WPQ 43G Smaw-Pipe.
WPQ 43G Smaw-Pipe.
2MM
~~;=iIt=:::=::;::=:::=~==;J°~L
T 2MM-'~
12.7 MM !
Test results
Non-destructive tests Test result/report no destructive tests No.Ofr Result
Visual Examination Satisfactory IDSBE/WQTIVT42G-43G Bend test -
Radiography test Satisfactory /GT-51255 Macrograph -
Dye penetrant test Satisfactory /DP/WQT/42-43 Fracture Test -
Magt!etic l'article test - Impact test -
Ultrasonic test - Tensile test - ..
ThIS IS to attest that the welder IdentIfied above has passed the approval tests, under the supervIsIon of ClassIficatIon SocIety.
Signature: 2
Starn : ~ 4- 01- t.c,~
This Certificate is delivered within the scope of the General Conditions of DUBAI SHIPBUILDING & ENGINEERING L.L.C. Any person not a
party to the contract pursuant to which this document is delivered may not assert a claim against DUBAI SHIPBUILDING & ENGINEERING L.L.C.
for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fau lt or negligence committed
by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may
provide.
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month
Welder's Name
Identification
Nationality
WPSNo.
Test Date
VIJAY YADAV
WL 110
INDIA
DSBE043G
06-11 -2014
®
~
lVrS
-rf' ~;~ /
~
Materia ls and welding d etails
Variables Weld test derails Rallf;e of.4pproval Variables Weld test details Range ofApproval
Welding Process SMAW \ SMAW Welding Positions 6G UP ALL
Base Material Group ASTM A I 06,Gr B Pipe & Structural Backing WITHOUT WITH or WITHOUT
Grade Equivalent to
base metal mentioned
Welding Consumables E6010 & E7018-1 FNO. I T04 Welded (one /both) ONE SIDE .:;
. ONE SIDE
Type of base product PIPE PIPE & PLATE Test piece thickness 12.7mm . ~mm To Unlimited
Type of weld joint BUTT BUTT & FILLET Pipe dimension 2 19.08 mm 109.54 mm To Unlimited
Type of joint (sketch) .. - ~
2MMT
+I ~~~ 12.7 MM :
I
2 MM ~ +--;-:-
Test results
Non-destructive tests Test result/report no destructive tests No. Off Result
Visual Examination Satisfactory/DSBE/WQTIVT42G-43G Bend test -
Radiography test Satisfactoryl RT-51255 Macrograph -
Dye penetrant test Satisfactory/ DP/ WQT/42-43 Fracture Test -
Magnetic particle test - Impact test -
Ultrasonic test - Tensile test - ..
ThIS IS to attest that the we lder IdentIfied above has passed the approval tests, under the supervIsIon of ClassIficatIOn SocIety .
This Certificate is delivered within the scope of the General Conditions of DUBAI SHIPBUILD ING & ENGINEERING L.L.c. Any person not a
party to the contract pursuant to which this document is delivered may not assert a claim against DUBAI SHIPBUILDING & ENGINEERING
L.L.c. for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fault or negligence
committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which
it may provide.
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month
--
,
!
0 0
+I ~7 l2.~ MM I
,
-
"'2MM
T 2 MM---+~ .
~D_u_ba~i_S_h~
i p_b_~_ld~in~g~&~E~n~g_
i n_=_r_
in~g~L_.L
_._C~~C~la=s~s~ifi~lc~a~ti~on~S~
o~ci~e~t~~~~~~~~~~ Employe~s endoneme~~ confirm the
Designation: Q.C ENGINEER Society name : BUREAU VERlT AS validity for the following six months
(date, name, position, signature):
Surveyor name : Mr. KORAJKOVIC
Signature: Signature:
Starn :
This Certificate is delivered within the scope of the General Conditions of DUBAI SHIPBU1LDING & ENG1NEERING L.L.c. Any person not a
party to the contract pursuant to which this document is delivered may not assel1 a claim against DUBAI SH[PBUILDING & ENGINEERING
L.L.c. for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fau lt or negligence
committed by personnel of the Society or of its Agents in establishment or issuance of thi s document, and in connection with any activities for which
it may provide.
/
.,..,..~.~ ~t ~~J ~Ji" t~.l
UKAS
Iro","NAC.#\IIlN'f
SYlrtMS
DUBAI SHIPBUILDING & ENGINEERING loL.c.
