TYPE R33 AND R34

O-RING SEAL
Technical Specification

Typical Applications Design Features

All rotating machines for sealing gases and liquids. Centrifugal, screw • Size: For diameters from 10 to 100 mm, this seal complies with DIN
and volumetric pumps, agitators, mixers, boosters, compressors, fans. 24960, NF E 29991, EN 12756 and ISO 3069 norms with the benefits to
be shorter than L1K.
Performance Capabilities • Monobloc type seal: With its removable and clamped face this seal
is easy to fit.
• Temperature: -60° to 260°C/-75° to +500°F
• Pressure: Seal size <=100mm • Drive: The same driving device complies both type R33 and R34.
Up to 20 barg/290 psig (R33) Indifferent to rotational direction.
Up to 65 barg/940 psig (R34) • Wave Spring: Wave spring with ample axial movement to maintain
Seal size >100mm seal face contact regardless of wear, with the following advantages:
Up to 15 barg/220 psig (R33) – minimal space required
Up to 28 barg/400 psig (R34)
– important deflection
• Speed: Up to 20 m.s-1/4,000 fpm
– indifferent to rotation direction
– standard material stainless steel AISI 316, complies with the API
specification
• Wide range of O-rings: Seal equipped with choice of O-rings in
elastomers or PTFE
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

