Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

Safety Data Sheet according to

Regulation (EC) 'No. 2015/830

SECTION 1: Identification of the Substance/Mixture and the Company/Undertaking

1.1 Product Identifier IIN-FLOWPRIME-EP Revision Date: 22/10/2020

Product Name: FLOWPRIME BASE A Supersedes Date: New SDS

1.2 Relevant identified uses of the Component of multicomponent industrial coatings - Industrial use.
substance or mixture and uses
advised against

1.3 Details of the supplier of the safety data sheet

Importer: None

Manufacturer: StonCor Middle East L.L.C.

Regulatory / Technical Information:

Rivero, Melody - [email protected]

Datasheet Produced by:

1.4 Emergency telephone number: CHEMTREC +1 703 5273887 (Outside US)

SECTION 2: Hazard Identification

2.1 Classification of the substance or mixture

Classification according to Classification, Labeling & Packaging Regulation (EC) 1272/2008

HAZARD STATEMENTS

Skin Irritation, category 2 H315

Skin Sensitizer, category 1 H317
Eye Irritation, category 2 H319

Page 1 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

Acute Toxicity, Inhalation, category 4 H332

Hazardous to the aquatic environment, Chronic, category 2 H411
2.2 Label elements

Symbol(s) of Product

Signal Word
Warning

Named Chemicals on Label

Benzyl alcohol, Xylene, Reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <=
700)
HAZARD STATEMENTS

Skin Irritation, category 2 H315 Causes skin irritation.

Skin Sensitizer, category 1 H317 May cause an allergic skin reaction.
Eye Irritation, category 2 H319 Causes serious eye irritation.
Acute Toxicity, Inhalation, category 4 H332 Harmful if inhaled.
Hazardous to the aquatic environment, H411 Toxic to aquatic life with long lasting effects.
Chronic, category 2
PRECAUTION PHRASES
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/
face protection.
P302+352 IF ON SKIN: Wash with plenty of soap and water.
P304+340 IF INHALED: Remove victim to fresh air and keep at rest in a
position comfortable for breathing.
P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do so.
Continue rinsing.
P333+313 If skin irritation or rash occurs: Get medical advice/attention.
P391 Collect spillage.
2.3 Other hazards
No Information

Results of PBT and vPvB assessment:

The product does not meet the criteria for PBT/VPvB in accordance with Annex XIII.

SECTION 3: Composition/Information On Ingredients

3.2 Mixtures
Hazardous Ingredients
CAS-No. EINEC No. Name According to EEC %
Reaction product: bisphenol-A-
25068-38-6 500-033-5 (epichlorhydrin) epoxy resin (number average 75-100
molecular weight <= 700)
100-51-6 202-859-9 Benzyl alcohol 2.5 - <10
1330-20-7 215-535-7 Xylene 1.0 - <2.5
98-55-5 p-Menth-1-en-8-ol 0.1 - <1.0

Page 2 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

CAS-No. REACH Reg No. CLP Symbols CLP Hazard Statements M-Factors
01-2119456619-26-
25068-38-6 GHS07-GHS09 H315-317-319-411
0029
100-51-6 GHS07 H302-312-319-332
1330-20-7 GHS02-GHS07 H226-315-332
98-55-5 GHS07 H315-319

Additional Information: The text for CLP Hazard Statements shown above (if any) is given in Section 16.

SECTION 4: First-aid Measures

4.1 Description of First Aid Measures
GENERAL NOTES: When symptoms persist or in all cases of doubt seek medical advice.
AFTER INHALATION: Move to fresh air. Consult a physician after significant exposure.
AFTER SKIN CONTACT: Use a mild soap if available. Wash off immediately with soap and plenty of water while removing
all contaminated clothes and shoes. If skin irritation persists, call a physician.
AFTER EYE CONTACT: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove
contact lenses. If eye irritation persists, consult a specialist.
AFTER INGESTION: Gently wipe or rinse the inside of the mouth with water. Give small amounts of water to drink. Do NOT
induce vomiting. Never give anything by mouth to an unconscious person.
Self protection of the first aider:
No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid
to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

4.2 Most important symptoms and effects, both acute and delayed

No Information
4.3 Indication of any immediate medical attention and special treatment needed

No information available on clinical testing and medical monitoring. Specific toxicological information on substances, if
available, can be found in section 11.

