Sic Marking
Sic Marking
WITH e6 e7 e8 e9 controller
Features:
An e6 or e8 controller with V5 software
Or
An e7 or e9 controller with V1 software and the adapting cable 3 100 064
Reader’s set up :
Scan the following codes respecting the order from 1 to 31
1 16
2 17
3 18
4 19
5 20
6 21
7 22
8 23
9 24
10 25
11 26
12 27
13 28
14 29
15 30
31
Statement in the marking file with the e8 controller:
The bar code reader sends the variable called BCR.
In the Edit menu, you can create marking line before and after the bar code.
To insert the encoded data in the bar code, put the cursor in the text zone and press simultaneously
the keys and to create a variable called “BCR” (for bar code reader)…
To see the complete description of the variable parameters, refer to the chapter VII ADVANCED
FUNCTIONS of the e8 start manual, paragraph 2 : “Use of the variable field”
Tests :
Codes for reading tests and transfer to the BCR of the controller.
Marking :
Scan the bar code, so the information with in the bar code appears on the controller screen.
⇒ Press the trigger of the bar code reader.