Excavators

DX490LC-7M

HDIPBE-01-2305
Photos may include optional equipment
1 2
THE VICTOR
FIERCE PERFORMANCE
DX490LC-7M is powered by Scania electronical engine which
delivers superior performance. Impressive breakout force and
high traction make penetration easy and allow you to handle the
hardest materials. Power and athletic balance of powerful hydraulic

The Brave New Victor for Any Serious Work systems will make your work quick and efficient.

The Conqueror on the Top of the Chain INTELLIGENT SYSTEM IN RAW ATHLETICISM
DX490LC-7M’s functional and intelligent in-and-out design deliver
Brave new victor, armed with endurance. Fierce but measured. Solid and you efficiency and total control. SPC system automatically controls
taut, authentic and balanced. First to go beyond and foremost to stand still engine RPM to supply proper torque depending on workload to
through time. From the outset, DX490LC-7M is designed to deliver pure serve best fuel efficiency. Unique and future-oriented connectivity
power and outstanding performance. To the last, DX490LC-7M, was made harmoniously interact with intelligent assistance systems.
to take a long firm stand to return in triumph.

This robust and reliable partner especially excels in demanding sites.

Unparalleled bucket and arm digging forces give DX490LC-7M a heavy
ENHANCED COMFORT WITH BUILT TO STAND STILL
blow. Widest undercarriages in class perfectly hold up the weight to take The widest undercarriages in the 50 ton class hold DX490LC-7M up
up a neutral, composed stance. All these power find their way with the tightly to give a composed stance. Reinforced castings and forged
next lap of the progressive technologies. DX490LC-7M will show you steel pivot points go together with heavy-duty arm and boom to
withstand high-impact materials. Large, robust boom and arm
outstanding productivity and performance to handle the most severe,
cylinders are equipped for smooth and powerful operation.
heavy duty applications.

Under the pressure, under the weight, these fearless last ditchers will be
sculpted on form of success. DX490LC-7M, the victor to add glory and
confidence to your business.

3 4
HEATING AND COOLING SEAT (OPTIONAL)
The air- suspended, climatized driver’s
suspension seat provides pleasant seating
WE ARE BACK
WITH NEW FEATURES
conditions and a high level of comfort.

REINFORCED BOOM AND ARM

Reinforced castings and forged steel pivot
points. Reinforced heavy-duty arm and boom
All the Nice Features of Previous Model
with new optional boom floating system. To
better protect the base of the arm, reinforced Bodily Succeeded, Even Nicer Things to Come
bars have been added and the arm center and
end boss have been strengthened.

AIR COMPRESSOR (OPTIONAL) ETP (ELECTRIC TRANSFER PUMP) (OPTIONAL)

Easily lubricated, highly reliable and low Electric transfer pump enables to change speed
HEAVY-DUTY UNDERCARRIAGE maintenance air compressors are equipped. of front movement depending on the hydraulic
Heavy duty X- shaped undercarriage with flow consumption of linked attachment. Upgraded
integrated track spring and idler. Offered with operational ease guarantees linear and smooth
durable box section track frame. The sprocket movement of attachment.
structure and tooth have been strengthened
to prevent debris and increase durability.

ROPS CABIN (OPTIONAL)

The ROPS certified cab provides you with a safe
WATER SEPARATOR working environment. It also one of the most
A filter-type high-performance water spacious cabs in the market, with low noise &
separator effectively filters moisture out vibration levels and excellent all-around visibility.
in the fuel, reducing impurities and helping
minimize engine issues.

SINGLE CATWALK
Makes maintenance safe and easy.
LARGE CAPACITY BUCKETS The upper structure features a larger
Bucket robustness fortified by increased anti-slip surface for greater safety.
the area of the abrasion resistant plate.
Selectable up to 3.8m3 to fit a variety of
applications.

DEVELON FLEET MANAGEMENT

(OPTIONAL)
Offering ‘preventive maintenance service’
based on machine operating data. Providing
an expert level consultation to dealers.
Functioning as fleet management tool for
the customers.

ADDITIONAL LED WORKING LAMP (OPTIONAL)

New additional LED working lamp contributes to
enhanced safety through improved illumination.

*Option spec info is included to the images contained in this material and may not be the same with the actual specs.
5 6
NATURAL BORN
PREDATOR
Peerless Power, Fearless Performance
Pushing the Boundaries of Excavator
Through the Limit

Challenge what’s possible. DX490LC-7M delivers raw athleticism

for you to take even the heaviest work with ease. Construction
projects, mass excavation, heavy-duty mining or whatever
your role is, supercharged Develon in-house engine provides
excellent force and torque characteristics. Incomparable lifting
capacity and improved swing torque provides faster cycle
time. Push harder and dig deeper with high lifting capacity and
stability.

Another key for performance ascent is the innovative

combination of smart features. A redesigned EPOSTM hydraulic
system ensures the engine power to be exactly delivered
with an attractive cost-performance ratio. Optionally available
electronically controlled hydraulic pump efficiently changes
speed of front movement depending on the hydraulic flow
consumption of attachment usage. Take the control of
untamed. DX490LC-7M would show wide range of performance
to let you adjust it on your term.

SWING DRIVE
Swing drive minimizes shock during rotation, while making increased torque available to ensure rapid cycles.

EPOSTM (ELECTRONIC POWER OPTIMIZING SYSTEM)

The smart EPOSTM provides a perfectly synchronized communication link between the engine’s electronic control unit
and the hydraulic system. A CAN (Controller Area Network) system enables a constant flow of information between
the engine and hydraulic system, to ensure power is delivered exactly as needed.

SCANIA DC13 ENGINE – T3

The DX490LC-7M is powered by economic and powerful Scania DC13 engine. Advanced
DC13 engine delivers a superior performance. High-pressure fuel injection and precise
timing provide optimized fuel consumption. High power and wide torque range at low RPM,
which can also reduce the strain on the clutch and transmission. Delivering performance
which can be adapted to your various needs, for maximum productivity.

