BX2M/MX51: Metallurgical Microscopes
BX2M/MX51: Metallurgical Microscopes
BX2M/MX51
MX51
BX51
EXCELLENT OPTICS
New standard of the UIS2 optics, wavefront aberration control guarantees the world's highest level imaging, even further.
A new standard of the objective lens performance, using wavefront aberration control.
The Olympus UIS2 objective lenses set a new standard, with wavefront aberration control in addition to common performance standards of N.A. and W.D. Olympus challenges farther highest order optics which has not been fulfilled by the conventional standards. We offer excellent performance objective lenses by minimizing the aberrations that lower resolution.
An example of 3D display of a wave front measured with a laser interferometer. The flatter the surface of the lens, the better the aberration correction becomes. UIS2 image
Analyzer Flare
Objective lens
Specimen
LCPLFLN-LCD objective lenses, accurately correct the spherical aberration which could become issue when viewing through glass substrates, are provided. The 20x and 50x objective lenses are useful when looking through glass thicknesses of 0 to 1.2 mm and the 100x objective lens is corrected for glass thicknesses up to 0.7 mm seamlessly.
V value A comparison of the color temperature of UIS2 objective lenses and conventional UIS objective lenses. The color temperature of the UIS2 objective lenses is within a range which is very close to the color temperature target, which represents ideal white value.
SYSTEM VERSATILITY
Wide choice of handy accessories to meet the full range of microscopy inspection needs.
Stage selection and adapter plates.
Various special stages and adapter plates are provided: a 100 x 100 mm stage plate (U-MSSP4), a wafer holder plate (U-WHP2) for 3- and 4-inch wafers and extra-large stages (U-SIC4R2 and U-SIC4L2), allowing the use of a glass plate (U-MSSPG) for transmitted U-SIC4R2 light observations.
U-MSSPG
BX
R AFE W
U-LH100HGAPO
U-MSSP4
U-WHP2+ BH2-WHR43
MX The MX51 accommodates a 6 inch wafer holder and a glass plate in combination with 150 mm stage, MX-SIC6R2 and also offers more versatile holders r w e and plates with 100 mm stage, U-SIC4R2.
t q u i o y
U-LH100HG U-LH75XEAPO
A DAT GE RA STO
U-P6RE
65mm
MX The combination of a transmitted illumination unit with the 150mm stage, MX-SIC6R2 enables transmitted light brightfield observation of samples up to 2mm thick, with an illumination range of 100 x 100mm. The slim-profiled illumination unit is designed for minimal effect on the stage operation and is useful for observations of samples such as MEMS (Micro Electronics Mechanical Systems) sensors and other optical/optronic components.
LCD
MX The standard maximum sample thickness is 30mm. Insert the intermediate attachment to accommodate thicker samples.
LG-PS2*
U-LGAD
ERGONOMIC DESIGN
MX-SWETTR
U-DICR
U-DICRHC
Integrated ND filter for more comfortable switching between brightfield/darkfield observation methods.
The brightfield/darkfield reflected light illuminator features an integrated ND filter that protects the operator's eye by preventing sudden, drastic changes in brightness. This integrated function can be disengaged manually.
U-ECA
MICROSCOPE LINEUP
A full product line-up for every purpose even for special applica tions.
BF DF
DIC FL
PO IR
Transmitted light
Motorized
LED
ESD
BX61
BF
DF
DIC
FL
PO
Transmitted light
Motorized
BX51/BX51M
BF
DF
DIC
FL
PO
Transmitted light
Quick changeover between reflected light illumination and transmitted light illumination.
Accommodates specimens up to 65mm in thickness as a standard. Specimens thicker than 65 mm can also be observed by inserting an arm adapter between the microscope and the illuminator.
