Presentation of Project stage-II
Presentation of Project stage-II
Note:- 1) Group members have to meet your guide and show project report soft
copy,PPT,Synopsis, Research papers Evolution Sheets and Diary as per
instructions given in syllabus and take sign on the same.
2) Bring all the data in soft copy and finalize that data through your guide
and after getting permission from guide then take the printouts. Without
guide permission no one can print your project report.
3) Presentation of work in the form of Project Report (s), Understanding
individual capacity, Role & involvement in the project, Team Work
(Distribution of work, intra-team communication and togetherness),
Participation in various contests, Publications and IPR, Manuals (Project
Report, Quick reference, System, Installation guide) among other
parameters. Team members with guide information shall be added at the
end of the report.
Guidelines for Project Power point Presentation
Guide name
CERTIFICATE
This is to certify that
It gives us great pleasure to present a dissertation on “Title of your Project.” A number of people helped us
during the completion of this project. Thus, it becomes our duty to express our gratitude towards them.
I am deeply indebted to my Dissertation Guide name and the Head of Mechanical engineering department
Dr.S.R.Sandanshiv for their valuable suggestions, scholarly guidance, constructive criticism and constant
encouragement at every step of the Project.
We will fail in our duty if we don’t acknowledge a sense of gratitude to The Principal Dr.R.K.Jambi , President Hon Shri.
Rambhau Moze and special thanks for entire staff of the Mechanical Engineering Department for their cooperation and
support.
Note:- Abstract Format You can change as per your requirement
ABSTRACT
The Special Purpose Machines are generally product specific & they are required to be designed &
developed for each specific requirement. The use of Special Purpose Machines (SPM) minimizes possibility
of human errors and also reduces human fatigue in carrying out repetitive operations again and again.
Counting Machine is also a SPM which is used for the counting of the products such as nuts, bolts,
rivets, etc which are not that much costly but counting of such units by traditional ways takes more time and
there may be chances of errors. Since the price of individual component is very less so if more products get
packed will not affect the company’s economy. So it is not important when the demand of such components is
less. But, if the demand is in tones of such components then the packing of extra components in each packet
will definitely cause loss to the company. So to avoid this or to reduce this, Counting Machine is more reliable
than the traditional ways which are using these days for counting.
Note:- Index, list of table and list of figure Format You can change as per
your report
INDEX
Chapter
Contents Page No.
No.
1 Introduction 1
1.1 History 3
1.2 Problem Statement 5
1.3 Objective 6
1.4 Scope 6
2 Literature Review 7
3 Company Profile 12
3.1 About Company 12
3.2 Products 13
3.3 Services 13
4 System Design 14
4.1 System And Structure Design 14
4.2 Components Of System 15
4.3 Chances Of Failure 15
5 Design Calculations 17
5.1 Design Of Bowl Feeder 17
5.2 Design Of Conveyor 20
5.3 Design Of Table 27
6 Working Operations 32
6.1 Working Of Bowl 32
6.2 Working Of Belt Conveyor Unit 37
6.3 Working Of Sensor 38
7 Manufacturing 41
7.1 Selection Of Material 41
7.2 Manufacturing Processes For Bowl 41
7.3 Fabrication And Operation Sheets 46
8 Maintenance And Cost Estimation 51
8.1 Maintenance Of System 51
8.2 Cost Estimation 54
9 9.1 Advantages And Disadvantages 54
9.2 Application 54
9.3 Result And Discussion 55
9.4 Future Scope 55
10 Conclusion 56
11 References 57
LIST OF TABLE