Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Router 6676

Meeting the strictest radio requirements


The Router 6676 is a high-capacity cell site router, designed to
enable high quality network performance in advanced 4G/5G 360Gbps switching capacity in a 1RU compact and hardened
radio networks in a very energy efficient way. form factor enabling lower rental costs and lower OPEX.
Native 25GE ports for baseband connection and 100GE ports
Router 6676 provides high density 1/10/25GE and 100GE for uplink. The Router 6676 has low latency native SRv6
ports with 360Gbps switching capacity in a compact, less than support without performance degradation.
300mm deep, and environmentally hardened 1RU form factor.
The Router 6676 switch processor natively supports SRv6 Precise and proven synchronization
without performance impacts.
5G enhancements, such as advanced coordination and carrier
aggregation that enable higher capacities, have strict
Router 6676 supports VPN services over IP/MPLS/SRv6
synchronization requirements. The Router 6676 can act as a
networks, service provider SDN service exposure using
PTP grandmaster or boundary clock to provide resilient and
NETCONF/YANG, hierarchical quality of service and advance
robust frequency and time/phase synchronization to the
synchronization features.
basebands and vDUs. It meets the stringent Class C timing
The high capacity, low latency and precise synchronization are
requirements. The Ericsson synchronization solution comes
optimized to maximize the 5G performance enhancements
pre-verified to work with RAN.
such as ESS, COMP and Carrier Aggregation that enable
efficient use of spectrum.
The Router 6676 has strong node security features such as
SDN capabilities and programmability
vendor credential and vendor software authentication ensuring Provides application aware traffic engineering with open and
data security even in insecure environments. standardized interfaces, enabling network slicing and ability to
tailor services for utmost agility.

The Router 6676 is part of the Ericsson Router 6000 Series, a Designed for low CAPEX and OPEX
RAN integrated and service provider SDN enabled IP transport
family of products. Router 6676 uses highly integrated merchant silicon and
The Router 6000 series offers a range of high-performance advanced fan speed algorithms in an efficient way to minimize
routers with resiliency features and form factors optimized for the power consumption and save OPEX. Filter less design
the various needs of metro, backhaul and fronthaul networks. removes frequent costly frequent air filter inspections, resulting
in $1000 yearly OPEX savings/site.

Strong Security
Router 6676 provides secure boot, vendor credential that
enables ubiquitous deployments in trusted and untrusted
environments.

Radio integrated Transport


Provides tight hardware and mechanical integration as part of
Ericsson Radio System and allows for significantly easier
deployment and lower overall TCO.
Router 6676 uses the same Ericsson Network Manager (ENM)
as RAN and Core. The end-to-end network solution is pre-
verified, which saves integration costs and allows faster time to
market.
Technical specification for Router 6676
Connectivity
Interfaces: 4x100GE QSFP28, 20x1GE/10GE/25GE SFP28, 1x1GE RJ45
1x 100 / 1000 Base-T Ethernet for Out-of-Band Management
1x RJ45 console port
1x RJ45 Alarm ports for 3 input and 1 output alarms contacts
1x USB , type C, port for file uploads and downloads
Synchronization interfaces: 1x RJ45 ports 1PPS+TOD input/output

Mechanical
System weight: Fully configured chassis: 7.0kg / 15.4lbs
Dimension (H x W x D): 44mm x 444mm x 280mm
Air flow: Filter-less design, Front to Back with field swappable fan tray

Electrical
Power supply DC: -48 VDC, Dual Feed

Environmental
Operating Temperature: -40°C to +65°C
Relative Humidity: 5 - 95% Non-condensing