BX51+BX-URA2 BX61+BX-RFAA
BX51M+BX-RLA2
Brightfield observation
Darkfield observation
DIC observation
Fluorescent observation
10
BX41M-LED
BF
DIC
PO
LED
ESD
BXFM-S/BXFM
BF
DF
DIC
FL
PO
System combination
LED illumination keeps natural color reproduction and a constant brightness during light adjustment or over lamp life span. LED illumination provides improvement in throughput and reduction in running costs as optical adjustment is unnecessary and work does not have to be interrupted due to lamp burn-out. LED illumination consumes less energy, 1/7 of that consumed by a 30W halogen lamp. Low power consumption also contributes to reduced CO2.
ESD performance: surface resistance of 10 8 ohm or less, discharge time of 0.2 sec or less*
*When charged to 1000V and then discharged to 100V
Discharge time
1500V Discharge start point 1000V
!0
500V
u !1
0V 0 1 2 3sec
y BXFM+BX-RLA2 i o
Equipped with 2 types of reflected light illuminators, BX-AKMALED (has an aperture stop and oblique illumination function) and BX-KMA-LED; oblique illumination with the BX-AKMALED provides high-contrast images in a simple process.
BX-KMA-LED BX-AKMA-LED BXFM-S
r t q Large stand (SZ-STL) w Stand (U-ST) e BXFM frame (BXFM-F) r Illuminator holder for BXFM (BXFM-ILH) t Illuminator holder for BXFM-S (BXFM-ILHS) y Assist spring for BXFM (BXFM-ILHSPU) u Reflected light illuminator for BF (U-KMAS) i Fiber adapter for reflected light observation (U-LGAD) o Single port tube with lens (U-TLU) !0 External light source (TH4-100/200) !1 Hand switch (TH4-HS)
BX-REMCB
Oblique illumination IN Oblique illumination OUT
Motorized
Simple control box gives the multiple motorized functions to the BX51/BXFM
Control options include: the motorized revolving nosepiece. the motorized BF/DF Mode select and AS Open/Close via BX-RLAA or BX-RFAA Those controls are made via the hand switch (U-HSTR2) or directly from the computer via RS232C format.
e q
Olympus Eco-Products
We, Olympus, certify products conforming to our own enviromentally-counscious standards as "Olympus Eco-products".
w q BX-REMCB control box for motorized nosepiece and BF/DF illuminator w BX-RLAA Motorized BF/DF reflected light illuminator e U-D5BDREMC Motorized DIC quintuple BD revolving nosepiece
11
12
BX51-IR
Near infrared (IR) light imaging
BF
IR
Transmitted light
Objective lenses
MPLAPON
0.95 0.95 0.04 0.08 0.15 0.30 0.45 0.80 0.90 0.15 0.30 0.45 0.80 0.90 0.90 0.15 0.25 0.40 0.75 0.90 0.13 0.25 0.40 0.50 0.80 0.13 0.25 0.40 0.50 0.80 0.10 0.25 0.40 0.75 0.90 0.10 0.25 0.40 0.75 0.90 0.25 0.35 0.6 0.45 0.70 0.85
MPLAPON series
This is a Plan Apochromat objective lens series for brightfield observation with chromatic aberration corrected at high level. Olympus has assured that this series has the optical performance (wavefront aberration) with a Strehl ratio*1 of 95% or more*2 first in the world as a universal objective lens. This series is also compatible with a differential interference contrast or simple polarized observation.
MPLFLN-BDP series
The Plan Semi-Apochromat POL design ensures through compensation for coma aberration. Distortion is also minimized, which makes these objective lenses the best choice for Nomarski DIC microscopy.
MPLFLN
The BX51-IR allows non-destructive inspection and analysis of regions not visible to the naked eye. It facilitates non-destructive observation of specimens such as internals of silicon wafers and on the back of packages and CSP bumps.
Lineup of 5x to 100x IR objective lenses which compensate for aberrations from visible to near infrared light. Provides reflected and transmitted near infrared light observation model and reflected near infrared light observation model.
