Cisco 32x1 10GE For Nexus7000 Data - Sheet - c78 605622
Cisco 32x1 10GE For Nexus7000 Data - Sheet - c78 605622
Powerful access control list (ACL) processing supports 32,000 per module, ingress and egress, with the ACL entries addressing Layer 2, 3, and 4 fields. The F1 forwarding engine also supports applications requiring port mirroring with integrated hardware support for 16 simultaneous unidirectional switched-port analyzer (SPAN) sessions per module. Additionally, the F1 series delivers integrated hardware support for Fibre Channel over Ethernet (FCoE) and IEEE Data Center Bridging (DCB) features, greatly simplifying the network infrastructure and reducing costs by enabling the deployment of unified data center fabrics to consolidate data center traffic onto a single, general-purpose, highperformance, highly available network. The Cisco Nexus 7000 F-Series modules, when combined with the powerful Cisco NX-OS Software, deliver Cisco FabricPath multipath Ethernet technologies based on IETF Transparent Interconnection of Lots of Links (TRILL). Cisco FabricPath comprises a set of multipath Ethernet technologies combines the reliability and scalability benefits of Layer 3 routing with the flexibility of Layer 2 Ethernet networks. With Cisco FabricPath, organizations can now build massively scalable, flexible networks that efficiently use available bandwidth between nodes, offering improved network resiliency. Cisco FabricPath offers a topology-based Layer 2 routing mechanism that provides an equal-cost multipath (ECMP) forwarding model. Cisco FabricPath implements an enhancement that resolves the MAC address table scalability challenge characteristic of switched Layer 2 networks. Enhanced virtual PortChannel (vPC+) is another technology offered by Cisco FabricPath. Similar to vPC, vPC+ allows the redundant interconnection of the existing Ethernet infrastructure to a Cisco FabricPath fabric without relying on Spanning Tree Protocol.
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Data Sheet
Operational simplicity: Cisco FabricPath embeds an autodiscovery mechanism that does not require any additional platform configuration. By offering Layer 2 connectivity, this VLAN anywhere characteristic simplifies provisioning and offers workload flexibility across the network.
High resiliency and performance: Since Cisco FabricPath is a Layer 2 routed protocol, it offers stability, scalability, and optimized resiliency along with network failure containment.
Massively scalable fabric: By building a forwarding model on 16-way ECMP, Cisco FabricPath helps prevent bandwidth bottlenecks and allows capacity to be added dynamically, without network disruption.
The Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module delivers up to 512 ports per chassis, capable of flexibly supporting both Gigabit and 10 Gigabit Ethernet on a per-port basis. Both Small Form-Factor Pluggable (SFP) and SFP+ optics are available for long- and short-haul applications, including Twinax support, for rack-to-rack data center applications, enabling migration and support for numerous deployment scenarios requiring different media types. Table 1 summarizes the features and benefits of the Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module.
Table 1.
Feature High-density 10 Gigabit Ethernet module Cisco FabricPath technologies based on IETF TRILL Unified fabric support through hardware integration of IEEE DCB capabilities
Ideally suited for deployment in latency-sensitive applications Interface flexibility with SFP and SFP+ support Efficient power use combined with high performance Virtual output queuing with centralized arbitration Load sharing across all fabric modules Distributed forwarding Online insertion and removal (OIR) Identification (ID) LED
Product Specifications
Table 2 lists the product specifications for the Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module, and Tables 3 and 4 list specifications for pluggable optics.
Not all Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module features are enabled in the first software release. Refer to the release notes for up-to-date software version information to see what features are supported.
Page 2 of 6
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Data Sheet
Table 2.
