Professional Documents
Culture Documents
Science PSLE Preparations
Science PSLE Preparations
PSLE preparations
Body system
The body system is made up of several different systems, including the digestive system, the respiratory system vice versa. They are all interdependent and our body would not be able to work properly without any one of them.
The Mouth
When food is placed in my mouth, we will chew the food into smaller pieces with our teeth. The teeth will cut and grind the food into smaller pieces and speed up the process of digestion and aid in the swallowing process. The teeth are also made up of different types. The front ones, known as incisors, will cut and break the food into smaller pieces. Then, the grinding teeth at the back of our mouth cavity, known as molars, will mash the food up into pieces. The process does not involve any chemical change of food substances; hence, we can say that the teeth play a part in the mechanical digestion of the food we eat. The salivary glands will secrete saliva which serves to digest the cooked starch into maltose as saliva contains salivary amylase. However, the food usually does not stay in the mouth long enough for all the starch to be digested into maltose. Saliva will also soften the food and make it easier for us to swallow the food. The tongue then rolls the food into a ball and sends it to the back of the mouth cavity, so that we can swallow. The food then enters the oesophagus through the process of swallowing.
The oesophagus
The oesophagus or the gullet joins the mouth to the stomach. Peristalsis then occurs in the gullet as the oesophagus move the down the alimentary canal. Peristalsis refers to the wave-like muscle contraction of the gut, to propel food forward. The gullet contains muscles. The contraction and relaxation of the muscles help to push the food substances through the systems. Hence, the alternate contraction and relaxation of the muscles along the wall of the oesophagus forces the food ball down towards the stomach. Although no digestion occurs on the oesophagus, digestion of the starch by the saliva amylase may still continue.
The stomach
The stomach is a muscular bag that contracts and relaxes. Peristalsis of the stomach will break the food down into smaller pieces to speed up the rate of digestion, and to mix the food substances with the gastric juices. The gastric juices in the stomach are secreted by the gastric glands found on the wall of the stomach. The gastric juice contains protease that will digest protein into polypeptides. Dilute hydrochloric acid which provides acidic medium for the proteases to function optimally. The acid also kills any harmful bacteria present in food. The stomach also contains water. The walls of the stomach will produce mucus which functions to lubricate the food and protect the walls of the stomach from being corroded by the acid produced. This is also why if we do not eat our meals regularly, the digestive juices and acids will be secreted on an empty stomach, leading to gastric ulcers on the walls of the stomach as the acid digests the stomach wall. The food will stay in the stomach for about two to six hours and will appear as a black liquid after some time.
*Absorption
The absorption of food takes place in the small intestine. Digested food, which exists as small soluble molecules, will pass through the walls of the small intestine into the bloodstream during absorption. Hence, the movement of food though the walls of the alimentary canal is called absorption. Only small, soluble and diffusible substances such as glucose and amino acids can pass through the walls of the small intestine. Larger particles like starch or protein cannot pass through and be absorbed. In the small intestine, finger-like projections, known as Villi are present. The diagram above shows a cross section of a single villus in the small intestine. There are thousands of Villi present n the small intestine. The Villi are highly convoluted or coiled up, and contain blood capillaries that will transport the absorbed nutrients to all parts of the body. The Villi bring blood closer to aid in absorption. It also increases the surface area to speed up the rate of absorption.
The liver
The liver is a large reddish gland that is responsible for the secretion of bile into the small intestine. Bile is a yellowish-green liquid that is produced by the liver and stored in the gall bladder before being secreted into the small intestine via a bile duct. While bile does not contain digestive enzymes, it plays an important role of breaking the fats down into smaller oil droplets. will increase the area for lipase to act on. Hence, rate of digestion will increase in the presence of bile. This the any
The pancreas
The pancreas is a gland that produces alkaline digestive juices. The pancreatic juice contains an amylase, a protease and a lipase. The alkaline nature of the juice helps to neutralize the acid in the food from the stomach. It is also necessary to have an alkaline medium for the enzymes secreted into the small intestine to function optimally. Hence, some of the processes that will take place in the presence of the pancreatic juice includes, the complete digestion of maltose by pancreatic juices, the digestion of maltose by maltase, the digestion of polypeptides to amino acids by protease and the digestion of fats to fatty acids and glycerol by lipases.
Large intestine
The large intestine is where undigested food substances like fibers, will enter the body. It is important to include fiber in our diet since it provides the bulk of the food masses passing through the alimentary canal. The fiber also absorbs the poisonous wastes, it can help too to satisfy our hunger and can help to control and maintain our weight. Fiber can be obtained from whole meal bread, wheat, fruits and vegetables. The large intestine is about 1.5 meters long and consists of colon, the rectum and the anus. In the large intestine, water is absorbed and mineral salts such as zinc, iron and calcium, which are necessary for the development of the body, are also absorbed. The absorption of water and minerals occur at the colon, leaving behind an almost solid waste known as feaces. The feaces is then stored temporarily in the rectum and is excreted from our body through the anus.
Frequent questions***
Define digestion: Digestion is the process whereby large, insoluble food substances are broken
down into smaller, diffusible molecules so that they can be absorbed by the body.
How do the Villi help in the absorption of food: The Villi finger-like projections in the small intestine
and are highly convoluted or coiled up, they contain blood capillaries that will transport the absorbed nutrients to all parts of the body. The Villi bring blood closer to aid in absorption. It also increases the surface area to speed up the rate of absorption.
Circulatory system
The Heart
The heart is a ball of muscles that pumps blood to all parts of the body. It has two atria, the chambers which receive blood returning to the heart and two ventricle, the chambers that pump blood out of the heart. Oxygen rich blood from the lungs enters the left atrium of the heart and into the left ventricles of the heart before exiting to the rest of the body, while deoxygenated blood enters from the right atrium of the heart and into the right ventricle before exiting to the lungs. Valves are located in the heart to prevent blood from flowing backwards.
