Professional Documents
Culture Documents
Fact Finding Techniques
Fact Finding Techniques
the facts when expressed in quantitative form are termed as data. The success of any project is depended upon the accuracy of available data. Accurate information can be collected with help of certain methods/ techniques. These specific methods for finding information of the system are termed as fact finding techniques. Interview, Questionnaire, Record View and Observations are the different fact finding techniques used by the analyst. The analyst may use more than one technique for investigation. Interview This method is used to collect the information from groups or individuals. Analyst selects the people who are related with the system for the interview. In this method the analyst sits face to face with the people and records their responses. The interviewer must plan in advance the type of questions he/ she is going to ask and should be ready to answer any type of question. He should also choose a suitable place and time which will be comfortable for the respondent. The information collected is quite accurate and reliable as the interviewer can clear and cross check the doubts there itself. This method also helps gap the areas of misunderstandings and help to discuss about the future problems. Structured and unstructured are the two sub categories of Interview. Structured interview is more formal interview where fixed questions are asked and specific information is collected whereas unstructured interview is more or less like a casual conversation where in-depth areas topics are covered and other information apart from the topic may also be obtained.
Questionnaire It is the technique used to extract information from number of people. This method can be adopted and used only by an skillful analyst. The Questionnaire consists of series of questions framed together in logical manner. The questions are simple, clear and to the point. This method is very useful for attaining information from people who are concerned with the usage of the system and who are living in different countries. The questionnaire can be mailed or send to people by post. This is the cheapest source of fact finding.
Record View The information related to the system is published in the sources like newspapers, magazines, journals, documents etc. This record review helps the analyst to get valuable information about the system and the organization. Observation Unlike the other fact finding techniques, in this method the analyst himself visits the organization and observes and understand the flow of documents, working of the existing system, the users of the system etc. For this method to be adopted it takes an analyst to perform this job as he knows which points should be noticed and highlighted. In analyst
may observe the unwanted things as well and simply cause delay in the development of the new system. Reference
http://systemanalysisanddesign.blogspot.com/2008/11/fact-finding-techniques.html
User Requirements Fact Finding Techniques There are five main fact finding techniques that are used by analysts to investigate requirements. Here we describe each of them in the order that they might be applied in a system development project, and for each one we explain the kind of information that you would expect to gain from its use, its advantages and disadvantages, and the situations in which it is appropriate to use it. 1. Background Reading If an analyst is employed within the organization that is the subject of the fact gathering exercise, then it is likely that he or she will already have a good understanding of the organization and its business objectives. If, however, he or she is going in as an outside consultant, then one of the first tasks is to try to gain an understanding of the organization. Background reading or research is part of that process. The kind of documents that are suitable sources of information include the following Although reading company reports may provide the analyst with information about the organization's mission, and so possibly some indication of future requirements, this technique mainly provides information about the current system.
Company reports
organization charts, policy manuals, job descriptions, reports and documentation of existing systems.
Advantages and disadvantages Background reading helps the analyst to get an understanding of the organization before meeting the people who work the It also allows the analyst to prepare for other types of fact finding, for example, by being aware of the business objectives of the organization + Documentation on the existing system may provide formally defined information requirements for the current system. - Written documents often do not match up to reality; they may be out of date or they may reflect the official policy on matters that are dealt with differently in p
Appropriate Situation Background reading is appropriate for projects where the analyst is not familiar with the organization being investigated. It is useful in the initial stages of investigation.