Item System
Product Specifications
Specifications
Supported in all Cisco Nexus 7000 Series chassis Cisco NX-OS Software Release 5.1.(1) or later (minimum requirement) 1 GB DRAM Status: Green (operational), red (faulty), or orange (module booting) Link: Green (port enabled and connected), orange (port disabled), off (port enabled and not connected), or blinking green and orange in conjunction with ID LED blue (port flagged for identification; beacon) ID: Blue (operator has flagged this card for identification; beacon) or off (module not flagged) XML Scriptable command-line interface (CLI) Cisco Data Center Network Manager (DCNM) GUI
Programming interfaces
32 ports of Gigabit Ethernet and 10 Gigabit Ethernet (SFP or SFP+ pluggable optic modules) 256 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 10-slot chassis 512 ports of Gigabit Ethernet and 10 Gigabit Ethernet for 18-slot chassis
Configurable template-based queuing modes: Ingress (4q4t and 2q4t) Egress (1p3q1t, 2p2q1t, 3p1q1t, 2p6q1t, 3p5q1t, and 1p7q1t)
Scheduler Jumbo frame support for bridged and routed packets Forwarding Engine: F1 Performance MAC entries VLANs ACLs FCoE entries Fabric Interface Switch fabric interface
480-mpps Layer 2 forwarding capacity 16,000 per forwarding engine, and up to 256,000 per module 4,000 per forwarding engine, and up to 16,000 per module 32,000 per module: 1000 ingress and 1000 egress per sequential port group pair 10,000 per module
230 Gbps in each direction (460 Gbps full duplex) distributed across five Cisco Nexus 7000 46Gbps/Slot Fabric Modules fabric modules 320-Gbps switching capacity, per module, in meshed architectures
Occupies one I/O module slot in a Cisco Nexus 7000 Series chassis Dimensions (H x W x D): 1.733 x 15.3 x 22.68 in (4.4 x 38.9 x 57.6 cm) Weight: 15.5 lb with SFP+ and 14 lb without SFP+ module
Maximum power consumption Mean time between failure (MTBF) Environmental conditions
385W per module 90,994 hours Operating temperature: 32 to 130 (0 to 50 F C) Operational relative humidity: 5 to 90%, noncondensing Storage temperature: -40F to 158 (-40 to 70 F C) Storage relative humidity: 5 to 95%, noncondensing
Regulatory compliance
EMC compliance FCC Part 15 (CFR 47) (USA) Class A ICES-003 (Canada) Class A EN55022 (Europe) Class A CISPR22 (International) Class A AS/NZS CISPR22 (Australia and New Zealand) Class A VCCI (Japan) Class A
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 6
Data Sheet
Item
Specifications KN22 (Korea) Class A CNS13438 (Taiwan) Class A CISPR24 EN55024 EN50082-1 EN61000-3-2 EN61000-3-3 EN61000-6-1 EN300 386
Environmental standards
NEBS criteria levels SR-3580 NEBS Level 3 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4) Verizon NEBS compliance Telecommunications Carrier Group (TCG) Checklist Qwest NEBS requirements Telecommunications Carrier Group (TCG) Checklist ATT NEBS requirements ATT TP76200 level 3 and TCG Checklist ETSI ETSI 300 019-1-1, Class 1.2 Storage ETSI 300 019-1-2, Class 2.3 Transportation ETSI 300 019-1-3, Class 3.2 Stationary Use
Safety
UL/CSA/IEC/EN 60950-1 AS/NZS 60950 Cisco Nexus 7000 Series Switches come with the standard Cisco one-year limited hardware warranty
Warranty
Table 3.
SFP-10G-LRM
1310
MMF
G.652 50 50 62.5
1310 1550 -
SMF SMF Twinax cable, 30AWG cable assembly Twinax cable, 30AWG cable assembly Twinax cable, 24AWG cable assembly Twinax cable, 24AWG cable assembly Twinax cable, 24AWG cable assembly
G.652
Not all optics are supported in the first software release. Refer to the release notes for up-to-date software version information to see what optics are supported. 3 Specified at transmission wavelength. 4 Minimum cabling distance for -SR, -LRM, -LR, and -ER modules is 2m, according to IEEE 802.3ae. 5 Links longer than 30 km are considered engineered links according to IEEE 802.3ae.
Page 4 of 6
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Data Sheet
Note:
http://cisco.com/en/US/prod/collateral/modules/ps5455/data_sheet_c78-455693.html.
Table 4. Gigabit Ethernet Interface Distances and Options6
Wavelength (nm) 850 Fiber and Cable Type MMF Core Size (microns) 50 50 50 62.5 62.5
7
Model Bandwidth (MHz per km) 400 500 2000 160 200
SFP-GE-L
1310
MMF
50 50 62.5
G.652 G.652
50 50 50 62.5 62.5
500m 550m 1000m 220m 275m 550m 550m 550m 10 km 70 to 100 km 100m 8
GLC-LH-SM
1310
MMF
50 50 62.5
G.652 G.652 -
Note:
http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet0900aecd8033f885.html.
Ordering Information
To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 5 provides ordering information
Not all optics are supported in the first software release. Refer to the release notes for up-to-date software version information to see what optics are supported. 7 A mode-conditioning patch is required. Use of an ordinary patch cord with MMF, 1000BASE-LX/LH SFPs, and a short link distance (tens of meters) can cause transceiver saturation, resulting in an elevated bit error rate. In addition, when using the LX/LH SFP with 62.5-micron-diameter MMF, you must install a mode-conditioning patch cord between the SFP and the MMF cable on both the transmit and receive ends of the link. The mode-conditioning patch cord is required for link distances greater than 300m. 8 1000BASE-ZX SFP can reach up to 100 km by using dispersion-shifted SMF or low attenuation SMF; the distance depends on fiber quality, number of splices, and connectors. 9 Also offered in other wavelengths. See the coarse wavelength-division mulitplexing (CWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/product_data_sheet09186a00801a557c.html. 10 Also offered in other wavelengths. See the dense wavelength-division mulitplexing (DWDM) SFP optics data sheet for additional product numbers and information: http://cisco.com/en/US/prod/collateral/modules/ps5455/ps6576/product_data_sheet0900aecd80582763.html.
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 6
Data Sheet
Table 5.
Ordering Information
Part Number N7K-F132XP-15 N7K-F132XP-15=
Product Name Nexus 7000 - 32 Port 1G/10G Ethernet Module, SFP/SFP+ (and spare)
Printed in USA
C78-605622-01
09/10
2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 6