HYDRAULIC PUMP
Electronically control the pump by generating virtual hydraulic flow, which effectively works
on effectively reduce fuel consumption and high productivity. This control enables to change
speed of front movement depending on the hydraulic flow consumption of linked attachment.
Upgraded operational ease guarantees linear and smooth movement of attachment. Hydraulic
flow can be controlled by the intuitive button or switch.

7 8
TIME-HONORED Strive for perfection. DX490LC-7M is nature born
pioneer who has challenged the difficult work by
optimized structure. The exceptionally long and wide

DURABILITY
undercarriage, allow the operator to perform tough
and heavy workloads in the most stable manner.
Durable materials and extensive testing ensure long-
term reliability. The D-profile frame and x-chassis
add strength, while the arm assembly is reinforced
for longer life. Increased lifespan of components by
Structure Honed and improved abrasion-resistance and additional protection.

Perfected for Countless Time Collection of all virtues accumulated by Develon’s

history, DX490LC-7M offers outstanding quality
underpinned by unflagging engineering and extensive
testing. Enhanced durability achieved through applying
highly robust materials to structures of overall frames.
Lasting technology and structural design completed by
thorough analysis, enable Develon’s equipments to last
under the harshest conditions.

9 10
 EM BUSHING
The boom pivot is made with a highly lubricated metal
to increase the lifespan and extend greasing intervals to
250 hours. cancellation and anti seizure property. Used
polymer shim with hard metal disk for less abrasion.
Heavy Duty Boom and Arm
ABRASION-RESISTANT ARM END DISK A A. CENTER BOSS PLATE
New disks have been adopted to increase wear Size increased 40%
resistance and service intervals.

B. BOOM END BRACKET

B
Single piece of casting type

C. ARM BOTTOM PLATE

INTEGRATED TRACK SPRING AND IDLER Increase plate thickness 20%
The track spring and idler have been joined directly
for even greater durability and improved maintenance
convenience. The reinforced idler frame, track links C D. ARM SIDE PLATE
and bottom rollers are built to withstand tough Increase plate thickness 15%
conditions for improved durability and reliability in F
demanding applications. D
E. HEAVY DUTY BUCKET
New larger bucket
HEAVY DUTY UNDERCARRIAGE
Advanced undercarriage with strengthen sprocket
structure and tooth. Offering increased durability F. BOOM PLATE
by providing additional protection to the underside
Increase boom foot height and decrease
of the machine in tough applications -preventing
width Increase plate thickness 15%
damage from rock and debris .Heavy duty X- shaped
undercarriage ensures optimum structural integrity
and durability. Cast steel heavy-duty sprockets F
guarantee the highest resistance and thick and
solid plates providing maximum durability in harsh
conditions.

LARGER AND WIDER TRACK

DX490LC-7M (Retracted Track optional) is equipped
with tracks that is up to 3.9 m wider and up to 5.5 m
longer, contributing to greater safety and productivity.

11 12
 FUEL RESTRAINT
EQUALS SAVINGS
Unwavering Commitment to Efficiency and Sustainability
DX490LC-7M offers the best conditions for delivering performance in the most cost-effective way. With reliable technology
geared to the task, low fuel consumption and the accumulated experiences. Advanced systems combined with innovative
integration, result in significantly increased performance and fuel efficiency.

Broad range of powertrain options and transmission provide an efficient delivery of power on various terrains and conditions.
A standard auto-idle feature which automatically puts the engine and pump into the standby mode when it detects a pause.
Develon’s engine and pump matching technology, not only economical but also environmentally responsive with significantly
reduced exhaust fumes. DX490LC-7M’s comprehensive range of innovative technology ensure you to do more with low fuel
consumption and overall operating costs.

PUMP MATCHING TECHNOLOGY

Pump matching technology resolves problems as the low response time of
the system and unnecessary fuel consumption. Matching the response time
between pump and engine efficiently reduces unnecessary fuel consumption
as well as reducing exhaust fumes.

Main Pump 100% Engine

POWER UP

RELIEF CUTOFF AUTO IDLE POWER MODE

DX490LC-7M is equipped with a A standard auto-idle feature reduces (P+mode / P mode / S mode / E mode)
relief cutoff system. The system engine rpm when the steering wheel Four different power modes give you
automatically detects excess hydraulic or joystick isn’t being used. The system precise control over the excavator’s
pressure in the cylinder and controls automatically puts the engine and powertrain. The system automatically
it by redirecting the hydraulic flow pump into the standby mode when it identifies working mode and adjusts
back to the main pump. Relief cutoff detects a pause during operation. The engine RPM to supply proper pump
system distributes excessive pressure engine will be automatically switched torque. Potential fuel consumption
in hydraulic components to be off when the machine is inactive for a significantly reduced compared to
maintained in the optimal state. pre-set amount of time. This function permanently maintaining the
helps reduce fuel consumption and same mode.
noise.
13 14
IN COMFORT,
IN CONTROL
Your Workstation with Form and Function
Versatility to meet all your needs, while the exemplary levels of comfort are complemented by a range of
innovative features. DX490LC-7M includes a wide range of features you could possibly need for your task.
Designed to meet operational need thoroughly, the high-definition display control lever and other intuitive feature
bring absolute controllability in your fingertips.

For both bodily comfort and peace of mind, enjoy your enhanced personal space with completely re-designed
cabin interior with climate control systems, air suspension seat and various convenient features. All elements
provided to ensure the operator to work in safe and comfortable condition no matter the work site is. Work will be
altogether more pleasant with DX490LC-7M’s cabin, optimally prepared for both energetic work and relaxed break.

15 16
 1. SMALL DETAILS ADD THE FEELING OF REFINEMENT
Heating and ventilation, air conditioning system
upgraded for pleasant environment.
USB charger is equipped for additional comfort.
Rear sun visor is also equipped for UV protection.

