Page 1 of 5

MATERIAL SAFETY DATA SHEET

HelioSeal™ PVS 101

Section One
Product Information

Distributor’s Name: ADCO Products, Inc Business Phone No.: 1-517-764-0334

Emergency Phone No.: 1-800-424-9300
(CHEMTREC)
Address: 4401 Page Ave, PO Box 457
Michigan Center, MI 49254

Product Name: HelioSeal™ PVS 101

Product Description: Adhesive – Black solid or paste

MSDS Preparer: ADCO Products Inc. Date Prepared: 1/22/10

Revision: 1 Replaces Date: 7/31/08

Section Two
Molecular Composition

Common Name / Chemical Name

Exposure limits Weight % CAS Number

No hazardous constituents

Section Three
Hazards Information

Hazard description: Not applicable

Section Four
First Aid Measures
After inhalation: Consult a doctor if necessary if pyrolysis vapors are inhaled.
After skin contact: After contact with the molten product, cool rapidly with cold water.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.

Product: HelioSeal PVS 101 Revision Level: 1 Date of revision: 1/22/10

HelioSeal™ PVS 101 Page 2 of 5
______________________________________________________________________

Section Five
Fire Fighting Measures
Suitable extinguishing agents:
Water spray
Alcohol resistant foam
Fire-extinguishing powder
Carbon dioxide
Special hazards caused by the material, its products of combustion or resulting gases:
May form toxic gases in case of fire.

Section Six
Accidental Release Measures

Person-related safety precautions: Ensure adequate ventilation

Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Pick up mechanically.

Section Seven
Handling and Storage

Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires:
No special measures are required when processing in the specified normal way. Keep in mind the
product’s thermal load when in storage!
Storage:
Information about storage in one common storage facility: Store away from foodstuffs.
Further information about storage conditions:
Protect from frost.
Keep receptacle tightly sealed.
Protect from heat and direct sunlight.
Store receptacle in a well ventilated area.
Store in dry conditions.

Section Eight
Exposure Controls/Personal Protection

Additional information about design of technical systems: No further data; see item 7.
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Breathing equipment: Not necessary if room is well-ventilated.
Protection of hands: Heat protection gloves
Eye protection: Safety glasses recommended if direct contact (with the product) may occur.
HelioSeal™ PVS 101 Page 3 of 5
______________________________________________________________________

Section Nine
Physical and Chemical Properties
General Information
Form: Solid
Color: Black
Odor: Characteristic
Change in condition
Melting point/Melting range: Not determined
Flash point: > 160°C (> 320°F)
Ignition temperature: Not determined
Explosion limits:
Lower: Not determined
Upper: Not determined
Density at 20°C (68°F): 1.35 g/cm³
Solubility in / Miscibility with Water: Insoluble.
Solvent content:
Organic solvents: 0 %

Section Ten
Reactivity/

Thermal decomposition / conditions to be avoided: To avoid thermal decomposition do not overheat.

Dangerous reactions: Reacts with strong oxidizing agents.
Dangerous products of decomposition: May form toxic decomposition products in case of exceeding the
specified processing temperatures over long periods of time.

Section Eleven
Toxicological Information

Acute toxicity:
Primary irritant effect:
On the skin: No irritant effect.

Section Twelve
Ecological Information

General notes: Do not allow product to reach ground water, water course or sewage system.

Section Thirteen
Disposal Considerations

RCRA Class: N. A.
Disposal Method: Not regulated by RCRA. Dispose of in compliance with state
and local regulations.
HelioSeal™ PVS 101 Page 4 of 5
______________________________________________________________________

Section Fourteen
Transportation Data

DOT Shipping Name: Not Regulated

DOT Hazard Class: N. A.
DOT Label: Non Hazardous
UN/NA Number: N. A.

Section Fifteen
Regulatory Information

- Sara
- Section 355 (extremely hazardous substances):
None of the ingredient is listed.
- Section 313 (Specific toxic chemical listings):
67-56-1 methanol
- TSCA (Toxic Substances Control Act):
All ingredients are listed.
- Proposition 65
- Chemicals known to cause cancer:
None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
- Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
- Cancerogenity categories
- EPA (Environmental Protection Agency)
None of the ingredients is listed.
- IARC (International Agency for Research on Cancer)
1333-86-4 Carbon black 2B
14807-96-6 Talc (Mg3H2(SiO3)4) 3
- NTP (National Toxicology Program)
None of the ingredients is listed.
- TLV (Threshold Limit Value established by ACGIH)
1333-86-4 Carbon black A4
14807-96-6 Talc (Mg3H2(SiO3)4) A4
- MAK (German Maximum Workplace Concentration)
1333-86-4 Carbon black 3
- NIOSH-Ca (National Institute for Occupational Safety and Health)
1333-86-4 Carbon black
- OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
- Product related hazard informations:
The product is not subject to identification regulations according to directives on hazardous materials.
Observe the general safety regulations when handling chemicals.
HelioSeal™ PVS 101 Page 5 of 5
______________________________________________________________________

Section Sixteen
Other Information

For industrial use only. Keep out of reach of children. The hazard information herein is offered solely for the
consideration of the user. Subject to his own investigation of compliance with applicable regulations. Including
the safe use of the product under every foreseeable condition.

THIS INFORMATION RELATES TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH
MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS
TO THE BEST OF OUR KNOWLEDGE AND BELIEF ACCURATE AND RELIABLE AS OF THE DATE COMPILED.
HOWEVER, NO REPRESENTATION, WARRANTY OR GUARANTEE IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE USER'S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY AND
COMPLETENESS OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE. WE DO NOT ACCEPT LIABILITY FOR
ANY LOSS OR DAMAGE THAT MAY OCCUR FROM THE USE OF THIS INFORMATION NOR DO WE OFFER WARRANTY
AGAINST PATENT INFRINGEMENT.