* Please contact your local Olympus dealer for IR camera system, large-size stage combination and system combination. q 100W halogen lamp housing for IR (U-LH100IR) w Trinocular tube for IR (U-TR30IR) e Single port tube lens with lens for IR (U-TLUIR) r Transmitted polarizer for IR (U-POTIR) t Rotatable analyzer slider for IR (U-AN360IR) y Reflected polarizer slider for IR (U-POIR) u Band path filter (1100nm) for IR (U-BP1100IR) i Band path filter (1200nm) for IR (U-BP1200IR) o Objective lenses for IR ( LMPlan5xIR, LMPlan10xIR, LMPlan20xIR, LMPlan50xIR, LMPlan100xIR and MPlan100xIR) !0 Connector to couple analyzer and polarizer (U-POIR accessory)
MPLFLN-BD*
q w
MPLFLN-BDP*
r y
t !0
LMPLFLN-BD*4
MPLN*
MX51
BF
DF
DIC
FL
PO
SLMPLN
LCPLFLN-LCD
SLMPLN series
Long working distance allows observation of fine line widths in high contrast observation with no chromatic shift.
LCPLFLN-LCD series
The perfect objective lenses for sample observation through an LCD panel or other glass plate. Aberration correction matched to the glass thickness is possible by using a correction collar. * Strehl ratio: When the light condensing ratio (central intensity) on the image field of an ideal aplanatic optical system is assumed as 100%, a light condensing ratio in % that an actual optical system can condense is known as Strehl ratio. The greater is this numeric value, the better becomes the quality of an optical system.
1
LMPlan-IR
MPlan-IR*3
* "BD" = "Brightfield/darkfield" objective lenses *1 Slight vignetting may occur in the periphery of the field when MPLN-BD series objective lenses are used with high-intensity light sources such as mercury and xenon for darkfield observation. *2 Resolutions calculated with aperture iris diaphragm wide open. *3 Limited up to F.N. 22. No compliance with F.N. 26.5. *4 BD objective lenses cannot be combined with BX41M-LED. *5 Analyzer and polarizer are recommended to the usage with MPLFLN1.25x or 2.5x. *6 : Applicable to the view of specimens with/without a cover glass 0 : Applicable to the view of specimens without a cover glass
*2 Strehl Ratio is guaranteed by the following conditions. Measurement : Transmitted Wavefront Interferometer (OLYMPUS in-house equipment) Temperature : 23 1 centigrade Measurement Area : 97% in pupil diameter
14
Greater efficiency up from observation to image capture and data analysis. Microscope digital cameras
DP72
With super-high, 12.8 megapixel resolution, the DP72 offers top-ofthe-line image clarity, detail and color depth. Advanced on-board cooling ensures the high sensitivity needed to capture clear images of any kind of sample, even dark ones.
Key features:
12.8 megapixels Peltier cooling for highsensitivity performance with low noise Superb color reproduction and high resolution provide top-ofthe-line image quality 15 fps frame rate for fast, easy focusing and framing
Measurement
Counting particles...measuring dimensions...calculating the distance between two lines...analySIS software handles tasks like these with ease. Results can also be saved/output together with the images.
Stitching Images
DP25
This outstanding, high-resolution 5 megapixel color CCD camera includes accurate color reproduction and advanced color control among a wealth of features. It's also versatile enough for work with all types of samples. Olympus analySIS software is separately required to capture images.
Key features:
5 megapixels Images in true color and accurate detail Trimming the live image in a high resolution at high frame rates
Multiple adjacent images can be seamlessly and naturally stitched together into one an easy, effective way of observing areas too large to be viewed as one image through the microscope.
DP20
The DP20 provides fast (15fps) motion imaging for precise color reproduction quality and highly efficient image acquisition in production line inspections. Even very fine structures are accurately captured and displayed with outstanding clarity.
