Professional Documents
Culture Documents
ISO 14520 12 2005 Gaseous Fire Extinguishing Systems Physical Properties
ISO 14520 12 2005 Gaseous Fire Extinguishing Systems Physical Properties
14520-12:2005
Gaseous
fire-extinguishing
systems— Physical
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
ICS 13.220.10
12&23<,1*:,7+287%6,3(50,66,21(;&(37$63(50,77('%<&23<5,*+7/$:
BS ISO 14520-12:2005
National foreword
Summary of pages
This document comprises a front cover, an inside front cover, the ISO title page,
pages ii and iii, a blank page, pages 1 to 7 and a back cover.
The BSI copyright notice displayed in this document indicates when the
document was last issued.
© BSI 2006
INTERNATIONAL ISO
STANDARD 14520-12
Second edition
2005-12-15
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
Reference number
ISO 14520-12:2005(E)
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
ii
BS ISO 14520-12:2005
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14520-12 was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire
fighting, Subcommittee SC 8, Gaseous media and firefighting systems using gas.
This second edition cancels and replaces the first edition (ISO 14520-12:2000), which has been technically
revised.
ISO 14520 consists of the following parts, under the general title Gaseous fire-extinguishing systems —
Physical properties and system design:
Parts 3, 4 and 7, which dealt with FC-2-1-8, FC-3-1-10 and HCFC 124 extinguishants, respectively, have been
withdrawn, as these types are no longer manufactured.
iii
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
blank
BS ISO 14520-12:2005
1 Scope
This part of ISO 14520 gives specific requirements for gaseous fire-extinguishing systems, with respect to the
IG-01 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is
applicable to systems operating at nominal pressures of 160 bar, 200 bar and 300 bar at 15 °C. This does not
preclude the use of other systems; however, design data for other pressures were not available at time of
publication.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 14520-1:— 1 ), Gaseous fire-extinguishing systems — Physical properties and system design —
Part 1: General requirements
4.1 General
IG-01 is a colourless, almost odourless, electrically non-conductive gas at ambient (20 °C) temperature, with a
density approximately 1,4 times that of air.
IG-01 extinguishes fires mainly by a reduction of the oxygen concentration in the atmosphere of the hazard
enclosure.
1
BS ISO 14520-12:2005
Property Requirement
IG-01 total flooding systems may be used for extinguishing fires of all classes within the limits specified in
ISO 14520-1:— 2), Clause 4.
The extinguishant requirements per volume of protected space are shown in Table 3 for various levels of
concentration. These are based on methods given in ISO 14520-1— 2), 7.6.
The extinguishing concentrations and design concentrations for heptane and Surface Class A hazards are
given in Table 4, while inerting concentrations are given in Table 5.
2
BS ISO 14520-12:2005
–20 0,5201 0,481 0,554 0,631 0,714 0,803 0,899 1,005 1,120
–15 0,5304 0,472 0,543 0,619 0,700 0,787 0,882 0,985 1,099
–10 0,5406 0,463 0,533 0,607 0,686 0,772 0,865 0,966 1,078
–5 0,5509 0,454 0,523 0,596 0,674 0,758 0,849 0,948 1,058
0 0,5612 0,446 0,513 0,585 0,661 0,744 0,833 0,931 1,038
5 0,5715 0,438 0,504 0,574 0,649 0,731 0,818 0,914 1,020
10 0,5817 0,430 0,495 0,564 0,638 0,718 0,804 0,898 1,002
15 0,5920 0,423 0,486 0,554 0,627 0,705 0,790 0,883 0,984
20 0,6023 0,416 0,478 0,545 0,616 0,693 0,777 0,868 0,968
25 0,6126 0,409 0,470 0,536 0,606 0,682 0,764 0,853 0,951
30 0,6228 0,402 0,462 0,527 0,596 0,670 0,751 0,839 0,936
35 0,6331 0,395 0,455 0,518 0,586 0,659 0,739 0,825 0,920
40 0,6434 0,389 0,448 0,510 0,577 0,649 0,727 0,812 0,906
45 0,6536 0,383 0,440 0,502 0,568 0,639 0,716 0,799 0,892
50 0,6639 0,377 0,434 0,494 0,559 0,629 0,704 0,787 0,878
55 0,6742 0,371 0,427 0,487 0,550 0,619 0,694 0,775 0,864
60 0,6845 0,366 0,421 0,479 0,542 0,610 0,683 0,763 0,851
65 0,6947 0,360 0,414 0,472 0,534 0,601 0,673 0,752 0,839
70 0,7050 0,355 0,408 0,465 0,526 0,592 0,663 0,741 0,827
75 0,7153 0,350 0,403 0,459 0,519 0,584 0,654 0,730 0,815
80 0,7256 0,345 0,397 0,452 0,511 0,575 0,645 0,720 0,803
85 0,7358 0,340 0,391 0,446 0,504 0,567 0,636 0,710 0,792
90 0,7461 0,335 0,386 0,440 0,497 0,560 0,627 0,700 0,781
95 0,7564 0,331 0,381 0,434 0,491 0,552 0,618 0,691 0,770
100 0,7666 0,326 0,376 0,428 0,484 0,545 0,610 0,682 0,760
V/V is the agent volume requirement (in cubic metres per cubic metre); i.e. the quantity Q (in cubic metres) of agent
required at a reference temperature of 20 °C and a pressure of 1,013 bar per cubic metre of protected volume to
produce the indicated concentration at the temperature specified:
QR = m ⋅ S R
where
SR is the specific reference volume (in cubic metres per kilogram); i.e. the specific vapour volume at the filling
reference temperature for superheated IG-01 vapour at a pressure of 1,013 bar which may be approximated
by the formula:
S R = k1 + k 2 ⋅ TR
where k1 = 0,561 19; k2 = 0,002 054 5; TR is the reference temperature (in degrees Celsius); i.e. filling
temperature (20 °C in the table);
V ⎛ 100 ⎞
m= ⋅ In ⎜ ⎟
S ⎝ 100 - c ⎠
V is the net volume of hazard (in cubic metres); i.e. the enclosed volume minus the fixed structures impervious to
extinguishant;
T is the temperature (in degrees Celsius); i.e. the design temperature in the hazard area;
S is the specific volume (in cubic metres per kilogram); the specific volume of superheated IG-01 vapour at a pressure
of 1,013 bar may be approximated by
S = k1 + k 2 ⋅ T
c is the concentration (in percent); i.e. the volumetric concentration of IG-01 in air at the temperature indicated, and a
pressure of 1,013 bar absolute.
