Arteche UCE-17 Indoor PT
Arteche UCE-17 Indoor PT
The core is built with high permeability grain oriented silicon steel
laminations for low losses. The windings are copper wire with copper
plate double isolation. The concentric distribution of the coils prevents
magnetic flux leakage, achieving greater accuracy and higher capacity to
INDOOR withstand mechanical stresses in adverse operating conditions.
60 Hertz
Partial Discharge measurements exceed the IEEE, CAN/CSA and IEC
requirements.
Mechanical characteristics
Insulation Material Colors Weight (lbs.)
Resin Gray* 85
Unfused
9.01” (228.8)
7.48” (189.9)
Nameplate
9.25’’ (234.95)
9.83” (249.7)
Secondary
terminals
10.25” (260.35)
Fused 9” (228.6)
15.62” (396.75)
Nameplate
8’’ (203.2)
12.36” (314)
Secondary
terminals
10.25” (260.35)
ONE
SECONDARY
MARKING
(Single H1 H2
Primary
Ratio)
Approximate dimensions in inches (mm).
X1 X2 * Brown color available upon request.
Electrical characteristics
Power-Frequency
Continuous Rated Withstand Voltage
Nominal
Secon- Rated Voltage Thermal (1 min)
Primary IEEE Metering Voltage BIL
Code Ratio dary Voltage Factor Burden
(V) Accuracy System (kV) Primary & Secondary
(V) Factor 30 s (VA)
(kV) Secondary Winding
(Un) (Un)
(kVrms) (kVrms)
All Units can be supplied either switchgear style, fuse clips only or fuses and clips. Please contact your commercial representant for further information.
Additional ratings available upon request.
Notes: