1 2 3 4 5 6 7 8

REVISIONS

REV# ECN# REVISION ACTION REV.BY: APPR.BY: DATE

CUSTOMER DRAWING A -- INITIAL RELEASE JX JL 03/09/2020
THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE

B -- 增加表格信息 Star James 10/29/2020

Add Package specification P/N And Add Dust Cap
C -- Star JL 03/04/2021
AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL MANUFACTURING VARIATIONS.

A Protection Cap A
C

41.00
订购信息 Ordering Information
PL18 X - 30 1 - 70 - 2 -5
Key and Color HVIL Cable Size Cable Type:

38.00
"X",Orange “0”, NO HVIL "50"=50mm² "-5",Huber+Suhner
"Y",Black “1”,With HVIL "70"=70mm²
"U",Yellow
"V",Green
"W",Red
B "T",Blue B

30.80 72.70
规格参数(Spec.):
1.工作温度 Operating temperature:-40°C～+125°C.
2.带高压互锁 Electrical interlock (HVIL).
3.额定电流 Current rating:
Power: 50mm^2,200A;70mm^2,250A;HVIL: 5A.

.4
R34
4.额定电压 Operating voltage:
Power: 1000 VDC; Signal: 60 VDC.
5.耐 电 压 Dielectric withstanding voltage:
A.与插座对插后,Pin与铁壳之间
When mated, between pin and metal shell: 5000 VDC.
B.与插座对插后,Pin与HVIL之间
Terminal

29.40
When mated, between pin and HVIL: 5000 VDC.
C.与插座对插后,HVIL与铁壳之间
C C
When mated, between HVIL and metal shell: 500 VDC.
D.与插座对插前,两个HVIL端子之间耐压
Before mating, between two HVIL terminals: 500 VDC.
6.防护等级 Protection class:Mated-IP6k9k & IP67,unmated-IP2X.
7.电磁屏蔽 360°full Shielding.
8.机械寿命 Mating cycle:100 Min.
Dim A
Dim B

9.带CPA的摇杆系统 Latch system with CPA.

10.绝缘材料满足UL94 V-0 Inner insulation material satisfy UL94V-0.
11.镀灰锌/锌镍合金,符合RoHS,满足500H中性盐雾实验
Gray Zinc/Nickel(ZnNi)Plating.RoHS compliant,Rated at 500hours salt spray.

AMPHENOL Amphenol Technical Products International Asia.

第三角投影 页 面 幅面 版次 比例 PART NAME:
THIRD ANGLE
PROJECTION SHEET SIZE REV. SCALE
D PL300 G2 1POS Straight Plug D
Standard Part List: B 1 OF 2 A4 C
签 名 SIGNATURE 日期 DATE UNLESS OTHERWISE SPECIFIED DWG NO:
Dia. Primary Dia. of Screen Overall-Dia. Outside-Dia. of Inside-Dia. of 1) All dimensions are in metric(mm).
Model No. H+S Part No. 制 图 DRAWN Star 03/04/2021 PL18X-30X-XX-2-5
Insulation(mm) max. (mm) Nominal(mm) terminal(mm):"A" terminal(mm):"B" 2) Tolerances are as follows:
审 核 CHECKED 1.PL DEC ± 1.00 CUST PART # CUST REV.
PL18(X)-30X-70-2-5 84100298 13.7 0.3 14.6 17.0 0.3 16.7 0.3 12.2 0.3 2.PL DEC ± 0.50
PL18(X)-30X-50-2-5 84096257 11.5 0.3 12.6 14.9 0.3 14.0 0.3 10.0 0.3 批 准 APPROVAL 3.PL DEC ± 0.20 Angles ±1°

1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8
型号 Model Kit Package P/N Bulk Package P/N REVISIONS
PL18X-300-50-2-5 AC-HA010794 AC-HA010794-2
REV# ECN# REVISION ACTION REV.BY: APPR.BY: DATE
PL18Y-300-50-2-5 AC-HA010795 AC-HA010795-2
PL18U-300-50-2-5 AC-HA010796 AC-HA010796-2 A -- INITIAL RELEASE JX JL 03/09/2020
THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE

PL18V-300-50-2-5 AC-HA010797 AC-HA010797-2 B -- 增加表格信息 Star James 10/29/2020

PL18W-300-50-2-5 AC-HA010798 AC-HA010798-2 Add Package specification P/N And Add Dust Cap
C -- Star JL 03/04/2021
AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL MANUFACTURING VARIATIONS.

