SB 302 Tunnel

Spare parts list

Hydraulic breakers
SB 302 Tunnel s/n BES083100 –

© 2022 Construction Tools PC AB | No. 9800 1882 01| 2022-04-07

General information
This spare parts list applies to the following:

Part number Description

8460030063 SB 302 Tunnel

Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
Any unauthorized use or copying of the contents or any part thereof is
prohibited. This applies in particular to trademarks, model denominations, part
numbers, and drawings.

Instructions for use

This spare parts list contains no safety regulations and is merely intended to
assist in the ordering of spare parts.
For information about operating, servicing, or repairing, the relevant Safety
and operating instructions must be consulted at all costs.
Please observe the safety instructions listed in the relevant Safety and operating
instructions!

I
Service, repair and wear part kits
Label kit 1
Seal kit 3
Lower hammer part kit 5
Accumulator repair kit 7

Mechanical
Spare part list 9
Tightening torque 13
Dimensions (mm) 15
Assembly instruction 16

Options and accessories

Working Tools ClassicLine 18
Optional parts - Restrictor, complete 21
Optional parts - Bushing oversize, complete 23
Optional equipment 25
Hydraulic hoses 27

Annex
Environmental Product Compliance - REACH Declaration 29
DocMine SB 302 Tunnel s/n BES083100 -

Service, repair and wear part kits Label kit

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:10 UTC 2022
1
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3382070108 Label kit 1

2 - Product label SB302 2

3 3115263000 SAFETY LABEL 1

4 3115262900 SAFETY LABEL 1

5 3310132718 Noise level label 1

6 3315254600 AEM sign 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:10 UTC 2022
2
DocMine SB 302 Tunnel s/n BES083100 -

Service, repair and wear part kits Seal kit

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:10 UTC 2022
3
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3382070102 Seal kit 1

- 3315325000 SCRAPER RING 1

- 0663212000 O-RING 1

- 0661100024 SEAL WASHER 1

- 3115329002 SEAL RING 1

- 0663210617 O-RING 1

- 0663210669 O-RING 1

- 0663211400 O-RING 1

- 0663990031 SEAL RING 9

- 0663211444 O-RING 2

- 0663210421 O-RING 2

- 0663212141 O-RING 2

- 0661200401 BACK-UP RING 1

- 0665090014 SEAL RING 2

- 3315336700 PLUG 1

- 0665909957 Wiper 1

- 0665070137 PISTON ROD SEAL 1

- 0665070146 PISTON ROD SEAL 1

- 3315280800 VALVE RUBBER 1

- 0663210785 O-ring 1

- 0663210713 O-ring 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:10 UTC 2022
4
DocMine SB 302 Tunnel s/n BES083100 -

Service, repair and wear part kits Lower hammer part kit

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:11 UTC 2022
5
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3382070104 Lower hammer part kit 1

2 3315434260 Bushing standard, complete 1

3 - BUSHING 1

4 3315325000 SCRAPER RING 1

5 0663210617 O-RING 1

6 3315301400 STOP RING 1

7 3315203110 Lock pin 1

8 3315203010 Tool retainer 2

9 3315141900 LOCK BUFFER 1

10 - Chisel paste cartridge 400 g 1

11 0108110322 Spring pin 1

12 3315434900 Bushing pin 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:11 UTC 2022
6
DocMine SB 302 Tunnel s/n BES083100 -

Service, repair and wear part kits Accumulator repair kit

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:11 UTC 2022
7
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3315348790 ACCUM.REP.KIT 1

- 3315303500 COIL SPRING 1

- 3315400700 Diaphragm support 1

- 3315235000 DIAPHRAGM 1

- 3115329002 SEAL RING 1

- 0663212000 O-RING 1

- 3315366000 VALVE 1

- 0663211400 O-RING 1

- 0101414000 PIN 1

- 0211196534 HEX SOCK. SCREW 8 A

- 0686371805 PLUG 1

Comments for Page: Accumulator repair kit

(L)OCAL REMARKS

A | Screw with extra high fatigue strength.

