227 kW (Stage IIIa)

231 kW (Stage V)
200 kW (Electro)
53 t
Mobile material handling machine
20 m

V
a ge
St
 Advanced. The E-Series

What makes up the E-Series

ƒ More than 65 years of experience in designing
and constructing hydraulic material handling
machines
ƒ Uncompromisingly high performance in all
areas: Focus on material handling
ƒ Technology that can be mastered: High-
quality components without over-engineering
ƒ Long product service life and high value
retention
1962: Rope-driven S833 with
elevated operator cab

Your top benefits

Green Efficiency
1 Save fuel - reduce operating costs
Work quietly - protect operator and environment

Peak performance
2 Durable mechanical systems - stressed parts optimized
High speeds - high load capacities

Maximum usability
3 Comfortable Maxcab operator cab - relaxed work
SENCON - work program selection made easy

Maximum safety
4 Safe entry and exit - no-slip steps
State-of-the-art camera - entire work area in view

Maintenance and service made easy

5 SENNEBOGEN Control System SENCON - easy fault diagnosis
Easy Maintenance - clear labeling

Consultation and support in your area

6 3 production sites - 2 subsidiaries
more than 180 sales partners - worldwide and also in your area

2
Subject to technical changes. Further options available upon request. 3
 The E-Series. At a glance.

Four ways to save fuel

ƒ Up to 20% savings: working in Eco Mode
Work Idle Stop with reduced engine speed
ƒ Idle automation reduces speed to 40% of
operating speed
ƒ Stop automation switches the engine off
1800 ECO 1400 800 0
RPM RPM RPM RPM
when not needed
0s 5s 8s 5 min ƒ Optimized settings of engine and hydraulics
reduces fuel consumption

Quiet operation 3 High-capacity cooling 4

ƒ Consistently quiet operation thanks to decoupled ƒ Constant, reliable performance thanks to large-
engine mounts and soundproofing in the doors dimensioned and robust fans and coolers
ƒ Soundpower level according to 2000/14/EC up to ƒ Water and oil coolers with top-notch efficiency
2 dB lower than required thanks to axial-piston pump and motor
control and ondemand thermostatic control
ƒ Fan reversal for cleaning in series

4 Subject to technical changes. Further options available upon request.

 Maximum safety
ƒ No-slip work surfaces
ƒ Hand rails* 1
ƒ 2 cameras to the right and to the rear
ƒ Step grid with railing next to cab sli-
ding door 2

Powerful hydraulic system 5

ƒ Strong pumps with power reserves

ƒ Top efficiency thanks to large-dimensioned
hydraulic valves and lines
ƒ Extra-long change intervals of 4,000 opera-
ting hours through initial fill-up with special
oil with extended service life when using
SENNEBOGEN HydroClean*

Subject to technical changes. Further options available upon request. *Option 5

 The premium cab.

Features
ƒ optimum cab climate with automatic
air conditioning system, partial tinted
glass

ƒ pleasant and equal temperature disper-

sion by means of 9 nozzles
ƒ panoramic view

ƒ comfort seat with air suspension

ƒ very quiet through optimized noise

insulation
ƒ Highest safety & comfort with sliding
door, wide door opening

ƒ ergonomically arranged operating con-

trols for fatigue-free and relaxed working

r ƒ 12 V, 24 V, and USB charging sockets

o hands-free telephone preparation, do-
o cument box
d
g
ni ƒ various options: electric
tric cool box behind
d SE operator`s seat, protective
ective covers, seat
li N
CO air conditioning
S
N

„ consoles and ergonomic joysticks

ticks
that move with the seat
„ pleasant grip through ergonomic
mic design
„ precise control of all movements
ents
through direct and sensitive
function activation
„ quick access to all operating
controls through optimized
design of all push-buttons
and switches

6
 Maintenance and service made easy.

Optimized for
maintenance
ƒ Fast and easy diagnosis thanks to
straightforward and clearly labeled
electrical distributor
ƒ Easy access to all service points
on the machine
ƒ Automatic central lubrication for
equipment and slewing gear