SECTION 5: Fire-fighting Measures

5.1 Extinguishing Media:
Carbon Dioxide, Dry Chemical, Foam
FOR SAFETY REASONS NOT TO BE USED: Alcohol, Alcohol based solutions, any other media not listed above.

5.2 Special hazards arising from the substance or mixture

No Information

5.3 Advice for firefighters

In the event of fire, wear self-contained breathing apparatus. High volume water jet. Hazardous decomposition products
formed under fire conditions. Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Contains epoxy constituents. See information
supplied by the manufacturer.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation. Use personal protective equipment.
6.2 Environmental precautions
Do not allow material to contaminate ground water system. Prevent product from entering drains. May cause long-term
adverse effects in the aquatic environment.
6.3 Methods and material for containment and cleaning up

Prevent further leakage or spillage if safe to do so. Contain spillage, soak up with non-combustible absorbent material, (e.g.

Page 3 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations
(see section 13).
6.4 Reference to other sections

FURTHER INSTRUCTIONS: Please refer to EU disposal requirements or country specific disposal requirements for this
material. See Section 13 for further information.

SECTION 7: Handling and Storage

7.1 Precautions for safe handling

Use only in area provided with appropriate exhaust ventilation. Wear personal protective equipment.
Wash hands before breaks and at the end of workday. When using, do not eat, drink or smoke.
7.2 Conditions for safe storage, including any incompatibilities

CONDITIONS TO AVOID: No Information

STORAGE CONDITIONS: Store in original container. Keep locked up or in an area accessible only to qualified or authorised
persons. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
7.3 Specific end use(s)

No specific advice for end use available.

SECTION 8: Exposure Controls/Personal Protection

8.1 Control parameters

Ingredients with Occupational Exposure Limits

(EU)

Name CAS-No. LTEL ppm STEL ppm STEL mg/m3 LTEL mg/m3
Reaction product: bisphenol-A- 25068-38-6
(epichlorhydrin) epoxy resin (number
average molecular weight <= 700)
Benzyl alcohol 100-51-6
Xylene 1330-20-7 50 100 442 221
p-Menth-1-en-8-ol 98-55-5

Name CAS-No. OEL Note

Reaction product: bisphenol-A- 25068-38-6

(epichlorhydrin) epoxy resin (number
average molecular weight <= 700)

Benzyl alcohol 100-51-6

Xylene 1330-20-7 SK

p-Menth-1-en-8-ol 98-55-5

FURTHER ADVICE: Refer to the regulatory exposure limits for the workforce enforced in each country. Some components may
not have been classified under the EU CLP Regulation.

8.2 Exposure controls

Personal Protection
RESPIRATORY PROTECTION: Respirator with a vapor filter.
EYE PROTECTION: Safety glasses.
HAND PROTECTION: Impervious gloves. Long sleeved clothing. Remove and wash contaminated clothing before re-use.
OTHER PROTECTIVE EQUIPMENT: No Information
ENGINEERING CONTROLS: Avoid contact with skin, eyes and clothing. Ensure adequate ventilation, especially in confined
areas.