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:11 UTC 2022
8
DocMine SB 302 Tunnel s/n BES083100 -

Mechanical Spare part list

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:12 UTC 2022
9
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 - Breaker body 1

2 3315434260 Bushing standard, complete 1

3 - BUSHING 1

4 3315353600 Scraper ring 1

5 0663210617 O-RING 1

6 3315301400 STOP RING 1

7 0686644207 PLUG 4 B

8 3315395200 Water Nossle 2

9 3315434900 Bushing pin 1

10 3315203110 Lock pin 1

11 3315141900 LOCK BUFFER 1

12 3315203010 Tool retainer 2

13 0686371801 PLUG 4 C

14 3315303500 COIL SPRING 1

15 3315400700 Diaphragm support 1

16 3315235000 DIAPHRAGM 1

17 3315348700 ACCUMULAT.HOUSE 1

18 0211196534 HEX SOCK. SCREW 8 D

19 0686371805 PLUG 1 E

20 3315366000 VALVE 1

21 0663212000 O-RING 1

22 3115329002 SEAL RING 1

23 0663211400 O-RING 1

24 0101414000 PIN 1

25 3315365800 PRESS.REL.VALVE 1 J

26 - Pressure relief valve 1

27 0663212141 O-RING 1

28 0663210421 O-RING 1

29 0661200401 BACK-UP RING 1

30 0580001845 Nipple, complete 1 F

31 - NIPPLE 1 G

32 0664000004 SEAL RING 1

33 0211110349 Screw, M14 x 65 mm 2 I

34 3361353486 Cap 2

35 0665090014 SEAL RING 2

36 3315336700 PLUG 1

37 3363070299 Grease nipple, ISO 7-R 1/4 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:12 UTC 2022
10
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

38 3176634800 NIPPLE 1

39 3176542900 CAP 1

40 3315369467 RESTRICTION SET 1 H

41 - Restrictor, Ø 6.7 mm, Ø 0.26 in. 1

42 0663210421 O-RING 1

43 0663212141 O-RING 1

44 - Restrictor plug 1

45 3315277600 SLIDE 1

46 0663211444 O-RING 2

47 3315352013 Valve cover 1

48 0665909957 Wiper 1

49 0665070137 PISTON ROD SEAL 1

50 0663990031 SEAL RING 9

51 0663210669 O-RING 1

52 3315301700 LINER 1

53 3315302110 Piston 1

54 0665070146 PISTON ROD SEAL 1

55 3315302000 BACK HEAD 1

56 3315244881 CHECK VALVE 1

57 - CHECK VALVE 1

58 3315280800 VALVE RUBBER 1

59 3315431201 Hexagon bolt 8

60 3315356600 BASE PLATE 1

61 3315365360 SCREW SET 1

62 - SCREW 8

63 - Nut, M16 8

64 3382070107 Wear plate, complete 1

65 Wear plate 1

66 0333520027 Lock washer 6

67 3315431101 Hexagon socket screw 6

68 0663210785 O-ring 1

69 0663210713 O-ring 1

70 3315434900 Bushing pin 1

71 0108110322 Spring pin 1

72 3315239700 DUST COVER 1

73 3315264100 FRONT SHIELD 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:12 UTC 2022
11
DocMine SB 302 Tunnel s/n BES083100 -

Comments for Page: Spare part list

(L)OCAL REMARKS

A | For oversize bushings, see section "Bushing oversize, complete".

B | VSTI R 1/4 - ED

C | VSTI R 3/8 - ED

D | Screw with extra high fatigue strength.

E | VSTI R 1/8 - ED

F | There are two "Nipple, complete" on the machine.

G | 1 3/16 - 12UN G 3/4 A

H | For more restrictors, see section "Restrictor, complete".

I | Screw with extra high fatigue strength.

J | CAS No. see chapter "Environmental Product Compliance - REACH Declaration"

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:12 UTC 2022
12
DocMine SB 302 Tunnel s/n BES083100 -

Mechanical Tightening torque

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:13 UTC 2022
13
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

7 - Plug - 30 Nm - A

13 - Hexagon socket plug - 80 Nm - B

18 - Charge valve - 27 Nm -

19 - Hexagon socket screw - 120 Nm - C

20 - Plug - 20 Nm -

26 - Pressure relief valve - 80 Nm -

31 - Nipple - 120 Nm -

33 - Screw - 180 Nm

37 - Grease nipple - 30 Nm -

44 - Restrictor plug - 80 Nm -

57 - Check valve - 30 Nm - J

59 - Hexagon head screw - 180 Nm - K

63 - Nut - 200 Nm - L

64 - Hexagon socket screw - 180 Nm - M

65 - Hexagon socket screw - 240 Nm -

Comments for Page: Tightening torque

LOCTITE is a registered trademark of Henkel Corporation. 243 is a trademark of Henkel Corporation. Molykote is a registered trademark of Dow

Corning Corporation.