SEN
SENNEBOGEN Central measuring points Clear labeling
Hydro Clean*
Hyd
ƒ Optim
Optimal protection of ƒ Easily accessible ƒ All parts labeled with a unique
hydraulic components
hydr ƒ Quickly inspect entire hydraulic part number
than
thanks to 3 μm micro- system ƒ Easy and reliable spare parts
filter ordering
ƒ Clean
Cleaner hydraulic oil,
longer service life
longe

* Option 7
 Modular structure - versatile solutions

Attachments Equipment (additional equipment on request)

Orange peel grab

Clamshell grab

Magnet plate

Scrap shears

Cab elevation K17 K18 B18 B19 K20

3,00 m

Maxcab
2,60 m

E300/260
Uppercarriage
M Diesel-hydraulic drive
2,70 m

Electro-hydraulic drive
E270
Maxcab Industry

Options Motorized cable reel

Transformer

Variants undercarriage

max. 2.5 m
max. 1 m max. 2 m max. 3 m

Mobil E Crawler* Crawler Special * 4-point-pedestal

MP42 R44/380 R44/400 ST48/400

8 * Additional information on our crawler undercarriages can be found in the separate 840 R E-Series brochure
 Advantages at a glance

Reliable work through

robust and FEM-optimized
equipment

Sliding door for convenient

entry and exit, step grid
with railing

Better illumination of the

work area through power-
ful LED headlights*

Ideal overview and safe

High load capacities even working height, thanks to
when fully extended, thanks stable cab elevation
to massive cylinders

Safe entry and exit

Robust side cover
thanks to railings*,
of recyclable
grip handles and
steel sheet
non-slip steps

Robust slewing
High stability gear (2x) for fast
due to the broad work cycles and
outrigger area highperformance
material handling

* Option
9
 Technical data, equipment

Options Electrical hydraulic tank pre-warming at

MACHINE TYPE temperatures under -20 °C Low temperature
Model (type) 840 packages
Hydraulically-driven magnetic generator 20 kW
Telematic system SENtrack DS
MOTOR
Power Stage V:
Rated Power: 231 kW at 2100 rpm
HYDRAULIC SYSTEM
237 kW at 2000 rpm / 242 kW at 1800 rpm Load sensing / LUDV hydraulic system, hydraulic, pilot-controlled
Stage IIIa: work functions, load limit sensing control
Rated Power: 227 kW at 2000 rpm Pump type Variable-displacement piston pump in swash-
254 kW at 1800 rpm plate design, load pressure-independent flow
Model Cummins L9 distribution for simultaneous, independent
Direct injection, turbo charged, charge air cooling, control of work functions
reduced emissions, ECO mode, idle automation, Pump control Zero-stroke control, on-demand flow-control
stop automation, fuel pre-warming - the pumps only pump as much oil as will
Cooling Water-cooled, direction of rotation actually be used, pressure purging, load limit
changeover of the cooler fan sensing control
Diesel filter With water separator and heater Delivery rate maximum 740 l/min
Air filter Dry filter with integrated pre-separator, Operating to 350 bar
automatic dust discharge, main element and pressure
safety element, contamination indicator Filtration High-performance filtration with long-term
Fuel tank 625 l change interval
DEF tank 75 l Hydraulic tank 500 l
Electr. system 24 V Control system Proportional, precision hydraulic activation of
Batteries 2 x 150 Ah, battery disconnect switch work movements, 2 hydraulic servo joysticks
for work functions, supplemental functions via
Options Engine block pre-warming at temperatures switches and foot pedals
under -20 °C
Electric fuel pump Safety Hydraulic circuits with safety valves, secured
emergency lowering of the equipment at en-
gine standstill, pipe fracture safety valves for
UPPERCARRIAGE lift cylinder and stick cylinder
Design Torsion-resistant box design, precision crafted, Options Bio-oil filling ecologically sound
steel bushings for boom bearing arrangement Tool Control for easy change of attachments
Extremely service-friendly concept, Supplemental hydraulic circuit for attach-
engine installed in the longitudinal direction ment of shears
Central Autom. central lubrication for equipment and Load moment warning with overload shut-
lubrication slewing ring down
Overload safeguard with overload shutdown
Electrical Central electrical distributor, battery 3 μm micro filter system SENNEBOGEN
disconnect switch HydroClean
Cooling system 3-circuit cooling system with high cooling output,
thermostatically regulated fan drive for oil cooler SLEWING DRIVE
and water cooler, fan reversal for cleaning
Gearbox Compact planetary gear with bent-axis
Options Slewing gear brake via foot pedal
hydraulic motor, integrated brake valves
Hand rails at the upper structure
LED light packages Parking brake Spring-loaded disk brake
Fire extinguisher Slewing ring External gear slewing ring with 360°
Sea climate resistant coating protection and pinion tooth lubrication
Slewing speed 0-8 RPM, stepless