R33 Typical Arrangement

Type R33 Dimensional Data (mm) - Sizes 0100 to 1000 comply with the standards EN 12756, DIN 24960 AND ISO 3069
SEAL D D3 D4 D6 D7 D8 D9 D72 DD72 E F G L1 L1K L3 L5 L6 L7 L8 L9 R
SIZE
0100 10.0 20.0 22.0 17.0 21.0 3.0 10.5 19.3 21.0 3.0 2.5 1.5 28.0 32.5 19.5 1.5 4.0 8.5 5.0 3.75 1.0
0120 12.0 22.0 24.0 19.0 23.0 3.0 12.5 21.3 23.0 3.0 2.5 1.5 28.0 32.5 19.5 1.5 4.0 8.5 5.0 3.75 1.0
0140 14.0 24.0 26.0 21.0 25.0 3.0 14.5 23.3 25.0 3.0 2.5 1.5 28.0 35.0 19.5 1.5 4.0 8.5 5.0 3.75 1.0
0160 16.0 26.0 28.0 23.0 27.0 3.0 16.5 25.3 27.0 3.0 2.5 1.5 28.0 35.0 19.5 1.5 4.0 8.5 5.0 3.75 1.0
0180 18.0 29.0 34.0 27.0 33.0 3.0 18.5 29.6 33.0 3.0 2.5 1.5 30.5 37.5 20.5 2.0 5.0 9.0 5.0 3.75 1.5
0200 20.0 31.0 36.0 29.0 35.0 3.0 20.5 31.6 35.0 3.0 2.5 1.5 30.5 37.5 20.5 2.0 5.0 9.0 5.0 3.75 1.5
0220 22.0 33.0 38.0 31.0 37.0 3.0 22.5 33.6 37.0 3.0 2.5 1.5 30.5 37.5 20.5 2.0 5.0 9.0 5.0 3.75 1.5
0240 24.0 36.0 40.0 33.0 39.0 3.0 24.5 35.6 39.0 3.0 2.5 1.5 32.5 40.0 22.5 2.0 5.0 9.0 5.0 4.0 1.5
0250 25.0 39.0 41.0 34.0 40.0 3.0 25.8 36.6 40.0 3.0 2.5 1.5 33.5 40.0 23.5 2.0 5.0 9.0 5.0 4.0 1.5
0280 28.0 42.0 44.0 37.0 43.0 3.0 28.8 39.6 43.0 3.0 2.5 1.5 33.5 42.5 23.5 2.0 5.0 9.0 5.0 4.0 1.5
0300 30.0 44.0 46.0 39.0 45.0 3.0 30.8 41.5 45.0 3.0 2.5 1.5 34.5 42.5 24.5 2.0 5.0 9.0 5.0 4.0 1.5
0320 32.0 46.0 48.0 42.0 48.0 3.0 32.8 43.6 48.0 3.0 2.5 1.5 34.5 42.5 24.5 2.0 5.0 9.0 5.0 4.0 1.5
0330 33.0 47.0 49.0 42.0 48.0 3.0 33.8 44.6 48.0 3.0 2.5 1.5 34.5 42.5 24.5 2.0 5.0 9.0 5.0 4.0 1.5
0350 35.0 49.0 51.0 44.0 50.0 3.0 35.8 46.6 50.0 3.0 2.5 1.5 34.5 42.5 24.5 2.0 5.0 9.0 5.0 4.0 1.5
0380 38.0 53.0 58.0 49.0 56.0 4.0 38.8 52.1 56.0 3.0 2.5 1.0 38.0 45.0 27.0 2.0 6.0 9.0 5.0 4.0 1.5
0400 40.0 55.0 60.0 51.0 58.0 4.0 40.8 54.2 58.0 3.0 2.5 1.0 39.0 45.0 28.0 2.0 6.0 9.0 5.0 4.0 1.5
0430 43.0 58.0 63.0 54.0 61.0 4.0 43.8 57.2 61.0 3.0 2.5 1.0 39.0 45.0 28.0 2.0 6.0 9.0 5.0 4.0 1.5
0450 45.0 60.0 65.0 56.0 63.0 4.0 45.8 59.2 63.0 3.0 2.5 1.0 39.0 45.0 28.0 2.0 6.0 9.0 5.0 4.0 1.5
0480 48.0 63.0 68.0 59.0 66.0 4.0 48.8 62.2 66.0 3.0 2.5 1.0 39.0 45.0 28.0 2.0 6.0 9.0 5.0 4.0 1.5
0500 50.0 66.0 70.0 62.0 70.0 4.0 50.8 64.8 70.0 4.5 4.0 2.5 40.0 47.5 27.0 2.5 6.0 9.0 5.0 4.0 2.0
0530 53.0 69.0 73.0 65.0 73.0 4.0 53.8 67.7 73.0 4.5 4.0 2.5 40.0 47.5 27.0 2.5 6.0 9.0 5.0 4.0 2.0
0550 55.0 71.0 75.0 67.0 75.0 4.0 55.8 69.8 75.0 4.5 4.0 2.5 40.0 47.5 27.0 2.5 6.0 9.0 5.0 4.0 2.0
0580 58.0 77.0 83.0 70.0 78.0 4.0 58.8 72.8 78.0 4.5 4.0 2.5 42.0 52.5 29.0 2.5 6.0 9.0 5.0 4.5 2.0
0600 60.0 79.0 85.0 72.0 80.0 4.0 60.8 75.3 80.0 4.5 4.0 2.5 42.0 52.5 29.0 2.5 6.0 9.0 5.0 4.5 2.0
0630 63.0 82.0 88.0 75.0 83.0 4.0 63.8 78.3 83.0 4.5 4.0 2.5 45.0 52.5 32.0 2.5 6.0 9.0 5.0 4.5 2.0
0650 65.0 84.0 90.0 77.0 85.0 4.0 65.8 80.3 85.0 4.5 4.0 2.5 45.0 52.5 32.0 2.5 6.0 9.0 5.0 4.5 2.0
0680 68.0 87.0 93.0 81.0 90.0 4.0 68.8 83.3 90.0 4.0 3.5 2.0 47.0 52.5 33.5 2.5 7.0 9.0 5.0 4.5 2.0
0700 70.0 89.0 95.0 83.0 92.0 4.0 70.8 85.9 92.0 5.5 5.0 3.5 47.0 60.0 32.0 2.5 7.0 9.0 5.0 4.5 2.0
0750 75.0 94.0 104.0 88.0 97.0 4.0 75.8 90.9 97.0 5.5 5.0 3.5 47.0 60.0 32.0 2.5 7.0 9.0 5.0 4.5 2.0
0800 80.0 100.0 109.0 95.0 105.0 4.0 80.8 98.0 105.0 5.5 5.0 3.5 48.0 60.0 32.5 3.0 7.0 9.0 5.0 4.5 2.5
0850 85.0 105.0 114.0 100.0 110.0 4.0 85.8 103.0 110.0 5.5 5.0 3.5 48.0 60.0 32.5 3.0 7.0 9.0 5.0 4.5 2.5
0900 90.0 112.0 119.0 105.0 115.0 4.0 90.8 110.0 115.0 5.5 5.0 3.0 54.0 65.0 38.5 3.0 7.0 9.0 5.0 6.0 2.5
0950 95.0 117.0 124.0 110.0 120.0 4.0 95.8 115.0 120.0 5.5 5.0 3.0 54.0 65.0 38.5 3.0 7.0 9.0 5.0 6.0 2.5
1000 100.0 122.0 129.0 115.0 125.0 4.0 100.8 120.0 125.0 5.5 5.0 3.0 54.0 65.0 38.5 3.0 7.0 9.0 5.0 6.0 2.5
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

