Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MUMBAI UNIVERSITY STUDENT ASSOCIATION (MUSA)

(GET TUTORIALS)
QUESTION BANK OF POC
SE IT SEM III FOR SUMMER SESSION – MAY 2024
______________________________________________________

1.Explain need of modulation. Justify it with example.


2.Compare AM and FM.
3.Explain in short pre-emphasis and De-emphasis.

A
4.What is PSK signal. Draw the PSK signal for the following binary signal
111010011.
5.Explain the principle of reflection and refraction.
6.Define signal to noise ratio. Explain the effect of cascade connection on

S
a signal to noise ratio.
7.Derive Friss formula for two stage cascade amplifier.
8.Derive the expression for total power in AM.
9.The AM Transmitter develops an unmodulated power o/p of 400 Watts

U
across a 50 resistive load. The carrier is modulated by a sinusoidal signal
with a modulation index of 0.8. Assuming fm= 5KHz and fc= 1MHz.
(i) Obtain the value of carrier amplitude Vc and hence write the expression
for AM signal.

M
(ii) Find the total sideband power.
(iii) Draw the AM wave for the given modulation index.
10.Explain quantization process in PCM with suitable diagram.
11.What are the limitations of TRF receiver? Explain how these
limitations are avoided using super-heterodyne receiver.
12.Compare ground wave, sky wave, space wave and tropospheric
scatter propagation.
13.Explain FDM transmitter & receiver with block diagram
14.Draw the block diagram of PAM generator and detector. Explain the
working giving waveforms at the output of each block.
15.Explain slope overload error and hunting error in Delta modulation.
16.Derive the condition to avoid slope overload distortion.
17.Explain the generation of SSB with phase shift method.
18.Compare PAM,PWM and PPM generation and degeneration.
19.Draw and explain electromagnetic spectrum and explain its
applications.
𝜴
20.Explain in detail generation of DSB by using balanced modulator.
21.Explain characteristics of super heterodyne receiver.
22. Explain sampling theorem for low pass and band pass signals.
23. Explain pre-emphasis and de-emphasis in FM.
24. Explain Time Division Multiplexing and Frequency Division
Multiplexing along with its applications.
25.Explain in detail pulse code modulation generation and degeneration.
26.Draw and explain FM demodulator in detail :Foster seely discriminator
27.Derive mathematical expression for AM.
28. Explain DSBFC for amplitude modulation.
29.Compare ASK,FSK,PSK and Digital band pass modulation technique.

A
30.Discuss time and frequency shifting, unit step, delta and gate function
of Fourier transform.

S
De ne the following terms

U
i)Noise gure
ii). Noise temperature
iii). Noise bandwidth
iv) Noise voltage
v) Delta Modulation.

M
vi)Baseband signal
vii)Image frequency
fi
fi

You might also like