3
BS ISO 14520-12:2005
Class B
Heptane (cup burner) 39,2 51,0
Heptane (room test) 33,7
Surface Class A
Wood crib 30,7
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
The extinguishment values for the Class B and the Surface Class A fuels are determined by testing in accordance with
ISO 14520-1:— 3), Annexes B and C.
The minimum design concentration for the Class B fuel is the higher value of the heptane cup burner or room test
heptane extinguishment concentration multiplied by 1,3.
The minimum design concentration for Surface Class A fuel is the highest value of the wood crib, PMMA, PP or ABS
extinguishment concentrations multiplied by 1,3. In the absence of any of the 4 extinguishment values, the minimum
design concentration for Surface Class A shall be that of Higher Hazard Class A.
See ISO 14520-1:— 3), 7.5.1.3, for guidance on Class A fuels.
The extinguishing and design concentrations for room-scale test fires are for informational purposes only. Lower and
higher extinguishing concentrations than those shown for room-scale test fires may be achieved and allowed when
validated by test reports from internationally recognized laboratories.
a The minimum design concentration for Higher Hazard Class A fuels shall be the higher of the Surface Class A or 95 % of the
Class B minimum design concentration.
4
BS ISO 14520-12:2005
5 Safety of personnel
Any hazard to personnel created by the discharge of IG-01 shall be considered in the design of the system.
a) oxygen reduction;
Property Value
% by volume
No observed adverse effect level (NOAEL) 43
Lowest observed adverse effect level (LOAEL) 52
6 System design
The fill pressure of the container shall not exceed the values given in Tables 7, 8 and 9.
The relationships between pressure and temperature are shown in Figure 1 for various levels of pressurization.
5
BS ISO 14520-12:2005
Key
X temperature, °C
Y pressure, bar
a Pressure at 15 °C, in bar.
Figure 1 — Temperature/pressure graph for IG-01 pressurized to 160 bar, 200 bar and 300 bar
6
BS ISO 14520-12:2005
6.2 Superpressurization
The quantity of extinguishant shall be the minimum required to achieve the design concentration within the
hazard volume at the minimum expected temperature, determined using Table 3 and the method according to
ISO 14250-1:— 5), 7.6.
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
The design concentrations shall be those specified for relevant hazards in Table 4, including a 1,3 safety
factor on the extinguishing concentration.
Consideration should be given to increasing this for particular hazards, while seeking advice from the relevant
authority.
7
BS ISO
14520-12:2005
BSI — British Standards Institution
BSI is the independent national body responsible for preparing
British Standards. It presents the UK view on standards in Europe and at the
international level. It is incorporated by Royal Charter.
Revisions
British Standards are updated by amendment or revision. Users of
British Standards should make sure that they possess the latest amendments or
editions.
It is the constant aim of BSI to improve the quality of our products and services.
We would be grateful if anyone finding an inaccuracy or ambiguity while using
Licensed copy: Roger Baroudi, SSHIC International, Version correct as of 21/07/2011 09:14, (c) BSI
this British Standard would inform the Secretary of the technical committee
responsible, the identity of which can be found on the inside front cover.
Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.
BSI offers members an individual updating service called PLUS which ensures
that subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should be
addressed to Customer Services. Tel: +44 (0)20 8996 9001.
Fax: +44 (0)20 8996 7001. Email: [email protected]. Standards are also
available from the BSI website at http://www.bsi-global.com.
In response to orders for international standards, it is BSI policy to supply the
BSI implementation of those that have been published as British Standards,
unless otherwise requested.
Information on standards
BSI provides a wide range of information on national, European and
international standards through its Library and its Technical Help to Exporters
Service. Various BSI electronic information services are also available which give
details on all its products and services. Contact the Information Centre.
Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: [email protected].
Subscribing members of BSI are kept up to date with standards developments
and receive substantial discounts on the purchase price of standards. For details
of these and other benefits contact Membership Administration.
Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001.
Email: [email protected].
Information regarding online access to British Standards via British Standards
Online can be found at http://www.bsi-global.com/bsonline.
Further information about BSI is available on the BSI website at
http://www.bsi-global.com.
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies. Except as
permitted under the Copyright, Designs and Patents Act 1988 no extract may be
reproduced, stored in a retrieval system or transmitted in any form or by any
means – electronic, photocopying, recording or otherwise – without prior written
permission from BSI.
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
BSI written permission of BSI must be obtained.
389 Chiswick High Road Details and advice can be obtained from the Copyright & Licensing Manager.
London Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553.
Email: [email protected].
W4 4AL