Professional Documents
Culture Documents
Biodiesel Lab
Biodiesel Lab
Thompson
Biodiesel Synthesis
Chemical Concepts Reactions of carbonyl compounds; nucleophilic substitution and elimination reactions; transesterification; saponification; use of IR spectroscopy; use of a catalyst. Green Lessons This experiment demonstrates the use of vegetable oil as an alternative, renewable feedstock. The reaction incorporates NaOH as a catalyst in order to achieve high yield and minimize waste. In addition, the glycerol by-product can be reused in order to make glycerine soap. Introduction The United States is the largest single consumer of fossil fuels in the world. Each year, the U.S. consumes 125 billion gallons of gasoline and 60 billion gallons of diesel fuel. With current energy consumption, the desire to find alternative feedstocks for our energy needs is increasing. One such alternative feedstock is vegetable oil. Vegetable oil offers the benefits of a greener synthetic route for obtaining diesel fuel. This fuel source is commonly known as biodiesel, and can be synthesized on an individual level or on an industrial scale. The methods behind biodiesel synthesis have been known for quite a while. In recent years, however, there has been significant interest in the production of biodiesel from the waste oils of the food industry. Every year, fast food restaurants in the U.S. produce over 3 billion gallons of used cooking oil. Since many gallons of this used oil inevitably end up in landfills and sewers, the production of biodiesel from waste oil has the potential to significantly reduce environmental impact. In this experiment you will synthesize diesel fuel from a triester of glycerol (a triacylglycerol or triglyceride). This reaction is known as a transesterification reaction. Transesterification is the process of transforming one type of ester into another type of ester. This reaction incorporates the use of the strong base sodium methoxide in a base- catalysed nucleophilic addition-elimination reaction at the carbonyl carbon of the triglyceride. The overall mechanism is catalysed by the presence of NaOH. In the first step of the reaction, NaOH reacts with methanol in an acid-base reaction. The product of this reaction is the very strong base sodium methoxide and water. In the second step, the sodium methoxide acts as a nucleophile and attacks the three carbonyl carbons of the vegetable oil. This produces a tetrahedral intermediate that is highly unstable. The overall result is the "cracking" of the triglyceride. The elimination of the glycerol backbone leads to the formation of the three methyl esters (the biodiesel) and glycerol. The NaOH is reproduced as a product in the reaction. If the biodiesel is removed from the mixture, glycerol and unreacted NaOH and methanol remain. The glycerol can be converted to soap through a saponification reaction if excess NaOH is used. Care must be exercised When using excess NaOH, because using too much will produce a jelly like mix of glycerol and soap. The general reaction is as shown below.
(trigylceride molecule)
O H2C O
(biodiesel)
NaOH
CH O O R O C H2 O
3CH3OH
biodiesel lab
Thompson
Experimental Procedure Note: The following procedure is for synthesizing a biodiesel mini-batch from 100% pure unused vegetable oil. This method can easily be modified for using recycled, used vegetable oil. For more on this, see the endnotes. 1. Add 0.35 g of finely ground anhydrous NaOH into 20 mL of pure (99% or higher purity) methanol in a 250 mL Erlenmeyer flask containing a magnetic stir bar. Put the flask on a magnetic stir plate, and stir vigorously until all of the NaOH is dissolved. This flask now contains sodium methoxide. Note: Sodium methoxide is an extremely strong base and should be handled with care. 2. Warm up 100 mL of 100% pure vegetable oil to about 40C in a 250 mL beaker. Warming the oil up is not necessary, but increases the reaction rate. 3. When all of the NaOH is dissolved, pour the 100 mL of oil into the methoxide solution while continually stirring. At first the mixture will become cloudy, but should soon separate into two layers. Stir for 15-30 minutes on high. (Stop here if experiment is being done over 2 weeks.) 4. Transfer the contents of the flask into a 250 mL separatory funnel. The mixture will separate into two different layers. The glycerol will fall to the bottom, and the methyl ester (biodiesel) will float to the top. Since about 75% of the separation occurs within the first hour, you will be able to see immediate progress. Allow the experiment to sit for about an hour. 5. Open the stopcock of the separatory funnel and allow the glycerol to drain into a small beaker. Make sure not to get any biodiesel in the glycerol or glycerol in the biodiesel. 6. Use the IR spectrometer to identify your products. Print out the spectras and compare with known spectra. The biodiesel may be hard to compare, since most oils are comprised of different length carbon chains. Comparing to known spectra can easily identify the glycerol. The presence of glycerol indicates a successful reaction. Experiment Report For this experiment I would like you to create a summary report. The report should be a typed one-page narrative and should include: A brief summary of your experiment and results Analyze the quality and error of your experiment. Evaluate this experiment in terms of its greenness. o Give a brief overall analysis of the greenness of this reaction o What recommendations do you have to improve the green character of this reaction? Attach a copy of your IR (another copy should be taped in your notebook).
Name____________________
Biodiesel Synthesis
Pre-laboratory Questions 1. Most oils and fats contain palmitic and stearic acid as building blocks. Give the structure for both these compounds.
3. Complete the following tables of chemical data: Compound M.M. (g/mol) Sol. m.p. b.p. (C) (C) D (g/mL)
4. Consider the chemicals used for this experiment. What realistic hazards are present? What safety procedures are necessary beyond wearing goggles and gloves?
biodiesel lab