Type R33 Dimensional Data (mm)

SEAL
D D3 D4 D6 D7 D8 D9 D72 DD72 E F G L1 L1K L3 L5 L6 L7 L8 L9 R
SIZE
1050 105.0 127.0 134.0 122.0 131.0 5.0 105.8 125.0 131.0 7.0 6.5 1.7 64.0 — 42.0 3.0 9.0 10.0 6.0 6.0 2.5
1100 110.0 137.0 150.0 127.0 136.0 5.0 110.8 130.0 136.0 7.0 6.5 1.7 68.0 — 46.0 3.0 9.0 10.0 6.0 7.5 2.5
1150 115.0 142.0 155.0 132.0 141.0 5.0 115.8 135.0 141.0 7.0 6.5 1.7 68.0 — 46.0 3.0 9.0 10.0 6.0 7.5 2.5
1200 120.0 152.0 160.0 137.0 146.0 5.0 120.8 140.0 146.0 7.0 6.5 1.7 72.0 — 50.0 3.0 9.0 10.0 6.0 7.5 2.5
1250 125.0 157.0 165.0 142.0 151.0 5.0 125.8 145.0 151.0 7.0 6.5 1.7 72.0 — 50.0 3.0 9.0 10.0 6.0 7.5 2.5
1300 130.0 162.0 170.0 147.0 156.0 5.0 130.8 150.0 156.0 7.0 6.5 1.7 72.0 — 50.0 3.0 9.0 10.0 6.0 7.5 2.5
1350 135.0 167.0 175.0 157.0 166.0 8.0 135.8 160.0 166.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1400 140.0 172.0 180.0 162.0 171.0 8.0 140.8 165.0 171.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1450 145.0 177.0 185.0 167.0 176.0 8.0 145.8 170.0 176.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1500 150.0 182.0 190.0 172.0 181.0 8.0 150.8 175.0 181.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1550 155.0 187.0 200.0 177.0 186.0 8.0 155.8 180.0 186.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1600 160.0 192.0 205.0 182.0 191.0 8.0 160.8 185.0 191.0 8.5 8.0 3.2 82.0 — 57.0 3.0 9.0 13.0 7.0 7.5 2.5
1650 165.0 202.0 215.0 192.0 201.0 8.0 165.8 195.0 201.0 11.5 11.0 4.0 93.0 — 65.0 3.0 10.0 14.0 7.0 9.0 2.5
1700 170.0 207.0 220.0 197.0 206.0 8.0 170.8 200.0 206.0 11.5 11.0 4.0 93.0 — 65.0 3.0 10.0 14.0 7.0 9.0 2.5
1750 175.0 212.0 225.0 202.0 211.0 8.0 175.8 205.0 211.0 11.5 11.0 4.0 93.0 — 65.0 3.0 10.0 14.0 7.0 9.0 2.5
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