Page 4 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

Chemical Name:
EC No.: CAS-No.:

DNELs - Derived no effect level

Workers Consumers
Route of Acute effect Acute effects Chronic Chronic effects Acute effect Acute effects Chronic Chronic effects
Exposure local systemic effects local systemic local systemic effects local systemic
Oral Not required
Inhalation
Dermal
PNEC's - Predicted no effect concentration
Environmental protection target PNEC
Fresh water
Fresh water sediments
Marine water
Marine sediments
Food chain
Microorganisms in sewage treatment
soil (agricultural)
Air

SECTION 9: Physical and Chemical Properties

9.1 Information on basic physical and chemical properties
Appearance: Liquid
Physical State Liquid
Odor Slight
Odor threshold Not determined
pH Not determined
Melting point / freezing point (°C) Not determined
Boiling point/range (°C) 136 - N.D.
Flash Point, (°C) 65
Evaporation rate Not determined
Flammability (solid, gas) Not determined

Upper/lower flammability or explosive Not determined

limits
Vapour Pressure Not determined
Vapour density Not determined
Relative density Not determined
Solubility in / Miscibility with water Practically insoluble
Partition coefficient: n-octanol/water Not determined
Auto-ignition temperature (°C) Not determined
Decomposition temperature (°C) Not determined
Viscosity Unknown
Explosive properties Not determined
Oxidising properties

Page 5 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

Not determined

9.2 Other information

VOC Content g/l: 0.00

Specific Gravity (g/cm3) 1.149

SECTION 10: Stability and Reactivity

10.1 Reactivity
No reactivity hazards known under normal storage and use conditions.
10.2 Chemical stability
No decomposition if stored and applied as directed. Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous polymerisation does not occur.
10.4 Conditions to avoid
No Information
10.5 Incompatible materials
Strong oxidizing agents. Acids and bases. Amines.

10.6 Hazardous decomposition products

Thermal decomposition can lead to release of irritating gases and vapours. Alcohols. Exothermic reaction. Carbon dioxide
(CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.

SECTION 11: Toxicological Information

11.1 Information on toxicological effects
Acute Toxicity:
Oral LD50: No information available.
Inhalation LC50: No information available.

Irritation: No information available.

Corrosivity: No information available.

Sensitization: No information available.

Repeated dose toxicity: No information available.

Carcinogenicity: No information available.

Mutagenicity: No information available.

Toxicity for reproduction: No information available.

STOT-single exposure: No information available.

STOT-repeated exposure: No information available.

Aspiration hazard: No information available.

If no information is available above under Acute Toxicity then the acute effects of this product have not been tested.
Data on individual components are tabulated below:

Page 6 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

CAS-No. Name According to EEC Oral LD50 Dermal LD50 Vapor LC50 Gas LC50 Dust/Mist LC50

Reaction product: bisphenol-

A-(epichlorhydrin) epoxy resin >2000 mg/kg, rat,
25068-38-6 >2000 mg/kg, rat 0.000 0.000
(number average molecular oral
weight <= 700)
2000 mg/kg,
100-51-6 Benzyl alcohol 1230 mg/kg, rat
rabbit
1000 ppm, rat 0.000 0.000

3523 mg/kg, rat, 12126 mg/kg, 5000 ppm/4 hrs

1330-20-7 Xylene oral rabbitt
0.000 0.000
rat, inhalation

Additional Information:
No Information

SECTION 12: Ecological Information

12.1 Toxicity:

EC50 48hr (Daphnia): No information

IC50 72hr (Algae): No information
LC50 96hr (fish): No information

12.2 Persistence and degradability: No information

12.3 Bioaccumulative potential: No information

12.4 Mobility in soil: No information

12.5 Results of PBT and vPvB The product does not meet the criteria for PBT/VPvB in accordance with Annex XIII.
assessment:

12.6 Other adverse effects: No information

CAS-No. Name According to EEC EC50 48hr IC50 72hr LC50 96hr

Reaction product: bisphenol-A-

25068-38-6 (epichlorhydrin) epoxy resin (number average No information No information
molecular weight <= 700)
100-51-6 Benzyl alcohol 230 mg/l 700 mg/l 460 mg/l
1330-20-7 Xylene 3.82 mg/l No information 24-30 mg/l, minnow
98-55-5 p-Menth-1-en-8-ol No information No information No information

SECTION 13: Disposal Considerations

13.1 WASTE TREATMENT METHODS: If recycling is not practicable, dispose of in compliance with local regulations. Empty
containers should be taken to an approved waste handling site for recycling or disposal.
European Waste Code: 080111
Packaging Waste Code: 150110

Page 7 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

SECTION 14: Transport Information

14.1 UN number UN 3082
14.2 UN proper shipping name Environmentally Hazardous Substance, Liquid, N.O.S.
Technical name Not applicable
14.3 Transport hazard class(es) 9
Subsidiary shipping hazard Not applicable
14.4 Packing group III
14.5 Environmental hazards Unknown
14.6 Special precautions for user Unknown
EmS-No.: F-A , S-F

14.7 Transport in bulk according to Annex II Unknown

of MARPOL 73/78 and the IBC code

SECTION 15: Regulatory Information

15.1 Safety, health and environmental regulations/legislation for the substance or mixture:

National Regulations:

Denmark Product Registration Number: Not available

Danish MAL Code: Not available

Danish MAL Code - Mixture: Not available

Sweden Product Registration Number: Not available

Norway Product Registration Number: Not available

Germany WGK Class: Not available

Covered by Directive 2012/18/EC (Seveso III): Not applicable

Restrictions to product or to substances according

to Annex XVII, Regulation (CE) 1907/2006: Not applicable

Annex XIV - Authorisation List:

CAS-No. Name According to EEC

Not Applicable

SVHC - Substances of very high concern (Candidate List):

CAS-No. Name According to EEC

Not Applicable

15.2 Chemical Safety Assessment:

No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier.

SECTION 16: Other Information

Page 8 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP

Text for CLP Hazard Statements shown in Section 3 describing each ingredient:

H226 Flammable liquid and vapour.

H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H411 Toxic to aquatic life with long lasting effects.
Reasons for revision
No Information

List of References:

This Safety Data Sheet was compiled with data and information from the following sources:

The Ariel Regulatory Database provided by the 3E Corporation in Copenhagen, Denmark;

European Union Commission Regulation No. 1907/2006 on REACH as amended within Commission Regulation
(EU) 2015/830;
European Union (EC) Regulation No. 1272/2008 on the classification, labelling and packaging of
substances and mixtures (CLP Regulation) and subsequent technical progress adaptations (ATP);
EU Council Decision 2000/532/EC and its Annex entitled "List of Wastes".

Acronym & Abbreviation Key:

CLP Classification, Labeling & Packaging Regulation

EC European Commission
EU European Union
US United States
CAS Chemical Abstract Service
EINECS European Inventory of Existing Chemical Substances
REACH Registration, Evaluation, Authorization of Chemicals Regulation
GHS Globally Harmonized System of Classification and Labeling of Chemicals
LTEL Long term exposure limit
STEL Short term exposure limit
OEL Occupational exposure limit
ppm Parts per million
mg/m3 Milligrams per cubic meter
TLV Threshold Limit Value
ACGIH American Conference of Governmental Industrial Hygienists
OSHA Occupational Safety & Health Administration
PEL Permissible Exposure Limits
VOC Volatile organic compounds
g/l Grams per liter
mg/kg Milligrams per kilogram
N/A Not applicable
LD50 Lethal dose at 50%
LC50 Lethal concentration at 50%
EC50 Half maximal effective concentration
IC50 Half maximal inhibitory concentration
PBT Persistent bioaccumulative toxic chemical
vPvB Very persistent and very bioaccumulative
EEC European Economic Community
ADR International Transport of Dangerous Goods by Road
RID International Transport of Dangerous Goods by Rail
UN United Nations
IMDG International Maritime Dangerous Goods Code

Page 9 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-EP
IATA International Air Transport Association
MARPOL International Convention for the Prevention of Pollution From Ships, 1973 as
modified by the Protocol of 1978
IBC International Bulk Container
RTI Respiratory Tract Irritation
NE Narcotic Effects

For further information, please contact: Technical Services Department

The information on this sheet corresponds to our present knowledge. It is not a specification and
it does not guarantee specific properties. The information is intended to provide general
guidance as to health and safety based upon our knowledge of the handling, storage, and use of the
product. It is not applicable to unusual or non-standard uses of the product or where instructions
and recommendations are not followed.

