Professional Documents
Culture Documents
AnycubicSlicer - Usage Instructions - V1.0 - EN
AnycubicSlicer - Usage Instructions - V1.0 - EN
Usage Instructions
Team ANYCUBIC
Contents
01 Installation ---------------------------------------------------------3
02 Overview ----------------------------------------------------------- 6
03 Settings ------------------------------------------------------------- 7
1. Import ----------------------------------------------------------- 7
1. Slice -------------------------------------------------------------- 26
2. Preview----------------------------------------------------------- 29
3. Export------------------------------------------------------------- 34
Installation
1. Installation
• Windows
Close the anti-virus software before installation. Open the suitable package
and then follow the guide as shown below.
01 02
• Mac
3
Installation
Windows
RAM ≥ 16GB
Mac OS
Disk Space ≥ 64 GB
4
Installation
2. Language
Click “设置”-“首选项”-“语言”to switch the language to English if the
language is set as Chinese.
01
Windows
MAC
Mac
02
5
Overview
⑪
⑤
③
6
Settings
1. Import
Import your own 3D format model, i.e. STL or OBJ file, etc.
01
02
03
① Printer settings
01 02
03
② Filament Settings
02
01
03
9
Settings
③ Printing Settings
The system has preset printing settings for each type of printer, you can
choose corresponding printing settings as needed.
You can create custom printing settings by copying the preset printing 0
settings:
02
01
03
Set the slice parameters of print settings according to your requirement in print
setting interface. Then close configuration manage window to apply it.
10
Introduction to Functions
1. View Changing
• Mouse: Scroll the mouse wheel to zoom in/out; right click the platform
and drag to move it; left click the platform and move to change view
angle.
• View menu: Switch to different views.
11
Introduction to Functions
2. Model Edit
12
Introduction to Functions
Paint-on support:
01 02
No paint-on support
13
Introduction to Functions
2. Model Edit
Seam Painting: Paint on the model to mark location where the seam point
of each layer.
14
Export Sliced File
1. Slice
When the setting is finished, click Slice Now.
2. Preview
In the slice file view interface, you can see printing paths by feature type
15
Export Sliced File
3. Export
• Return Editor: If some other manipulations of model are needed, click
“Return Editor” and go back to editing interface.
• Export G-code: Export G-code file to a local device then use touchscreen
to start printing
16