10 Subject to change.
 Technical data, equipment

CAB UNDERCARRIAGE
Cab elevation E270, hydraulically elevating cab Design Mobile undercarriage with integrated 4-point
outrigger, steering axle as hydraulically locking
Cab equipment Sliding door inc. sliding pane, vibration
pendulum axle, pendulum axle cylinder with pipe
damped, tinted safety glass, front pane can
fracture safety valves, type MP42
be openend, roof window, windscreen wiper
for front pane, radio preparation, air-suspended Drive All-wheel drive powered by a variable-displace-
comfort seat, joystick steering, SENNEBOGEN ment hydraulic motor with direct-mounted, au-
SENCON control & diagnosis system tomatically actuated brake valve and planetary
axles with integrated steering cylinders, service
Options ƒ Cab elevation E300/260, can be elevated brake in 2-circuit system
and moved forward hydraulically
ƒ Maxcab Industry Parking brake Spring-loaded disk brake
ƒ Armored-glass windshield Tires 12.00-24, 8x, option: 14.00-24, 8x
ƒ Armored-glass sunroof
Speed 0-14 km/h, stepless
ƒ Safety side window and rear window
ƒ Windscreen wiper for front window/ Options Individual activation of the outriggers for firm
skylight stance on uneven substrate
ƒ Rolling shade for roof window and Protection for travel drive
windshield Shunting coupling
ƒ FOPS protective roof guard Pylon extension
ƒ Protective front guard
ƒ Charcoal filter for circulating and outside air ELECTRIC DRIVE
ƒ Auxiliary heating
ƒ Climatic seat Option ƒ Power: 200 kW, 400 V, 50 Hz
ƒ Radio Total connected load 340 kVA, machine-
ƒ Electric cool box provided 400 A fuse (alternatively 425 A
with magnet system) for 400 V – star-
delta connection motor start
ƒ Advantages: Lowest operating costs, quiet
EQUIPMENT and virtually vibration-free work, long
service life of hydraulic components
Design Decades of experience, state-of-the-art com-
puter simulation, highest level stability, longest
service life, large-dimensioned bearing points,
sealed special bearing bushes, precision-crafted,
OPERATING WEIGHT
quick-release couplings on the grab connections Mass approx: 53,000 kg
- open/closed/rotate Basic machine 840 M with
attachment K18 and
Cylinders Hydraulic cylinders with high-quality sealing
600 l orange peel grab
and guide elements, end position damping,
sealed bearing points Note The operating weight varies
depending on the design.
Options ƒ Ball valves on the hydraulic lines grab open,
closed, rotate
ƒ Kinematic position II for greater working
depth
ƒ Sea climate resistant coating
ƒ Float position for equipment
ƒ Lift limitation / stick limitation adjustable
for the stop settings, for example in the hall

Subject to change. 11
 Lift capacities
20
7.9
K17 18
8.1 6.8 Kinemat. Position I
16
9.0 8.1 6.9