Page 10 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

Safety Data Sheet according to

Regulation (EC) 'No. 2015/830

SECTION 1: Identification of the Substance/Mixture and the Company/Undertaking

1.1 Product Identifier IIN-FLOWPRIME-AC Revision Date: 22/10/2020

Product Name: FLOWPRIME HARDENER B Supersedes Date: New SDS

1.2 Relevant identified uses of the Component of multicomponent industrial coatings - Industrial use.
substance or mixture and uses
advised against

1.3 Details of the supplier of the safety data sheet

Importer: None

Manufacturer: StonCor Middle East L.L.C.

Regulatory / Technical Information:

Rivero, Melody - [email protected]

Datasheet Produced by:

1.4 Emergency telephone number: CHEMTREC +1 703 5273887 (Outside US)

SECTION 2: Hazard Identification

2.1 Classification of the substance or mixture

Classification according to Classification, Labeling & Packaging Regulation (EC) 1272/2008

HAZARD STATEMENTS

Skin Corrosion, category 1 H314-1

Reproductive Toxicity, category 2 H361
Hazardous to the aquatic environment, Acute, category 1 H400

Page 1 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

Hazardous to the aquatic environment, Chronic, category 1 H410

2.2 Label elements

Symbol(s) of Product

Signal Word
Danger

Named Chemicals on Label

4-nonylphenol, branched
HAZARD STATEMENTS

Skin Corrosion, category 1 H314-1 Causes severe skin burns and eye damage.
Reproductive Toxicity, category 2 H361 Suspected of damaging fertility or the unborn child.
Hazardous to the aquatic environment, H400 Very toxic to aquatic life.
Acute, category 1
Hazardous to the aquatic environment, H410 Very toxic to aquatic life with long lasting effects.
Chronic, category 1
PRECAUTION PHRASES
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/
face protection.
P284 Wear respiratory protection.
P301+330+331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P304+340 IF INHALED: Remove victim to fresh air and keep at rest in a
position comfortable for breathing.
P305+P351+P33 IF IN EYES: Rinse cautiously with water for several minutes.
8 Remove contact lenses, if present and easy to do so.
Continue rinsing.
P308+313 IF exposed or concerned: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P391 Collect spillage.
2.3 Other hazards
No Information

Results of PBT and vPvB assessment:

The product does not meet the criteria for PBT/VPvB in accordance with Annex XIII.

SECTION 3: Composition/Information On Ingredients

3.2 Mixtures
Hazardous Ingredients
CAS-No. EINEC No. Name According to EEC %
9046-10-0 618-561-0 polyoxypropylenediamine 25 - <50
84852-15-3 284-325-5 4-nonylphenol, branched 25 - <50
90-72-2 202-013-9 2,4,6-tris(dimethylaminomethyl)phenol 2.5 - <10

CAS-No. REACH Reg No. CLP Symbols CLP Hazard Statements M-Factors
9046-10-0 GHS05-GHS09 H314-411

Page 2 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC
84852-15-3 GHS05-GHS07-GHS08-GHS09 H302-314-361-400-410
90-72-2 GHS07 H315-319

Additional Information: The text for CLP Hazard Statements shown above (if any) is given in Section 16.