1 2. SPACIOUS CABIN COMFORT

1. SMALL DETAILS ADD THE FEELING OF REFINEMENT
Refined interior with enhanced legroom and
extendable storage space guarantees a serene 2. SPACIOUS CABIN COMFORT
ride to you. A more orderly interior equipped 3. HEATING AND COOLING SEAT (OPTIONAL)
with thoroughly changed comfort accessories. 4. ADDITIONAL LED WORKING LAMP (OPTIONAL)
This ensures operator to have a clear and
5. CONTROL LEVER
uncluttered workplace at all times.
6. AROUND VIEW MONITOR (OPTIONAL)
7. 8-INCH TOUCH SCREEN MONITOR
8. SIMPLE OPERATION
3. HEATING AND COOLING SEAT (OPTIONAL)
2 3 The optional, air-suspended, climatized driver’s
suspension seat provides pleasant seating conditions
and a high level of comfort. Heating and cooling
temperature range segmented in three stage to meet
various customer needs.

4. ADDITIONAL LED WORKING LAMP (OPTIONAL)

4 New additional LED working lamp contributes to 6
enhanced safety through improved illumination.
2 ea (only front side) and 6 ea selectable.
7

5. CONTROL LEVER
Precise control of the equipment increases
versatility, safety and facilitates tricky operations 1
5 requiring great precision. Leveling operations and
the movement of lifted load made easier and safer.
5

6. AVM (AROUND VIEW MONITOR) (OPTIONAL)

The images can be viewed on a monitor in the
interior of the cab. The operator can directly view the 8
area around equipment, when changing implements.
6 Also can have a perfect view of the front structure.

3
7. 8-INCH TOUCH SCREEN MONITOR
New, wider and more user-friendly LCD color monitor
with full access to machine settings and maintenance
data.
7

8. SIMPLE OPERATION
Precise control of the equipment increases
versatility, safety and facilitates tricky operations
requiring great precision. Leveling operations and
the movement of lifted load made easier and safer.
Joystick and switches integrated in control stand for
8 precise operation.
17 18
* Option spec info is included to the images contained in this material and may not be the same with the actual specs.
LONG SERVICE WITH
MINIMUM UPKEEP
Keep Your Engine Turning,
Without Maintenance Stress
We understand that you have a task to complete in time. DX490LC-7M are made up of high quality and low maintenance
components to fit your needs. Flexible upkeep and repair options, as well as planned servicing, would extend the life of your
excavator.

Key maintenance areas are easy to access and centralized grease inlets are designed for simple routine maintenance.
Extensive service network and expert assistance are also readily available, Develon Fleet Management provides you the
operational machine data in an hourly cycle and broad range of service to get the most productivity out of your equipment.
Develon helps you make the most of tyour time.

19 20
 5 7

6 8

5. DRY TYPE PRE-CLEANER 7. CONVENIENT FUSE BOX

The installation of a rotor type pre-cleaner The fuse box is conveniently located in
provides better filtering in dusty a section of the storage compartment
environments. Increase maintenance behind the operator’s seat to provide a
interval resulting in more uptime. clean environment and easy access.

6. AIR COMPRESSOR (OPTIONAL) 8. AIR CLEANER

Easily lubricated, highly reliable and Air cleaner of large capacity removes
low maintenance air compressors are 99% of airborne particles, reducing the
1. SINGLE CATWALK FOR SAFE MAINTENANCE equipped. risk of engine contamination.
Large guard rails are installed along with anti-slip
step and plates. Assuring operator’s safety during
the working hour and offering easy access to the whole
upper structure.

1
2. HYDRAULIC OIL RETURN FILTER
Protection of the hydraulic system has been made more
effective by applying glass fiber filter technology to
the main oil return filter. More than 99.5% of foreign
particles are filtered out, significantly increasing oil
change interval.

2
3. FUEL PRE-FILTER IN WATER SEPARATOR
Highly efficient water separator in fuel to prevent engine
damage by removing moisture. Reducing the risk of
external engine contamination and lengthen the engine’s
lifespan.

3
4. CENTRALIZED GREASE INLETS FOR
EASY MAINTENANCE
The boom & arm grease inlets are grouped for
easy access. Remote grease points make it easier
to lubricate hard-to-reach pins on the lift arm and
articulation system.

21 22
 GLOBAL PARTS NETWORK
Telematics Service (OPTIONAL)
QUALITY-PROVEN MAIN COMPONENTS
TELECOMMUNICATIONS Data flow from machine to web Develon provides fast and precise worldwide delivery of genuine Develon parts through its global PDC (parts distribution center) network.

지도.pdf 1 2023. 4. 11. 오전 11:40

TELEMATICS TERMINAL TELECOMMUNICATION DEVELON FM WEB

Terminal device is installed and connected DEVELON provides Dual mode (Cellular, Satellite) User can monitor machine status from GLOBAL NETWORK
to a machine to get machine data. communication to maximize communication coverage DEVELON FM Web
The global network of the GPDC (Global Parts Distribution Center) maximizes its fill rate by making sure that each center is stockpiled with all
the critical parts required for businesses in its area. The network also minimizes the time and costs required for parts delivery by positioning
TELEMATICS SERVICE BENEFITS Develon and dealer support customers to improve work efficiency with timely and responsive services PDCs close to major markets around the world. Develon PDCs communicate with customers in their time zone, informing them that they are
open for operation, and deliver parts to them as early as possible.
CUSTOMER DEALER DEVELON
Improve work efficiency Better service for customers Responsive to customer’s voice
· Timely and preventive service · Provide better quality of service · Utilize quality-related field data
· Improve operator’s skills by comparing work pattern · Maintain machine value · Apply customer’s usage profile to deveping THE GLOBAL PARTS DISTRIBUTION CENTER NETWORK
· Manage fleet more effectively · Better understanding of market needs new machine
PDCs had been set up as shown below, including Mother PDC in Ansan, Korea. The nine other PDCs include one in China (Yantai), three in USA
(Atlanta, Seattle and Miami), two in Europe (Germany and the UK), one in the Middle East (Dubai) and two in Asia (Singapore and Indonesia).
FUNCTIONS (WEB/APP) Develon Telematics Service provides various functions to support your great performance

