Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    FDFILT 28spec

    Uploaded by

    josue jetavionics
    The Flight Display Systems remote control and RF receiver base station allows controlling all audio/video components in an aircraft cabin from a single wireless RF/IR remote control. The remote control can operate via either IR or RF signals. The IR remote can learn codes from other equipment by being placed face-to-face with them. The RF remote has a range of 50 to 100 feet and can control up to 20 devices. The base station can control 6 devices individually via included 10 foot IR emitter cords.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    FDFILT 28spec

    Uploaded by

    josue jetavionics
    17 views2 pages
    The Flight Display Systems remote control and RF receiver base station allows controlling all audio/video components in an aircraft cabin from a single wireless RF/IR remote control. The remote control can operate via either IR or RF signals. The IR remote can learn codes from other equipment by being placed face-to-face with them. The RF remote has a range of 50 to 100 feet and can control up to 20 devices. The base station can control 6 devices individually via included 10 foot IR emitter cords.

    Original Description:

    Original Title

    FDFILT-28spec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Flight Display Systems remote control and RF receiver base station allows controlling all audio/video components in an aircraft cabin from a single wireless RF/IR remote control. The remote control can operate via either IR or RF signals. The IR remote can learn codes from other equipment by being placed face-to-face with them. The RF remote has a range of 50 to 100 feet and can control up to 20 devices. The base station can control 6 devices individually via included 10 foot IR emitter cords.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    17 views2 pages

    FDFILT 28spec

    Uploaded by

    josue jetavionics
    The Flight Display Systems remote control and RF receiver base station allows controlling all audio/video components in an aircraft cabin from a single wireless RF/IR remote control. The remote control can operate via either IR or RF signals. The IR remote can learn codes from other equipment by being placed face-to-face with them. The RF remote has a range of 50 to 100 feet and can control up to 20 devices. The base station can control 6 devices individually via included 10 foot IR emitter cords.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 2

    The Flight Display Systems remote control and RF receiver base

    station enable you to control all the audio/video components


    in the cabin with a single RF/IR wireless unit
    • The remote control can be used for either IR or RF control
    • The IR remote is self learning and can learn the code of each
    piece of equipment by placing the 2 remotes face-to-face
    and sending the information
    FDREMOTE-M
    • Converts IR to RF for increased versatility of remote
    anywhere in aircraft
    • The RF remote can control up to 20 different devices. The
    DO-160 TESTED FAA/PMA Approved
    remote has a USB port and the system can be configured
    Dimensions, Base Unit 7.8” (W) x 1.36 “ (H) X 5” (D)
    using a PC
    Dimensions, Remote 8.9” (W) x 1.1” (H) 2.35” (D)
    • The base station can control 6 individual pieces of Weight, Base Unit 1 lb
    equipment. System comes with 6 cords that are 10 feet Weight, Remote 7.6 oz (with batteries)
    in length that plug in the back and provide an IR Emitter Range 50 to 100 feet
    (Dinky LinkTM) that is attached to the IR receiver on each RF Frequency 418MHZ
    piece of equipment RF Output Power Less than 1 mW
    • Long range - 50 to 100 feet

    Power, Remote Four AAA Alkaline Batteries


    Power, Base Unit 28V DC

    Designed to reduce visual noise that is typically generated on


    a LCD screen due to a “dirty” power source. Power noise is
    visually seen on monitors as diagonal lines
    • Filter includes a 20 Amp ATC fuse and a protection diode
    to prevent the connected equipment from damage by a
    short circuit or over current
    • Small size means installation virtually anywhere

    FDFILT-28

    DO-160 TESTED FAA/PMA Approved


    Dimensions: 2.62” (W) x 2.54” (H) x 1.43” (D)
    Weight: 4.6 oz
    Maximum Amperage: 15 Amps
    Power: 28VDC
    After Filter Noise Eliminated
    Connector DB-9
    Diagonal Power Noise

    CURRENT AS OF 08/11/2009
    The FDAIP is an Auxiliary Input Panel designed to serve as an easily
    accessible method of providing video and audio from systems
    such as MP3 Players, PlayStation/X-Box systems, camcorders, etc to an FDAIP-B
    existing entertainment system
    • Available in 2 models: FDAIP-P (square) - comes with a standard plate,
    FDAIP-B (oval) - comes with a 2 piece bevel to match the customer’s
    interior
    FDAIP-B
    • Both models come unfinished and can be anodized, painted or plated
    • Connects to FD932DVD-4B, directly to monitor, or to distribution
    amplifiers for use around entire aircraft

    FDAIP-P
    Dimensions 2”(W) x 1.5”(H) x 1.1”(D)
    Weight 3.2 oz
    Materials Stainless Steel or Aluminum

    You might also like