Professional Documents
Culture Documents
M8260-1 Installation Instructions en
M8260-1 Installation Instructions en
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
Correct usage
domestic use only: defrosting, heating and cooking of food. It is not designed for industrial or laboratory use. vapors in this appliance.
operated after it has been correctly installed into cabinetry. This is necessary to ensure that all electrical components are shielded. externally visible damage. Do not operate a damaged appliance. or operated outdoors.
Technical safety
work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Mieles Technical Service Department for examination, repair or adjustment.
~ Before installing the oven, check for ~ This appliance must not be installed ~ Do not use this product near water
for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations.
~ Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to prevent injury and machine damage. If in doubt, consult a qualified technician. ~ To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. This appliance must be grounded. Connect only to properly grounded outlet. See "Electrical connection - GROUNDING INSTRUCTIONS". It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.
replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. the power supply must be disconnected.
Safety
room. Due to the high temperatures radiated, objects left near the oven could catch fire. water.
~ Do not submerge the cord or plug in ~ Keep the power cord away from
heated surfaces.
~ Do not cover or block any openings ~ Times for cooking, heating and
defrosting food in the microwave are shorter than that of traditional food preparation methods. Extensive microwaving could dry out food and cause possible ignition. Fire hazard! herbs, gel, etc. with the microwave function. The cushions could ignite, even once removed from the oven after heating. This is a fire hazard. dishes or dry herbs.
~ Do not use full power to warm empty ~ Do not heat an empty microwave. ~ Do not use the appliance for
dehydrating food, or leave it unattended when cooking with oils and fats. Fire hazard. microwave oven, it can easily ignite.
containing salt should be immediately cleaned from the stainless steel interior. Corrosion may occur. fueling any flame, do not open the oven door. Switch the appliance off by pressing the Stop/C button, switch off at the mains and remove the plug from the socket. Do not open the oven door until the smoke has dispersed.
Do not leave the appliance ~ Spills or stains from food and liquids ~ unattended when heating food in disposable, e.g. plastic, paper or other flammable materials.
Do not use the oven to heat food in ~ If smoke occurs in the oven, to avoid ~ retaining packaging, e.g. take-out heat food bags. This packaging contains a thin layer of aluminum foil which reflects the microwaves. This reflected energy can cause the paper layer to ignite.
this appliance. The steam could penetrate live components and permanently damage the oven or cause injury.
~ When cleaning surfaces of the door and oven that come together when the door is closed, use only mild, non-abrasive soaps, or detergents applied with a sponge or soft cloth.
empty. This will cause damage.
sufficient standing time. Always check the temperature of the food itself after taking it out of the microwave. Do not judge by the plate temperature. The heat is created in the food, the dishes may stay cool to the touch. before serving heated baby food.
liquids in sealed containers or bottles. Remove the nipple or lid before heating in the microwave. Built-up pressure may cause them to burst. Danger of injuries.
7
~ Some products such as whole eggs and sealed containers - for example, closed glass jars - are able to explode and should not be heated in this oven. ~ Eggs can be cooked without their shells in the microwave oven only if the yolk membrane has been punctured first. The pressure could otherwise cause the egg yolk to explode. Danger of injuries.
disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous. Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to prevent machine damage. Consult an electrician if in doubt. Only operate the appliance after it has been installed into cabinetry. The appliance must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
41
Installation
Building-in dimensions
When building in the appliance, ensure that the vents located at the front of the appliance are not blocked, and that there is adequate ventilation to the rear of the unit (see illustrations). Do not cover or block any openings on the appliance. This microwave is suitable for installation into a tall cabinet. A minimum installation height of 33 7/16" (850 mm) must be maintained. During transport be sure to lift the appliance by the housing, not by the frame. The framework is not sturdy enough to support the weight of the appliance while being carried. Tall cabinet
59
>850
20
42
452,5
Installation
Installation accessories (supplied)
4 x 16mm
Only operate the appliance after it has been installed into cabinetry.
Position the fitting bracket on the center line. Use the mark on the bracket as a guide.
Miele appliances can be installed flush or proud. Discuss your installation requirements with you architect, designer and installer.
43
Installation
^ Fit a screw a in to the center of the first long hole. ^ Check the alignment of the unit, then fit another screw a into the other long hole. ^ Tighten both screws. ^ Place the appliance in the niche. Using both hands on the back of the microwave interior move it into place. The microwave will engage into position once it is correctly installed. ^ Check the alignment. ^ If it is not aligned correctly, pull the appliance out of the niche and realign it by slightly adjusting the bracket on the long holes. ^ Once correctly aligned, to prevent the unit from moving insert a third screw a into the middle of the bracket. ^ Slide the unit into the niche, pulling the plug and cable through the back. ^ Connect the electrical supply. ^ Push the appliance all the way in to the niche as described above.
44
For the most updated manual see the Miele web site.