Blood
Blood is the circulating tissue composed of fluid plasma and cells. The main components of the blood are the red blood cells, the white blood cells, plasma and the platelets. The blood actually acts as a medium of transportation of substances around the body. Through the circulatory system, blood is pumped to all parts of our body. By transporting blood throughout the body, it connects the aqueous environment of all the body cells together.
Blood cells
There are all together three types of blood cells, the red blood cells, the white blood cells and the platelets.
different is that they do not have a nucleus, thus they cannot self divide and, red blood cells are actually produces by the bone marrow. Platelets
Platelets are small fragments of cells. They help to clot the blood and stop bleeding. When we bleed, the platelets with gather at the point of the bleeding and form something like a plug and plug up the cut and clot up the blood, preventing excess blood loss
Plasma
Majority of the blood volume consists of liquid plasma. The blood and other blood cells are suspended in the plasma along with many other substances. Carbon dioxide, dissolved nutrients, waste product together with antibodies, blood protein, hormones and ions can be found in plasma blood. It is now known as tissue fluid. The tissue fluid acts as a medium between cells and blood. The exchange of waste substances for useful substances occurs between cells and the tissue fluids by osmosis, diffusion or active transport.
10
Respiratory system
The respiratory system is very important to our body. It helps us to respire, as respiration is a very important process, without it we will die.
Lung
The lungs of mammals have a spongy texture and are honeycombed with epithelium, having a much larger surface area in total than the outer surface area of the lung itself. The lungs of humans are a typical example of this type of lung. Human lungs are located in two cavities on either side of the heart. Though similar in appearance, the two are not identical. Both are separated into lobes by fissures, with three lobes on the right and two on the left. The lobes are further divided into segments and then into lobules, hexagonal divisions of the lungs that are the smallest subdivision visible to the naked eye. The connective tissue that divides lobules is often blackened in smokers and city dwellers. The medial border of the right lung is nearly vertical, while the left lung contains a cardiac notch. The cardiac notch is a concave impression moulded to accommodate the shape of the heart. Lungs are to a certain extent 'overbuilt' and have a tremendous reserve volume as compared to the oxygen exchange requirements when at rest. Such excess capacity is one of the reasons that individuals can smoke for years without having a noticeable decrease in lung function while still or moving slowly; in situations like these only a small portion of the lungs are actually perfuse with blood for gas exchange. As oxy gen requirements increase due to exercise, a greater volume of the lungs is perfusing, allowing the body to match its carbon dioxide or oxygen exchange requirements. Additionally, due to the excess capacity, it is possible for humans to live with only one lung, with the other compensating for its loss. The environment of the lung is very moist, which makes it hospitable for bacteria. Many respiratory illnesses are the result of bacterial or viral infection of the lungs. Inflammation of the lungs is known as pneumonia; inflammation of the pleura surrounding the lungs is known as pleurisy. Vital capacity is the maximum volume of air that a person can exhale after maximum inhalation; it can be measured with a spirometer. In combination with other physiological measurements, the vital capacity can help make a diagnosis of underlying lung disease.
11
Processes of breathing
Breathing is largely driven by the muscular diaphragm at the bottom of the thorax. Contraction of the diaphragm pulls the bottom of the cavity in which the lung is enclosed downward, increasing volume and thus decreasing pressure, causing air to flow into the airways. Air enters through the oral and nasal cavities; it flows through the larynx and into the trachea, which branches out into the main bronchi and then subsequent divisions. During normal breathing, expiration is passive and no muscles are contracted (the diaphragm relaxes). The rib cage itself is also able to expand and contract to some degree, through the action of other respiratory and accessory respiratory muscles. As a result, air is sucked into or expelled out of the lungs. This type of lung is known as bellow lungs as it resembles a blacksmith's bellows.When you inhale, the diaphragm and inter costal muscles (those are the muscles between your ribs) contract and expand the chest cavity. This expansion lowers the pressure in the chest cavity below the outside air pressure. Air then flows in through the airways (from high pressure to low pressure) and inflates the lungs. When you exhale, the diaphragm and intercostal muscles relax and the chest cavity gets smaller. The decrease in volume of the cavity increases the pressure in the chest cavity above the outside air pressure. Air from the lungs (high pressure) then flows out of the airways to the outside air (low pressure). The cycle then repeats with each breath. In humans, the trachea divides into the two main bronchi that enter the roots of the lungs. The bronchi continue to divide within the lung, and after multiple divisions, bronchioles are given rise. The bronchial tree continues branching until it reaches the level of terminal bronchioles, which lead to alveolar sacs. Alveolar sacs are made up of clusters of alveoli, like individual grapes within a bunch. The individual alveoli are tightly wrapped in blood vessels and it is here that gas exchange actually occurs. Deoxygenated blood from the heart is pumped through the pulmonary artery to the lungs, where oxygen diffuses into blood and is exchanged for carbon dioxide in the haemoglobin of the erythrocytes. The oxygen-rich blood returns to the heart via the pulmonary veins to be pumped back into systemic circulation. Within each air sac, the oxygen concentration is high, so oxygen passes or diffuses across the alveolar membrane into the pulmonary capillary. At the beginning of the pulmonary capillary, the hemoglobin in the red blood cells has carbon dioxide bound to it and very little oxygen. The oxygen binds to hemoglobin and the carbon dioxide is released. Carbon dioxide is also released from sodium bicarbonate dissolved in the blood of the pulmonary capillary. The concentration of carbon dioxide is high in the pulmonary capillary, so carbon dioxide leaves the blood and passes across the alveolar membrane into the air sac. This exchange of gases occurs rapidly (fractions of a second). The carbon dioxide then
12