Halle in Germany
• GPS • Fuel information • Preventive maintanance • Operation hours Cardiff in the UK
Yantai in China Seattle Atlanta in the USA
Ansan in Korea in the USA
Miami in the USA
Parts Center (MPDC)

M
Jakarta in Indonesia

• Fault code / warning • ADT Productivity • Reports

Y

CM

FUNCTION EXCAVATOR WHEEL LOADER ADT MY

· Location
GPS All models All models All models
· Geo-fence CY

MPDC : Mother Parts Distribution Center PDC : Parts Distribution Center

Operation hours · Daily, Weekly, Monthly report All models All models All models CMY

· Total operation hours

Operation hours All models All models All models
K

· Operation hours by mode

· Preventive maintenance
Maintenance parts All models All models All models
by item replacement cycle
· Fault code
Fault code / Warning All models All models All models PDC
· Machine Warnings on Gauge Panel
· Fuel level BENEFIT
Fuel information All models All models All models
· Fuel consumption
· Dump tonnage Distribution Cost Maximum Parts Shortest Distance/ Real-time Service Minimum
Dump capacity N/A N/A All models Reduction Fill Rate Time Parts Delivery Support Downtime
· Count of Work Cycle

23 24
DIMENSIONS
W1 L1 W1 L1

W2 L2(R1) W2 L2(R1)
W3 W3

H1 H1 H1 H1
H1 H1
H3 H3

H5 H5
H4 H4
H2 H2

W4 W4
L4 L4
W6 L3 W6 L3
W5 W5

VARIABLE TRACK FIXED TRACK

Model DX490LC-7M [metric] Model DX490LC-7M [metric]
Dimension STD OPT1 OPT2 Dimension OPT 1 OPT 2 OPT 3 OPT 4 OPT 5
Boom m 7.1 HD 7.1 HD 7.1 Boom m 7.1 7.1 7.1 6.3 6.3
Arm m 3.35 HD 2.9 3.98 Arm m 3.35 2.9 3.98 2.4 2.9
3 3
Bucket (PCSA) m 2.35/2.6 R2H 2.6/2.72 R2H 2.07 R2H Bucket (PCSA) m 2.6 R2H 2.72 R2H 2.07 R2H 2.91 R2H 2.91 R2H
Undercarriage (Track+Grouser) mm 3.9 M 600 TG Undercarriage (Track+Grouser) mm Fixed - 600 TG
L1 Overall Length mm 12,220 12,325 12,300 L1 Overall Length mm 12,280 12,345 12,325 11,730 11,520
Boom mm 3,575 3,775 3,830 Boom mm 3,575 3,775 3,830 3,975 4,140
H1 Overall Height Hose mm 3,680 3,865 3,920 H1 Overall Height Hose mm 3,680 3,865 3,920 4,020 4,185

Overall
Overall

Cabin mm 3,360 3,360 3,360 Cabin mm 3,210 3,210 3,210 3,210 3,210

Overall Width Extended mm 4,100 4,100 4,100 W1 Overall Width (SHIPPING) ** mm 3,510 3,510 3,510 3,510 3,510
W1
(SHIPPING)** Retracted mm 3,577 3,577 3,577 R1 Rear Swing Radius mm 3,800 3,800 3,800 3,800 3,800
R1 Rear Swing Radius mm 3,800 3,800 3,800 H2 Ground Clearance* mm *530 *530 *530 *530 *530
H2 Ground Clearance* mm *725 *725 *725 Frame only mm 2,990 2,990 2,990 2,990 2,990

G.L Frame only mm 2,990 2,990 2,990 W2 House G.L

Width w/Catwalk mm 3,296 3,296 3,296 3,296 3,296

Swing Body
W2 House Width w/Catwalk mm 3,296 3,296 3,296 w/Protector mm 3,352 3,352 3,352 3,352 3,352
Swing Body

w/Protector mm 3,352 3,352 3,352 W3 Cabin Width mm 1,010 1,010 1,010 1,010 1,010
W3 Cabin Width mm 1,010 1,010 1,010 H3 Height Over Cover mm 2,356 2,356 2,356 2,356 2,356
H3 Height Over Cover mm 2,507 2,507 2,507 H4 Counterweight Clearance* mm *1,273 *1,273 *1,273 *1,273 *1,273
H4 Counterweight Clearance* mm *1,424 *1,424 *1,424 H5 Track Height* mm *1,070 *1,070 *1,070 *1,070 *1,070
H5 Track Height* mm *1,195 *1,195 *1,195 L3 Track Length mm *5,480 *5,480 *5,480 *5,480 *5,480
Undercarriage
L3 Track Length mm *5,480 *5,480 *5,480 L4 Tumbler Distance mm 4,475 4,475 4,475 4,475 4,475
Undercarriage

8 Undercarriage Width 8
L4 Tumbler Distance J mm 4,470 4,470 4,470 W5 STD mm
J 3,408 3,408 3,408 3,408 3,408
**
Undercarriage Extended mm 4,100 4,100 4,100
W5 W6 Shoe Width mm 600 600 600 600 600
Width*** Retracted mm 3,540 3,540 3,540
Grouser Height mm 36 36 36 36 36
W6 Shoe Width mm 600 600 600
CAB - Cabin Height (H1 - H3) mm 853 853 853 853 853
Grouser Height mm 36 36 36 * : without grouser
CAB - Cabin Height (H1' - H3) mm 853 853 853 ** : STD (include side steps. If it excludes side steps, STD is 3,481)
*** : STD (include side steps. If it excludes side steps, STD is 3,350)
* : without grouser
** : EXTENDED / RETRACTED (include side steps. If it excludes side steps, 3,900 / 3,477)
*** : EXTENDED / RETRACTED (include side steps. If it excludes side steps, 3,900 / 3,340)

