VHSto DVD3 User Guide
VHSto DVD3 User Guide
VHSto DVD3 User Guide
0 SE
User Guide
2.
honestech
3.
5. Limited Warranty a. Licensor does not warrant that the functions contained in the Licensed Product and Hardware will meet Licensees requirements or that the operation of the Software and Hardware will be uninterrupted or error-free. Licensor does warrant that the media on which the Software is furnished and the hardware will be free from defects in materials and workmanship under normal use for a period of thirty (30) days from the date of delivery (Warranty Period). This Limited Warranty is void of failure of the media on which the Software is furnished has resulted from accident, abuse, or misapplications. b. EXCEPT AS PROVIDED ABOVE, THE LICENSED PRODUCT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LICNESED PRODUCT AND HARDWARE IS WITH LICENSE. 6. Limitation of Liability a. Licensors sole obligation or liability and licensees exclusive remedy under this agreement shall be the replacement of the defective media on which the software is furnished and/or the hardware according to the limited warranty above. b. In no event will licensor be liable for any consequential, incidental or indirect damages including, without limitation, any loss of data or information, loss of profits, loss savings, business interruption or other pecuniary loss, arising out of use of or liability to use the software or documentation or any hardware, even if licensor has been advised of the possibility of such damages, or for any claim by any third party. 7. General a. Any Software and Hardware provided to Licensee by Licensor shall not be exported or reexported in violation of any export provisions of the United States or any other applicable jurisdiction. Any attempt to sublicense, assign or transfer any of the rights, duties or obligations hereunder is void. This Agreement shall be governed by and interpreted under the laws of the State of New Jersey, United States of America, without regard to its conflicts of law provisions. Licensor and Licensee agree that the U.N. Convention on Contracts for the International Sales of Goods shall not apply to this License Agreement. b. This License Agreement may only be modified or amended by a written license addendum that accompanies this License Agreement or by written document that has been signed by both you and Licensor. Site licenses and other types of enterprise licenses are available upon request. Pleas contact Licensor or your supplier for further information. c. Any controversy or claim arising out of or relating to this Agreement, or the breach of this Agreement, shall be settled by arbitration administered by the American Arbitration Association in accordance with its Commercial Arbitration Rules and Judgment upon the award rendered by the arbitrator may be entered in any court having jurisdiction thereof. The arbitration shall be held in New Jersey, United States of America. If you have any other questions concerning this License Agreement, or if you desire to contact Licensor for any reason, please contact Honest Technology. Copyright 2007~2009 Honest Technology Inc. All Rights reserved.
Some of the features stated in the Help or User Guide may not be available in this special edition limited version.
4.
honestech
Table of Contents
End User License Agreement........................................................................................... 2 Table of Contents............................................................................................................. 4 1. Introduction ................................................................................................................. 5 1.1. System Requirements .................................................................................... 6 2. Overview of steps ....................................................................................................... 7 3. Using honestech VHS to DVD 3.0 SE ......................................................................... 8 3.1. STEP 1 CAPTURE ....................................................................................... 9 3.2. STEP 2 EDIT.............................................................................................. 14 3.2.1. Editing in Storyboard ......................................................................... 15 3.2.2. Transition Effects ............................................................................... 16 3.2.3. Merge and Save ................................................................................ 19 3.3. STEP 3 BURN............................................................................................. 25 4. OUTPUT SPECIFICATION ....................................................................................... 28
5.
1. Introduction
Video tapes car deteriorate over time. Deteriorated videos will have color bleed, white specks, and other distortions. Dont let this happen to your precious memories, and archive your videotape collection onto DVD/CD. honestech VHS to DVD 3.0 SE offers the fastest and easiest way to do just that. Capture video from VCR, Digital Camcorder, PC camera, TV, DVD players and convert them into home DVD movies. All-in-one solution: provides everything you need to easily transfer your video onto VCD, SVCD, or DVD movies. Advanced scene editing tools: trim out unwanted scenes and add transition effects. Transition effects: many different screen effects and filters to create professional quality videos. Watch video on new gadgets: convert captured video into PSP or iPod formats.