Key features:
2 megapixels Standalone type (no PC required) saves space Fast (15fps) frame rate for quick, easy focusing and framing Equipped with measurement functions (distance between 2 lines, area of circle and between 2 circle centers distance) as standard
Particle Analysis
The separator function enables automatic separation of particles within an image, while threshold levels and detection areas are set though the ROI (region of interest). All particles are measured automatically, using a range of measurement parameters. The measurement data is statistically processed to enable high-level particulate analysis.
3D Image
A uniformly focused image, obtained using the extended focal point function, can be used to construct 3D images and create real 3D animation. Magnification, reduction, pan, and rotation can be performed freely, allowing the specimen to be seen as a whole and examined from any angle.
15
16
U-DP *2 Dual port U-TVZ Zoom video port U-TV0.5x C mount video port with 0.5x lens
Stand
U-MDOB3 Multi observation body U-SWETTR-2 Super widefield erect image trinocular tube
U-TAD Plate adapter U-P4RE Centerable (quadruple) revolving nosepiece COMPENSATORS U-ANT Analyzer for transmitted light Objective lenses for polarizing observation
U-REMPS-2 Power supply unit for motorized revolving nosepiece U-25ND6 U-25ND25 U-25ND50 ND filters U-25IF550 U-25Y48 Filters U-AN Analyzer for reflected light U-AN360-3 Rotatable analyzer
U-PO3 Polarizer slider for reflected light U-POTP3 *3 Polarizer U-PO accessory
U-HS Hand switch U-D5BDREM Motorized BD revolving nosepiece with Normarski DIC slot
U-D6REM Motorized BF revolving nosepiece with Normarski DIC slot U-D6RE/U-D6RE-ESD-2 Sextuple revolving nosepeice with slider slot for DIC U-D6BDRE Sextuple revolving nosepeice for BF/DF with slider slot for DIC U-D7RE Septuple revolving nosepeice with slider slot for DIC U-P6RE Centerable (sextuple) revolving nosepiece U-P5BDRE Centerable (quintuple) revolving nosepiece for BF/DF U-5RE-2 Quintuple revolving nosepiece BX41RF-LED/ BX41 frame
BX-URA2 Universal reflected light illuminator U-LH100-3 U-LH100L-3 100W halogen lamphousing U-RCV *4 DF converter U-KMAS Reflected light illuminator for BF U-LGAD Fiber adapter for reflected light observation LG-SF *5 Light guide LG-PS2 *5 Light source TH4-HS Hand switch TH4-100/200 External light source
WI-ARMAD Arm adapter U-FMP Mechanical stage BX51RF BX51 reflected frame BX51TRF BX51 reflected/transmitted frame
BF objective lenses
U-DICR DIC slider for reflected light BX-REMCB Control box U-DICRH *3 DIC slider for reflected light (high resolution type) U-D6REMC Motorized Normarski DIC sextuple revolving nosepiece U-HSTR2 Hand switch U-HRD-4, U-HRDT-4 Specimen holders U-HLD-4, U-HLDT-4 Specimen holders U-POT Transmitted polarizer
U-WHP2 Plate
U-D5BDREMC Motorized Normarski DIC quintuple BD revolving nosepiece U-D6BDREMC Motorized Normarski DIC sextuple BD revolving nosepiece U-P5BDREMC Motorized centerable (quintuple) BD revolving nosepiece
U-ST Stand
BF objective lenses
*1 Slight vignetting may occur in the periphery of the field of view in combination with an additional intermediate attachment or observation method. *2 Slight vignetting may occur in the periphery of the field of view in combination with fluorescence illuminator. *3 U-POTP3 polarizer should be used in combination with U-DICRH. *4 Exclusively for high intensity burner. *5 Different types may be offered in each area.