leaves the alveolus when you exhale and the oxygen-enriched blood returns to the heart. Thus, the purpose of breathing is to keep the oxygen concentration high and the carbon dioxide concentration low in the alveoli so this gas exchange can occur! You don't have to think about breathing because your body's autonomic nervous system controls it, as it does many other functions in your body. If you try to hold your breath, your body will override your action and force you to let out that breath and start breathing again. The respiratory centers that control your rate of breathing are in the brainstem or medulla. The nerve cells that live within these centers automatically send signals to the diaphragm and intercostal muscles to contract and relax at regular intervals. However, the activity of the respiratory centers can be influenced by several factors. Oxygen can affect the activities; specialized nerve cells within the aorta and carotid arteries called peripheral chemoreceptor monitor the oxygen concentration of the blood and feedback on the respiratory centers. If the oxygen concentration in the blood decreases, they tell the respiratory centers to increase the rate and depth of breathing. Carbon dioxide too, peripheral chemoreceptor also monitor the carbon dioxide concentration in the blood. In addition, a central chemoreceptor in the medulla monitors the carbon dioxide concentration in the cerebrospinal fluid (CSF) that surrounds the brain and spinal cord; carbon dioxide diffuses easily into the CSF from the blood. If the carbon dioxide concentration gets too high, then both types of chemoreceptor signal the respiratory centers to increase the rate and depth of breathing. The increased rate of breathing returns the carbon dioxide concentration to normal and the breathing rate then slows down. Stretch receptors in the lungs and chest wall monitor the amount of stretch in these organs. If the lungs become over-inflated (stretch too much), they signal the respiratory centers to exhale and inhibit inspiration. This mechanism prevents damage to the lungs that would be caused by over-inflation. Signals from higher brain centers, nerve cells in the hypothalamus and cortex also influence the activity of the respiratory centers. During pain or strong emotions, the hypothalamus will tell the respiratory centers to speed up. Nerve centers in the cortex can voluntarily tell the respiratory center to speed up, slow down or even stop (holding your breath). Their influence, however, can be overridden by chemical factors (oxygen, carbon dioxide, and pH). Nerve cells in the airways sense the presence of unwanted substances in the airways such as pollen, dust, noxious fumes, water, or cigarette smoke. These cells then signal the respiratory centers to contract the respiratory muscles, causing you to sneeze or cough. Coughing and sneezing cause air to be rapidly and violently exhaled from the lungs and airways, removing the offending substance. Of these factors, the strongest influence is the carbon dioxide concentration in your blood and CSF followed by the oxygen concentration.
13
Sometimes the respiratory centers go temporarily awry and send extra impulses to the diaphragm. These impulses cause unwanted contractions (hiccups). The same thing happens in unborn children; many pregnant women often feel their babies hiccup. This happens because the respiratory centers of the developing child's brain are working just like those of an adult even though they are not yet breathing air.
14
Magnet Notes
A magnet is a special piece of metal that can attract other objects. But it can only attract objects made of iron, steel, nickel or cobalt. These materials are called magnetic materials. A magnet can be natural or man-made. Natural magnets are made of lodestones. Man-made magnets are made from materials such as iron or steel. Magnets can also come in many different shapes and sizes. The most common shapes are button, ring, bar, strip, rod, U-shaped and horseshoe shape. The strongest parts of a magnet are its two poles, the North and the South. The centre of the magnet is usually very weak. A freely suspended magnet will always hang in a North- south position. Like poles of a magnet (North-North) repels each other while the unlike poles (South- North) attract each other. Magnetic force can pass through non-magnetic substances like glass, wood, plastic. But it cannot pass through magnetic substances. Magnetic strength of a magnet can be reduced by hitting it many times or by heating it continuously. Electromagnet can be formed using two methods. Either by stroking a magnetic substance with a magnet or by twirling wires over it and connect it to batteries. The second method is usually used in factories to retrieve large pieces of metal from the pile of rubbish as it can be turned on and off and is stronger than the stroking method. So when we slam refrigerator doors often, we are reducing the strength of the magnet strip on the door.
15
Solar System
The sun, the moon, Earth and the other planets make up the solar system. The names of the names of the planets from the nearest to the furthest are, Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and Neptune. The planets travel on their own orbit, which is a fixed path that an object takes around something else. The planets can be seen because they reflect the light from the sun to our eyes, so we are able to see them. Planets are objects that revolve around the sun and do not give off light on its own.
Man-made Satellite
Man-made satellites are used in many different ways in space.
Communications To provide long distance communication links To transmit data to various parts of the world. Scientific Research To observe the Earths upper atmosphere, stars, planets in the universe. Weather forecasting To study the weather pattern on the earth by obtaining the information of the clouds, winds and temperatures To find the amount and types of pollutant in the air.
Navigation To help ships and airplanes determine their exact location on Earth.
The Sun
The sun is a huge star that gives off its own light. It is made up of a huge ball of gases. It provides plans with light to perform photosynthesis as it cannot take place without light. It also allows us to see things around us. Heat energy is also given off by the sun to warm us up and prevent us from freezing. The sun rises in the east and sets in the west. Direct staring at sun can cause us temporary blindness. If too much ultra-violet ray reach the Earth, our skin will become darker and we may have skin diseases.
The Earth
It is the fifth largest planet in the solar system. The earth is mostly made up of rock metal and water. It is also surrounded by a layer of gas which traps heat for within the earth and shield
16
the earth from the suns harmful ultra-violet rays, and this layer of gas form the atmosphere. The earth does not give off its own light, instead, it reflects the light from the sun so, is visible when we look at it in space. The rotation of the earth on its own axis which takes 24 hours each round, gives rise to the day and night cycle. It takes one year to rotate on complete round around the sun and each year is 365 days. We are only able to live on earth as its position is just right from the sun and there is food for us to eat and air for us to breathe, whereas water also exist in liquid state.
The Moon
There is no air or water on the moon so it does not support life. It does not give off its own light as it merely reflect the suns light allowing us to see it at night. It is the earths one and only natural satellite. The regular movement of the moon and the gravity of the moon give rise to the high and low tides.
