Axminster 12 - Benches & Storage - p386-p404
Axminster 12 - Benches & Storage - p386-p404
12
With a benchtop manufactured from hand selected slow growing Nordic birch, this bench is built to last a lifetime of normal use, and comes with a 10 years warranty from Sjobergs of Sweden. The sturdy underframe is made from Scandinavian pine with a movement resisting H design. Both vices can be mounted on the front for heavy duty clamping or one at either end for clamping in two positions and maximum clamping distance. The Nordic bench is equally suited to right or left-handed working. There are four mounting locations for the vices allowing you to configure the bench to best suit your work. A double row of 19mm (3/4) dog holes runs from each of the four vice locations, giving an endless opportunity to clamp your work. 4 plastic coated steel bench dogs are supplied as standard, which help protect your edge tools. The bench dogs are reversible for thin workpieces and are held in place by a ball catch, so they dont drop out when setting your work; these push flush when not required. The top is varnished for longevity. Nordic benches can also be fitted with the accessory cupboard and drawer kit (0042) and the optional pair of Holdfasts (ST03), which can be located in any of the dog holes on the worktop or in the holes on the front legs of the bench. Made in Sweden. Model Overall L x W x H Weight Model Overall L x W x H Weight Model Overall L x W x H Weight Nordic Plus 1450 1,470 x 630 x 860mm 30kg Nordic Plus 1660 1,680 x 630 x 860mm 33kg Nordic Plus 1950 1,970 x 630 x 860mm 36kg
Holdfast 701867
1450 Bench 1660 Bench 1950 Bench 1450 Bench c/w Storage Module 1660 Bench c/w Storage Module 1950 Bench c/w Storage Module Storage Module (0042) Holdfast ST03 (Pack of 2) Anvil 19mm(3/4) Bench Dogs (Pkt 4)
Inc.vat 306.50 352.50 391.50 399.95 446.95 483.95 117.95 25.99 38.65 28.60
Ex.vat 255.42 293.75 326.25 333.29 372.46 403.29 98.29 21.66 32.21 23.83
Code 701861 701862 701863 474087 474076 474073 701870 701867 701868 475253
386
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Benches
Inc.vat 1500 Bench 418.96 Storage Module SM03 332.50 1500 Bench c/w Storage Module SM03 713.95
12
Bench dogs allow secure work holding on the bench top
Work Bench
Inc.vat 157.50
Ex.vat 131.25
Code 200309
Laminate Workbench
Inc.vat 129.95
Ex.vat 108.29
Code 210960
387
Benches
Elite 1500 110mm 85mm 1,515 x 740 x 900mm 104kg Elite 2000 110mm 85mm 1,945 x 740 x 900mm 122kg Elite 2500 110mm 85mm 2,520 x 740 x 900mm 140kg
EUROPEAN BENCH MAKING AT ITS FINEST! Sjobergs Elite cabinetmaker benches are constructed in European beech renowned for its toughness and longevity. The top is 85mm thick with a 110mm apron, ready treated with a premium quality enriching finishing oil. The specially developed vices provide enormous clamping power across their 600mm(23.1/2) width as well as accuracy and smoothness. The vices have an opening capacity of 145mm(5.3/4). The double row of round dogs is useable from both vices and across the worktop. Each Elite bench is supplied with four round steel bench dogs which can also be used in the bench legs. The Elite is quality all the way; construction, materials, design and finish. With a large range of accessories, the Sjobergs Elite Bench is the ideal foundation for your workshop.