2.Interviewing Interviewing is probably the most widely used fact finding technique; it is also the one that requires the most skill and sensitivity. Because of this, we have included a set of guidelines on interviewing that includes some suggestions about etiquette
Conducting an interview requires good planning, good interpersonal skills and an alert and responsive frame of mind. These guidelines cover the points you should bear in mind when planning and conducting an interview Before the Interview You should always make appointments for interviews in advance. You should give the interviewee information' about the likely duration of the interview view and the subject of the interview. Being interviewed takes people away from their normal work. Make sure that they feel that it is time well spent. It is conventional to obtain permission from an interviewee's line manager before
interviewing them. Often the analyst interviews the manager first and uses the opportunity to get this permission. In large projects, an interview schedule should be drawn up showing who is to be interviewed, how often and for how long. Initially this will be in terms of the job roles of interviewees rather than named individuals. It may be the manager who decides which individual you interview in a particular role. Have a clear set of objectives for the interview. Plan your questions and write them down. Some people write the questions with space between them for the replies. Make sure your questions are relevant to the interviewee and his or her job
At the Start of Interview At the start of the interview Introduce yourself and the purpose of the inter Arrive on time for interviews and stick to the planned timetable-do not over-run. Ask the interviewee if he or she minds you taking notes or tape-recording the interview. Even f you tape-record an interview, you are advised to take notes. Machines can fail! Your notes also allow you to refer back to what has been said during the course of the interview and follow up points of interest. Remember that people can be suspicious of outside consultants who come in with clipboards and stopwatches. The cost-benefit analyses of many information systems justify the investment in terms of savings in jobs! During the interview Take responsibility for the agenda. You should control the direction of the interview. This should be done in a sensitive way. If the interviewee is getting away from the subject, bring them back to the point. If what they are telling you is important, then say that you will come back to it later and make a note to remind yourself to do so. Use different kinds of question to get different types of information. Questions can be open-ended-'Can you explain how you complete a timesheet?'-or closed-'How many staff use this system?'. Do not, however, ask very open-ended questions such as 'Could you tell me what you do?' >Listen to what the interviewee says and encourage him or her to expand on key points. Keep the focus positive if possible. Make sure you have understood answers by summarizing them back to the interviewee. Avoid allowing the interview to degenerate into a session in which the interviewee 4
complains about everyone and everything. You may be aware of possible problems in the existing system, but you should avoid prejudging issues by asking questions that focus too much on problems. Gather facts. Be sensitive about how you use information from other interviews that you or
your colleagues have already conducted, particularly if comments were negative or critical. Use the opportunity to collect examples of documents that people use in their work, ask if they mind you having samples of blank forms and photocopies of completed paperwork. After the interview Thank the interviewee for their time. Make an appointment for a further interview if it is necessary. Offer to provide them with a copy of your notes of the interview for them to check that you have accurately recorded what they told you. Transcribe your tape or write up your notes as soon as possible after the interview while
the content is still fresh in your mind. If you said that you would provide a copy of your notes for checking then send it to the interviewee as soon as possible. Update your notes to reflect their comments.
A systems analysis interview is a structured meeting between the analyst and an interviewee who is usually a member of staff of the organization being investigated. The interview may be one of a series of interviews that range across different areas of the interviewee's work or that probe in progressively greater depth about the tasks undertaken by the interviewee. The degree of structure may vary: some interviews are planned with a fixed set of questions that the interviewer works through, while others are designed to cover certain topics but will be open-ended enough to allow the interviewer to pursue interesting facts as they emerge. The ability to respond flexibly to the interviewee's responses is one of the reasons why interviews are so widely used. Interviews can be used to gather information from management about their objectives for the organization and for the new information system, from staff about their existing jobs and their information needs, and from customers and members of the public as possible users of systems. While conducting an interview, the analyst can also use the opportunity to gather documents that the interviewee uses in his or her work. It is usually assumed that questionnaires are used as a substitute for interviews when potential interviewees are geographically dispersed in branches and offices around the world. The widespread use of desktop video conferencing may change this and make it possible to interview staff wherever they are. Even then, questionnaires can reach more people. Interviewing different potential users of a system separately can mean that the analyst is given different information by different people. Resolving these differences later can be difficult and time-consuming. One alternative is to use group interviews in order to get the users to reach a consensus on issues. Dynamic Systems Development Method (DSDM) is a method of carrying out systems development in which group discussions are used (Stapleton, 1997). These discussions are run as workshop for knowledgeable users with a facilitator who aims to get the users to pool their knowledge and reach a consensus on the priorities of the development project.