9.7 9.1 8.2 6.8 14

10.4 10.0 9.1 8.0 6.3

12
11.3 10.4 9.2 8.2 7.4 5.3
10
12.4 12.4 10.7 9.3 8.3 7.4 6.7

14.2 15.8 13.0 11.0 9.5 8.4 7.5 6.7 4.8 8

23.7 17.3 13.7 11.4 9.7 8.5 7.5 6.6 5.8

6
18.4 14.3 11.7 9.9 8.6 7.5 6.6 5.7
4
8.5 14.5 11.8 9.9 8.5 7.4 6.4 5.5

5.4 14.1 11.7 9.8 8.4 7.2 6.2 5.2 2

2.4 5.0 10.1 11.2 9.4 8.0 6.9 5.9 4.8

0
Machine shown
mirror image 5.3 9.0 10.3 8.8 7.5 6.4 5.3 4.2

-2
8.9 9.0 7.8 6.7 5.6 4.5

6.5 5.5 -4

-6

-8

I.06102008151743
-10
0 2 4 6 8 10 12 14 16 18 20

Undercarriage MP42E Compact boom 10.6 m Cab Maxcab E270,

Grab stick 7.1 m hydraulically elevating

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

12 Technical data and dimension information subject to change.

 Lift capacities
20
6.8 5.5
K18 18
7.7 6.9 5.7 Kinemat. Position I
16
7.7 6.8 5.6

8.3 7.7 6.7 5.3 14

8.9 8.4 7.6 6.5 4.7

12
9.7 9.6 8.8 7.9 7.2 5.9
10
10.6 10.2 9.0 8.0 7.2 6.6 4.7

11.7 12.4 10.6 9.2 8.2 7.3 6.6 5.7 8

15.6 16.4 13.2 11.0 9.5 8.3 7.4 6.6 5.9

6
24.6 17.7 13.9 11.4 9.7 8.4 7.4 6.6 5.8
4
4.3 18.1 14.3 11.7 9.8 8.5 7.4 6.5 5.7 4.4

2.7 7.4 14.4 11.7 9.8 8.4 7.3 6.3 5.4 4.5 2

2.8 5.7 12.3 11.4 9.6 8.2 7.0 6.1 5.1

0
Machine shown
mirror image 3.3 5.5 9.8 10.8 9.1 7.7 6.6 5.6 4.6

-2
5.7 9.1 9.7 8.3 7.1 6.0 5.0 3.9

9.1 8.3 7.2 6.1 5.1 4.1 -4

-6

-8

I.02102008155514
-10
0 2 4 6 8 10 12 14 16 18 20

Undercarriage MP42E Compact boom 10.6 m Cab Maxcab E270,

Grab stick 8.0 m hydraulically elevating

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

Technical data and dimension information subject to change. 13

 Lift capacities
20
4.7
B18 18
6.1 5.0 Kinemat. Position I
5.0 16
6.2 5.0

7.2 6.2 4.8 14

7.5 6.8 5.9 4.2

12
8.5 7.6 6.9 6.3 5.4
10
8.8 7.8 7.0 6.4 5.9 4.3

10.8 9.2 8.1 7.2 6.5 5.9 5.3 8

19.3 14.4 11.6 9.7 8.4 7.4 6.6 6.0 5.4

6
16.8 15.9 12.4 10.2 8.7 7.6 6.7 6.0 5.4
4
4.0 12.8 13.1 10.6 9.0 7.8 6.8 6.1 5.4

2.9 6.8 13.4 10.9 9.1 7.8 6.8 6.0 5.4 2

3.1 5.6 10.6 10.9 9.1 7.8 6.8 6.0 5.2

0
Machine shown
mirror image 3.6 5.4 8.8 10.6 8.9 7.6 6.6 5.8 5.0

-2
4.1 5.5 8.2 10.0 8.5 7.3 6.3 5.4 4.6

5.8 8.2 9.2 7.9 6.8 5.8 4.9 -4

8.4 8.1 7.0 6.0 5.1 4.2

-6

-8
I.02102008134628

-10
0 2 4 6 8 10 12 14 16 18 20

Undercarriage MP42E Compact boom 11.0 m Banana Cab Maxcab E300/260, hydraulically
Grab stick 8.0 m elevating and forward moving (option)

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

14 Technical data and dimension information subject to change.

 Lift capacities
20

18
4.7
B18
Kinemat. Position II
16
5.3 4.2

5.4 5.2 14

5.5 5.3 4.4

12
6.1 5.7 5.4 5.1
10
7.2 6.5 6.0 5.6 5.3

13.7 10.7 8.9 7.8 6.9 6.3 5.8 5.4 4.1 8

3.9 14.0 12.1 9.8 8.3 7.3 6.6 6.0 5.5 4.5
6
2.6 6.7 13.2 10.6 8.9 7.7 6.8 6.2 5.7 4.7
4
2.8 5.3 10.3 11.2 9.3 8.0 7.1 6.4 5.8
2.5 m
3.3 5.1 8.5 11.6 9.7 8.3 7.3 6.5 5.8 2

