Scribd Logo
Upload

Welcome to Scribd!

  • SEPLOS BMS CAN Protocoll V1.0

    Uploaded by

    carlospardo.ese
    46 views6 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    46 views6 pages

    SEPLOS BMS CAN Protocoll V1.0

    Uploaded by

    carlospardo.ese

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 6

    SEPLOS CANBUS Protocol V1.0 www.seplos.

    com

    Shenzhen Seplos Technology Co., LTD


    SEPLOS CANBUS Protocol V1.0 www.seplos.com

    CANBUS:
    Standard frame, communication rate: 500kbps, data transmission cycle: 1s.
    Inverter reply every second: 0x305: 00-00-00-00-00-00-00-00

    Compatible protocols:
    CANBUS Protocol compatible with Pylontech V1.3 and Goodwe V1.5.

    Set DIP address for parallel packs

    Slave pack address:


    DIP Switch
    Address Remark
    #1 #2 #3 #4
    1 ON OFF OFF OFF PACK 1
    2 OFF ON OFF OFF PACK 2
    3 ON ON OFF OFF PACK 3
    4 OFF OFF ON OFF PACK 4
    5 ON OFF ON OFF PACK 5
    6 OFF ON ON OFF PACK 6
    7 ON ON ON OFF PACK 7
    8 OFF OFF OFF ON PACK 8
    9 ON OFF OFF ON PACK 9
    10 OFF ON OFF ON PACK 10
    11 ON ON OFF ON PACK 11
    12 OFF OFF ON ON PACK 12
    13 ON OFF ON ON PACK 13
    14 OFF ON ON ON PACK 14
    15 ON ON ON ON PACK 15

    1
    SEPLOS CANBUS Protocol V1.0 www.seplos.com

    Master pack address:


    Parallel DIP Switch
    Remark
    packs #5 #6 #7 #8
    2 ON OFF OFF OFF 2 packs in parallel
    3 OFF ON OFF OFF 3 packs in parallel
    4 ON ON OFF OFF 4 packs in parallel
    5 OFF OFF ON OFF 5 packs in parallel
    6 ON OFF ON OFF 6 packs in parallel
    7 OFF ON ON OFF 7 packs in parallel
    8 ON ON ON OFF 8 packs in parallel
    9 OFF OFF OFF ON 9 packs in parallel
    10 ON OFF OFF ON 10 packs in parallel
    11 OFF ON OFF ON 11 packs in parallel
    12 ON ON OFF ON 12 packs in parallel
    13 OFF OFF ON ON 13 packs in parallel
    14 ON OFF ON ON 14 packs in parallel
    15 OFF ON ON ON 15 packs in parallel

    CAN ID: 0X359


    Byte 0 Protection - Table 1
    Byte 1 Protection - Table 2
    Byte 2 Warnings - Table 3
    Byte 3 Warnings - Table 4
    Byte 4 Quantity of packs in parallel
    Byte 5
    Byte 6
    Byte 7 Online address of packs in parallel - Table 5

    Table 1 Protection
    Bit 0
    Bit 1 High voltage of battery
    Bit 2 Low voltage of battery
    Bit 3 Battery high temperature
    Bit 4 Battery low temperature
    Bit 5
    Bit 6
    Bit 7 Discharge over current

    Table 2 Protection
    Bit 0 Battery charge over current
    Bit 1
    Bit 2

    2
    SEPLOS CANBUS Protocol V1.0 www.seplos.com

    Bit 3
    Bit 4
    Bit 5
    Bit 6
    Bit 7

    Table 3 Warnings
    Bit 0
    Bit 1 Battery high voltage
    Bit 2 Battery low voltage
    Bit 3 Battery high temperature
    Bit 4 Battery low temperature
    Bit 5
    Bit 6
    Bit 7 Discharge over current

    Table 4 Warnings
    Bit 0 Charge over current of battery
    Bit 1
    Bit 2
    Bit 3 Internal communication failure
    Bit 4 Cell failure
    Bit 5
    Bit 6
    Bit 7