(L)OCAL REMARKS

A | LOCTITE® 243™

B | LOCTITE® 243™

C | Molykote®

J | LOCTITE® 243™

K | Molykote®

L | Molykote®

M | Molykote®

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:13 UTC 2022
14
DocMine SB 302 Tunnel s/n BES083100 -

Mechanical Dimensions (mm)

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:13 UTC 2022
15
DocMine SB 302 Tunnel s/n BES083100 -

This page intentionally left blank

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:13 UTC 2022
16
DocMine SB 302 Tunnel s/n BES083100 -

Mechanical Assembly instruction

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:14 UTC 2022
17
DocMine SB 302 Tunnel s/n BES083100 -

This page intentionally left blank

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:14 UTC 2022
18
DocMine SB 302 Tunnel s/n BES083100 -

Options and accessories Working Tools ClassicLine

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:14 UTC 2022
19
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3083342704 Moil point Tunnel 1

2 3083319511 Moil point 1

3 3315264100 FRONT SHIELD 1

4 3315239700 DUST COVER 1

5 3083342705 Chisel cross Tunnel 1

6 3083319512 Chisel (cross) 1

7 3315264100 FRONT SHIELD 1

8 3315239700 DUST COVER 1

9 3083342706 Blunt tool Tunnel 1

10 3083319510 Blunt tool 1

11 3315264100 FRONT SHIELD 1

12 3315239700 DUST COVER 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:14 UTC 2022
20
DocMine SB 302 Tunnel s/n BES083100 -

Options and accessories Optional parts - Restrictor, complete

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:15 UTC 2022
21
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3315369454 Restrictor, complete (optional) 1

2 - Restrictor, Ø 5.4 mm, Ø 0.21 in. 1

3 0663210421 O-RING 1

4 0663212141 O-RING 1

5 3315369200 Restrictor plug 1

6 3315369460 Restrictor, complete 1

10 3315369200 Restrictor plug 1

7 -- Restrictor, Ø 6.0 mm, Ø 0.24 in. 1

8 0663210421 O-RING 1

9 0663212141 O-RING 1

11 3315369464 RESTRICTION SET 1

15 -- Restrictor plug 1

14 0663212141 O-RING 1

13 0663210421 O-RING 1

12 -- Restrictor, Ø 6.4 mm, Ø 0.25 in. 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:15 UTC 2022
22
DocMine SB 302 Tunnel s/n BES083100 -

Options and accessories Optional parts - Bushing oversize, complete

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:15 UTC 2022
23
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

1 3315434261 Bushing press fit oversize, complete 1

2 - Bushing, Ø111.5 mm, Ø4.39 in. 1

3 3315325000 SCRAPER RING 1

4 0663210617 O-RING 1

5 3315434262 Bushing press fit oversize, complete 1

6 - Bushing, Ø113 mm, Ø4.4 in. 1

7 0663210617 O-RING 1

8 3315325000 SCRAPER RING 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:15 UTC 2022
24
DocMine SB 302 Tunnel s/n BES083100 -

Options and accessories Optional equipment

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:16 UTC 2022
25
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

- 3315303891 ContiLube II Micro 1

- 0909107100 LUBRICAT.GUN 1

- 3363122354 BIO Chisel paste, 20 x 150 g 1

- 3363122355 BIO Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) 1

- 3363122357 BIO Chisel paste container (15 kg) 1

- 3363122358 BIO Chisel paste container (45 kg) 1

- 3360920415 Filling device for accumulator 1

- 3363094459 Nipple, for charging the accumulator 1

- 3361329803 Filling hose for charging the accumulator 1

- 3315353100 Bushing wear controller 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:16 UTC 2022
26
DocMine SB 302 Tunnel s/n BES083100 -

Options and accessories Hydraulic hoses

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:16 UTC 2022
27
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

- 3360995717 Hose, both ends 18 L(M26 x 1.5) length 1500 mm 2

- 3362235159 Hose, both ends 18 L(M26 x 1.5) length 2000 mm 2

- 3363083313 Hose, both ends 18 L(M26 x 1.5) length 2400 mm 2

- 3363098019 Additional fitting kit( needed to fit two hoses to the hydraulic breaker) 1

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:16 UTC 2022
28
DocMine SB 302 Tunnel s/n BES083100 -

Annex Environmental Product Compliance - REACH Declaration

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:16 UTC 2022
29
DocMine SB 302 Tunnel s/n BES083100 -

Item Part No. Name Qty L

25 - Pressure relief valve, complete, Part No. 3315365800 - CAS No. 7439-92-1 -

Comments for Page: Environmental Product Compliance - REACH Declaration

EU REACH Candidate List substances present in product listed above.

Refer to the DocMine web page for most up-to-date information. The printed information might be outdated.
Thu Apr 07 05:06:18 UTC 2022
30
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers, and
drawings.

epiroc.com