17
18
U-AN Analyzer for reflected light U-AN360-3 Rotatable analyzer Intermediate tube system U-PO accessory
BURNER ON
U-AN360RAF
Mirror units
U-POTP3 Polarizer
U-25ND6 U-25ND25 U-25ND50 ND filters U-25LBD U-25IF550 U-25L42 U-25FR Filters U-HRD-4, U-HRDT-4 Specimen holders
U-DICR DIC slider for reflected light U-DICRH *3 DIC slider for reflected light (high resolution type)
U-LH100-3 U-FWR U-LH100L-3 Motorized reflected 100W halogen lamp housings filter wheel
U-D6REMC Motorized BF revolving nosepiece with Normarski DIC slot BF objective lenses U-D5BDREMC/ U-D6BDREMC/ U-P5BDREMC Motorized BD revolving nosepiece with Normarski DIC slot
U-TLU Single port tube with lens U-TLUIR Single port tube with lens for IR
See manual
U-ZPCB *2 Z board
U-HSTR2 Hand switch PC BX2BSW Control software BX61 BX61 reflected/transmitted frame
U-DICRHC DIC slider for reflected light (high contrast type) BH2-WHR43 Wafer holder plate U-MSSP Stage plate U-FMP Mechanical stage U-SVR/LM Mechanical right/left hand control stages U-WHP2 Plate
3 5
3 5
3 5
2 1
BX-RLA2 Reflected light illuminator for BF/DF
1
BX-URA2 Universal reflected light illuminator U-RCV DF converter
U-LH100-3 100W halogen lamp housing U-FWT Motorized transmitted filter wheel U-SIC4R2/L2 Right/left hand control large-size stages U-LWCD Long working distance condenser
2
U-MBF3 U-MDF3 U-MBFL3 U-MDIC3 U-MWBS3 U-MWGS3 U-MWUS3 Mirror units
1
U-D5BDRE U-D6BDRE U-P5BDRE U-5BDRE Revolving nosepieces for BD objective lenses U-D5BDREMC U-D6BDREMC U-P5BDREMC Motorized BD revolving nosepiece U-D6REMC Motorized BF revolving nosepieces
*1 F.N. of the observation tube is up to 22 with AF combination *2 U-ZPCB is not need with AF combination *3 U-POTP3 polarizer should be used in combination with U-DICRH.
IR SYSTEM DIAGRAM
BURNER ON
U-AN360IR Rotatable analyzer slider for IR U-POIR accessory WHN10x Eyepiece U-CMAD3 C mount adapter
Video cameras BD-M-AD Adapter to mount BF objectives U-TLUIR Single port tube with lens for IR U-LH100IR 100W halogen lamp housing for IR
U-POIR Reflected polarizer slider for IR U-BP1100IR U-BP1200IR Band path filters for IR U-25ND6 U-25ND25 ND filters
U-D7RE U-5RE-2 U-6RE U-D6RE U-D6RE-ESD Revolving nosepieces for BF objective lenses
U-LH100HG 100W mercury lamp housing U-LH100HGAPO 100W mercury apo lamp housing
LIFE TIME BURNER ON
Revolving nosepieces for BF
BX-RLA2 Reflected light illuminator for BF/DF U-KMAS Reflected light illuminator for BF BXFM-ILH Illuminator holder for BXFM
Objective lenses for brightfield/darkfield, brightfield and for near IR Exclusive DUV100x objective lens
U-DICR DIC slider for reflected light U-DICRH DIC slider for reflected light (high resolution type) U-DICRHC DIC slider for reflected light (high contrast type)
U-LH100L-3 100W halogen lamp housing U-LH100IR*2 100W halogen lamp housing for IR
AL110-VS6 6-inch vacuum stage U-SIC4L2/4R2 4" stage AL110-6 series Wafer loaders MX-SIC6R2 6" x 6" stage with built-in-clutch handle U-LGAD Fiber adapter for reflected light observation LG-SF Light guide
BXFM-ILHSPU Assist spring for BXFM BXFM-F BXFM frame BX51TRF BX51 reflected/transmitted frame SZ-STL Large stand
3
R
U-WHP2 Plate
U-ST Stand