SECTION 4: First-aid Measures

4.1 Description of First Aid Measures
GENERAL NOTES: When symptoms persist or in all cases of doubt seek medical advice.
AFTER INHALATION: Move to fresh air. Consult a physician after significant exposure.
AFTER SKIN CONTACT: Use a mild soap if available. Wash off immediately with soap and plenty of water while removing
all contaminated clothes and shoes.
AFTER EYE CONTACT: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove
contact lenses.
AFTER INGESTION: Gently wipe or rinse the inside of the mouth with water. Do NOT induce vomiting. Never give anything
by mouth to an unconscious person.
Self protection of the first aider:
No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid
to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves.

4.2 Most important symptoms and effects, both acute and delayed

No Information
4.3 Indication of any immediate medical attention and special treatment needed

No information available on clinical testing and medical monitoring. Specific toxicological information on substances, if
available, can be found in section 11.

SECTION 5: Fire-fighting Measures

5.1 Extinguishing Media:
Carbon Dioxide, Dry Chemical, Foam
FOR SAFETY REASONS NOT TO BE USED: Alcohol, Alcohol based solutions, any other media not listed above.

5.2 Special hazards arising from the substance or mixture

No Information

5.3 Advice for firefighters

In the event of fire, wear self-contained breathing apparatus. High volume water jet. Hazardous decomposition products
formed under fire conditions. Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation. Use personal protective equipment.
6.2 Environmental precautions

Do not allow material to contaminate ground water system. Prevent product from entering drains.
6.3 Methods and material for containment and cleaning up
Prevent further leakage or spillage if safe to do so. Contain spillage, soak up with non-combustible absorbent material, (e.g.
sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations
(see section 13).
6.4 Reference to other sections

FURTHER INSTRUCTIONS: Please refer to EU disposal requirements or country specific disposal requirements for this
material. See Section 13 for further information.

Page 3 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

SECTION 7: Handling and Storage

7.1 Precautions for safe handling

Use only in area provided with appropriate exhaust ventilation. Wear personal protective equipment. Do not breathe vapours
or spray mist.
Wash hands before breaks and at the end of workday. When using, do not eat, drink or smoke.
7.2 Conditions for safe storage, including any incompatibilities

CONDITIONS TO AVOID: Direct sources of heat.

STORAGE CONDITIONS: Store in original container. Keep locked up or in an area accessible only to qualified or authorised
persons. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
7.3 Specific end use(s)

No specific advice for end use available.

SECTION 8: Exposure Controls/Personal Protection

8.1 Control parameters
Ingredients with Occupational Exposure Limits
(EU)

Name CAS-No. LTEL ppm STEL ppm STEL mg/m3 LTEL mg/m3
polyoxypropylenediamine 9046-10-0
4-nonylphenol, branched 84852-15-3
2,4,6-tris(dimethylaminomethyl)phenol 90-72-2

Name CAS-No. OEL Note

polyoxypropylenediamine 9046-10-0

4-nonylphenol, branched 84852-15-3

2,4,6-tris(dimethylaminomethyl)phenol 90-72-2

FURTHER ADVICE: Refer to the regulatory exposure limits for the workforce enforced in each country. Some components may
not have been classified under the EU CLP Regulation.

8.2 Exposure controls

Personal Protection
RESPIRATORY PROTECTION: Respirator with filter for organic vapor.
EYE PROTECTION: Tightly fitting safety goggles.
HAND PROTECTION: Impervious gloves. Long sleeved clothing. Remove and wash contaminated clothing before re-use.
OTHER PROTECTIVE EQUIPMENT: No Information
ENGINEERING CONTROLS: Avoid contact with skin, eyes and clothing. Ensure adequate ventilation, especially in confined
areas.