25 26
 L4 L4
W6 L3 W6 L3
W5 W5

WORKING RANGES

G.L G.L

8 8
J J

VARIABLE TRACK FIXED TRACK

BOOM LENGTH mm 7,100 (HD) 6,300 9,000 11,000 BOOM LENGTH mm 7,100 (HD) 6,300

ARM TYPE mm 3,350 (HD) 2,900 3,980 2,400 2,900 6,000 8,000 ARM TYPE mm 3,350 (HD) 2,900 3,980 2,400 2,900
3 3
BUCKET TYPE (SAE / PCSA) m 2.35 R2H 2.60 R2H 2.07 R2H 3.28 R2H 2.91 R2H 1.27 0.92 BUCKET TYPE (SAE / PCSA) m 2.35 R2H 2.60 R2H 2.07 R2H 3.28 R2H 2.91 R2H

A MAX. DIGGING REACH mm 12,125 11,720 12,670 10,305 10,735 16,060 19,615 A MAX. DIGGING REACH mm 12,125 11,720 12,670 10,305 10,735

B MAX. DIGGING REACH (GROUND) mm 11,865 11,455 12,425 10,000 10,445 15,870 19,455 B MAX. DIGGING REACH (GROUND) mm 11,895 11,485 12,455 10,030 10,475

C MAX. DIGGING DEPTH mm 7,790 7,340 8,405 6,260 6,755 11,795 15,125 C MAX. DIGGING DEPTH mm 7,940 7,490 8,555 6,410 6,905

D MAX. DUMPING HEIGHT mm 7,865 7,725 8,025 6,650 6,750 9,800 11,890 D MAX. DUMPING HEIGHT mm 7,715 7,575 7,875 6,500 6,600

E MIN. DUMPING HEIGHT mm 3,310 3,580 2,510 3,505 2,980 2,076 1,465 E MIN. DUMPING HEIGHT mm 2,980 3,430 2,360 3,355 2,830

F MAX. DIGGING HEIGHT mm 11,050 10,920 11,205 9,495 9,630 12,755 14,435 F MAX. DIGGING HEIGHT mm 10,900 10,770 11,055 9,345 9,480

G MAX. BUCKET PIN HEIGHT mm 9,690 9,550 9,850 8,455 8,555 11,415 13,355 G MAX. BUCKET PIN HEIGHT mm 9,540 9,400 9,700 8,305 8,405

H MAX. VERTICAL WALL DEPTH mm 4,370 4,045 4,930 590 1,155 10,300 12,805 H MAX. VERTICAL WALL DEPTH mm 4,520 4,195 5,080 740 1,305

I MAX. RADIUS VERTICAL mm 9,970 9,710 10,235 9,845 10,095 9,515 12,165 I MAX. RADIUS VERTICAL mm 9,970 9,710 10,235 9,845 10,095

J MAX. DIGGING DEPTH(8'LEVEL) mm 7,635 7,165 8,265 6,020 6,535 11,670 15,010 J MAX. DIGGING DEPTH(8'LEVEL) mm 7,785 7,315 8,415 6,170 6,685

K MIN. RADIUS 8' LINE mm 3,895 3,885 3,905 3,195 3,175 4,885 6,165 K MIN. RADIUS 8' LINE mm 3,895 3,885 3,905 3,195 3,175