Model Apron Depth Thickness of Top Overall L x W x H Weight Model Apron Depth Thickness of Top Overall L x W x H Weight
12
Rubber Vice Jaw Protectors QSH Quick Action Holdfast Steel & Aluminium Bench Dogs Toolsaver
Inc.vat 1500 Bench 1,269.50 1500 Bench c/w Storage Module SM03 1,519.50 2000 Bench 1,319.50 2000 Bench c/w Storage Module SM04 1,729.50 2500 Bench 1,529.50 2500 Bench c/w Storage Module SM04 1,919.50 Storage Module SM03 332.50 Storage Module SM04 496.50 Vice Jaw Protectors (1 pair) 65.50 Holdfast QSH 36.10 Steel Bench Dogs (Pkt 4) 83.95 Toolsaver for Bench Dogs 10.15
Ex.vat 1,057.92 1,266.25 1,099.58 1,441.25 1,274.58 1,599.58 277.08 413.75 54.58 30.08 69.96 8.46
Code 950936 718591 701865 718151 701866 718150 701871 701872 701873 701874 474565 476895
Inc.vat Ex.vat 1800 Two Sided Workbench 735.50 612.92 185mm York Carpenters Vice & Fitting Kit 80.95 67.46
388
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat Four Sided Bench 670.50 185mm York Carpenters Vice & Fitting Kit 80.95 Basic Twin Locker 110.50 16mm Birch Ply Twin Locker 219.95
12
Inc.vat 198.95
Ex.vat 165.79
Code 950942
Inc.vat 97.00
Ex.vat 80.83
Code 910119
Inc.vat 197.95
Ex.vat 164.96
Code 910120
389
Storage
12
Inc.vat 63.50
Ex.vat 52.92
Code 211897
Mobile Cabinet
Inc.vat 163.50
Ex.vat 136.25
Code 211520
Inc.vat 82.00
Ex.vat 68.33
Code 952825
390
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Bench Hook
Inc.vat 9.35
Ex.vat 7.79
Code 400419
Inc.vat 80.95
Ex.vat 67.46
Code 500229
Inc.vat 12.25
Ex.vat 10.21
Code 950111
12
Surface Clamp
Inc.vat 65.50
Ex.vat 54.58
Code 701279
Bench Anchor (Insert Nut) 25mm(1) Fastner Round Head 32mm(1.1/4) Fastner Round Head 38mm(1.1/2) Fastner Round Head 50mm(2) Fastner Round Head 25mm(1) Fastner Flat Head 32mm(1.1/4) Fastner Flat Head 38mm(1.1/2) Fastner Flat Head 50mm(2) Fastner Flat Head 27mm(1.1/16) Washer Round Head
Inc.vat 10.00 0.43 0.47 0.58 0.64 0.34 0.41 0.47 0.54 0.17
Ex.vat 8.33 0.36 0.39 0.48 0.53 0.28 0.34 0.39 0.45 0.14
Code 210539 510540 510541 510542 510543 510544 510545 510547 510548 510546
Inc.vat 9.85
Ex.vat 8.21
Code 610364
391
Inc.vat 15.90
Ex.vat 13.25
Code 340201
Inc.vat 26.70
Ex.vat 22.25
Code 202394
Levellers (Pkt 4)
Inc.vat 11.00
Ex.vat 9.17
Code 100218
Brass Nut - M10 (2) Brass Nut - M12 (2) Steel Nut - M10 (2)
Feet (Pkt 4)
Inc.vat 4.36
Ex.vat 3.63
Code 310480
Bench Stop
Inc.vat 4.96
Ex.vat 4.13
Code 340133
Inc.vat 55.96
Ex.vat 46.63
Code 200044
392
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Inc.vat 11.45
Ex.vat 9.54
Code 388019
626 Workmate
Inc.vat 73.96
Ex.vat 61.63
Code 910408
Telescopic Trestle
Inc.vat 22.40
Ex.vat 18.67
Code 611070
12
Folding Table
This is your standard folding trestle table 1,600mm(L) x 670mm(W) x 760mm(H) with an 18mm thick plywood top with a host of uses around the home and workshop. The tubular steel legs fold out and lock securely in position to form a stable platform. If heavy objects are placed on the table extra support may be needed; position an Axminster Lightweight Folding Trestle (900319) in the centre.
Inc.vat 9.10
Ex.vat 7.58
Code 910409
Inc.vat 63.95
Ex.vat 53.29
Code 388020
Inc.vat 26.45
Ex.vat 22.04
Code 952312
Trestle (1)
Inc.vat 10.66
Ex.vat 8.88
Code 900319
393
Tool Boxes
Inc.vat 4.50
Ex.vat 3.75
Code 702348
Inc.vat 35.99
Ex.vat 29.99
Code 200298
Toolbox Ends
How good are these? Its so easy to build a portable toolbox with these steel tool box ends and standard 19mm thick timber, ply etc. Each pair includes instructions, screws and four rubber feet, all you have to do is supply the wood. Finished, the toolbox provides a storage space 165mm(6.1/2) deep by 185mm(7.1/4) wide, the length of course is up to you, or exactly what tools you need to accommodate. These Ends are made from 20 gauge pressed steel for strength and have a durable red powder-coat finish. The rubber feet on the bottom protect the box and prevent surface marring. This is a great way to make a durable toolbox without spending too much time and effort. Countersunk magnets can be used to secure tools to the outside of your new tool box.