Page 4 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

Chemical Name:
EC No.: CAS-No.:

DNELs - Derived no effect level

Workers Consumers
Route of Acute effect Acute effects Chronic Chronic effects Acute effect Acute effects Chronic Chronic effects
Exposure local systemic effects local systemic local systemic effects local systemic
Oral Not required
Inhalation
Dermal
PNEC's - Predicted no effect concentration
Environmental protection target PNEC
Fresh water
Fresh water sediments
Marine water
Marine sediments
Food chain
Microorganisms in sewage treatment
soil (agricultural)
Air

SECTION 9: Physical and Chemical Properties

9.1 Information on basic physical and chemical properties
Appearance: Pale Yellow Liquid
Physical State Liquid
Odor Ammoniacal
Odor threshold Not determined
pH Alkaline
Melting point / freezing point (°C) Not determined
Boiling point/range (°C) N.D. - N.D.
Flash Point, (°C) 100
Evaporation rate Not determined
Flammability (solid, gas) Not determined

Upper/lower flammability or explosive Not determined

limits
Vapour Pressure Not determined
Vapour density Not determined
Relative density Not determined
Solubility in / Miscibility with water Partly Soluble
Partition coefficient: n-octanol/water Not determined
Auto-ignition temperature (°C) Not determined
Decomposition temperature (°C) Not determined
Viscosity Unknown
Explosive properties Not determined
Oxidising properties

Page 5 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

Not determined

9.2 Other information

VOC Content g/l: 0.00

Specific Gravity (g/cm3) 0.955

SECTION 10: Stability and Reactivity

10.1 Reactivity
No reactivity hazards known under normal storage and use conditions.
10.2 Chemical stability
Stable under normal conditions.
10.3 Possibility of hazardous reactions
Hazardous polymerisation may occur.
10.4 Conditions to avoid
Direct sources of heat.
10.5 Incompatible materials
Strong oxidizing agents.

10.6 Hazardous decomposition products

Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.

SECTION 11: Toxicological Information

11.1 Information on toxicological effects
Acute Toxicity:
Oral LD50: No information available.
Inhalation LC50: No information available.

Irritation: No information available.

Corrosivity: No information available.

Sensitization: No information available.

Repeated dose toxicity: No information available.

Carcinogenicity: No information available.

Mutagenicity: No information available.

Toxicity for reproduction: No information available.

STOT-single exposure: No information available.

STOT-repeated exposure: No information available.

Aspiration hazard: No information available.

If no information is available above under Acute Toxicity then the acute effects of this product have not been tested.
Data on individual components are tabulated below:

Page 6 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

CAS-No. Name According to EEC Oral LD50 Dermal LD50 Vapor LC50 Gas LC50 Dust/Mist LC50

2980 mg/kg,
9046-10-0 polyoxypropylenediamine 2855 mg/kg, rat
rabbit
0.000 0.000

84852-15-3 4-nonylphenol, branched 1620 mg/kg oral 0.000 0.000

2,4,6-tris
90-72-2 2169 mg/kg oral 0.000 0.000
(dimethylaminomethyl)phenol
Additional Information:
No Information

SECTION 12: Ecological Information

12.1 Toxicity:

EC50 48hr (Daphnia): No information

IC50 72hr (Algae): No information
LC50 96hr (fish): No information

12.2 Persistence and degradability: No information

12.3 Bioaccumulative potential: No information

12.4 Mobility in soil: No information

12.5 Results of PBT and vPvB The product does not meet the criteria for PBT/VPvB in accordance with Annex XIII.
assessment:

12.6 Other adverse effects: No information

CAS-No. Name According to EEC EC50 48hr IC50 72hr LC50 96hr

9046-10-0 polyoxypropylenediamine No information No information

84852-15-3 4-nonylphenol, branched No information No information
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol No information No information

SECTION 13: Disposal Considerations

13.1 WASTE TREATMENT METHODS: If recycling is not practicable, dispose of in compliance with local regulations. Empty
containers should be taken to an approved waste handling site for recycling or disposal.
European Waste Code: 080111
Packaging Waste Code: 150110