A Protection Cap A
PL18T-300-50-2-5 AC-HA010799 AC-HA010799-2
PL18X-300-70-2-5 AC-HA010800 AC-HA010800-2
PL18Y-300-70-2-5 AC-HA010801 AC-HA010801-2
PL18U-300-70-2-5 AC-HA010802 AC-HA010802-2
PL18V-300-70-2-5 AC-HA010803 AC-HA010803-2
PL18W-300-70-2-5 AC-HA010804 AC-HA010804-2
PL18T-300-70-2-5 AC-HA010805 AC-HA010805-2 C

PL18X-301-50-2-5 AC-HA010818 AC-HA010818-2 1

2
PL18Y-301-50-2-5 AC-HA010819 AC-HA010819-2
PL18U-301-50-2-5 AC-HA010820 AC-HA010820-2
PL18V-301-50-2-5 AC-HA010821 AC-HA010821-2
PL18W-301-50-2-5 AC-HA010822 AC-HA010822-2
6
B PL18T-301-50-2-5 AC-HA010823 AC-HA010823-2 8
7 B
PL18X-301-70-2-5 AC-HA010824 AC-HA010824-2
PL18Y-301-70-2-5 AC-HA010825 AC-HA010825-2
PL18U-301-70-2-5 AC-HA010826 AC-HA010826-2 HVIL Protection Cap
PL18V-301-70-2-5 AC-HA010827 AC-HA010827-2 C
PL18W-301-70-2-5 AC-HA010828 AC-HA010828-2
PL18T-301-70-2-5 AC-HA010829 AC-HA010829-2 5 9
4 13 PL300 G2 1 POS plug protection cap 1 Order P/N AC-CP001615
10
11 12 PL300 G2 Dust Cap for Plug 1
Different P/N are used according to different
11 PL300 G2 Lock Housing1 2 Cable sizes
3
10 PL300 G2 Lock Housing2 1
Dust Cap Different P/N are used according to different
9 PL300 G2 Metal Gasket 1 Cable sizes
C Different P/N are used according to different
12 8 PL300 G2 Tail Cap for straight plug 1 Cable sizes
C C
Different P/N are used according to different
7 PL300 G2 cable sealing for straight plug 1 Cable sizes
Different P/N are used according to different
6 PL300 G2 Inner Copper Ring 1 Cable sizes
13 Note: Optional to be ordered separately
5 PL300 G2 Outer Copper Ring for Straight Plug 1
Different P/N are used according to different
C 4 PL300 G2 Coil Spring for Straight Plug 1 Cable sizes
3 PL300 G2 Terminal Assy 1
2 PL300 G2 Insulation Sleeve Assy 1
Different P/N are used according to different
1 PL300 G2 Shell Plug Assy 1 Cable sizes
ITEM DESCRIPTION QTY REMARK
MATERIALS LIST

AMPHENOL Amphenol Technical Products International Asia.

第三角投影 页 面 幅面 版次 比例 PART NAME:
THIRD ANGLE
PROJECTION SHEET SIZE REV. SCALE
D PL300 G2 1POS Straight Plug D
2 OF 2 A4 C
签 名 SIGNATURE 日期 DATE UNLESS OTHERWISE SPECIFIED DWG NO:
1) All dimensions are in metric(mm).
制 图 DRAWN Star 03/04/2021 2) Tolerances are as follows:
PL18X-30X-XX-2-5

审 核 CHECKED 1.PL DEC ± 1.00 CUST PART # CUST REV.

2.PL DEC ± 0.50
批 准 APPROVAL 3.PL DEC ± 0.20 Angles ±1°

1 2 3 4 5 6 7 8