Advantages and disadvantages Personal contact allows the analyst to be responsive and adapt to what the user says. Because of this, interviews produce high quality informationus + The analyst can probe in greater depth about the person's work than can be achieve with other methods. + If the interviewee has nothing to say, the interview can be terminate - Interviews are time-consuming and can be the most costly form of fact gathering - Interview results require the analyst to work on them after the interview: the transcription of tape recordings or writing up of notes. - Interviews can be subject to bias if the interviewer has a closed mind about th problem. - If different interviewees provide conflicting information, it can be difficult to resolve later Appropriate situations Interviews are appropriate in most projects. They can provide information in depth about the existing system and about people's requirements from a new system 3. Observation Watching people carrying out their work in a natural setting can provide the analyst with a better understanding of the job than interviews, in which the interviewee will often concentrate on the normal aspects of the job and forget the exceptional situations and interruptions which occur and which the system will need to cope with. Observation also allows the analyst to see what information people use to carry out their job. This can tell you about the documents they refer to, whether they have to get up from their desks to get information, how well the existing system handles their needs. One of the authors has observed staff using a tele-sales system where there was no link between the enquiry screens for checking the availability of stock and the data entry screens for entering an order. These tele-sales staff kept a pad of scrap paper on the desk and wrote down the product codes for all the items they had looked up on the enquiry screens so that they could enter them into the order processing screens. This kind of information does not always emerge from interviews. People are not good at estimating quantitative data, such as how long they take to deal with certain tasks, and observation with a stopwatch can give the analyst plentiful quantitative data, not just about typical times to perform a task but also about the statistical distribution of those times. In some cases where information or items are moving through a system and being dealt with by many people along the way, observation can allow the analyst to follow the entire process through from start to finish. This type of observation might be used in an organization where orders are taken over the telephone, passed to a warehouse for picking, packed and despatched to the customer. The analyst may want to follow a series of transactions through the system to obtain an overview of the processes involved. Observation can be an open-ended process in which the analyst simply sets out to observe what happens and to note it down, or it can be a closed process in which the analyst wishes to observe specific aspects of the job and draws up an observation schedule or form on which to record data. This can include the time it takes to carry out a task, the types of task the person is performing or factors such as the number of errors they make in using the existing system as a baseline for usability design.
Advantages and disadvantages Observation of people at work provides first hand experience of the way that the current system operates. +Data are collected in real time and can have a high level of validity if care is taken in how the technique is used. + Observation can be used to verify information from other sources or to look for exceptions to the standard procedure. + Baseline data about the performance of the existing system and of users can be collected. - Most people do not like being observed and are likely to behave differently from the way in which they would normally behave. This can distort findings and affect the validity. - Observation requires a trained and skilled observer for it to be most effective. - There may be logistical problems for the analyst, for example, if the staff to be observed work shifts or travel long distances in order to do their job. - There may also be ethical problems if the person being observed deals with sensitive private or personal data or directly with members of the public, for example in a doctor's surgery Appropriate situations Observation is essential for gathering quantitative data about people's jobs. It can verify or disprove assertions made by interviewees, and is often useful in situations where different interviewees have provided conflicting information about the way the system works. Observation may be the best way to follow items through some kind of process from start to finish. 4. Document sampling Document sampling can be used in two different ways. First, the analyst will collect copies of blank and completed documents during the course of interviews and observation sessions. These will be used to determine the information that is used by people in their work, and the inputs to and outputs from processes which they carry out, either manually or using an existing computer system. Ideally, where there is an existing system, screen shots should also be collected in order to understand the inputs and outputs of the existing system. Figure below shows a sample document collected from Agate- our case study company Agate Campaiogn Summary Date
23rd February 2002 Yellow Partridge Park Road Client Workshops Jewellery Quarter Birmingham B2 3DT U.K Campaign Spring Collection 2002 Billing GBP Currency
Item
Curr Amount
Rate
Billing Amount
Advert preparation: photography, artwork layout etc. Placement French Vogue Placement Portuguese Vogue Placement US Vogue Total
GBP 15,000.00 1
15,000.00
EUR 6500,00 1.61 4,037.27 EUR 55000,00 1.61 3,416.15 USD 17,000.00 1.44 11,805.56 34,258.98
Second, the analyst may carry out a statistical analysis of the documents in order to find out about patterns of data. For example, many documents such as order forms contain a header section and a number of lines of detail. (The sample document in Figure 6.1 shows this kind of structure.) The analyst may want to know the distribution of the number of lines in an order. This will help later in estimating volumes of data to be held in the system and in deciding how many lines should be displayed on screen at one time. While this kind of statistical sampling can give a picture of data volumes, the analyst should be alert to seasonal patterns of activity, which may mean that there are peaks and troughs in the amount of data being processed.
Advantages and disadvantages Can be used to gather quantitative data, such as the average number of lines on an invoice. Can be used to find out about error rates in paper documents. - If the system is going to change dramatically, existing documents may not reflect how it will be in future Appropriate situation, The first type of document sampling is almost always appropriate. Paper-based documents give a good idea of what is happening in the current system. They also provide supporting evidence for the information gathered from interviews or observation. The statistical approach is appropriate in situations where large volumes of data are being processed, and particularly where error rates are high, and a reduction in errors is one of the criteria for usability.