Video input: Capture Device (VCR, Digital Camcorder, TV, DVD Player, etc) Video output: VCD, SVCD, DVD, Long DVD, WMV, MPEG-4 (PSP and iPod) honestech VHS to DVD 3.0 SE is revolutionary software that provides users with a complete and fully featured program for easy and simple conversion of their videos onto VCD, SVCD or DVD movies. Now you can save all your old home videos and burn them to DVD to keep your precious memories alive forever. You can also convert captured video into MPEG-4 or WMV format and watch them on your PSP, iPod, or Windows-based PDA device. honestech VHS to DVD 3.0 SE has three modes: 1) Easy Wizard Mode, 2) Advanced Mode, and 3) Audio Recorder. The Easy Wizard mode provides step-by-step pictorial instructions which assist the user through the process. The Advanced Mode simplifies capturing, editing and burning DVD/CD movies into a simple three-step process. 1. Capture: Capture your video from camcorder, VCR, or DVD player. 2. Edit: Trim unwanted scenes and add transition effects. 3. Burn: Burn your movie into DVD, VCD, or SVCD or convert the video into MPEG-4 or WMV format that you can watch on your PSP, iPod, or Windowsbased PDA device. The Audio Recorder records audio from from your cassettes, LP records, and video tapes to MP3 files. Using the recorded MP3 files, you can create audio CDs.
Whether youre a novice or professional, honestech VHS to DVD 3.0 SE is your best choice for editing and producing home movies on VCD, SVCD or DVD. honestech VHS to DVD 3.0 SE provides everything you need to easily produce DVD movies. honestech VHS to DVD 3.0 SE auto-detects capture devices on your PC and captures video from a wide variety of devices: TV, PC Camera, DVD Player, VCRs, Camcorders, etc.
6.
honestech
Whether you create Video CD, Super Video CD, DVD or mini-DVD, all of your home movies will play in a superb digital quality. Simply load the disc you have produced and play it on your home DVD player or PC. Sit back, relax and enjoy the show!
7.
2. Overview of steps
honestech VHS to DVD 3.0 SE allows you to converts analog videotapes to CD or DVD. You can create VCD/DVDs of TV programs, movies or videos from your camcorder in real time. The Edit function enables you to make beautiful titles with transition effects and cut and paste features. The Burning function enables you to save your video clips as DVD or VCD so that you can play them later using the player. Now you can make your own VCD/DVDs using honestech VHS to DVD 3.0 SE . honestech VHS to DVD 3.0 SE has three modes:
Step One Capture Capture video from your VCR, camcorder, or DVD player. appropriate format including DVD, VCD, or SVCD.
Select
Step Two Edit Trim out unwanted scenes from your videos and add transition effects to create professional quality videos. Step Three - Burn Create DVD, VCD, or SVCD with the videos that you have captured and edited. You can also convert the video into MPEG-4 or WMV format to watch it on your PSP, iPod, or Windows-based PDA device.
8.
honestech
9.
A new project will be created when you start honestech VHS to DVD 3.0 SE for the first time. You may choose to save your current project before you exit the program so that you can continue working on the project at another time.
Option Button
Select your input video device, audio device and the video output format.
10.
honestech
Using the drop-down menu shown above, you can select the video input device. honestech VHS to DVD 3.0 SE will detect and list all available video input devices. Video Device
Select the video device that you want to use from the list
Select input cable type for the video device you selected.
11.
Audio Device
Select the audio device that you want to use (Select USB Audio Device if you are using USB2.0 Capture Device).
Configure the settings of the selected audio device and adjust the volume (if allowed). Select the output file format from drop down menu. (VCD / SVCD / DVD / LongDVD / WMV)
Configure the settings of the selected video format. DVD, Long DVD
You can select the DVD/Long DVD Resolution ( 352*240(288) / 352*480(576) / 720*480(576) ). Long DVD format will allow you to record longer video on your writable DVD than the normal DVD format, but it will result in slightly lower video quality. Note : Selecting higher than the recommended resolution setting may result in dropped frames and poor video quality.
12.
honestech
WMV
Select video type (NTSC / PAL; * Select NTSC for North America).
Adjust the quality of the output file (Best / Good / Normal / Average). The higher quality will result in bigger file size, and the lower quality will allow you to burn longer video on your CD/DVD. Maximum recording time under each setting for DVD (This is an approximate calculation, and the result will vary depending on the video/audio type.) 1) Best: 1 hour and 10 minutes 2) Good: 1 hour and 30 minutes 3) Normal: 1 hour and 50 minutes 4) Average: 2 hours and 20 minutes
Split Size feature automatically splits the capture video file into two or more files if it would becomes too large to fit on a single DVD/CD. This is a great tool if you have many long videos that cannot fit on a single DVD/CD.
13.
When checked, the recording will be made for the duration of time you set, and DVD/CD burning will start automatically afterward. This option makes the whole process automatic.
This feature lets you know the maximum amount of video you can capture on your computer. The maximum recording time will depend on the output format and amount of hard drive space available. This is useful when you want to monitor and record activities at home while you are away for a short period of time (Few hours are ideal).
Set the duration of recording, and the recording will stop automatically after the duration you set. This is very useful if you know the length of the movie you are capturing. It is recommended that you always set the recording duration time to prevent the recording from continuing until it reaches the maximum recording time. You can always stop the recording manually before the recording duration time is reached.
Record Button
Stop Button
Click to stop the recording. The recorded video will be saved in the output folder.
Current State
Displays the recording status and the remaining time for the recording duration time or the maximum record time
14.
honestech
The above image is a screenshot of the Edit Window's Main Window. The Main Window consists of Player, Transition List, Storyboard panels and the File Pool. 1. Player Panel This panel has buttons for Play/Pause, Stop, Previous Frame, Next Frame, Cut Clip Start Point, and Cut Clip Endpoint functions. 2. Transition List Panel Transition allows you to add a video transition between the two clips, like a fade-in-fadeout effect. 3. Storyboard Panel The Storyboard panel displays clips in thumbnail format in time order. 4. File Pool The File Pool displays clips in thumbnail format that you have captured. In the EDIT phase, you can trim out unwanted scenes from your recorded video or split one video clip into multiple clips. You can add transition effects betweem clips or merge multiple clips into one video clip.
15.
3.2.1. Editing in Storyboard Editing video clips (or removing unwanted scenes). 1. 2. Play the video in the Play Panel (Double-click on the video clip to play). Position the scroll bar ( ) to the beginning of the segment that you want keep. You can also play the video and click on Start Edit Point ( ) button at the beginning of the section that you want to keep. Position the scroll bar ( ) to the ending of the segment that you want to keep. You can also play the video and click on End Edit Point ( ) button at the end of the segment that you want to keep. Click on ( ) to cut the file clip. The selected segment will be placed in the Storyboard. Click Merge & Save ( ) button to apply the changes and save the new file from the Storyboard. NOTE: When you edit a video clip and save, a new clip will be created. original file will remain unchanged. Your
3.
4. 5.
Merge multiple video clips and add transition effects between scenes. Addin a transition effect : 1) Select a transition box (between two clips).
16.
honestech
To change the duration of an image clip : 1) Select an image clip. 2) Right-click on the selected image clip to display a popup menu. 3) From the popup menu, select "Set photo duration..." 4) A window opens in which you can adjust the image duration time.
3.2.2. Transition Effects Various types of transition effects can be added in between the scenes (clips).
17.
