Professional Documents
Culture Documents
TDS-103 Dispersion Techniques Carbopol Polymers
TDS-103 Dispersion Techniques Carbopol Polymers
TDS-103
Edition: January, 2002
Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000
The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained therefrom. The information is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the application disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability of any use of handling of any material beyond Lubrizol Advanced Materials, Inc.s direct control. THE SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner.
2 break-up of any loose polymer or agglomerates due to the static charge on the particles. A metallic screen decreases the tendency to build more static charge on the particles as they are sifted. Once all the dry polymer has been introduced, continue agitating at the moderate to rapid rate for 10-15 minutes. Reduce the speed to avoid the entrapment of excess air. For emulsions, add oils and emulsifiers to form the emulsion prior to neutralizing the Carbopol to build emulsion viscosity. Neutralization of Carbopol is accomplished with a suitable alkali or amine base. For the order of neutralizer addition in gel products, see the Carbopol Troubleshooting Guide. Selecting Neutralizers for High Alcohol Solutions Metallic alkali (NaOH, KOH, etc.) will neutralize Carbopol polymers with less than 20% ethanol. Triethanolamine (TEA) will neutralize Carbopol polymers up to 50% ethanol solution. 2-Hydroxypropyl ethylene diamine (Quadrol) will neutralize Carbopol polymers up to 70% ethanol solution.
1. Cowles BladeNot recommended due to high shear. 2. Paddle BladeFrequently used when blending operations follow initial dispersion of Carbopol polymer. 3. 3-Blade Marine ImpellerExcellent choice for dispersing Carbopol polymer. Impeller of choice when making emulsions. 4. Foddler ImpellerPoor mixing due to low shear. 5. Hi-Lift ImpellerHigh shear: use with caution.
Note: Dispersions of Carbopol polymers made to a precise solids level for analytical viscosity testing should follow Lubrizol Standard Testing Procedure 430-I, "Brookfield Viscosity (low shear)."
B. Large Quantity Batch Dispersions Dispersion volumes ranging from tens of gallons to hundreds of gallons at concentrations of Carbopol polymers of up to three weight percent may be prepared with an eductor or flocculant disperser. This technique is a fast, inexpensive means of dispersing Carbopol polymers with reduced dusting. Figure 1 shows how the rate of dispersion increases with an increase in water pressure. Figure 2 shows the basic design of the eductor. It is a small, inexpensive, metal or plastic, nonmoving plumbing valve which exerts a partial vacuum on the powder inlet via the Bernoulli effect. Carbopol polymer is pulled from the eductor funnel into the eductor valve throat. The partial vacuum is created by the flow of incoming make-up water through the venturi of the eductor throat. Water turbulence within the valve wets out the polymer to enable the formation of quality dispersions. The eductor outlet should have enough piping (4-5 ft.) to build sufficient back pressure to direct the polymer/ water slurry into an agitated mix tank filled with water to complete polymer hydration. Eductors can disperse 22.7 kg (50 lb>) of polymer in five to ten minutes with up to 3.0% polymer concentration. Determining the exact eductor and size required for the specific application can best be determined from the technical bulletins and advice of an eductor manufacturer. Note: Select an eductor which is capable of a solid particle dispersion. Do not use a liquid eductor model. The funnel may be replaced by a flexible hose with stainless steel end tube to enable direct vacuum pick-up from the box of Carbopol polymer.
3
Figure 1 Dispersion Rate of Carbopol Polymers with an Eductor
Feed Rate of Carbopol Resins lb/min
Further information regarding eductors can be obtained from these manufacturers: PENBERTHY P.O. Box 112 Prophetstown, IL 61277 Phone: (815) 537-2311 FAX: (815) 537-5764
26 22 18 14 10 6 2 2 6 10 14 18 22 26 30
Poor dispersing below 5 gal/min or 35 psig
AMETECK INCORPORATED Division of Schutte and Koerting 2233 State Road Bensalem, PA 19020 Phone: (215) 639-0900 FAX: (215) 639-1597 FOX VALVE DEVELOPMENT CORPORATION Hamilton Business Park, Unit 6A Franklin Road Dover, NJ 07801 Phone: (201) 328-1011 FAX: (201) 328-3651 DICKENS & WILLIAMSON INCORPORATED P.O. Box 25009 Charlotte, NC 28212 Phone: (704) 537-0304 FAX: (704) 245-1977 C. Large Quantity Continuous Production Dispersions The production of good quality, high-solids Carbopol polymer dispersions from a continuous production scheme is possible with a mechanical in-line powder disperser. Mechanical dispersers use the principle of a high velocity eductor coupled with the mechanical working configuration of an inline homogenizer to rapidly disperse and wet each individual polymer particle instantaneously. This highly turbulent, high-shear mixer operates at such a rapid rate that the particles are wetted and expelled prior to polymer swelling. Lump formation and polymer degradation from mechanical shearing are eliminated. The valved powder hopper feed of the mechanical disperser can significantly reduce the level of air entrapment or foaming. Dispersed particles are expelled from the disperser directly in a tank with low/moderate agitation. Table 1 provides comparative outline of mechanical dispersers and their features.
