ST-909 User Manual 242
ST-909 User Manual 242
ST-909 User Manual 242
User Manual
1/12
Quick Start
Thank you for purchasing our GPS tracker.
This Quick User shows how to operate the device smoothly and correctly.
Platform: VIP.SinoTrack.com
Password: 123456
Server: VIP.SinoTrack
User Name: ID number on tracker
Password: 123456
If you have more SinoTrack GPS trackers, and want to manage them in
one account, please contact us, we will create an account for you, so you
can monitor multiple devices on the platform at the same time.
2/12
1. Choose GSM card, it should be Micro SIM card, without PIN code.
2. Proper insert GSM card, the tracker will start, connect external power supply.
3. Put device outside around 30s, LED lights will keep lighting on stands for
device can work normally.
4. Dialing device number, it will hang up and reply tracking message with valid
Lon and lat.
5. Please send SMS to tracker to set the APN: (the yellow place is BLANK)
SMS: 8030000 APN
(APN is Access Point Name of your SIM Card, please check with your SIM
Card provider if you don’t know it)
3/12
If the APN need User name and Password, please send the command:
SMS: 8030000 APN APNuser APNpassword
How to install:
Insert SIM Card in ST-909, And insert ST-909 to car cigarette lighter
4/12
LED Status
Status Meaning
Flashing No GPS Signal or GPS starting
ON GPS OK
5/12
Functions:
1. Set control number:
Command: Number+pass+blank+serial
Sample: 139504434650000 1
13950443465 is mobile number, 0000 is password, 1 is serial means the first
number.
When the tracker reply “SET OK” means the setting is ok.
You can set the second and third control number also.
2. Working mode:
ST-909 has both SMS and GPRS working mode.
1. If you want to control it by mobile and use SMS only, you can get Google
location from you mobile, then you can choose SMS mode.
2. If you want to monitor the tracker online real time, and you want to install the
tracker data for years, you should choose the GPRS mode.
You can send SMS to choose the mode.
SMS Mode: (Default)
Command: 700+Password
Sample: 7000000
Reply: SET OK
When ST-909 receives the command, it will change to SMS mode.
GPRS Mode:
Command: 710+Password
Sample: 7100000
Reply: SET OK
When ST-909 receives the command, it will change to GPRS mode.
3. Change Password
Command: 777+New Password+Old password
Sample: 77712340000
The 1234 is new password, and 0000 is old password.
When ST-909 received the command, it will reply SET OK
6/12
5. Get location by phone call.
You can use any mobile to call the SIM Card in tracker, it will reply the location
with Google link;you can open the link to check the tracker location on maps.
When you call the tracker when it is in invalid location, it will reply the last
valid location to you, after it get new location again, it will send the seconds
SMS to you with new location.
7/12
8. Geo Fence (send alarm to the first number only)
Open Geo Fence: 211+password
Sample: 2110000
Reply: SET OK
Close Geo Fence: 210+password
Sample: 2100000
Reply: SET OK
Set the Geo Fence
Sample: 0050000 1000 (the Geo Fence is 1000 meters)
Reply SET OK
We suggest the Geo Fence more than 1000 meters.
10. Mileage
Set the initial Mileage
Command: 142+Password<+M+X>
Reply: MILEAGE RESET OK
Sample: 1420000M1000
Reply: SET OK, CURRENT: 1000
Red the current Mileage
Command: 143+password
Sample: 1430000
Reply: CURRENT TOTAL MILEAGE:XX.
XX is the mileage, the unit is meter.
8/12
11. Shock Alarm (send SMS alarm to the first number)
Open Shock Alarm: 181+password+T
Sample: 1810000T10
Reply: SET OK
The T meaning shocking time, the unit is second,
It from 0 to 120 senconds.
Close Shock Alarm: 180+password
Sample: 1800000
Reply: SET OK
When the battery is Full, Bat:5, means 100%; Bat:4 means 80%, Bat:3 means
60%, Bat:2 means 40%, Bat:1 means 20%. When the Bat is 1, it will send low
battery alarm.
9/12
14. Sleep mode
Open Sleep mode
Command: SLEEP0000 1
Reply: SET OK
10/12
Online Track:
Please login from VIP.SinoTrack.com or http://45.112.204.242
You can also down load our APPS on website to track on your mobile:
11/12
Other Functions:
1. RESTART
The tracker will restart.
2. RCONF
Read the configure of tracker
12/12