U-25LBD U-25IF550 U-25Y48 U-25L42 U-25FR Filters U-BP1100IR U-BP1200IR Band path filters for IR
BH2-WHR43 4"-3" rotatable wafer holder BH2-WHR54 5"-4" rotatable wafer holder BH2-WHR65 6"-5" rotatable wafer holder
19
20
BX61/BX51/BX51M/BX41M-LED-ESD specifications BX61 Optical system Microscope frame Illumination UIS2 optical system (infinity-corrected) Reflected/transmitted External 12V100W light source Light preset switch LED voltage indicator Reflected/transmitted changeover switch Focus Motorized focusing Stroke 35mm Minimum graduation 0.01m Built-in 12V100W light source Light preset switch LED voltage indicator Reflected/transmitted changeover switch Reflected Built-in 12V100W light source Light preset switch LED voltage indicator Reflected (ESD capability) Built-in power supply for 3W white LED Light preset switch BX51 BX51M BX41M-LED
MX51 specifications Optics Microscope stand UIS2 optics (infinity-corrected system) 2-guide rack and pinion method Coarse and fine co-axial Z-axis control stroke 32mm (2mm upper and 30mm below from the focal plane) The same stroke 15mm (combination with transmitted illumination) Stroke per rotation of fine Z-axis control 0.1 mm (1 unit 1m) Coarse handle torque adjustment Coarse handle upper limit lever BX-RLA2 Brightfield/Darkfield illuminator Contrast changeover method Applicable observation mode BF-DF slide method q Brightfield w Darkfield e Nomarski DIC r Polarized light t IR 12V100W Halogen Lamphouse: U-LH100L-3 BX-URA2 Universal Fluorescence illuminator Mirror (Max. up to 6) turret method q Brightfield w Darkfield e Nomarski DIC r Polarized light t Fluorescence Mercury lamp house: U-LH100HGAPO External power supply BH2-RFL-T3 needed Power supply is integrated in MX51
Illumination
Stroke 35mm Fine stroke per rotation 100m Minimum graduation 1m With upper limit stopper, torque adjustment for coarse handle 65mm (w/o spacer)
Maximum sample height Observation tubes Widefield (F.N. 22) Super widefield (F.N. 26.5) Reflected light BF etc. illumination
25mm (w/o spacer) Inverted: binocular, trinocular, tilting binocular Erect: trinocular, tilting binocular Inverted: trinocular Erect: trinocular, tilting trinocular BX-RLAA Motorized BF/DF changeover Motorized AS BX-RFAA Motorized 6 position turret Built-in motorized shutter With FS, AS
Lamphousing
BX-RLA2 100W halogen (high intensity burner, fiber illuminator mountable) BF/DF/DIC/KPO FS, AS (with centering mechanism), BF/DF interlocking ND filter BX-URA2 100W mercury lamp, 75W xenon lamp 6 position mirror unit turret (standard: WB, WG, WU+BF etc) with FS, AS (with centering mechanism), with shutter mechanism
Reflected fluorescence
BX-AKMA-LED/BX-KMA-LED 3W white LED BF/DIC/KPO ESD capable Following features are for BX-AKMA-LED only : KPO/oblique illumination AS (with centering mechanism) Oblique illumination position settings Quintuple, sextuple (ESD capable), septipule
Transmitted illumination Power supply unit Continuous light intensity dial Observation tube Revolving nosepiece Stage