Figure 2 Eductor
Funnel
Make-up water in
Eductor outlet
4 Further information regarding mechanical dispersers can be obtained from the following manufacturers or distributors. YTRON Dr. Karg GmbH Osternacherstrasse 50 D-8210 Prien am Chiemsee Germany Phone: 08051/1457 QUADRO PROCESS INC. 72 King Street South St. Jacobs, ON Canada NOB 2N0 Phone: (519) 664-3724 SILVERSON MACHINES LTD. Waterside Chesham, Bucks HP5 1 PQ, England United Kingdom Phone: 0494786331 NORTH AMERICAN SILVERSON MACHINES LTD. P.O. Box 589 50 Industrial Drive East Longmeadow, MA 01028 Phone: (413) 525-4825 ARDE BARINCO INC. 500 Walnut Street Norwood, NJ 07648 Phone: (201) 784-9880 D. Carbopol Polymers and Foam Some foaming can occur in the preparation of Carbopol polymer in water dispersions, particularly with Carbopol 1342 and 1382. The significant yield value of these dispersions (even as unneutralized polymers) can result in the formation of a persistent foam.
Table 1 Mechanical Dispersers for Carbopol Polymers
Model Manufacturer/ Distributor Maximum Carbopol Water Carbopol Polymer Polymer Flow Rate Capacity (lbs./hr.) Solids (lbs./hr.) (wt. %)
Avoid using hot water. The water vapor will prematurely swell the polymer end clog the eductor. A minimum 3/4-inch (2 cm) diameter pipe end 35 psig (1.2 atm) water pressure is required for an eductor. Constant pressure must be maintained. If necessary, include a pump for inlet water. The eductor should be installed with easily removable plumbing fittings to facilitate cleaning. The discharge must be located above the liquid level of the tank to prevent back pressure. Prevent plugging of the eductor throat by starting with a clean eductor and initiating the water flow before adding the preweighed polymer to the eductor funnel. If the eductor does plug with dry polymer, care should be taken when cleaning so that the eductor orifice size is not altered. Tapping the funnel manually or with an inexpensive vibrator will prevent Carbopol polymer from sticking to the funnel.
A handy technique to break the foam is to partially collapse the polymer by the addition of a very low level of strong mineral acid. The yield value is reduced and the trapped air surfaces. Phosphoric or hydrochloric acid is effective at O.5% on the weight of Carbopol polymer. A 1.0 weight percent dispersion of Carbopol polymer would require 0.005 weight percent or 50 ppm H3PO4 or HC1. This level of acid results in no significant contribution of salt when neutralizing Carbopol polymer. Therefore, the viscosity of the end product is unaffected. Organic acids such as citric or lactic acid are not recommended because they are weaker acids and would yield higher concentrations of residual salts upon neutralization.
ZC Silverson Flashblend
15* 15-20* 4
C. Dispersing Carbopol Polymer in Polar Organic Systems Since polar organic solvents prevent the rapid swelling of Carbopol polymers, sifting the polymers may be optional. In pure solvent or at high concentrations in water, the Carbopol polymer can be directly added with minimal agitation. When using pure solvent, add the polymer/solvent slurry to water, or vice versa, with vigorous (800-1200 rpm) mixing. Polar organic solvents include alcohols and glycols. D. Dry Blending of Carbopol Polymers To reduce addition and mixing time, Carbopol polymers can be initially dry blended with other dry ingredients. The blend is usually free-flowing and free of lumps if the polymer constitutes less than half of the total dry weight. Avoid blending Carbopol polymer with polyvinylpyrrolidone (PVP), cellulosic polymers or other gums and clays. These blends may give water insoluble complexes or may prevent proper swelling of Carbopol polymer.
Note: Test the compatibility of Carbopol polymer in the oil in which it is to be dispersed. In the presence of some polar oils (aromatic or dicarboxylic acid esters) or molten oils above 60C, Carbopol polymer will physically plasticize, hindering stable emulsion formation. Dispersing Carbopol polymer directly into the water in these cases will result in smooth, stable emulsions.
A. Oil-in-Water Emulsions Combine the ingredients of the oil phase and, if required, heat until all materials are liquid. Temperature must not exceed 60C. Add Carbopol polymer to the oil phase with moderate to vigorous agitation of 600-800 rpm. Immediately follow with the addition of water containing the appropriate inorganic or amine base to neutralize and thicken the Carbopol polymer and set the emulsion. Increase the rate of agitation to 10001200 rpm and mix for 15-20 minutes or until a smooth, non-grainy texture is apparent. B. Aqueous Suspension from Insoluble Concentrates of Carbopol Polymers Non-solvent dispersions with Carbopol polymer in mineral oil, mineral spirits, kerosene and low HLB non-ionic surfactants can be prepared using moderate agitation to wet out the polymer prior to its addition into water. This bulk dispersion of the polymer by a non-solvent delays the rate at which the Carbopol polymer swells or hydrates into water, thus minimizing clumping or the formation of inferior quality aqueous dispersions. These non-solvent dispersions of Carbopol polymers should be used immediately to avoid solid polymer settling or agglomeration of the polymer due to plasticization.