17
Types of forces
Magnetic force: Magnetism is the force that electric currents exert on other electric currents. Magnetism may be created by the motion of electrons in the atoms of certain materials, which are called magnets. Magnetic force may also be produced by ordinary electric current flowing through a coil of wire, called an electromagnet. The magnetic force may cause attraction or repulsion--that is, it may pull magnets together or push them apart. A magnet attracts iron, steel, nickel, and certain other materials. The attracted materials then become magnets themselves in a process called magnetization. A steel nail placed near a magnet, for example, becomes magnetized and can attract a second nail. Magnetization occurs because the magnet causes spinning particles called electrons in the atoms of the nail to align along the magnet's field lines. The atoms with aligned electrons then act like tiny bar magnets. Force of a magnet is strongest at the poles Like poles repel, unlike poles attract It can act at a distance The strength of a magnet does not depend on its shape or size The strength of a natural magnet, a lodestone, cannot be increased Earth is the largest piece of magnet The strength of a magnet varies The strength of a magnet can be decreased by hammering, dropping or heating it Temporary magnets can be created using the stroking and electromagnetism methods
18
Elastic spring force: It is the force founding the spring when it is compressed or stretched. When this force is exerted on a spring, the spring will in turn exert a force on whatever is stretching or compressing it.
The weight of the object stretches the elastic band or spring The heavier the object, the greater the extension
Gravitational force: It is the force of attraction between the Earth and any object on Earth. Gravity is a force that prevents things from falling out of the Earth Gravity causes falling objects to fall downwards Gravity causes a spring to stretch or extend A very strong force is needed to resist the pull of gravity There is zero gravity in space
Weight is the gravitational force put forth on an object by the planet on which the object is located. The weight of any object depends on the distance from the object to the centre of the planet and the mass of the object. An object's weight is largest if the object is on the surface of the planet. The weight becomes smaller if the object is moved away from the planet. The object has no weight in space where the gravitational force acting on it is too weak to be measured. The weight of an object also depends on the mass of the planet. If the mass of a planet is smaller than that of the earth, the gravitational force there is smaller. For example, a man who weighs 91 kilograms on the earth would weigh only 15 kilograms on the moon. He would weigh 34 kilograms on Mars, 82 kilograms on Venus, and 234 kilograms on Jupiter. Friction is the property that objects have which makes them resist being moved across one another. If two objects with flat surfaces are placed one on top of the other, the top object can be lifted without any resistance except that of gravity. But if one object is pushed or pulled along the surface of the other, there is a resistance caused by friction. Friction has many important uses. It makes the wheels of a locomotive grip the rails of the track. It allows a conveyor belt to turn on pulleys without slipping. You could not walk without friction to keep your shoes from sliding on the pavement. This is why it is hard to walk on ice. The smooth surface of the ice produces less friction than a pavement and allows shoes to slip. Friction also has disadvantages. It produces heat that may cause objects to wear. This is why oil and other
19
lubricating liquids are used to fill spaces between moving machinery parts. The liquid reduces friction and makes the parts move more easily and produce less heat. Laws of friction: The basic law of friction says that the force needed to overcome friction is proportional to the total normal, or perpendicular, force pressing one surface against the other. That is, when the weight of a box being pulled across a floor is doubled, the force necessary to pull it must be doubled. When the box weighs four times as much, four times as much force must be used to pull it. The ratio between the weight being moved and the force pressing the surfaces together is called the coefficient of friction (C.F.). The value of the C.F. depends on the type of surfaces moving against each other. The coefficient of friction equals the force needed to move an object divided by the force pressing the surface together. This can be written C.F. = F/P. The advantages of friction It lets people walk without slipping It enables car wheels to stop spinning and thus stop a moving vehicle It starts movements without slipping It enables us to hold on to things It produces heat
20
Simple Machines
Machines help us to do work more easily, quickly and efficiently. A force is needed to operate these machines. Simple machines also help us to do work easily by reducing the distance travelled by the load, distance the effort needs to travel, by reducing the effort needed to lift the load. There are many types of simple machine. When, more than one simple machine is used in one object it is complex machine.
Lever
A lever enables us to use a smaller force to overcome a larger force. When we want to lift a heavy load with the least effort, place the fulcrum as near to the load as possible, apply effort as far from the fulcrum as possible. hen an effort moves a greater distance than the load, less effort is used to lift the load.
Pulleys
A pulley has a wheel that rotates freely. The load is tied to a rope that winds around the wheel. There are two types of pulley, moveable and fixed pulley.
21
Pulley System
It which consists of a fixed and a movable pulley is often used to raise heavy loads. It changes the direction of a force and also reduces the effort needed to lift a load. The load and effort move in opposite directions. It is commonly used in lifts and cranes.
Inclined plane
An inclined plane is a sloping surface. It helps us to do work by reducing effort to move heavier load from a lower level to a higher level. The longer the slope, the lesser the effort needed to travel up but the effort has to travel a longer distance. Factors that affect the amount of effort needed: The angle of inclination The weight of the load The steepness of the inclined plane The roughness of the inclined plane
Gears
Gears are wheels with teeth that can interlock one another. They help us do work by changing the direction of rotation or applied force or changing the speed at which an object moves. Gears move in the opposite directions of the next gear interlocked with it. Gears are usually placed together with other gears so that the tooth of one gear fits into the notches of the other. Gears can be connected by a chain. Examples are eggbeaters and bicycles.
22
Faucets A key A simple machine is made of a small rod stuck to a big wheel. It is actually a lever; the fulcrum is at the centre of the rod. If the wheel is bigger than the axle, less effort is required. However, the distance moved by the effort is greater than the distance moved by the load.
23
Plants
Plants are living things; they play a very important role in maintaining the amount of oxygen and controlling the amount of carbon dioxide in the atmosphere for us to respire. A plant is generally considered as a living organism that manufactures its own food (autotrophic). A plant is usually immobile and functions on the spot. However, they are able to move and respond to changes. A good example would be plant left in a dark box with only a small hole at the other end of the box. A few weeks later, you will find that the plant is growing towards the hole. Doesnt that show that plants are able to move and respond to changes? A plant is basically made up of leaves, stem and roots. A mushroom is definitely not a plant. It is a fungus as it does not have leaves, stem or roots. Moreover, it cannot make its own food.