Key features
IP/MPLS: IPv4, IPv6, BGP-4, MP-BGP, BGP FRR, BGP-LS, IS-IS, OSPFv2/v3, VRRPv2/v3, LFA/RLFA/TI-LFA,
RSVP-TE including FRR, LDP, T-LDP, mLDP, Segment Routing MPLS, Segment Routing IPv6(SRv6),
PCEP, Seamless MPLS, CSPF, Routing policy, Policy based routing, DHCP client/relay/Server
Ethernet: 802.1Q virtual LAN (VLAN), 802.1ad Provider Bridge, IEEE 802.3ad Link Aggregation Control Protocol,
BVI – Bridged Virtual Interface, QinQ, G.8032 Ethernet Ring Protection Switching, BUM storm protection,
Jumbo Frame up to 9600 bytes
Layer-2/Layer-3 Virtual Private Networking: L3 MPLS VPNs, 6VPE/6PE, Inter-autonomous-system MPLS VPN (options A, B, C), VPWS for E-Line
Services, VPLS/H-VPLS for E-LAN Services, Pseudowire redundancy, MEF CE1.0/2.0 Compliant, Ethernet
VPN for E-Line & E-LAN Services, mEthernet VPN IRB
Multicast Protocols: IPv4/IPv6 multicast, PIM-SM/SSM, IGMP v1/v2/v3, MLDv2, MVPN, IGMP snooping
Timing and Synchronization: IEEE 1588-2008 Precision Time Protocol, ITU-T Profiles for Frequency (G.8265.1 SOOC) and Time/Phase
(G.8275.1 T-BC/GM & G.8275.2 T-BC/GM), Class C performance, NTP, SyncE with ESMC, Enhanced
SyncE, Stratum 3E clock, L1 Assist holdover, PTP quality measurement & monitoring
Operation and Maintenance: IEEE 802.1ag Connectivity Fault Management, ITU-T Y.1731 (DM, SLM and Throughput), 802.3ah
Ethernet OAM, Microwave Bandwidth Notification, Port Loopback, MACSWAP, MPLS Ping /Traceroute,
BFD IPv4 & IPv6 Single Hop, BFD IPv4 & IPv6 Multi Hop, Micro-BFD, TWAMP Reflector, TWAMP Initiator,
TWAMP Server, Port Mirroring, LLDP, IPFIX (IP Flow Information Export, Event Manager
Security: Secure boot, Vendor credential, secured storage, Control plane protection, Access Control lists, RADIUS,
TACACS+, LDAP, SSH v2, Reverse-path forwarding, CMPv2, CRL, TLS, 802.1x port-based network access
control, Routing authentication, IPSec*
Quality of Service: Strict-queuing, WFQ, priority-WFQ, 3-level Hierarchical QoS, Deep packet buffers, RED/Weighted RED,
Ingress policing, Egress shaping, 802.1p, MPLS EXP bits, DiffServ
Network Management: Ericsson Network Manager (ENM), CLI, SNMP v2c/v3, NETCONF, YANG models, Syslog, RMON, Fault
Management, Configuration Backup & Restore, Performance Management Job, Zero Touch Provisioning,
Telemetry Streaming

Standards and specifications


Safety: LVD Directive 2014/35/EU, IEC/EN 62368-1, CFR 29 Part 1910, UL/CSA 62368-1
EMC: EMC Directive 2014/30/EU, EN 300386, EN 301489-1, CISPR 32, EN 55032, CISPR 35, EN55035, EN
50121-1, EN 50121-4, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 300132-2, ES
201468, DTAG 1 TR 9; CFR 47 Part 15, ICES-003; VCCI V-3
ENV: RoHS Directive 2011/65/EU, WEEE Directive 2012/19/EU, EN 300 019-2-1, EN 300 019-2-2, EN 300
019-2-3, EN 300 753
NEBS: GR-1089-CORE, GR-63-CORE, SR-3580 (NEBS Level 3), GR-3108-CORE, ATT-TP-76200, VZ.TPR.9203,
VZ.TPR.9205, VZ.TPR.9305

*Future release

1/287 01-FGC 101 4196 Uen Rev A


The content of this document is subject to revision without notice.
© Ericsson AB 2023 Ericsson shall have no liability for any error or damage of any kind
www.ericsson.com resulting from the use of this document.

You might also like