Brightfield MX-TILLK combined with fiber light guide illumination (configured with MX-SIC6R2) Rated voltage: 100-120/220-240V~1.8A/0.8A 50/60Hz U-BI30-2 Widefield binocular, U-TR30-2 Widefield trinocular, U-ETR4 Widefield erect image trinocular (F.N. 22) U-SWTR-3 Super widefield trinocular, MX-SWETTR/U-SWETTR-5 Super widefield erect image tilting trinocular (F.N. 26.5) U-5RE-2, U-6RE U-D5BDRE, U-D6BDRE, U-P5BDRE (with slider slot for DIC Prism) U-SIC4R2/SIC4L2 Coaxial right/left-hand control 4" x 4" stage MX-SIC6R2 Coaxial right/left-hand control 6" x 6" stage Drive method: rack and pinion method Y axis stopper: lever method Drive method: Belt method Stroke: 158(X) x 158 (Y) mm Clutch method: 2 clutch plates (Built-in-clutch ON/OFF handle) Holder dimensions: 200 x 200mm Transmitted light area: 100 x 100mm
Transmitted light
100W halogen Abbe/long working distance condensers Built-in transmitted light filters (LBD, ND25, ND6) Motorized sextuple Motorized quintuple, motorized sextuple, centering quintuple Sextuple, centering sextuple, septuple (optional motorized revolving nosepieces) Quintuple, centering quintuple, sextuple (optional motorized revolving nosepieces)
Revolving nosepieces
Dimensions/weight
Dimensions: Approx. 430(W) x 591(D) x 495(H)mm Weight: Approx. 26kg (Stand Approx. 11kg)
Coaxial left(right) handle stage: 76(X)x52(Y)mm, with torque adjustment Large-size coaxial left (right) handle stage: 100(X)x105(Y)mm, with lock mechanism in Y axis Approx. 318(W) x 602(D) x 541(H)mm Approx. 25.5 kg (Microscope frame 11.4 kg) Approx. 318(W) x 602(D) x 480(H)mm approx. 20.8 kg (Microscope frame 10.3 kg) Approx. 318(W) x 602(D) x 480(H)mm Approx. 19.5 kg (Microscope frame 9.8 kg) Approx. 283(W) x 455(D) x 480(H)mm Approx. 14 kg (Microscope frame 6.7 kg)
(unit: mm)
BX51 dimensions
175 187 400
(unit: mm)
45 124 45
209 84
209
471 45 124
527
geprufte Sicherheit
geprufte Sicherheit
BXFM Optical system Microscope frame Observation tubes Focus Widefield (F.N. 22) Super widefield (F.N. 26.5) Reflected light illumination BF etc. UIS2 optical system (infinity-corrected)
BXFM-S
84
BXFM specifications
90 41 318
56 90 318
Stroke 30mm, Fine stroke per rotation 200m, Minimum graduation 2m, with torque adjustment for coarse handle BX51M dimensions For inverted image: binocular, trinocular, tilting binocular For erect image: trinocular, tilting binocular For inverted image: trinocular For erect image: trinocular, tilting trinocular BX-RLA2 100W halogen (high intensity burner, fiber illuminator mountable) BF/DF/DIC/KPO FS, AS (with centering mechanism), with shutter mechanism BX-URA2 100W mercury lamp, 75W xenon lamp 6 position mirror unit turret (standard: WB, WG, WU+BF etc) with FS, AS (with centering mechanism), with shutter mechanism Sextuple, centering sextuple, septuple (optional motorized revolving nosepieces) Quintuple,centering quintuple, sextuple (optional motorized revolving nosepieces) Approx. 248 (W) x 587 (D) x 249 (H) mm Approx. 9kg (standard combination) Approx. 394 (W) x 334 (D) x 276 (H) mm Approx. 6.2kg (standard combination) BXFM-S dimensions (unit: mm) MX51 dimensions
430 175 471 45 124 464 45 124 175 187 400
(unit: mm)
BX41M-LED+BX-AKMA-LED dimensions
175 185 270
(unit: mm)
209
Reflected fluorescence
84
90 56 318
326
(unit: mm)
4540 20
124
219
**
231 252
88
98 373 498
21
22
388
93
451
32 106
187
290
481