Inc.vat 32.99
Ex.vat 27.49
Code 700148
Inc.vat 8.20
Ex.vat 6.83
Code 611018
Wheeled Toolbox
Inc.vat 43.75
Ex.vat 36.46
Code 015130
394
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Storage Case
This 60mm deep storage case has up to 21 compartments, four rows are split into individual compartments by clip-in dividers. So fewer or larger compartments can be made by simply removing or rearranging the dividers. Overall size 360 x 290 x 65mm.
58mm dia x 78mm high (12) 79mm dia x 43mm high (12) Set of 6, 45 to 70mm dia.
Storage Case
Inc.vat 7.50
Ex.vat 6.25
Code 510030
Workshop Magnet
Use your energy on the project not the mishaps! Pick up those screws that just fell into the dust and shavings with the Axminster Workshop Magnet. The powerful magnet easily attracts all manner of metal bits and pieces; pull the release handle and theyre back in their box or wherever theyre needed. A great time saving addition to any tool box!
Workshop Magnet
Inc.vat 9.40
Ex.vat 7.83
Code 310077
12
Inc.vat 22.30
Ex.vat 18.58
Code 950990
10 Compartment
12 Compartment
9 Compartment
8 Pocket 12 Pocket
395
12 Pocket
Inc.vat 41.75
Ex.vat 34.79
Code 340425
12
Saw Case
Inc.vat 14.99
Ex.vat 12.49
Code 502253
6 Pocket 12 Pocket
13 Pocket
Inc.vat 5.56
Ex.vat 4.63
Code 700338
Tool Bag
Inc.vat 14.99
Ex.vat 12.49
Code 700063
396
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Work Belt
Inc.vat 3.55
Ex.vat 2.96
Code 733002
Inc.vat 11.90
Ex.vat 9.92
Code 700050
12
Tool Pouch R/H side Tool Pouch L/H side Belt with Back Support
Inc.vat 12.76
Ex.vat 10.63
Code 951006
Hammer Holder
A hammer holder which has an added velcro backing to support the weight on the Axminster back support belt (700050) and a loop to fit any other standard belt. Size 5.1/8 x 6 x 7/8 .
Inc.vat 4.75
Ex.vat 3.96
Code 951007
Belt Clip
Inc.vat 4.00
Ex.vat 3.33
Code 100213
397
Connell Klip System Padded Belt Attachment Connell Klip System Leather Work Belt
These heavy duty 50mm wide belts lie at the heart of the system. They feature the turnbuckle Klips that allow you to add, change or remove any of the other elements. The chemically blacked, top quality leather is both durable and water repellent. The sizes, 36 to 42 or 42 to 56 are not a reflection of your waistline. Bear in , mind that you will wear them over the top of your work trousers and you may want to add the padded belt attachment. For guidance the 36 to 42 is suitable for a waist size of about 32 to 36 . This Padded Belt Attachment offers you extra comfort and support. The carefully selected foam core has the ideal density to relieve the pressure. A ballistic nylon covering and a full length webbing reinforcement gives it durability. Double-stitched webbing belt loops keep it in place. The attachment is 100mm wide across your back to spread the load. It is suitable for most work belts as well as the Klip System.