3.8 5.3 7.9 11.8 9.8 8.4 7.4 6.5 5.8

0
Machine shown
mirror image 4.3 5.6 7.8 11.7 9.8 8.4 7.3 6.5 5.7
-2
4.7 5.9 8.0 11.4 9.6 8.2 7.2 6.2

6.3 8.3 10.7 9.1 7.8 6.7 5.7 -4

9.7 8.3 7.1 6.0
-6

-8

II.04112008112744

-10
0 2 4 6 8 10 12 14 16 18 20

Undercarriage MP42E Compact boomboom11.0 m

Compact Banana
11.7 m Cab Maxcab E300/260, hydraulically
Pylon 2.5 m Grab Loading
stick stick 8.0 m9.4 m and forward moving(option)

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

Technical data and dimension information subject to change. 15

 Lift capacities
20

B19 18
3,8 Kinemat. Position II
16
4,5 3,3

4,5 4,2 14

4,6 4,4 3,3

12
5,0 4,7 4,5 3,9
10
5,7 5,3 4,9 4,6 4,4

6,8 6,1 5,5 5,1 4,8 4,5 8

3,9 19,0 13,3 10,3 8,5 7,3 6,5 5,8 5,3 4,9 4,6
6
1,6 5,0 13,9 11,6 9,4 7,9 6,9 6,1 5,6 5,1 4,7
4
1,8 3,6 7,2 12,6 10,1 8,4 7,3 6,4 5,8 5,3 4,8
2.5 m
2,3 3,5 5,8 10,5 10,7 8,9 7,6 6,7 5,9 5,4 4,9 2

2,8 3,7 5,4 8,6 11,0 9,1 7,8 6,8 6,1 5,4 4,9
0
Machine shown
mirror image 3,2 4,0 5,4 7,9 11,1 9,3 7,9 6,9 6,1 5,4 4,8
-2
3,5 4,3 5,5 7,7 11,1 9,3 7,9 6,9 6,0 5,3

4,5 5,7 7,8 10,7 9,0 7,7 6,7 5,8 5,0 -4

6,0 8,0 10,1 8,5 7,3 6,3 5,3

-6
9,1 7,7 6,6 5,5
-8

-10

20130404084400
-12
0 2 4 6 8 10 12 14 16 18 20 22

Undercarriage MP42E Compact boom 11.0 m Banana Cab Maxcab E300/260, hydraulic elevating
Pylon 2.5 m Grab stick 9.4 m and forward moving (option)

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

16 Technical data and dimension information subject to change.

 Lift capacities
5,5 22

5,6 4,7 K20 20

6,3 5,6 4,8 Kinemat. Position I
18
6,2 5,6 4,7
16
6,7 6,2 5,5 4,5

7,1 6,7 6,1 5,3 4,1 14

7,7 7,6 7,1 6,4 5,8 4,9 3,3

12
8,2 8,1 7,2 6,5 5,8 5,3 4,2
10
9,1 8,3 7,3 6,5 5,9 5,3 4,7

10,1 9,8 8,5 7,4 6,6 5,9 5,3 4,7 3,7 8

11,0 12,9 12,2 10,2 8,7 7,5 6,6 5,9 5,3 4,7 4,1
6
22,8 16,4 12,8 10,5 8,8 7,6 6,7 5,9 5,2 4,6 4,0
4
4,1 17,0 13,1 10,6 8,9 7,6 6,6 5,8 5,1 4,5 3,9

2,2 6,1 13,1 10,6 8,9 7,6 6,6 5,7 5,0 4,4 3,7 2

2,1 4,4 9,3 10,3 8,7 7,4 6,4 5,5 4,8 4,1 3,4
0
Machine shown
mirror image 2,5 4,1 7,3 9,8 8,3 7,1 6,1 5,3 4,5 3,8 3,0
-2
4,3 6,7 9,0 7,7 6,6 5,6 4,8 4,1 3,4 2,5

4,5 6,6 7,9 6,8 5,9 5,0 4,3 3,5 2,8 -4

6,5 5,7 5,0 4,2 3,5

-6

-8

20130404103509

-10
0 2 4 6 8 10 12 14 16 18 20 22

Undercarriage MP42E Compact boom 11.7 m Cab Maxcab E270,

Grab stick 9.4 m hydraulically elevating

All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks,
etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In
accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and
stick cylinders and an overload warning device. Load ratings apply to a machine with deployed 4-point outrigger support and 360° slewing.