Leaves
The leaf of a plant can have many textures, smooth, hairy, waxy and rough. The plants leaves have special designs. There are toothed edged, lobbed edges, and entire edges. These are a few of the most common ones. The plants can also be classified by the veins. Leaves help the plant to make food and are also called, the plants kitchen. The leaf contains chlorophyll which causes the leaf to appear green. Some leaves may also appear yellow or orange, but they still contain chlorophyll as it is hidden under the color pigments of the leaf. The chlorophyll absorbs sunlight and together with water from the roots and the carbon dioxide that it gets, it photosynthesizes and makes food and oxygen is a byproduct of photosynthesis. It will be given out by the plant for us to respire and give out carbon dioxide for the plants. The plant has veins on the leaves
that will transport water from the roots to all parts of the leaf and also collects the food at the stalk of the leaf and wait to be transported to other parts of the plant. There are two different types of veins, the network vein and parallel vein. The network vein is like a network
24
just as its names states and branches to all parts of the leaf. The parallel veins are positioned in a parallel position. The cactus has adapted to have needle-like leaves to minimize water lose through transpiration. The plant respires and gets carbon dioxide for photosynthesis from this small opening found on the underside side of the leaf. It also releases excess water as water vapor. It is mostly located at the underside of the leaf to prevent too much water loss as the sun might dry the leaf up. It acts like our nose and allow air in and out.
Roots
The root may look plain and useless, but actually, it plays a vital role in ensuring that the plant survives. When the plant photosynthesizes, the water that is needed comes from the root. The root takes in water and the water is transported to the leaves. It also anchors the plant firm in the ground and prevents it from flying out of the soil at the slightest wind. The two most common types of root are the fibrous root and the tap root
25
The Stem
The stem is a very important part of the plant. Stems have a circular layer of cells called the cortex under the epidermis, a thin, skin-like layer of cells lying in seeds, plants and ferns which will protect he plant parts. Bundles of Xylem tubes, that transport water and dissolved minerals absorbed by the roots, and Phloem tubes, that transports food made by the leaf, are arranged in a ring beneath the cortex. The xylem lies towards the inside of the bundle, and the phloem tube is towards the outside. Dicotyledonous stems also have a band of cells called the cambium, which lies between the Xylem tube and the Phloem tube within the bundle. It also helps to keep a plant upright. Some plants have weak stems, so they cannot stand up on their own; they cling on to supports or other plants for support.
Flower
The flower is a very interesting part of a plant. It grows when a plant matures. The flower is made up of two parts, the male and female parts. Not all types of plant have both the male and female parts in one flower. The basic part of a flower is the petal, stigma, ovary, style, ovule, filament, anther and sepal. The anther, where the male reproductive cells are, is supported by the filament. The stigma is the female part of the plant where the pollen sacs will land on. The style is the passage that leads to the ovary and the ovules are female reproductive cells that will fuse with the male reproductive cells to form seeds. After the flower is fertilized, the petals will drop off, the ovary will start to swell and a fruit is formed over time. The sepal is the part that protects the plant when it is still a bud. Pollination is the process whereby the pollen lands on the stigma. The pollen can be transferred through several ways. Insects like bees and butterflies lands on flowers to such the nectar and the pollen grain will stick to their legs and will drop off when they land on the next plant. Another way is for the wind to blow the pollen and the pollen will land on the flower, fertilizing it. But this method is only workable for flowers with large droopy and feathery
26
stigma to catch the pollen in the air. Flowers pollinated this way does not need to have colorful petals as they do not need to attract insects. Pollination can also be grouped into two types, self pollination and cross pollination. Self pollination is the pollen of the same plant fertilizing the flowers of the same plant, while cross pollination is the pollen of one plant fertilizing the flowers of another plant. The advantage of self pollination is that the good points of one plant will continue to be present in the young plant. The disadvantage is that if the adult plant has a disease of is prone to a disease, the young plant would also be diseased or prone to that disease. The advantages of cross pollination are that the plants may get good points of both the plant that fertilized it and the plant that is fertilized. The disadvantage is that the plant that fertilizes the plant may have some unknown disease and pass it on to the young plant. Fertilization occurs after pollination. The pollen rain that lands on the stigma makes a pollen tube and travels to the ovary where its nucleus will fuse with the nucleus of the female reproductive cell of the flower, the ovule. After the ovule is fertilized the ovary becomes the fruit and the other parts of the flower outside the ovary wilts and dies, leaving the fruit to grow. The fruit will contain and protect the seeds that are needed to ensure the continuity of the species of plant.
Seed dispersal
Different plant can have different methods of seed dispersal. The seed is dispersed so as to prevent the young plant from growing too near to the adult plant and to prevent overcrowding and the competition for water and nutrients, promoting healthy growth of the young plant. A common type of dispersal is by wind. The seeds dispersed by wind are small and light. They may also have special structures like umbrella structures or wing-like structures that enable them to float for a longer distance away from the adult plant. The wind can also carry away seeds that have a fluffy covering. Fruits that disperse its seeds by water can float on water and have a fibrous husk that can trap air. They also grow just beside rivers or seaside so that their seeds can be carried away by water. Although fruit like coconut which is dispersed by water is heavy, when their kernel, which contains water dries up, they simultaneously lose a lot of weight.