    Table 5 Online address of pack in parallel


    Bit 0 0 means DIP 0 out-of-line, 1 means DIP 0 online
    Bit 1 0 means DIP 1 out-of-line, 1 means DIP 1 online
    Bit 2 0 means DIP 2 out-of-line, 1 means DIP 2 online
    Bit 3 0 means DIP 3 out-of-line, 1 means DIP 3 online
    Bit 4 0 means DIP 4 out-of-line, 1 means DIP 4 online
    Bit 5 0 means DIP 5 out-of-line, 1 means DIP 5 online
    Bit 6 0 means DIP 6 out-of-line, 1 means DIP 6 online
    Bit 7 0 means DIP 7 out-of-line, 1 means DIP 7 online

    CAN ID: 0X351


    Byte 0
    Battery charge voltage, 16 bits unsigned int, Unit: 0.1V
    Byte 1
    Byte 2
    Charge current limit, 16 bits signed int, 2`s Byte 3Complement, Unit: 0.1A
    Byte 3

    3
    SEPLOS CANBUS Protocol V1.0 www.seplos.com

    Byte 4
    Discharge current limit, 16 bits signed int, 2`s Byte 3Complement, Unit: 0.1A
    Byte 5
    Byte 6
    Discharge voltage, 16 bits unsigned int, Unit: 0.1V
    Byte 7

    CAN ID: 0X355


    Byte 0 SOC of single module or average value of system
    Byte 1 16 bits unsigned int, Unit: 1%
    Byte 2 SOH of single module or average value of system
    Byte 3 16 bits unsigned int, Unit: 1%
    Byte 4
    Byte 5
    Byte 6
    Byte 7

    CAN ID: 0X356


    Byte 0
    Battery Voltage, 16 bits signed int, 2`s Complement, Unit: 0.01V
    Byte 1
    Byte 2
    Battery Current, 16 bits signed int, 2`s Complement, Unit: 0.1A
    Byte 3
    Byte 4
    Battery Temperature, 16 bits signed int, 2`s Complement, Unit: 0.1℃
    Byte 5
    Byte 6
    Byte 7

    CAN ID：0x35C
    Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
    Byte 0 Table 5

    Table 5
    Bit 0
    Bit 1
    Bit 2
    Bit 3
    Bit 4 Request force-charge II
    Bit 5 Request force-charge I
    Bit 6 Discharge-enable
    Bit 7 Charge-enable

    CAN ID: 0X70


    Byte 0 Maximum cell temperature,
    Byte 1 16bit signed int, unit :0.1degC

    4
    SEPLOS CANBUS Protocol V1.0 www.seplos.com

    Byte 2 Minimum cell temperature,


    Byte 3 16bit signed int, unit :0.1degC
    Byte 4 Maximum cell voltage,
    Byte 5 16bit signed int, unit :0.1degC
    Byte 6 Minimum cell voltage,
    Byte 7 16bit signed int, unit :0.1degC

    CAN ID: 0X371


    Byte 0 Maximum cell temperature ID
    Byte 1 16bit signed int, unit :NA
    Byte 2 Minimum cell temperature ID
    Byte 3 16bit signed int, unit :NA
    Byte 4 Maximum cell voltage ID
    Byte 5 16bit signed int, unit :NA
    Byte 6 Minimum cell voltage ID
    Byte 7 16bit signed int, unit :NA

    CAN ID: 0X35E


    Byte 0
    Manufacturer Energy ASCII
    Byte 1

    Note: Data 0 means low bytes. Data 1 means high bytes.

    ©2020 SEPLOS Technology


    Building B,Yajiashi Industrial Park, No. 89 Huating Road, Dalang Longhua New District, Shenzhen
    China. 518109
    TEL : (86) 13286686628
    E-mail: [email protected]
    http://www.li-ionbatterys.com/ http://www.seplos.com

    You might also like