Page 7 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

SECTION 14: Transport Information

14.1 UN number UN 2735
14.2 UN proper shipping name Amines, Liquid, Corrosive, N.O.S
Technical name Not applicable
14.3 Transport hazard class(es) 8
Subsidiary shipping hazard Not applicable
14.4 Packing group II
14.5 Environmental hazards Unknown
14.6 Special precautions for user Unknown
EmS-No.: Not applicable

14.7 Transport in bulk according to Annex II Unknown

of MARPOL 73/78 and the IBC code

SECTION 15: Regulatory Information

15.1 Safety, health and environmental regulations/legislation for the substance or mixture:

National Regulations:

Denmark Product Registration Number: Not available

Danish MAL Code: Not available

Danish MAL Code - Mixture: Not available

Sweden Product Registration Number: Not available

Norway Product Registration Number: Not available

Germany WGK Class: Not available

Covered by Directive 2012/18/EC (Seveso III): Not applicable

Restrictions to product or to substances according

to Annex XVII, Regulation (CE) 1907/2006: Not applicable

Annex XIV - Authorisation List:

CAS-No. Name According to EEC

Not Applicable

SVHC - Substances of very high concern (Candidate List):

CAS-No. Name According to EEC

Not Applicable

15.2 Chemical Safety Assessment:

No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier.

SECTION 16: Other Information

Page 8 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC

Text for CLP Hazard Statements shown in Section 3 describing each ingredient:

H302 Harmful if swallowed.

H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H361 Suspected of damaging fertility or the unborn child.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
Reasons for revision
No Information

List of References:

This Safety Data Sheet was compiled with data and information from the following sources:

The Ariel Regulatory Database provided by the 3E Corporation in Copenhagen, Denmark;

European Union Commission Regulation No. 1907/2006 on REACH as amended within Commission Regulation
(EU) 2015/830;
European Union (EC) Regulation No. 1272/2008 on the classification, labelling and packaging of
substances and mixtures (CLP Regulation) and subsequent technical progress adaptations (ATP);
EU Council Decision 2000/532/EC and its Annex entitled "List of Wastes".

Acronym & Abbreviation Key:

CLP Classification, Labeling & Packaging Regulation

EC European Commission
EU European Union
US United States
CAS Chemical Abstract Service
EINECS European Inventory of Existing Chemical Substances
REACH Registration, Evaluation, Authorization of Chemicals Regulation
GHS Globally Harmonized System of Classification and Labeling of Chemicals
LTEL Long term exposure limit
STEL Short term exposure limit
OEL Occupational exposure limit
ppm Parts per million
mg/m3 Milligrams per cubic meter
TLV Threshold Limit Value
ACGIH American Conference of Governmental Industrial Hygienists
OSHA Occupational Safety & Health Administration
PEL Permissible Exposure Limits
VOC Volatile organic compounds
g/l Grams per liter
mg/kg Milligrams per kilogram
N/A Not applicable
LD50 Lethal dose at 50%
LC50 Lethal concentration at 50%
EC50 Half maximal effective concentration
IC50 Half maximal inhibitory concentration
PBT Persistent bioaccumulative toxic chemical
vPvB Very persistent and very bioaccumulative
EEC European Economic Community
ADR International Transport of Dangerous Goods by Road
RID International Transport of Dangerous Goods by Rail
UN United Nations
IMDG International Maritime Dangerous Goods Code

Page 9 / 10
Date Printed: 22/10/2020 Product: IIN-FLOWPRIME-AC
IATA International Air Transport Association
MARPOL International Convention for the Prevention of Pollution From Ships, 1973 as
modified by the Protocol of 1978
IBC International Bulk Container
RTI Respiratory Tract Irritation
NE Narcotic Effects

For further information, please contact: Technical Services Department

The information on this sheet corresponds to our present knowledge. It is not a specification and
it does not guarantee specific properties. The information is intended to provide general
guidance as to health and safety based upon our knowledge of the handling, storage, and use of the
product. It is not applicable to unusual or non-standard uses of the product or where instructions
and recommendations are not followed.

Page 10 / 10