27
Fruits which are dispersed by splitting must be dry and can open with explosive force. When the seed is dispersed, they seed flies in all directions at high speed. There are also other types which just split open, but with no explosive force as the wind will carry the seeds away. Some fruit disperse seeds with the help of animals. There are two types of animal dispersal; the first type is the animal eats the whole fruit and the hard indigestible seeds will pass out as feaces and the plant will grow. Plants dispersing seed in this way has nice smelling and nice tasting fruit to lure animals to eat them. Another type is that the seeds have stiff hooks and cling onto the fur of passing animals and drop off after a while as the plant moves. Plants can also reproduce in many other ways. One of them is by suckers. The adult plant matures and a sucker will grow from its stem and that will be the young plant. The young plant will get nutrients directly from the adult plant and as the young plant grows larger, the adult plant dies. The advantage of this is that the adult plant will provide it food and ensures that the young plant grows healthily. Another ways is by using underground stem. The method is by digging the stem out, cutting the part of the stem that has the bud and growing it. Some plants also can use their roots to reproduce by cutting the head of the root and planting it. As time passes, a young plant will grow from it. But these only apply for special plants that have specially adapted roots and underground stem. Plants also can reproduce from spores. But that only applies for ferns. Ferns do not flower, thus they do not need pollination or flowers. They reproduce by spores which are carried by the wind and when the spores land, the new fern grow. Each fern has a lot of spore so as to ensure that some of the spore will develop into adult ferns as it is not confirmed that the spores would land on a spot which is suitable for the growth of the young fern.
28
trapping sunlight for sunlight for photosynthesis. Without chlorophyll, the plant cannot make its food. The chlorophyll is embedded in the chloroplast. Coleus, croton and copper leaf plants are plants with colorful leaves. They also have chlorophyll that is hidden under the red and yellow pigments of the leaves. Glucose and oxygen are products of photosynthesis. Plants produce sugar in glucose for many uses. It can be used to build leaves, flowers, fruits and seeds; it can also be converted cellulose in building of their cell wall. An extremely important product of photosynthesis is oxygen. The oxygen that the plants give off is what we breathe in for respiration and the carbon dioxide that we breathe out is taken in by the plants for photosynthesis. Some plants not only carry out photosynthesis but also trap insects to get more nutrients.
Food Source & Energy Source of Animals All life on Earth depends, directly on directly, on photosynthesis as a source of food, energy, and oxygen, making it one of the most important biochemical processes known. Plants usually make more sugar than they need. The excess sugar is converted into starch and stored in different parts of the plants. These stored reserves are used by plants for extra energy or building materials. The storage part of the plant can be either the roots, seeds or stem. Iodine is used to test for starch. In a starch test, there is iodine in a substance if the iodine turns dark blue. As plants can make their own food, they are called food producers. Animals and other organisms do not have the ability to make food so they depend on other organisms and are called food consumers. There are several types of food consumers: Herbivores: Plant eaters Carnivores: Meat Eaters Omnivores: Plants and meat eater Insectivore*: Insect eaters Frujitivore*: fruit eater
29
Respiration All living things respire. Unlike photosynthesis which only takes place in the presence of light, respiration takes place all the time. During respiration, glucose and oxygen are converted into energy for work, carbon dioxide and water. Living things take in oxygen and give out carbon dioxide during respiration. When they breathe in oxygen, glucose is converted to energy used to do work. Limewater is used to test the presence. It will turn chalky when comes into contact with carbon dioxide. And remain clear if there is no presence of carbon dioxide.
Germination
Germination can only occur under certain conditions. These conditions include the availability of air, the presence of water and warmth. Without any one of these, the seed would not be able to germinate without any one of these conditions. However, at the germination stage, the plant would not require light since it does not make its own food and would get food from the seed leaves (cotyledons).
30
Conditions of habitat
Desert
The desert is very hot during the day and is very dry. Thus some animals have special adaptations to survive in such conditions. Some animals only come out during the night to avoid the high temperatures in the day. Others have adaptations to reduce water loss like the camel which sweats very little and give little urine. The fennec fox is another example as it has large ears to reduce heat gained. The most common plant there is the cactus. The cactus has needle-like leaves to reduce water loss through transpiration and it has a storage stem to store the water in its stem. It is very airy there and the temperature fluctuates from day to night.
Rotting log
The rotting log community always contains a rotting log as its name states and the log has to be in the process of decomposing, thus it is called the rotting log. The rotting log community must contain decomposers like the termite, fungus or bacteria to decompose the log. The decomposing log provides accommodation and food for the animals living in it. The rotting log is softened when it is decomposing thus easier for the organisms in it to digest it. The organisms that can be found there include the millipede, the centipede and spiders. The air there is quite stale.
Seaside
The seaside community contains sandy soil and can retain little water thus the plants there have to have roots that can absorb water fast enough for photosynthesis. The animals there include crabs, starfishes. It is well ventilated there and the temperature is very much the same there all the time.
31
Garden
The garden community is very common to most of as most of us have a garden. The garden community has garden soil that contains many dead organisms to be decomposed and be simplified into simple substances and return to the soil as nutrients for the plant. The soil there is thus the most optimum for the growth of the plants. The animals found there include butterflies, caterpillar and all types of animals that we usually see along the road. The air there is also very airy and the temperature is very much the same.
Pond
The pond community unlike other habitats has a lot of water and fishes live there. There are also many plants that live around or in the pond like the arrowhead, hydrilla and many others. Basically, these plants can be classified into three groups, floating, partially submerged and fully submerged. There are also many insects living around there, like the dragonfly nymph, the water spider and many others. The air there is very airy and the temperature maintains at around the same range.
Leaf litter
The leaf litter community is rather damp and stuffy. There is bound to be many trees around as the dead leaves would fall and create a heap, called the leaf litter community. The leaves are decomposing and many insects live in them and feed on them. The air there is stuffy and the area of the community is not very large.
Field Community
32
Pollutions
Pollutions
Pollutions occur when substances which can make the environment dirty or unhealthy are released into the environment.
Air pollution
33
Ozone is a thin layer of gas in the atmosphere which shields the earth from most of the harmful ultraviolet (UV) rays from the Sun. In the recent years, the ozone layer has been depleted by humans as they release chlorofluorocarbon (CFCs) into the environment.
Water Pollution
34
Acid rain
Acid rain often occurs when rainwater dissolves harmful gases in the air to form a weak acid.
