MURS320T3G
MURS320T3G
MURS360T3
Preferred Devices
Surface Mount
Ultrafast Power Rectifiers
This series employs the state−of−the−art epitaxial construction with
oxide passivation and metal overlay contact. Ideally suited for high http://onsemi.com
voltage, high frequency rectification, or as free wheeling and
protection diodes, in surface mount applications where compact size ULTRAFAST
and weight are critical to the system.
RECTIFIERS
Features 3.0 AMPERES
• Small Compact Surface Mountable Package with J−Bend Leads 200−600 VOLTS
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Low Forward Voltage Drop
SMC
(0.71 to 1.05 Volts Max @ 3.0 A, TJ = 150°C) CASE 403
• Pb−Free Packages are Available PLASTIC
Mechanical Characteristics
• Case: Epoxy, Molded
• Epoxy Meets UL 94 V−0 @ 0.125 in MARKING DIAGRAM
• Weight: 217 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal AYWW
Leads are Readily Solderable U3x
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 16 mm Tape and Reel, 2500 units per reel U3 = Specific Device Code
• Polarity: Notch in Plastic Body Indicates Cathode Lead x = D, G, or J
• Device Meets MSL1 Requirements A = Assembly Location
Y = Year
• ESD Ratings: Machine Model, C (> 400 V) WW= Work Week
Human Body Model, 3B (> 8000 V)
ORDERING INFORMATION
MAXIMUM RATINGS
Rating Symbol MURS320T3 MURS340T3 MURS360T3 Unit
Peak Repetitive Reverse Voltage VRRM 200 400 600 V
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
Average Rectified Forward Current IF(AV) 3.0 @ TL = 140°C 3.0 @ TL = 130°C 3.0 @ TL = 130°C A
4.0 @ TL = 130°C 4.0 @ TL = 115°C 4.0 @ TL = 115°C
Non−Repetitive Peak Surge Current IFSM 75 A
(Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
Operating Junction Temperature TJ 65 to +175 °C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Thermal Resistance, Junction−to−Lead RJL 11 °C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 1) vF V
(iF = 3.0 A, TJ = 25°C) 0.875 1.25 1.25
(iF = 4.0 A, TJ = 25°C) 0.89 1.28 1.28
(iF = 3.0 A, TJ = 150°C) 0.71 1.05 1.05
Maximum Instantaneous Reverse Current (Note 1) iR A
(Rated dc Voltage, TJ = 25°C) 5.0 10 10
(Rated dc Voltage, TJ = 150°C) 150 250 250
Maximum Reverse Recovery Time trr ns
(iF = 1.0 A, di/dt = 50 A/s) 35 75 75
(iF = 0.5 A, iR = 1.0 A, IREC to 0.25 A) 25 50 50
Maximum Forward Recovery Time tfr 25 50 50 ns
(iF = 1.0 A, di/dt = 100 A/s, Recovery to 1.0 V)
1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%.
http://onsemi.com
2
MURS320T3, MURS340T3, MURS360T3
MURS320T3
80
40 TJ = 175°C
5.0 20
0.1 1.0
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0
vF, INSTANTANEOUS VOLTAGE (VOLTS) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
10 200
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
6.0 60
5.0
40
4.0
30
3.0 dc
20
2.0
1.0 SQUARE WAVE
0 10
90 100 110 120 130 140 150 160 170 180 190 0 10 20 30 40 50 60 70 80 90 100
TC, CASE TEMPERATURE (°C) VR, REVERSE VOLTAGE (VOLTS)
Figure 4. Current Derating, Case Figure 5. Typical Capacitance
http://onsemi.com
3
MURS320T3, MURS340T3, MURS360T3
MURS340T3, MURS360T3
400
200
5.0 TJ = 175°C
80
0.3 * The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these same curves if VR is sufficiently below
0.2 rated VR.
PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 10
9.0
0.1
8.0
7.0
0.07 SQUARE WAVE
6.0
dc
5.0 (CAPACITIVE LOADS)
0.05
4.0 I
PK 20 10 5.0
I
3.0 AV
0.03
2.0
0.02 1.0
0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 0
vF, INSTANTANEOUS VOLTAGE (VOLTS) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
10 100
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
9.0 90
8.0 80 TYPICAL CAPACITANCE AT 0 V = 75 pF
C, CAPACITANCE (pF)
7.0 70
6.0 60
5.0 50
4.0 40
dc
3.0 30
2.0 SQUARE WAVE 20
1.0 10
0 0
70 80 90 100 110 120 130 140 150 160 170 0 10 20 30 40 50 60 70 80 90 100
TC, CASE TEMPERATURE (°C) VR, REVERSE VOLTAGE (VOLTS)
Figure 9. Current Derating, Case Figure 10. Typical Capacitance
http://onsemi.com
4
MURS320T3, MURS340T3, MURS360T3
PACKAGE DIMENSIONS
SMC
PLASTIC PACKAGE
CASE 403−03
ISSUE D
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
A Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. D DIMENSION SHALL BE MEASURED WITHIN
DIMENSION P.
4. 403−01 THRU −02 OBSOLETE, NEW STANDARD
403−03.
D B
INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.260 0.280 6.60 7.11
B 0.220 0.240 5.59 6.10
C 0.075 0.095 1.90 2.41
D 0.115 0.121 2.92 3.07
H 0.0020 0.0060 0.051 0.152
J 0.006 0.012 0.15 0.30
K 0.030 0.050 0.76 1.27
C P 0.020 REF 0.51 REF
S 0.305 0.320 7.75 8.13
J H
K P
SOLDERING FOOTPRINT*
4.343
0.171
3.810
0.150
2.794
0.110
SCALE 4:1 inches
mm
http://onsemi.com
5
MURS320T3, MURS340T3, MURS360T3
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com MURS320T3/D
6