Professional Documents
Culture Documents
Eec PPT 2
Eec PPT 2
Guided By
Mr.D.K.Lakhe
Content
pavement surface.
a. For roads with raised kerbs Min. Min. 0.3 m and desirable 0.6 m from
0.3 m and desirable 0.6 m from the the edge of raised kerb.
edge of raised kerb.(as in urban
roads)
b. For roads without raised kerbs(as Min. 1.5 m from the edge of the
in rural roads) carriageway, subject to min. 5.0 m
from the centre line of the
carriageway.
6. Height and overhang of mounting
▪ The glare on eyes from the mounted lights decreases with increases in the
height of mounting. Usually, mounting height range from 6 to 10m.
• Overhangs on the lighting poles would keep the poles away from the
pavement edges, but still allow the lamp to be held above the kerb or towards
the pavements.
7. Spacing of lighting units
▪ The spacing between lamps on straight roads is about 3 to
5 times the mounting height.
▪ For sharp curves, the spacing between lamps is closer
for better visibility conditions.
8.Lighting layouts
▪ Various types of layouts adopted for lighting poles on streets or highways
are,
1. Single side lighting
2. Both side lighting-opposite
3. Both side lighting-staggered
4. Central lighting
Components and it’s specification
1. Light Poles
2. Luminaires (Light Fixtures)
3. Control Gear (Ballasts/Drivers)
4. Cables and Wiring
1. Light Poles
▪ Specifications:
o Height: - 12 ft.
o Shape: - Tubular
o Material: - Aluminum, steel, or
concrete
▪ Applications:- Roadways, highways,
residential areas, and commercial areas
2. Luminaires (Light Fixtures)
▪ Specifications:
o Light output: - 80 lumens / watt.
o Colour temperature: -
3000K (warm white light) –
4000K.
o Energy efficiency: - 50-75% more efficient the
other Street lights.
o Materials: LED or HID light source,
polycarbonate or tempered glass lens.
▪ Applications: Roadways, highways, parks,
parking lots, and public spaces
2. Control Gear (Ballasts/Drivers)
▪ Specifications:
o Voltage: - 120 volts
o Current: - 3-30Amps
o Power factor: - > .90
o Materials: capacitors, resistors, and
inductors, housed in a plastic or
metal enclosure.
▪ Applications: LED and HID lighting
systems.
3. Cables and Wiring
▪ Specifications:
o Conductor size:- 6 mm2.
o Insulation material:- Rubber , XLPE and P.V.C
o Voltage rating:- 120/240V
o Materials: Copper, PVC or XLPE insulation and protective outer jacket
made of PVC or polyethylene.
▪ .
Applications: Connecting the power supply to the luminaires and controlgear
THANK YOU
By-
Rushikesh Gopal Bhavsar
Darshan Yallapa Khaire
Sanket Dilip Mhaske
Yash Pravin Ladhe
Om Rajendra Gosavi