R34 Typical Arrangement

Type R34 Dimensional Data (mm) - Sizes 0100 to 1000 comply with the standards EN 12756, DIN 24960 AND ISO 3069
SEAL D D2 D3 D4 D6 D7 D8 D9 D72 DD72 E F G L1 L1K L2 L3 L5 L6 L7 L8 L9 R
SIZE
0100 10.0 14.0 24.0 26.0 17.0 21.0 3.0 10.5 19.3 21.0 3.0 2.5 1.5 37.0 40.0 18.0 28.5 1.5 4.0 8.5 5.0 3.75 1.0
0120 12.0 16.0 26.0 28.0 19.0 23.0 3.0 12.5 21.3 23.0 3.0 2.5 1.5 37.0 40.0 18.0 28.5 1.5 4.0 8.5 5.0 3.75 1.0
0140 14.0 18.0 29.0 34.0 21.0 25.0 3.0 14.5 23.3 25.0 3.0 2.5 1.5 37.0 42.5 18.0 28.5 1.5 4.0 8.5 5.0 3.75 1.0
0160 16.0 20.0 31.0 36.0 23.0 27.0 3.0 16.5 25.3 27.0 3.0 2.5 1.5 37.0 42.5 18.0 28.5 1.5 4.0 8.5 5.0 3.75 1.0
0180 18.0 22.0 33.0 38.0 27.0 33.0 3.0 18.5 29.6 33.0 3.0 2.5 1.5 38.5 45.0 20.0 28.5 2.0 5.0 9.0 5.0 3.75 1.5
0200 20.0 24.0 36.0 40.0 29.0 35.0 3.0 20.5 31.6 35.0 3.0 2.5 1.5 41.5 45.0 20.0 31.5 2.0 5.0 9.0 5.0 4.0 1.5
0220 22.0 26.0 40.0 42.0 31.0 37.0 3.0 22.5 33.6 37.0 3.0 2.5 1.5 42.5 45.0 20.0 32.5 2.0 5.0 9.0 5.0 4.0 1.5
0240 24.0 28.0 42.0 44.0 33.0 39.0 3.0 24.5 35.6 39.0 3.0 2.5 1.5 42.5 47.5 20.0 32.5 2.0 5.0 9.0 5.0 4.0 1.5
0250 25.0 30.0 44.0 46.0 34.0 40.0 3.0 25.8 36.6 40.0 3.0 2.5 1.5 43.5 47.5 20.0 33.5 2.0 5.0 9.0 5.0 4.0 1.5
0280 28.0 33.0 47.0 49.0 37.0 43.0 3.0 28.8 39.6 43.0 3.0 2.5 1.5 43.5 50.0 20.0 33.5 2.0 5.0 9.0 5.0 4.0 1.5
0300 30.0 35.0 49.0 51.0 39.0 45.0 3.0 30.8 41.5 45.0 3.0 2.5 1.5 43.5 50.0 20.0 33.5 2.0 5.0 9.0 5.0 4.0 1.5
0330 33.0 38.0 53.0 58.0 42.0 48.0 3.0 33.8 44.6 48.0 3.0 2.5 1.5 44.5 50.0 20.0 34.5 2.0 5.0 9.0 5.0 4.0 1.5
0350 35.0 40.0 55.0 60.0 44.0 50.0 3.0 35.8 46.6 50.0 3.0 2.5 1.5 45.5 50.0 20.0 35.5 2.0 5.0 9.0 5.0 4.0 1.5
0380 38.0 43.0 58.0 63.0 49.0 56.0 4.0 38.8 52.1 56.0 3.0 2.5 1.0 49.0 52.5 23.0 38.0 2.0 6.0 9.0 5.0 4.0 1.5
0400 40.0 45.0 60.0 65.0 51.0 58.0 4.0 40.8 54.2 58.0 3.0 2.5 1.0 49.0 52.5 23.0 38.0 2.0 6.0 9.0 5.0 4.0 1.5
0430 43.0 48.0 63.0 68.0 54.0 61.0 4.0 43.8 57.2 61.0 3.0 2.5 1.0 49.0 52.5 23.0 38.0 2.0 6.0 9.0 5.0 4.0 1.5
0450 45.0 50.0 66.0 70.0 56.0 63.0 4.0 45.8 59.2 63.0 3.0 2.5 1.0 49.0 52.5 23.0 38.0 2.0 6.0 9.0 5.0 4.0 1.5