L MIN. DIGGING REACH mm 840 2,010 50 2,015 1,160 -109 40 L MIN. DIGGING REACH mm 1,055 2,195 200 2,165 1,310

M MIN. SWING RADIUS mm 5,210 5,235 5,185 4,740 4,715 6,525 7,825 M MIN. SWING RADIUS mm 5,210 5,235 5,185 4,740 4,715

d. BUCKET ANGLE (DEG) ° 189.1 181.2 180.9 184.5 186.2 175.2 177.6 d. BUCKET ANGLE (DEG) ° 189.1 181.2 180.9 184.5 186.2

27 28
TECHNICAL SPECIFICATION
ENGINE HYDRAULIC SYSTEM DRIVE REFILL CAPACITIES
TM
Model The heart of the system is the EPOS (Electronic Power Optimizing Each track is driven by an independent axial piston motor through Fuel tank
System). It allows the efficiency of the system to be optimized for a planetary reduction gearbox. Two levers with control pedals
SCANIA DC13 626 L (165.4 US gal)
all working conditions and minimizes fuel consumption. guarantee smooth travel with counter rotation on demand.
4-cycle, water-cooled Waste gate conrolled turbocharger,
Cooling system (Radiator capacity)
Unit injector . The emission levels are well below the values • The hydraulic system enables independent or combined operations. Travel speed (fast/slow)
required for phase III. • Two travel speeds offer either increased torque or high speed 53.3 L (14.1 US gal)
5.5 / 3.1 km/h (4.0 / 2.2 mph)
tracking.
Number of cylinders Engine oil
• Cross-sensing pump system for fuel savings. Maximum traction force
6 • Auto deceleration system. 45 L (11.9 US gal)
37.0 / 21.0 ton.f (363 / 206 kN)
• Two operating modes, two power modes.
Nominal flywheel power Swing drive
• Button control of flow in auxiliary equipment circuits. Maximum grade
GROSS POWER • Computer-aided pump power control. 2 X 5 L (2 X 1.32 US gal)
294 kW (399.7PS, 394.2HP) @ 1,800 rpm (SAE J1995) 70 (35%)
NET POWER Main pumps Final drive
289 kW (392.9PS, 387.6HP) @ 1,800 rpm (SAE J1349) (each =Travel Device = travel motor + travel reduction gear)
2 variable displacement axial piston pumps
Max torque Max flow: 2 x 390 l/min BUCKET DIGGING FORCE 2 X 9 L (2 X 2.38 US gal)
1930 Nm @ 1,400 rpm Pilot pump Capacity Hydraulic tank
Bucket Bucket Width (mm) DIGGING FORCE
(m3)
Piston displacement Gear pump - max flow: 24 l/min Type (NOM/PRESS UP, TON) 390 L (103 US gal)
CECE SAE W/Cutter W/O Cutter
12,700 cc (775 cu.in) Maximum system pressure 1.89 2.14 1,682 1,588
[SAE] 25.8 / 27.4
GP 2.1 2.39 1,837 1,744
Bore & stroke Front
2.5 2.86 2,130 2,037
[ISO] 29.0 / 30.8 WEIGHT
Φ 130 mm x 160 mm (5.1” x 6.3”) Normal mode : 324 kgf/cm2
[SAE] 25.7 / 27.3
Power mode : 343 kgf/cm2 GP(Rock) 1.48 1.71 - 1,572 Shoe Width Ground Pressure kgf/cm2 Machine Weight
Starter [ISO] 30.7 / 32.6 (mm) (psi) (ton)
Travel : 324 kgf/cm2
1.87 2.07 1,416 1,382 STD. 600TG 0.89 (12.7) 51.0
24 V / 6.0 kW Swing : 300 kgf/cm2
2.11 2.35 1,566 1,532 OPT. 750TG 0.72 (10.2) 52.0
Batteries 2.32 2.60 1,666 1,700 OPT. 800TG 0.68 (9.7) 52.2
2 X 12 V / 200 Ah SWING MECHANISM R2H
2.43 2.72 1,766 1,732 OPT. 900TG 0.61 (8.7) 52.8
• An axial piston motor with two-stage planetary reduction gear 2.59 2.91 1,866 1,832 OPT. 600DG 0.89 (12.7) 51.0
Air cleaner 2.90 3.28 2,066 2,032
is used for the swing. *with wide variable track
Double element with auto dust evacuation. • Increased swing torque reduces swing time. 3.18 3.60 2,096 2,062
• Internal induction-hardened gear. 3.35 3.80 2,196 2,162
HYDRAULIC CYLINDERS • Internal gear and pinion immersed in lubricant bath. R2H+ 2.90 3.28 2,066 2,032 [SAE] 25.3 / 26.8 Shoe Width
(mm)
Ground Pressure kgf/cm2
(psi)
Machine Weight
(ton)
• The swing brake for parking is activated by spring and released 1.76 1.94 - 1,350 [ISO] 28.2 / 29.9
The piston rods and cylinder bodies are made of high-strength STD. 600TG 0.84 (11.9) 48.4
hydraulically. 2.00 2.22 - 1,500
steel. A shock absorbing mechanism is fitted in all cylinders to OPT. 750TG 0.69 (9.8) 49.4
R2S 2.32 2.59 - 1,700
ensure shockfree operation and extend piston life. Swing speed : 0 to 9 rpm OPT. 800TG 0.65 (9.2) 49.6
2.48 2.78 - 1,800
Cylinders Quantity Bore x Rod diameter x stroke OPT. 900TG 0.58 (8.2) 50.2
2.79 3.15 - 2,000 OPT. 600DG 0.84 (11.9) 48.4
Boom 2 170 x 115 x 1,650 mm 1.76 1.94 - 1,370
Arm 1 190 x 130 x 1,980 mm UNDERCARRIAGE 2.00 2.22 - 1,520
*with fixed track
Bucket 1 170 x 115 x 1,341 mm R2X
Chassis are of very robust construction, all welded structures are 2.32 2.59 - 1,720
designed to limit stresses. High-quality material used for 2.48 2.78 - 1,820
ENVIRONMENT durability. Lateral chassis welded and rigidly attached to the
undercarriage. Track rollers lubricated for life, idlers and
Noise levels comply with environmental regulations
sprockets fitted with floating seals.
(dynamic values). ARM DIGGING FORCE
Sound level guarantee Number of rollers and track shoes per side
BOOM LENGTH WEIGHT DIGGING FORCE
107 DB (A) (2000/14/EC) Upper rollers : 2 (SINGLE) & 1 (SHAFT), Variable Track (mm)
ARM
(mm) (kg) (NOM/PRESS UP, TON)
2 (SHAFT), Fixed Track
Cab sound level STD 3,350 1,684 [SAE] 21.0 / 22.2, [ISO] 21.3 / 22.6
Lower rollers: 9
74 DB (A) (ISO 6396) Standard HEAVY
Shoes : 53 Heavy 3,350 1,775 [SAE] 21.0 / 22.2, [ISO] 21.3 / 22.6
DUTY
Total length of track : 5,480 mm (17’ 9”) Duty
Short SHORT 2,900 1,655 [SAE] 23.8 / 25.3, [ISO] 24.3 / 25.7
LONG 3,980 1,831 [SAE] 18.9 / 20.0, [ISO] 19.0 / 20.2
SHORT 2,400 1,462 [SAE] 27.6 / 29.2, [ISO] 28.2 / 29.9
6,300
SHORT 2,900 1,655 [SAE] 23.8 / 25.3, [ISO] 24.3 / 25.7