Adding Transition Effects To add a transition effects: 1) Drag a transition effect of your choice to the transition box (between clips) in the Storyboard other to add the transition effect. 2) Once the transition has been added, the Transition Properties window will open to the right of the screen. Here you can set the direction, background color, and number of horizontal and vertical lines.
18.
honestech
Applying Transition Effects When you click on a Transition Box (in between the clips) in the Storyboard, the Transition Properties window opens as shown below. In the Transition Properties window, you can set the direction and background color of the transition. You can also preview your changes.
[Transition Properties window] 1. Preview Window : Provides immediate playback of the edited videos. 2. Direction : Set the direction of the transition. 3. Section Setup: You can adjust the section where the two clips overlap.
19.
3.2.3. Merge and Save This saves the contents edited in Storyboard into a file. Click button to merge the clips, apply the changes (editing), and save.
There are 3 output format options. - DVD/VCD (MPEG) Format - DV-AVI Format - Window Media (WMV) Format
20.
honestech
* Fast MPEG merge (GOP boundary cut) 1) Rendering Method : Fast MPEG merge All video clips must have identical MPEG formats. Makes inserting and deleting frames simple and fast. The output video format will match the original MPEG format. Customizing of video and audio settings is not possible; function property settings are made inactive. 2) Type : Displays MPEG format of file to be rendered. 3) Video 4) Audio -
Resolution: Video resolution (screen size). Frame Rate: Frames per second (fps). Bitrate: Number of data bits used per second (bps).
Sampling Rate: Sampling Frequency (KHz). Bitrate: Number of data bits used per second (bps).
* Smart Rendering 1) Rendering Method : Smart Rendering Encode a portion or the whole video. Only the edited segments of the original video will be encoded. If the entired movie clip was edited, the entire movie will be re-rendered. When movie clips with different video formats are combined, the format of the output file will be set to match the format of the "base video file". Movie clips with formats that don't match the "base video file" will be rerendered. Select the "base video file" using the button. Although the video settings cannot be changed, the audio settings can be changed. 2) Type : Display MPEG type 3) Video 4) Audio -
Resolution: Video resolution (screen size). Frame Rate: Frames per second (fps). Bitrate: Number of data bits used per second (bps).
Sampling Rate: Sampling Frequency (KHz). Bitrate: Number of data bits used per second (bps).
21.
* Full Rendering 1) Rendering Method: Full Rendering Renders the entire movie. This rendering option will take longer than the other rendering options. 2) Type : Select MPEG type Supports MPEG-1 (VCD) and MPEG-2 (SVCD and DVD). Both NTSC and PAL standards are supported. 3) Video 4) Audio Resolution: Video resolution (screen size). Frame Rate: Frames per second (fps). Bitrate: Number of data bits used per second (bps). Sampling Rate: Sampling Frequency (KHz). Bitrate: Number of data bits used per second (bps).
1) Interlace encoding mode: Encodes each frame by separating the field units into even numbered line fields and odd numbered line fields. You can improve screen quality using this option when horizontal lines appear in the input source screen. When the Interlace Encoding Mode is set, an MPEG file whose frame type is interlaced is created. This option is available only in MPEG2. 2) De-interlace: Removes the horizontal lines on the screen entered in the frame unit before encoding. If you select the Interlace Encoding Mode above, you dont have to use this option. In addition, if you select De-interlace, you can obtain a good quality MPEG file without using the Interlace Encoding Mode. Interlace Encoding Mode and De-Interlace are very effective when converting DV-AVI files created by Camcorders into MPEG files.
22.
honestech
* Smart Rendering (honestech's intelligent method of encoding edited segments of an original streaming video) Encode a portion or the whole video. Only the edited segments of the original video will be encoded. If the entired movie clip was edited, the entire movie will be re-rendered. When movie clips with different video formats are combined, the format of the output file will be set to match the format of the "base video file". Movie clips with formats that don't match the "base video file" will be rerendered. Although the video settings cannot be changed, the audio settings can be changed.