Technical data and dimension information subject to change. 17

 Grab recommendation
Orange peel grab SGM (4 shells) Weight1 max.
Design / size Grab content
Shell shape piled density

HO G
SGM l kg kg t/m3
400.40-4 400 1570 1720
600.40-4 600 1600 1790
800.40-4 800 1685 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200 2.0
800.50-4 800 2245 2490
1000.50-4 1000 2345 2585
1500.50-4 1500 2420 2830
2000.50-4 2000 2660 3075
Orange peel grab SGM (5 shells)
Weight1 max.
Design / size Grab content
Shell shape 2 piled density

HO G
SGM l kg kg t/m3
400.40 400 1800 1910
600.40 600 1900 2020
800.40 800 1950 2120
1000.40 1000 2030 2280
1250.40 1250 2180 2420
2.0
1400.40 1400 2190 2460
800.50 800 2510 2660
1000.50 1000 2650 2760
1500.50 1500 2790 3030
2000.50 2000 2930 3210
2500.50 2500 3200 3500
3000.50 3000 3260 3880 1.5
Clamshell grab SGZ 3500.50 3500 3420 4140

max.
Design / size Grab content Weight1
piled density

SGZ l kg t/m3
1500.50 1500 2100
2.6
2000.50 2000 2310
2500.50 2500 2530
2.0
3000.50 3000 2830

Magnetic plates 4000.50 4000 3050 1.6

Pull-off Load-bearing
Type series / model Power Deadweight
strength capacity in kg

WOKO kW kg kN Bramme
(safety factor 2)
S-RLB 13,5 10.0 1700 300 15000
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
Recommended magnetic generator 20 kW

1 2
*) On request ) Weight information without grab ) Half-open shells: Shell sheet steel 400 mm wide,
suspension, stick bolts, hose system from content 1250 l shell sheet steel 500 mm wide

Detailed information concerning the grabs, as well as log grabs, quick-release systems, and
18 other attachments is provided in the "Attachments" brochure
Dimension information in [mm]
 Dimensions

3000
3350

6690

3695
3690
2600 2861

840 M with Maxcab and cab elevation E300/260, can be elevated and moved forward hydraulically

2650

3350
3674
674 3000
6300

1250
3650

2937
1687
190
312

310

3480 3600
5068 6204
5593 6829
7108

840 M with hydraulically elevating cab type E270, transport width 3500 mm

5057
3000

3000
9050

6430
6050

2600
5300
4050
3570
310

190
312

3480 3600
5051 6204
5576
6829
7108

840 M with Maxcab and cab elevation E300/260, hydraulically elevating and forward moving

Technical data and dimension information subject to change. 19

 L
H

Transport dimensions 840 M with undercarriage type MP42E

Load boom Grab stick Transport length (L) Transport height (H)
K17 10.6 m 7.1 m 15.2 m 3.65 m
K18 10.6 m 8.0 m 15.2 m 3.65 m
B18 11.0 m banana 8.0 m 15.5 m 3.7 m
B19 11.0 m banana 9.4 m 15.5 m 3.65 m*
K20 11.7 m 9.4 m 16.2 m 4.2 m (3.65 m*)
* Stick is dismounted

This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines delivered by
SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary in a tolerance range depending on the
country to which the machines are delivered, especially in regard to standard and optional equipment

All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may
violate the rights of the owners.
Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are
expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change,
and rights of advancement are reserved.
© SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing,
Germany.
840M-E-011615-021910-1119du-200710
BestellNr. / Item No. 179538

SENNEBOGEN
Maschinenfabrik GmbH
Sennebogenstrasse 10 Tel. +49 9421 540-144/146
94315 Straubing, Germany [email protected]

www.sennebogen.com