Questionnaires Questionnaires are a research instrument that can be applied to fact finding in system development projects. They consist of a series of written questions. The questionnaire designer usually limits the range of replies that respondents can make by giving them a choice of options. (Figure below shows some of the types of question.) YES/NO questions only give the respondent two options. (Sometimes a DON'T KNOW option is needed as well.) If there are more options, the multiple choice type of question is often used when the answer is factual, whereas scaled questions are used if the answer involves an element of subjectivity. Some questions do not have a fixed number of responses, and must be left open-ended for the respondent to enter what they like. Where the respondent has a limited number of choices, these are usually coded with a number, which speeds up data entry if the responses are to be analysed by computer software. If you plan to use questionnaires for requirements gathering, they need very careful design.
Advantages and disadvantages An economical way of gathering data from a large number of people. If the questionnaire is well designed, then the results can be analysed easily, possibly by computer.
Good questionnaires are difficult to construct. There is no automatic mechanism for follow up or probing more deeply, although it is possible to follow up with an interview by telephone or in person if necessary. Postal questionnaires suffer from low response rates. Types of question used in questionnaires
Yes/No Question Do you print reports from the existing System?(please circle the appropriate answer)
Yes a) 1-10
No
Multiple Choice Questions How many new clients do you obtain in a year ?(please tick one box only)
Scaled Questions How satisfied are you with the response time of the stock update? (please circle one options)
Open -ended Questions What additional reports would you require from the System? ----------------------------------------------------------------- ----------------------------------------------------------------- ---------------------------------------------------------------
Guidelines on Questionnaires Using questionnaires requires good planning. If you send out 100 questionnaires and they do not work, it is difficult to get respondents to fill in a second version. These guidelines cover the points you should bear in mind when using questionnaires. Coding How will you code the results? If you plan to use an optical mark reader, then the response to every question must be capable of being coded as -a mark in a box. If you expect the results to be keyed into a database for analysis, then you need to decide on the codes for each
possible response. If the questions are open-ended, how will you collate and analyse different kinds of responses? Analysis Whatever analysis you plan should be decided in advance. If you expect to carry out a statistical analysis of the responses, you should consult a statistician before you finalize the questions. Statistical techniques are difficult to apply to responses to poorly You can use a special statistical software pack a database or even a spreadsheet to analyse data. Piloting You should try out your questionnaire on a small pilot group or sample of your respondents. This enables you to find out if there are questions they do not understand, they misinterpret or they cannot answer. If you plan to analyse the data using statistical software, a database or a spreadsheet, you can create a set of trial data to test your analysis technique. Sample size and structure If you plan to use serious statistical techniques, then those techniques may place lower limits on your sample size. If you want to be sure of getting a representative sample, by age, gender, department geographical location, job grade or experience of existing systems, then that will help to determine how many people to include. Otherwise it may be down to you to choose a sensible percentage of all the possible respondents. Delivery How will you get the questionnaires to your respondents, and how will they get their replies back to you? You can post them, or use internal mail in a large organization, fax them, email them or create a web-based form on the company intranet and notify your target group by e-mail. If you use the intranet, you may want to give each respondent a special code, so that only they can complete their own questionnaire. Your respondents can then post, fax or e-mail their responses back to you.
Respondent information What information about the respondents do you want to gather at the same time as you collect their views and requirements? If you want to analyse responses by age, job type or location, then you need to include questions that ask for that information. You can make questionnaires anonymous, or you can ask respondents for their name. If the questionnaire is not anonymous, you need to think about confidentiality. People will be more honest in their replies if they can respond anonymously or in confidence. Covering letter In a covering letter you should explain the purpose and state that the questionnaire has management support. Give an estimate of the time required to fill in the questionnaire and a deadline for its return. Thank the respondents for taking part.
Structure the questionnaire carefully. Give it a title, and start with explanatory material and notes on how to complete it. Follow this with questions about the respondent (if required). Group questions together by subject. Avoid lots of instructions like 'If you answered YES to Q. 7a, now go to Q. 13.' Keep it reasonably short.
10
Return rate Not everyone will necessarily respond. You need to plan for this and either use a larger sample than you need or follow up with reminders. If you use a form on the Intranet, you should be able to identify who has not responded and e-mail them reminders. Equally, you can e-mail a thank you to those who do respond.
Feedback This needs to be handled carefully-telling everyone that 90% of the company cannot use the existing system may not go down well-but people do like to know what use was made of the response they made. They may have spent half an hour filling in your questionnaire, and they will expect to be informed of the outcome. Appropriate Situations Questionnaires are most useful when the views or knowledge of a large number of people need to be obtained or when the people are geographically dispersed, for example, in a company with many branches or offices around the country or around the world. Questionnaires are also appropriate for information systems that will be used by the general public, and where the analyst needs to get a picture of the types of user and usage that the system will need to handle
http://www.itworld2.com/frmfft3.aspx
11