Inc.vat 23.75
Ex.vat 19.79
Code 952935
12
Inc.vat 12.85
Ex.vat 10.71
Code 952943
Inc.vat 71.50
Ex.vat 59.58
Code 952936
Inc.vat 15.60
Ex.vat 13.00
Code 952937
Inc.vat 17.40
Ex.vat 14.50
Code 952944
398
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Hammer Holder
Inc.vat 14.99
Ex.vat 12.49
Code 952949
Inc.vat 17.75
Ex.vat 14.79
Code 952938
Inc.vat 16.45
Ex.vat 13.71
Code 952945
Inc.vat 25.90
Ex.vat 21.58
Code 952952
Inc.vat 50.95
Ex.vat 42.46
Code 952950
12
Inc.vat 46.99
Ex.vat 39.16
Code 952946
Inc.vat 13.00
Ex.vat 10.83
Code 952954
Inc.vat Scaffold Podger Spanner/ Tool Holder Single Scaffold Podger Spanner/ Tool Holder Double 12.85 13.45
Electricians Pouch
Inc.vat 47.26
Ex.vat 39.38
Code 952951
Inc.vat 18.95
Ex.vat 15.79
Code 952953
399
Tool Rail (330mm) Tool Rail (610mm) 3 x Magnetic Tool Rails (610mm)
Inc.vat 8.20
Ex.vat 6.83
Code 611020
Rack - 590mm
Inc.vat 10.00
Ex.vat 8.33
Code 950026
Turn this
Into this
12
19mm 25mm
Inc.vat 10.00
Ex.vat 8.33
Code 952968
Inc.vat 101.50
Ex.vat 84.58
Code 950989
Inc.vat 16.30
Ex.vat 13.58
Code 600892
4 Panels and 36 Hooks Additional Hooks (Pkt 36) Magnetic Clips (Pkt 4)
Inc.vat 9.85
Ex.vat 8.21
Code 200296
400
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Shelving
Timber not included
Inc.vat 20.60
Ex.vat 17.17
Code 611023
Inc.vat 29.56
Ex.vat 24.63
Code 952979
Inc.vat 18.65
Ex.vat 15.54
Code 611024
12
Wall bars supplied in pairs 610mm(24) long Inc.vat Ex.vat Upright Bars 610mm (Pair) 17.86 14.88 Arms 300mm (Pair) 11.70 9.75 Arms 450mm (Pair) 14.10 11.75 Code 010003 010004 010005
Adjustable Shelving
This is an easy to install wall mounted shelving system that can be the answer to many a workshop shelving problem. Made from tough polypropylene there is no risk of rusting as with steel shelves. The units are easy to fix, each upright has three fixing points. Shelf positioning is at 45mm centres on the upright. Four uprights, four brackets and two shelves in each pack allows for a variety of configurations, vertically, horizontally or individually. Each shelf is 800mm long and 250mm deep.
Inc.vat 82.00
Ex.vat 68.33
Code 952825
Shelving
Inc.vat 16.20
Ex.vat 13.50
Code 702346
401
Shelving
3 Shelf Unit
Inc.vat 46.00
Ex.vat 38.33
Code 211896
12
5 Shelf Unit
Inc.vat 51.00
Ex.vat 42.50
Code 211894
Inc.vat 63.50
Ex.vat 52.92
Code 211897
Inc.vat 69.95
Ex.vat 58.29
Code 718676
2 Shelf Unit
Inc.vat 35.99
Ex.vat 29.99
Code 211895
Inc.vat 4.96
Ex.vat 4.13
Code 210320
12 Piece Set
Inc.vat 17.80
Ex.vat 14.83
Code 700164
402
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95
Wall Hook
Inc.vat 3.20
Ex.vat 2.67
Code 310167
25mm Hook, 300mm Strap 25mm Hook, 400mm Strap 25mm Hook, 500mm Strap 50mm Hook, 300mm Strap 50mm Hook, 400mm Strap 50mm Hook, 500mm Strap
Wall Hook
Inc.vat 5.70
Ex.vat 4.75
Code 310171
Inc.vat 7.15
Ex.vat 5.96
Code 310174
Inc.vat 79.50
Ex.vat 66.25
Code 211898
Inc.vat 2.45
Ex.vat 2.04
Code 340438
Timber not included
12
Inc.vat 3.35
Ex.vat 2.79
Code 310169
8mm x 5mm (10) 10mm x 3mm (10) 10mm x 5mm (10) 19mm x 3mm (6)
Inc.vat 56.95
Ex.vat 47.46
Code 950127
Inc.vat 14.10
Ex.vat 11.75
Code 310168
403
Inc.vat 90.00
Ex.vat 75.00
Code 951683
Workshop Trolley
Inc.vat 83.95
Ex.vat 69.96
Code 417010
Pallet Truck
Inc.vat 216.00
Ex.vat 180.00
Code 800400
150kg capacity, table size 740mm x 450mm 500kg capacity, table size 855mm x 500mm
Sack Truck
Inc.vat 37.30
Ex.vat 31.08
Code 510194
Inc.vat 99.95
Ex.vat 83.29
Code 950502
Inc.vat 17.75
Ex.vat 14.79
Code 200066
Wheel 250mm
Inc.vat 7.66
Ex.vat 6.38
Code 200456
Wooden Cart
Inc.vat 71.50
Ex.vat 59.58
Code 200065
404
Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95