Negative impacts Destruction of trees in the environment Organisms that live in the rivers or lakes are harmed. Our water supply is contaminated. Acid rain can react with stones and metals, causing buildings to corrode
Land Pollution
Biodegradable products are able to be broken down into simpler forms by decomposers and can be recycled in nature. Non-biodegradable products cannot be broken down by decomposers and will not decay.
35
Noise Pollution
Deforestation
Deforestation is the clearing of forest. This affects our environment a lot as the trees which take in the carbon dioxide that we breathe out and turns them into oxygen, are cut down. That causes the carbon dioxide and oxygen to be unbalanced. Then the carbon dioxide that we breathe out would be accumulated and there will be global warming. The water cycle is also affected by deforestation. Trees extract groundwater through their roots and release it into the atmosphere. When part of a forest is removed, the trees no longer evaporate away this water, resulting in a much drier climate. The cutting of tree prevents the trees from getting a grip on the soil and the will also is soil erosion.
36
Environment
Living organisms are also known as organisms. Organisms are often found in groups with other organisms of its same species. A population consists of all the organisms of the same kind that live and reproduce in a particular place. For example, all the duckweeds plant in pond is considered as a population. The population size is the total number of live organisms in a population. Adults and young must be when counting the population size. The place where a population lives is its habitat. A habitat provides the living thing with everything that it needs to stay alive. There are many different types of habitats, like forest, field, garden and many others. All these habitats are for various organisms. The living conditions are different habitats. Thus, the types of organisms found in different from the types of organisms found in another habitat. For example, many of the organisms that can live in the pond would not be able to live in the forest community. Populations of several kinds are interdependent on each other. They depend on each other for survival, or for competing with one another for food. The animals depend on the plants for food, shelter and oxygen. While the plants on the other hand, are dependent on animals for seed dispersal, pollination and nutrients. Populations living together in a habitat form a community together.
Pond Community
A pond community is aquatic. Aquatic means anything relate to water.
37
38
Cells
Cells are the smallest building block of life and can be large or small relative to a regular cell. Cells can also group together to form a larger organism, however, they can also live as individual organisms.
Cells structure
Plasma Membranes
The plasma membrane is a thin layer of semi-permeable covering of the cell made of protein and fats, that allows certain substances in and others out and it is very flexible and appears in most cells. It increases the surface area for absorption of nutrients and disposal of wastes, it also prevents larger molecules like starch and protein from leaving the cell so that certain substances can be prevented from leaving the cell. The cell membrane is also there to separate one cell from an adjacent cell.
Nucleus
The nucleus is the most prominent organelle in the cell and is the control center of the cell where all the commands are given out. It is usually spherical in shape and found near the center of the animal cell. It is bound by the nuclear membrane and isolates the genetic materials of the cell from there rest of the cell. The nuclear membrane has many perforations and it is scattered all over the nuclear membrane. In the cell, there is one or more of a small, spherical structure called nucleolus which is not bound by a membrane and is in charge or forming ribosome. There is also nucleoplasm in the cell that acts like cytoplasm and fills up the nucleus; it contains chromatin which is made up of DNA. The nucleus is involved in cell division and carries out instructions for protein synthesis. The nuclear pores on the membrane allow certain molecules to enter or leave the nucleus.
Cytoplasm
The cytoplasm is what fills up the cell apart from the organelles and is a median for cellular activities to occur. It is jelly-like and metabolism takes place.
Mitochondria
The mitochondria often appear in a rod or cylindrical shape. It is a permanent structure in the cell. It can also be said to be the power house of the cell and it is where aerobic respiration occurs to generate energy from the glucose molecules in the cell. It is involved in chemical energy conversion during metabolic activities of the cell.
39
Vacuole
Vacuoles are sacs filled with sap, a watery solution of sugar, salts, and pigments. These are the excess food stored in the cell after digestion. In plants, the vacuoles appear as one large section of the cell in the middle, however, in animal cells, they appear as tiny granules.
Ribosome
Ribosome is made up of two sub units that aids in protein synthesis and is the biological catalysts and makes reactions of metabolisms. Many types of cell have vast numbers of ribosome and they also construct a type of acid known as nucleic acid.
Endoplasmic Reticulum
The endoplasmic reticulum consists of a network of folded membranes, forming interconnected sheets, tubes or sacs. The structure originates from the outer membrane of the nucleus, to which they may stay attached to. The cytoplasm of metabolically active cells is usually packed with endoplasmic reticulum. There are two distinct types of endoplasmic reticulum, the rough ER (RER) and the smooth ER (SER). Smooth Endoplasmic Reticulum has no ribosomes attached to it and is the site of synthesis for substances needed by the cell. The SER is also responsible for the manufacturing of lipids. In the cytoplasm of voluntary muscle fibers, a special form of SER is at the site of storage of calcium ions which have an important role in the contraction of muscle fibers. Rough endoplasmic reticulum has ribosomes attached to it and vesicles are formed from swelling at the margins that get pinched off. A vesicle is a small spherical organelle bounded by a single membrane, which is used to store and transport substances around the cell. For example, RER is the site of synthesis for protein such as digestive enzymes. These are packaged in the vesicles and are discharged from the cells.
Golgi apparatus
The Golgi apparatus consists of a stack-like structure that is a collection of flattened membranous sacs. One side of the stack of membranes is formed by the fusion of membranes of vesicles from ER. At the opposite side of the stack, Vesicles are formed from swellings at the margins that become pinched off. The Golgi apparatus is present in all cells, but is especially prominent in metabolically active cells such as secretary cells. It is the site of synthesis for certain chemicals, including hormones and polysaccharide macromolecules, which are then
40
packages into vesicles. In animal cells these vesicles may form lysosome, while those in plant cells my contain polysaccharide for cell wall formation.
