over the surface.
Glossary of Terms/Technology Explained Self Polishing Copolymer (SPC) : The paint polymer or binder system is made soluble in seawater by hydrolysis. This is a controlled chemical reaction and only occurs at the surface of the coating. SPC technology combines controlled polishing rate and optimum biocide release with inherent self smoothing for hull roughness control and maximum fuel efficiency. Leached layers are always thin, <15m (0.6 mils) providing a smooth surface. Self Polishing: The paint polymer or binder system is soluble in seawater. Solubility can be achieved either by a chemical reaction e.g. hydrolysis, as in SPC technology or by the use of Rosin e.g. in CDP technology. Smoothing or Self Smoothing: A controlled reduction in surface roughness of Self Polishing Copolymer antifoulings resulting from the removal of surface peaks. The smoothing benefit from the use of SPC antifoulings should not be confused with a general reduction in hull roughness from abrasive blast cleaning or hydroblasting. Polishing: Polishing is the overall reduction of film thickness. Polishing is a bulk film effect and can occur without smoothing (but not vice versa). Polishing Rate: Film thickness reduction per unit time. For SPC antifoulings, polishing rate is directly proportional to vessel speed. Leached Layer: A biocide depleted spent layer at the surface of the coating. In SPC antifoulings the leached layer is always thin, <15m (0.6 mils), providing a smooth surface. Conversely, CDP leached layers can become very thick, >75m (3 mils), resulting in increased surface roughness plus removal and overcoating difficulties. Leaching Rate: The release of biocide per unit time. There are three technologies or delivery mechanisms available to control biocide release SPC, CDP and a combination of the two, known as hybrid SPC. Controlled Depletion Polymers (CDP): Antifouling with high rosin content enabling self polishing to occur. Antifoulings with low rosin content are referred to as Contact Leaching antifoulings and do not polish. Hybrid SPC: An antifouling with both SPC and CDP features. Rosin: Naturally occurring resin extracted from trees. Rosin is soluble in seawater. Average Hull Roughness (AHR): The mean value of all hull roughness measurements on the underwater hull. Modal Hull Roughness (MHR): The most commonly occurring hull roughness measurement on the underwater hull.
The two curves represent typical upper and lower hull roughness measurements for non-smoothing antifoulings. Roughness can increase from 75m to 250m within two years, representing an extra 15% power requirement to maintain speed.
MIGNON, Large Vehicles Carrier : WALLENIUS Hull Roughness of Intersmooth 465 SPC (Vessel sides) 1999 Outdocking: 2002 Indocking
30.0% 25.0% Frequency 20.0% Smoothing Benefit 15.0% 10.0% 5.0% 0.0% 20 40 60 80 100 Roughness (microns) 120 140 2002 (82 microns AHR) 1999 (78 microns AHR)
Whilst the Average Hull Roughness (AHR) has slightly increased due to mechanical damage, the roughness distribution has become less widespread, resulting in a smoothing benefit (or roughness reduction).
Hull Roughness Penalty Calculator (HRPC): A calculation tool to compare the cost increase of different antifoulings over time (due to increasing hull roughness) to the initial installation cost. The extra CO2 and SOX emissions, due to the extra fuel used as roughness increases, are also calculated.
Intersmooth 460 SPC Series Intersmooth 360 SPC Series Intersleek 700 Intersmooth 460 SPC Series Intersmooth 460 SPC Series
Interswift 655 Interswift 655 Intersmooth 460 SPC Series Interswift 655 Interswift 655
Interspeed 340x Interspeed 340x Interswift 655 Interspeed 340x Interspeed 340x
Intersleek 700 Intersleek 425 Intersleek 700 Intersmooth 460 SPC Series Intersleek 700
Intersmooth 460 SPC Series Intersmooth 460 SPC Series Intersmooth 460 SPC Series Interswift 655 Intersmooth 460 SPC Series
Interswift 655 Interswift 655 Interswift 655 Interspeed 340x Interswift 655
Intersmooth 460 SPC Series Intersmooth 360 Series or 460 Series SPC Intersleek 700 Intersmooth 460 SPC Series Intersleek 700 Intersleek 700
Intersmooth 460 SPC Series Interswift 655 Intersmooth 460 SPC Series Intersmooth 460 SPC Series
x Interspeed 640 in North America Note: These product options are for vessels that are considered typical in terms of operational profile, i.e. vessel speed and activity. The order of preference may change for those that are not typical. Consult International Paint for individual advice on specific vessels.
TBT sealer coat selector by technology type: Sealer Intertuf 203 Intergard 263 Intersleek 717 Type 700/425 Tar Free Vinyl (1 pack) Tar Free Epoxy (2 pack) Tar Free Epoxy (2 pack) X X TBT free system compatibility with sealer coat 460/360 655 340
X
X
X
International Paint offers a wide range of TBT antifouling sealers, for use in conversions of existing schemes to TBT free systems. Please consult International Paint for individual advice on specific vessels, including sealers appropriate for our North American antifouling products. International Paint confirms that the product, when tested in accordance with ASTM D5108-96 (modified), formed a barrier to TBT leaching from an underlying TBT antifouling.
Important Notes: All representations and statements concerning the product(s) in this brochure are accurate to the best of our knowledge. Statements made in this brochure are advisory only and are not intended to be specific recommendations or warranties of any product, combination of products or fitness for any particular purpose. To the extent permitted by law, we do not accept any liability to any person for any loss or damage (direct or indirect) that may arise from any use of or reliance on any of the methods or information contained in this brochure for any purpose. Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company. Any warranties, if given, are contained in those standard Conditions of Sale and are the only ones made with respect to any products we sell to you or advice or recommendations we give to you. For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website: www.international-marine.com , International and all products mentioned in this brochure are trademarks of or are licensed to Akzo Nobel. Akzo Nobel, 2004 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 402 2775 Fax: +44 (0)191 401 2320 November 2004
SL30/PI4031