001
WELDER PERFORMANCE QUALIFICATION CERTIFICATE
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month
:
,.\. \:.
.. . . +
2MMT I
~~~ 12.7 MM
I
2MM--'~
Test results
Non-destructive tests Test result/report no destructive tests No. Off Result
Visual Examination Satisfactory IDSBE/WQTIVT42G-43G Bend test -
Radiography test Satisfactory IRT-51255 Macrograph -
Dye penetrant test Satisfactory/DP/WQT/42 -43 Fracture Test -
Magnetic particle test - Impact test -
Ultrasonic test - Tensile test - ..
ThiS IS to attest that the welder Identified above has passed the approval tests , under the supervIsIOn of ClassificatIOn Society .
~D_ub~a_i_S_hi~p_bu_i~ld~in~g~&~E~n~~~n=ee=r=in~g_L_.L_._
C~~C~la~s~s~ifi~lc~a~ti~rn~l~S~o~ci~e~t~~~~~~~~~~~ Emp~ye~s endonement~ confirm the
Designation: Q.C ENGINEER Society name : BUREAU VERITAS validity for the fo llowing six months
(date, name, position, signature) :
s~rveyor name: itf;
. I ENKO RAJKO~IC
/
. Signature:
Signature : Iv I)
Starn :
. 'Y--cf ~ L..L:./r
This Certificate is delivered within the scope of the General Conditions of DUBAI SHIPBUILDING & ENGINEERING L.L.c. Any person not a
party to the contract pursuant to which this document is delivered may not assert a claim against DUBAI SHIPBUILDING & ENGINEERING
L.L.c. for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fault or negligence
committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which
it may provide.
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month
Test results
Non-destructive tests Test result/report no destructive tests No. Of( Result
Visual Examination Satisfactory/DSBE/WQTIVT42G-43G Bend test -
Radiography test Satisfactoryl RT-51255 Macrograph -
Dye penetrant test Satisfactory/ DP/ WQT/42-43 Fracture Test -
MagJ'letic ~article test - Impact test -
Ultrasonic test - Tensile test - ..
ThiS IS to attest that the welder Identified above has passed the approval tests, under the superVIsion of ClaSSIficatIOn SocIety .
Signature :
Sta~ :
This Certificate is delivered with in the scope of the General Conditions of DUBAI SHIPBUILDING ~ ENGINEERING L.L.c. Any person not a
party to the contract pursuant to which this document is delivered may not assert a claim against DUBAI SHIPBUILDING ~ ENGINEERING
L.L.c. for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fault or negligence
committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which
it may provide.
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month
~:t:;::====~==-~O~~
" 2MM-++-
12.7 MM !
. ..
Test results
Non-destructive tests Test result/report no destructive tests No. Orr Result
Visual Examination Satisfactory/DSBE/WQTIVT42G-43G Bend test -
Radiography test Satisfactoryl RT -51256 Macrograph -
Dye penetrant test Satisfactoryl DP/WQT/42-43 Fracture Test -
Magnetic particle test - Impact test -
Ultrasonic test - Tensile test - ..
ThIS IS to attest that the welder IdentIfied above has passed the approval tests, under the supervIs Ion of ClassIfication Society .
Dubai Shipbuilding & Engineering L.L.C Classification Societ Employer's endorsement to confirm the
Designation: Q.C ENGINEER Society name: BUREAU VERITAS validity for the following six months
(date, name, position, signature):
Surveyor name :M' E:
I ENKO RAJKOVLC
Signature :
Signature:
11(,- 01 "La, :s:~.
r
Starn :
This Certificate is delivered within the scope of the General Conditions of DUBAI SH IPBUiLDING & ENGINEERING L.L.C. Any person not a
party to the contract pursuant to which this document is delivered may not assert a claim against DUBAI SHIPBUILDING & ENGINEERING
L.L.c. for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgment, fault or negligence
committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which
it may provide.
/
~ .,..,..~.~ ~t L..cL..l...Gj ~J1" t ~~
~~~ DUBAI SHIPBUILDING & ENGINEERING l.l.c.
001
WELDER PERFORMANCE QUALIFICATION CERTIFICATE
Two year classification society renewal Employer's endorsement to confirm the validity for the following six month