29 30
TECHNICAL SPECIFICATION
BUCKET & ARM COMBINATIONS
Track Wide Variable Track (3.9 m) C/W (kg) 8,500 Track Fixed Track C/W (kg) 8,500
Track Gauge 2,740 / 3,300 (mm) [Retrackted/Extended] Shoe (mm) 600 Track Gauge 2,750 (mm) Shoe (mm) 600
Capacity (m3) Bucket Width (mm) 7.1m Boom 6.3m Boom Capacity (m3) Bucket Width (mm) 7.1m Boom 6.3m Boom
Bucket Type Weight (kg) Bucket Type Weight (kg)
SAE/PCSA CECE W/O Cutter With Cutter 2.9m Arm 3.35m Arm 3.98m Arm 2.4 m Arm 2.9 m Arm SAE/PCSA CECE W/O Cutter With Cutter 2.9m Arm 3.35m Arm 3.98m Arm 2.4 m Arm 2.9 m Arm
2.14 1.89 1,588 1,682 1,910 A A A A A 2.14 1.89 1,588 1,682 1,910 A A A A A
GP 2.39 2.10 1,744 1,837 2,027 A A A A A GP 2.39 2.10 1,744 1,837 2,027 A A B A A
2.86 2.51 2,037 2,130 2,279 B B C A A 2.86 2.51 2,037 2,130 2,279 B C C A A
2.07 1.87 1,382 1,416 1,952 A A A A A 2.07 1.87 1,382 1,416 1,952 A A A A A
2.35 2.11 1,532 1,566 2,121 A A A A A 2.35 2.11 1,532 1,566 2,121 A A B A A
2.60 2.32 1,666 1,700 2,260 A B B A A 2.60 2.32 1,666 1,700 2,260 A B C A A
2.72 2.43 1,732 1,766 2,283 A B C A A 2.72 2.43 1,732 1,766 2,283 B B C A A
R2H R2H
2.91 2.59 1,832 1,866 2,411 B B C A A 2.91 2.59 1,832 1,866 2,411 B C D A A
3.28 2.90 2,032 2,066 2,572 C C D A A 3.28 2.90 2,032 2,066 2,572 C D D A B
3.60 3.18 2,062 2,096 2,710 C D D A B 3.60 3.18 2,062 2,096 2,710 D D - B B
3.80 3.35 2,162 2,196 2,826 D D - B B 3.80 3.35 2,162 2,196 2,826 D - - B C
R2H+ 3.28 2.90 2,032 2,066 2,684 C C D A A R2H+ 3.28 2.90 2,032 2,066 2,684 C D D A B
1.94 1.76 1,350 - 2,268 A A A A A 1.94 1.76 1,350 - 2,268 A A A A A
2.22 2.00 1,500 - 2,408 A A A A A 2.22 2.00 1,500 - 2,408 A A B A A
R2S 2.59 2.32 1,700 - 2,594 A B C A A R2S 2.59 2.32 1,700 - 2,594 B C C A A
2.78 2.48 1,800 - 2,736 B C C A A 2.78 2.48 1,800 - 2,736 B C D A A
3.15 2.79 2,000 - 2,922 C C D A A 3.15 2.79 2,000 - 2,922 C D D A B
1.94 1.76 1,370 - 2,485 A A A A A 1.94 1.76 1,370 - 2,485 B C C A A
2.22 2.00 1,520 - 2,649 A A B A A 2.22 2.00 1,520 - 2,649 C D D A A
R2X R2X
2.59 2.32 1,720 - 2,930 B B C A A 2.59 2.32 1,720 - 2,930 D - - B B
2.78 2.48 1,820 - 3,040 B C D A A 2.78 2.48 1,820 - 3,040 - - - B C
ROCK 1.71 1.48 1,572 - 2,075 A A A A A ROCK 1.71 1.48 1,572 - 2,075 A A A A A

Track Fixed Track C/W (kg) 9,200

Track Wide Variable Track (3.9 m) C/W (kg) 9,200
Track Gauge 2,750 (mm) Shoe (mm) 600
Track 2,740 / 3,300 (mm) Shoe
900 600 Capacity (m3) Bucket Width (mm) 7.1m Boom 6.3m Boom
Gauge [Retrackted/Extended] (mm) Bucket Type Weight (kg)
SAE/PCSA CECE W/O Cutter With Cutter 2.9m Arm 3.35m Arm 3.98m Arm 2.4 m Arm 2.9 m Arm
Capacity (m3) Bucket Width (mm) 7.1m Boom 6.3m BOOM 7.1m Boom 6.3m Boom
Bucket Weight 2.14 1.89 1,588 1,682 1,910 A A A A A
Type SAE/ W/O With (kg) 2.9m 3.35m 3.98m 2.4 m 2.9 m 2.9m 3.35m 3.98m 2.4 m 2.9 m
CECE GP 2.39 2.10 1,744 1,837 2,027 A A B A A
PCSA Cutter Cutter Arm Arm Arm Arm Arm Arm Arm Arm Arm Arm
2.86 2.51 2,037 2,130 2,279 B B C A A
2.14 1.89 1,588 1,682 1,910 A A A A A A A A A A
2.07 1.87 1,382 1,416 1,952 A A A A A
GP 2.39 2.10 1,744 1,837 2,027 A A A A A A A A A A
2.35 2.11 1,532 1,566 2,121 A A B A A
2.86 2.51 2,037 2,130 2,279 A A B A A A B B A A
2.60 2.32 1,666 1,700 2,260 A B B A A
2.07 1.87 1,382 1,416 1,952 A A A A A A A A A A
2.72 2.43 1,732 1,766 2,283 A B C A A
2.35 2.11 1,532 1,566 2,121 A A A A A A A A A A R2H
2.91 2.59 1,832 1,866 2,411 B C C A A
2.60 2.32 1,666 1,700 2,260 A A A A A A A B A A
3.28 2.90 2,032 2,066 2,572 C C D A A
2.72 2.43 1,732 1,766 2,283 A A B A A A A B A A
R2H 3.60 3.18 2,062 2,096 2,710 D D D A B
2.91 2.59 1,832 1,866 2,411 A B B A A A B C A A
3.80 3.35 2,162 2,196 2,826 D D - B B
3.28 2.90 2,032 2,066 2,572 B C C A A B C D A A
R2H+ 3.28 2.90 2,032 2,066 2,684 C D D A A
3.60 3.18 2,062 2,096 2,710 C C D A A C D D A B
1.94 1.76 1,350 - 2,268 A A A A A
3.80 3.35 2,162 2,196 2,826 C D D A B C D D A B
2.22 2.00 1,500 - 2,408 A A B A A
R2H+ 3.28 2.90 2,032 2,066 2,684 B C C A A C C D A A
R2S 2.59 2.32 1,700 - 2,594 A B C A A
1.94 1.76 1,350 - 2,268 A A A A A A A A A A
2.78 2.48 1,800 - 2,736 B C C A A
2.22 2.00 1,500 - 2,408 A A A A A A A A A A
3.15 2.79 2,000 - 2,922 C D D A A
R2S 2.59 2.32 1,700 - 2,594 A A B A A A B B A A
1.94 1.76 1,370 - 2,485 A B C A A
2.78 2.48 1,800 - 2,736 A B B A A B B C A A
2.22 2.00 1,520 - 2,649 C C D A A
3.15 2.79 2,000 - 2,922 B C C A A C C D A A R2X
2.59 2.32 1,720 - 2,930 D D - A B
1.94 1.76 1,370 - 2,485 A A A A A A A A A A
2.78 2.48 1,820 - 3,040 D - - B C
2.22 2.00 1,520 - 2,649 A A A A A A A A A A
R2X ROCK 1.71 1.48 1,572 - 2,075 A A A A A
2.59 2.32 1,720 - 2,930 A A B A A A B C A A
2.78 2.48 1,820 - 3,040 A B C A A B B C A A Based on ISO 10567 and SAE J296, arm length without quick change clamp C : Suitable for materials with density of 1,500 kg/m3 (2,500 lb/yd3) or less
ROCK 1.71 1.48 1,572 - 2,075 A A A A A A A A A A A : Suitable for materials with density of 2,100kg/m3 (3,500 lb/yd3) or less D : Suitable for materials with density of 1,200 kg/m3 (2,000 lb/yd3) or less
B : Suitable for materials with density of 1,800kg/m3 (3,000 lb/yd3) or less X : Not recommended