0480 48.0 53.0 69.0 73.0 59.0 66.0 4.0 48.8 62.2 66.0 3.0 2.5 1.0 49.0 52.5 23.0 38.0 2.0 6.0 9.0 5.0 4.0 1.5
0500 50.0 55.0 71.0 75.0 62.0 70.0 4.0 50.8 64.8 70.0 4.5 4.0 2.5 51.0 57.5 25.0 38.0 2.5 6.0 9.0 5.0 4.0 2.0
0530 53.0 58.0 77.0 83.0 65.0 73.0 4.0 53.8 67.7 73.0 4.5 4.0 2.5 52.0 57.5 25.0 39.0 2.5 6.0 9.0 5.0 4.5 2.0
0550 55.0 60.0 79.0 85.0 67.0 75.0 4.0 55.8 69.8 75.0 4.5 4.0 2.5 52.0 57.5 25.0 39.0 2.5 6.0 9.0 5.0 4.5 2.0
0580 58.0 63.0 82.0 88.0 70.0 78.0 4.0 58.8 72.8 78.0 4.5 4.0 2.5 55.0 62.5 25.0 42.0 2.5 6.0 9.0 5.0 4.5 2.0
0600 60.0 65.0 84.0 90.0 72.0 80.0 4.0 60.8 75.3 80.0 4.5 4.0 2.5 55.0 62.5 25.0 42.0 2.5 6.0 9.0 5.0 4.5 2.0
0630 63.0 68.0 87.0 93.0 75.0 83.0 4.0 63.8 78.3 83.0 4.5 4.0 2.5 55.0 62.5 25.0 42.0 2.5 6.0 9.0 5.0 4.5 2.0
0650 65.0 70.0 89.0 95.0 77.0 85.0 4.0 65.8 80.3 85.0 4.5 4.0 2.5 55.0 62.5 25.0 42.0 2.5 6.0 9.0 5.0 4.5 2.0
0700 70.0 75.0 94.0 104.0 83.0 92.0 4.0 70.8 85.9 92.0 5.5 5.0 3.5 58.0 70.0 28.0 43.0 2.5 7.0 9.0 5.0 4.5 2.0
0750 75.0 80.0 100.0 109.0 88.0 97.0 4.0 75.8 90.9 97.0 5.5 5.0 3.5 59.0 70.0 28.0 44.0 2.5 7.0 9.0 5.0 4.5 2.0
0800 80.0 85.0 105.0 114.0 95.0 105.0 4.0 80.8 98.0 105.0 5.5 5.0 3.5 59.0 70.0 28.0 43.5 3.0 7.0 9.0 5.0 4.5 2.5
0850 85.0 90.0 112.0 119.0 100.0 110.0 4.0 85.8 103.0 110.0 5.5 5.0 3.5 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
0900 90.0 95.0 117.0 124.0 105.0 115.0 4.0 90.8 110.0 115.0 5.5 5.0 3.0 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
0950 95.0 100.0 122.0 129.0 110.0 120.0 4.0 95.8 115.0 120.0 5.5 5.0 3.0 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
1000 100.0 105.0 127.0 135.0 115.0 125.0 4.0 100.8 120.0 125.0 5.5 5.0 3.0 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
0950 95.0 100.0 122.0 129.0 110.0 120.0 4.0 95.8 115.0 120.0 5.5 5.0 3.0 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
1000 100.0 105.0 127.0 135.0 115.0 125.0 4.0 100.8 120.0 125.0 5.5 5.0 3.0 66.0 75.0 28.0 50.5 3.0 7.0 9.0 5.0 6.0 2.5
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