Lysosomes
Lysosomes are small spherical vesicles bound by a single membrane. They contain a concentrated mixture of hydrolytic enzymes, which are produced by either the Golgi apparatus or by the ER. Lysosomes are involved in the breakdown of contents of imported food vacuoles. An example might be a harmful bacterium that has invaded the body and been engulfed by one of the bodys defense cell. It is then broken down, and the products of digestion escape into the liquid of the cytoplasm. Lysosomes may also fuse with and digest any broken-down organelles in the cytoplasm. When an organism dies, the hydrolytic enzymes in the lysosome of the cells escape into the cytoplasm and cause self digestion.
Cell wall
The cell wall in plant cells is a firm and turgid layer of cellulose that gives the cell its shape and it does not interfere with the cell membranes work of regulating entry and exit of substances as the perforations in it is large enough for almost all substances to go through.
Chloroplast
In plant cells, there is another unique cell part, the chloropast which is the part in the cell that contains chlorophyll and trap sunlight to make food. Without the chloroplast, the plant cells would not appear green and would not be able to photosynthesize.
Division of Labour
Division of labour is needed since each cell has specified jobs and not any other cell is able to take over the job of a specified type of cell. For example, a cheek cell is definitely not able to replace a brain cell thus, cell specialization in the division of labor is very important. This allows multiple processes to go on concurrently.
41
substrate has a higher water potential than the average water potential in your cell, it is said that the substance is hypotonic and water moves into the cell and a plant cell would become turgid while an animal cell would lyse. When the substrate has an equal water potential as the average water potential in you cell, it is called isotonic and there is no net movement of water in and out of the cell. When the substance has a lower water potential than the average water potential in your cell, it is said that the substance is hypertonic and water would move out of the cell, causing it to be flaccid. Diffusion is quite the same thing as osmosis except that it involves a substance that can move and travel across in natural, for example, the diffusion of gas in the or air, or the diffusion of blue paint in a beaker of water. Diffusion is affected by many different factors like the temperature of the substance since it affects the movement of molecule, the thickness of the barrier separating the two substances and the size of the molecule these factors all can affect the rate of diffusion and osmosis.
42
Digestive System
The process of digestion
Mouth
The mouth is the place where digestion starts. The teeth start helping by chewing and tearing the food up into smaller pieces (mastication) so that digestion can occur over a larger surface area for enzyme reaction and digestion can happen faster. The tongue secretes enzyme amylase which helps to catalyse the digestion of starch into maltose in the food. It is also to soften the food. The tongue then rolls the chewed up food into a ball called bolus and it is rolled to the back of the tongue so that it can go down into the throat. The saliva also contains mucus that helps to make food more slippery and allows it to go down the esophagus more easily.
Gullet
The gullet or the esophagus is a passage way which connects the mouth to the stomach. The food from the mouth is pushed down this tube by peristalsis; this is the action of the muscles contracting and relaxing, pushing the ball of food down. This is an involuntary action. No chemical reaction occurs here apart from the digestion of starch into maltose. The gullet itself is just a long tube of muscles.
Stomach
The stomach is a muscular bag that contains hydrochloric acid and it is also where most of the digestion takes place. The food is kept in the stomach for about 2-4 hours and remains there until mostly digested. The food that has been churned by the stomach is called chime. Alcohol and glucose are also absorbed here. The hydrochloric acid in the stomach is highly acidic and thus the average pH of the stomach is about 2. This acidic environment allows many of the processes in the stomach to go on and also kills the bacteria in the food. The hydrochloric acid also helps to loosen the bonds in the meat, to render easy absorption of calcium and iron at a later stage in the process of digestion. Due to its acidic environment, the stomach has to secrete mucus in order to prevent the hydrochloric acid from digesting the walls of the stomach. In the stomach, various enzymes are secreted, pepsin, rennin and peptides. The pepsin aids in breaking down the protein into peptides and the rennin converts protein into insoluble curds for hydrolysis of pepsin. The pyloric sphincter controls the entry of food to the duodenum.
43
Liver
The liver is one of the crucial parts of the digestive system and it is where green bile that is needed for emulsification of fats is formed and sent to the gall bladder to be stored and transferred to the small intestine to emulsify the fats and allow a larger area for reaction of lipase, making it easier for the digestion of fats and lipids in the food.
Pancreas
The pancreas is one of the main secretor of alkaline enzymes in the digestive system. The pancreas is a feathery like structure that secretes enzymes like amylase, trypsin, lipase and even water as it helps in hydrolysis of food. It also secretes insulin to convert excess glucose to glycogen in the liver.
Small Intestine
The small intestine is where the final stages of digestion take place, it is also where bile is secreted into the digestive system, and the bile helps to emulsify the fats so that the digestion of fats into fatty acid and glycerol can occur at a faster rate. The pH here is relatively normal as it is pH7 since the pancreatic juice is alkaline and thus the hydrochloric acid from the stomach may be neutralized so that the acids in the pancreatic juice can be activated. In the duodenum, the last stages of digestion take place and are completed and the food moves on to the duodenum. Just to name a few of the reactions that occur, the peptides are digested into amino acids, lactose is digested into glucose and galactose, sucrose is digested into glucose and fructose and the maltose is digested into sucrose. In the ileum, the walls of the small intestine are covered with tiny protrusions called micro-villi. The villi are present to aid in the absorption of nutrients into the bloodstream as the surface area for absorption is increased and is more efficient. On the villi, there are millions of micro-villi, each villus has blood capillaries linked to the hepatic system and in the middle of the main villi, and there is the lacteal which is linked to the lymphatic system of the body. The fats and lipids are absorbed into the lacteal, into the lymphatic system to the liver. The other nutrients however, are absorbed into the blood capillaries and transported to all parts of the body.
44
Large Intestine
The large intestine is the alimentary canal and is mainly made up of the colon; the colon is the part where no enzyme activity takes place, however, water is absorbed from the food into the body The large intestine pushes the digested food through the large intestine by peristalsis. Since there are no chemical to neutralize the enzymes from the small intestine, the walls of the large intestine secretes mucus to prevent the enzymes from harming the walls of the large intestine.
45