31 32
STANDARD & OPTION
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
Boom & Arm Safety Some of optional equipments may be standard in some markets. Some of this optional equipment is not available in some markets.
You must check with the local Develon dealer to know about the availability or to release the adaptation following the needs of the
• 7.1 m Boom • Large handrails and step
applications
• 2.9 m Arm (HD) • Convex metal anti-slip plates
• Seat belt Boom & Arm Others
Hydraulic system
• Hydraulic safety lock lever
• Boom and arm flow regeneration • Safety glass • 6.3 m Boom • Piping option
• Boom and arm holding valves(MCV) • Hammer for emergency escape • 7.1 m Boom (HD) - Piping for Rotating (PERO)
• Swing anti-rebound valves • Right and left mirrors • 9.0 m Boom - Piping for Two way
• Spare ports (Control valve) • Handrail • 9.0 m Boom (For SLR) - Piping for Breaker
• One-touch power boost • 11.0 m Boom - Piping for Quick clamp
Others • 11.0 m Boom (For SLR) • Shoe (mm)
Cabin & Interior • 2.4 m Arm (HD) 600 DG / 750 TG / 800 TG / 900 TG
• Double element air cleaner
• All weather sound suppressed type cab • Additional water separator • 3.35 m Arm • Lower wiper
• Air conditioner & Heater • Dry type pre cleaner • 3.35 m Arm (HD) • Fuel filler pump
• Adjustable suspension seat with head rest and adjustable arm • Fuel filter • 3.98 m Arm • Additional work lamp (HAL or LED)
rest • Dust screen for radiator/oil cooler • 6.0 m Arm - 4-front / 2-rear on cabin
• Pull-up type front window and removable lower front • Engine overheat prevention system • 6.0 m Arm (For SLR) - 2-front on cabin
window • Engine restart prevention system • 8.0 m Arm • Hydraulic Oil
• Room light • Self-diagnostic system • 8.0 m Arm (For SLR) - Cold weather (VG32)
• Intermittent windshield wiper • Electric horn - Tropical weather (VG68)
Safety
• Cup holder • Halogen working lights (frame mounted 1, boom mounted 2) • Breaker filter
• Hot & Cool box • Hydraulic track adjuster • Boom and arm hose rupture protection valve • Water separator
• LCD color monitor panel (8" touch screen) • Normal track guard • Overload warning device - Water separator with heater
• E/G RPM control dial • Greased and sealed track link • ROPS Cabin - Water separator for BIO diesel
• AM/FM radio + MP3 (USB) • Hydraulic oil tank air breather filter • FOGS (ISO 10262, FOGS standard) • Heavy duty under cover
• Remote radio ON/OFF switch • 3.9m Retracted Track • Alarm (Travel, Swing, QC) • Long & Fixed track
• 24V power socket • Counterweight (8.5 Ton) • Rotating beacon • Straight Travel
• Serial communication port for laptop PC interface • Single Catwalk • LED lights • Electric Transfer Pump
• Joystick lever with 3 buttons • 600 TG Shoe • Camera • Counterweight (9.2 Ton)
• Fabric seat - Rear View Camera • Auto greasing unit
• Plastic roof cover - Side & Rear View Camera • Air compressor
- Around View Monitor • Track guard (Full)
• Seat belt warning • Microphone
• Side protector • Oil washed pre-cleaner
• Cabin front guard (Upper and lower guard) • Additional 12 V socket
• Develon Fleet Management
Cabin & Interior
• Air suspension seat
• Rain Shield
• High seat Mount
• Breaker pedal
• Steel roof cover
• Additional mirror
• DAB Audio
• Rear sun visor
• Artificial leather seat cover
• Heating & cooling seat

33 34