1 Answer The Following Questions
1 Answer The Following Questions
25 A double riveted, zig-zag butt joint, in which the pitch of the rivets in the outer row is twice that in the
inner rows; connects two 16 mm plates with two cover plates, each 12 mm thick. Determine the
diameter of the rivets and pitch of the rivets and pitch of the rivets, if the working stresses are: σt =
100 MPa, σc = 150 MPa, and τ = 75 MPa.
26 Find the diameter of a solid steel shaft to transmit 20 kW at 200 r.p.m. The ultimate shear stress for
the steel may be taken as 360 MPa and a factor of safety as 8. If a hollow shaft is to be used in
place of the solid shaft, find the inside and outside diameter when the ratio of inside to outside
diameters is 0.5.
27 Select a single row deep groove ball bearing for a radial load of 4000 N and an axial load of 5000 N,
operating at a speed of 1600 rpm for an average life of 5 years at 10 hours per day. Assume uniform
and steady load.