Type R34 Dimensional Data (mm)

SEAL D D2 D3 D4 D6 D7 D8 D9 D72 DD72 E F G L1 L1K L2 L3 L5 L6 L7 L8 L9 R
SIZE
1050 105.0 110.0 137.0 150.0 122.0 131.0 5.0 105.8 125.0 131.0 7.0 6.5 1.7 83.0 — 42.0 61.0 3.0 9.0 10.0 6.0 7.5 2.5
1100 110.0 115.0 142.0 155.0 127.0 136.0 5.0 110.8 130.0 136.0 7.0 6.5 1.7 83.0 — 42.0 61.0 3.0 9.0 10.0 6.0 7.5 2.5
1150 115.0 120.0 152.0 160.0 132.0 141.0 5.0 115.8 135.0 141.0 7.0 6.5 1.7 87.0 — 42.0 65.0 3.0 9.0 10.0 6.0 7.5 2.5
1200 120.0 125.0 157.0 165.0 137.0 146.0 5.0 120.8 140.0 146.0 7.0 6.5 1.7 87.0 — 42.0 65.0 3.0 9.0 10.0 6.0 7.5 2.5
1250 125.0 130.0 162.0 170.0 142.0 151.0 5.0 125.8 145.0 151.0 7.0 6.5 1.7 87.0 — 42.0 65.0 3.0 9.0 10.0 6.0 7.5 2.5
1300 130.0 135.0 167.0 175.0 147.0 156.0 5.0 130.8 150.0 156.0 7.0 6.5 1.7 92.0 — 42.0 70.0 3.0 9.0 10.0 6.0 7.5 2.5
1350 135.0 140.0 172.0 180.0 157.0 166.0 8.0 135.8 160.0 166.0 8.5 8.0 3.2 97.0 — 47.0 72.0 3.0 9.0 13.0 7.0 7.5 2.5
1400 140.0 145.0 177.0 185.0 162.0 171.0 8.0 140.8 165.0 171.0 8.5 8.0 3.2 97.0 — 47.0 72.0 3.0 9.0 13.0 7.0 7.5 2.5
1450 145.0 150.0 182.0 190.0 167.0 176.0 8.0 145.8 170.0 176.0 8.5 8.0 3.2 97.0 — 47.0 72.0 3.0 9.0 13.0 7.0 7.5 2.5
1500 150.0 155.0 187.0 200.0 172.0 181.0 8.0 150.8 175.0 181.0 8.5 8.0 3.2 97.0 — 47.0 72.0 3.0 9.0 13.0 7.0 7.5 2.5
1550 155.0 160.0 192.0 205.0 177.0 186.0 8.0 155.8 180.0 186.0 8.5 8.0 3.2 97.0 — 47.0 72.0 3.0 9.0 13.0 7.0 7.5 2.5
1600 160.0 165.0 202.0 215.0 182.0 191.0 8.0 160.8 185.0 191.0 8.5 8.0 3.2 103.0 — 47.0 78.0 3.0 9.0 13.0 7.0 9.0 2.5
1650 165.0 170.0 207.0 220.0 192.0 201.0 8.0 165.8 195.0 201.0 11.5 11.0 4.0 108.0 — 52.0 80.0 3.0 10.0 14.0 7.0 9.0 2.5
1700 170.0 175.0 212.0 225.0 197.0 206.0 8.0 170.8 200.0 206.0 11.5 11.0 4.0 108.0 — 52.0 80.0 3.0 10.0 14.0 7.0 9.0 2.5

Pressure Rating Limits

Pressure Pressure Pressure Pressure
bar(g) psi(g) bar(g) psi(g)
70 1000 35 450
Lubricang fluid @ 1450 RPM Lubricang fluid @ 250 RPM
900
60 Carbon vs. Silicon Carbide 400
30 Carbon vs. Silicon Carbide
800
350
50 700 25
300
600 R34
40 20 250
R34 500
30 15 200
400
300
R33 150
20 10
R33 200 100
10 5
100 50

0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 100 110 120 130 140 150 160 170
Seal Size (mm) Seal Size (mm)

To determine the maximum pressure for the size of Type R33 or R34 seal required: multiply the pressure obtained from the Pressure Rating Limits chart
above by the appropriate Multiplier Factors in chart on next page.
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

Multiplier Factors

Selection Multiplier Example of determining PV limits:

Considerations Factor Seal: 33 mm diameter Type R33
Petrol/Gasoline, Product: Petrol/Gasoline
x 1.00
Sealed fluid kerosene or better
lubricity Face materials: Carbon vs. silicon carbide
Water and aqueous solutions x 0.75
Lighter hydrocarbons (s.g. < 0.65), etc. Operating temperature: 35°C/95°F
Carbon vs. silicon carbide x 1.00 Operating speed: 2,950 rpm
Face and seat
materials
Using the Pressure Rating Limits graphs on previous page, the maximum
Silicon carbide vs. pressure would be 20 barg/290 psig.
x 0.60
silicon carbide
From the Multiplier Factors table on the left, apply the multipliers for the
Up to 80°C/175°F x 1.00 specific service requirements.
Above 80 to 120°C/ 20 barg/290 psig x 1.00 x 1.00 x 1.00 x 0.85 = 17 barg/246 psig
x 0.90
Sealed fluid 175 to 250°F Therefore, for the example given, the maximum operating pressure is
temperature Above 120 to 180°C/ 17 barg/246 psig.
x 0.80
250 to 355°F
The operating parameters shown can be exceeded for certain applications.
Above 180°C/355°F x 0.65 If the required operating pressure is greater than the calculated PV limit,
please consult your John Crane Sales/Service Engineer.
Seal sizes ≤ 100 mm/4.0 in x 1.00
Up to 1,800 rpm
Seal sizes ≤ 100 mm/4.0 in x 0.85
Above 1,800 to 3,600 rpm

Speed Seal sizes > 100 mm/4.0 in x 1.00

Up to 500 rpm
Seal sizes > 100 mm/4.0 in x 0.65
Above 500 to 1,800 rpm
Seal sizes > 100 mm/4.0 in x 0.50
Above 1,800 to 3,000 rpm

Temperature Limit for O-rings Speed Limits

Speed (RPM)
Compound Temperature 6000

Ethylene propylene -40°C to 150°C/-40°F to 300°F

5000
Medium nitrile -40°C to 120°C/-40°F to 250°F
4000
Fluorocarbon -30°C to 205°C/-22°F to 400°F
3000
Perfluoroelastomer -20°C to 260°C/-4°F to 500°F
Pure PTFE -60°C to 250°C/-80°F to 485°F 2000

1000

0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Seal Size (mm)
 TYPE R33 AND R34
O-RING SEAL
Technical Specification

Materials of Construction
SEAL COMPONENTS MATERIALS
Description Standard DIN Code Options DIN Code
Resin impregnated carbon B Antimony carbon A2
Face/Primary ring
Reaction bonded silicon carbide Q2 — —
Seat/Mating ring Alpha sintered silicon carbide Q1 Tungsten carbide U
Face carrier 316 stainless steel G Consult John Crane Engineering —
Spring
Set srew
Driving carrier 904L stainless steel G3 Consult John Crane Engineering —
Clip ring 904L stainless steel G3 PTFE T2
Fluoroelastomer V
Perfluoroelastomer K
O-ring Several —
Ethylene propylene E
Medium nitrite P

Checking the Machine

A – Seal size
B – 0.3-0.6 μm Ra
12-24 μinch Ra
C – 1.6-3.2 μm Ra
63-125 μinch Ra
D – 1.5 mm/0.060 inch
E – 3.0 mm/0.120 inch

1 2 3 4
Squareness of shaft Concentricity seal Shaft runout Shaft end play
to seal chamber face chamber bore to shaft
< 0.08 mm FIM, speed <= 1800 RPM < 0.08 mm FIM, speed <= 1800 RPM
< 0.05 mm FIM, speed >1800 RPM <0.006 inch FIM < 0.05 mm FIM, speed >1800 RPM <0.003 inch FIM
< 0.003 inch FIM, speed <= 1800 RPM <0.15 mm FIM < 0.003 inch FIM, speed <= 1800 RPM <0.08 mm FIM
< 0.002 inch FIM, speed >1800 RPM < 0.002 inch FIM, speed >1800 RPM
TYPE R33 AND R34
O-RING SEAL
Technical Specification

North America Europe Latin America Middle East & Africa Asia Pacific
United States of America United Kingdom Brazil United Arab Emirates Singapore
Tel: 1-847-967-2400 Tel: 44-1753-224000 Tel: 55-11-3371-2500 Tel: 971-481-27800 Tel: 65-6518-1800
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to
their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without
prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and
ISO14001 Certified, details available on request.
©2021 John Crane 12/21 johncrane.com TDS-TYPE33 and 34