* DV-AVI Type - Type 1 : Video file in Digital Video format. 1) Native video format in digital camcorder. 2) Video and audio are in the same stream. 3) Requires a splitter to divide video and audio.
23.
- Type 2 : Video file in general AVI format. 1) Video is compressed in DV format. 2) Video and audio are in separate streams. 3) Must be converted back to type 1 to be transferred to a digital camcorder.
* Video resolution : Select NTSC or PAL. NTSC: 720 x 480 resolution PAL: 720x 576 resolution
Saving Windows Media(WMV) File Select a CODEC from the Profile Index. Displays the CODEC's setting.
* Profile : The profile includes the audio and video codec, output video size, audio sample rate, bitrate , etc. You can select a video codec and an audio codec of your choice and create your own custom profile by using Profile Generator of Windows Media Encoder .
24.
honestech
To output using your own custom profile, 1) Check [Use Custom Profile]. 2) Click on [Import] button, and import your custom profile.. 3) You can modify bitrate, audio codec, and audio format (however, this value cannot be save in the the imported profile.). 4) Click [OK] button to create an output in WMV format. For more information of making a custom profile, please refer to the manual provided by Windows Media Encoder. * Audio Video: Supports both NTSC and PAL standards (NTSC is used in North America and PAL in Europe). Resolution: Video resolution (screen size). Frame Rate: Frames per second (fps). Bitrate: Number of data bits used per second (bps).
Sampling Rate: Sampling Frequency (KHz). Bitrate: Number of data bits used per second (bps). Stereo: Audio presentation type (Stereo or Mono)
Contact Microsoft(R) for more information on the settings and uses of Windows Media Format (Video/Audio CODEC). All rights to Microsoft CODECs belong to Microsoft(R).
25.
Select output format : Select your output format (DVD/Long DVD/VCD/SVCD/Data CD/ Data DVD).
: Remove files.
26.
honestech
Chapters
: Add chapters
Page navigation
: Previous Page
Next Page.
Create menu page Check this option to add a menu to the DVD.
Disc management
27.
Burn disc
* Option
- Record to media Disc name : Enter disc name Drive : Select a DVD writer Write Speed : Select disc writing speed. - Create DVD folder Create DVD video folder (VIDEO_TS) and select a folder where you want to save the DVD video folder. - Create UDI Select a folder where disc image file will be stored. - Temp Folder Select temp folder where the temporary files/folders will be stored.
28.
honestech
4. OUTPUT SPECIFICATION
DVD (Digital Versatile Disk) Spec
NTSC Size: MPEG-2 720 X 480 pixels Video bitrate: Up to 9.8 Mbit/sec Frame rate: 29.97 frames/sec Audio: MPEG-1 Layer2 PAL Size: MPEG-2 720 X 576 pixels Video bitrate: Up to 9.8 Mbit/sec Frame rate: 25.00 frames/sec Audio: MPEG-1 Layer2
29.
Long DVD
NTSC Size : MPEG2 720 X 480 pixels Video bitrate : Up to 2.5 Mbit/sec Frame rate : 29.97 frames/sec Audio : MPEG-1 Layer2 PAL Size : MPEG2 720 X 576 pixels Video bitrate : Up to 2.5 Mbit/sec Frame rate : 25.00 frames/sec Audio : MPEG-1 Layer2
WMV
NTSC Size : Windows Media Video 9 352 X 240 pixels Video bitrate : 240 ~760 kbit/sec Frame rate : 29.97 frames/sec Audio : Windows Media Audio 9 (44.1Khz ,stereo) PAL Size : Windows Media Video 9 352 X 288 pixels Video bitrate : 240 ~760 kbit/sec Frame rate : 25.00 frames/sec Audio : Windows Media Audio 9 (44.1Khz ,stereo)