Professional Documents
Culture Documents
A o Smith Water Heaters
A o Smith Water Heaters
Residential
All A. O. Smith residential water heaters meet or exceed Federal Energy Efciency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992. They also comply with the current edition of ICC Codes and the HUD Standards. Gas models meet American National Standards Institute Standards (ANSI Z21.10.1 - CSA 4.1) governing storage-type water heaters. Electric models are UL listed according to safety specications outlined in Underwriters Laboratories, Inc. Standards for Safety (UL 174).
WATER HEATERS
ENERGY STAR
A. O. Smith offers a variety of models that are ENERGY STAR qualied. Learn more at www.energystar.gov
FAMILY SIZE
2 People 3 People 4 People 5 People 6 People 7 or More People
HEAT PUMP MODELS Electric Heat Pump Water Heaters operate at peak-efciency when sized to allow slower reheating of water. For this reason, dene water heating sizing based on High Demand criteria when determining First Hour Rating for an electric heat pump water heater. ON-DEMAND MODELS
Ground water temperature factor.
The temperature of incoming ground water (cold water inlet temperature) varies greatly throughout the U.S. and also fluctuates with change of season. The temperature of water as it enters the water heater will determine the amount of temperature rise required to achieve the desired hot water outlet temperature (120F is recommended).
Average Ground Water Temperatures
The best way to measure your incoming ground water temperature is to use a thermometer to measure cold water teamerature during the coldest season of the year. To simplify the process, use this map to determine whether your installation location is in the Southern Zone, Central Zone or Northern Zone.
Remember, these are general recommendations. Your A. O. Smith Water Heater Specialist can review your familys needs in even greater detail to make sure the model you choose will always provide enough hot water to meet the demand.
90% Thermal efciency First Hour Delivery of 189 gallons User-friendly LCD display with temperature control and diagnostics Easy installation Power vent design Condensing design allows for PVC, CPVC or ABS pipe for venting
MODEL NUMBER
VENT CONNECTION
HYB-90N
189
121
100,000
NAT
4.2
1.05
120/60
2.5
47-1/3
23-3/4
32
2 or 3
*Available in natural gas only Inlet and outlet connections: 3/4 male Circulation loop connections: 3/4 female
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
ResidentialGas Residential
Vertex Power Vent
Family-Friendly Hot Water, Earth-Friendly Efciency
Through an inspired blend of innovation, efciency and years of industry expertise, A. O. Smith has created a state-of-the-art product that provides a long-lasting supply of hot water during those times when everyone in your home needs it most. Simply put, Vertex delivers.
I
Fullls homeowners needs during peak demand periods 90% Thermal efciency Fully submerged coil heat exchanger maximizes heat transfer Advanced electronic gas control Easy installation Versatile power vent design 127-gallon rst hour delivery
I I
92-gallon recovery @ 90F rise Recirculating side taps for combination systems Two heavy-duty commercialgrade anodes for better protection against corrosion Intelli-Vent gas control for more precise water temperature control
I I
I I I I
96% Thermal efciency Models qualify for Federal Tax Credit up to $1,500 Vents up to 120 feet using PVC, CPVC or ABS pipe. Canadian installations require ULC S636 approved PVC or CPVC pipe for venting. Advanced electronic diagnostics control
I
iComm compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
I I I I
164-gallon rst hour delivery 129-gallon recovery @ 90F rise Top-red low-NOx burner complies with ultra-low NOx standards Available in Propane (LP) gas
MODEL NUMBER FIRST HOUR DELIVERY GALLONS GALLON CAPACITY BTU INPUT PER HOUR RECOVERY 90F RISE GALLONS DIMENSIONS IN INCHES HEIGHT DIAMETER
GPHE-50* GDHE-50
127 164
50 50
76,000 100,000
92 129
70-5/8 66-3/4
22 22
*Available in natural gas only Inlet and outlet connections: 3/4 male Circulation loop connections: 3/4 female
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
.70 Energy Factor Powered Anode LCD User Interface Electronic Ignition
I I I
MODEL NUMBER
SERIES
GALLON CAPACITY
ENERGY FACTOR
GAHH-40 GAHH-50
102 100
70 81
40 50
.70 .70
40,000 40,000
43 43
2 2
61-3/4 60-5/8
20 22
3 or 4 3 or 4
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Residential Gas
Conservationist
I
Standard Vent
Highest energy factors 2 Inch Environmentally-Friendly non-CFC foam insulation reduces standby heat loss, includes external traps DynaClean II automatic sedimentcleaning system creates turbulence in tank for maximum protection against lime and sediment buildup Blue Diamond Glass Coating Provides superior corrosion resistance compared to industry-standard glass lining Flammable Vapor Ignition Resistant FVIR System 40,000 BTU input on all models delivers high rst hour ratings and recoveries Advanced PEX cross-linked polymer dip tube lasts longer than standard polymer dip tubes
MODEL NUMBER FIRST HOUR RATING GALLONS ENERGY FACTOR GALLON CAPACITY BTU INPUT PER HOUR NATURAL RECOVERY 90F RISE GALLONS HEIGHT* DIMENSIONS IN INCHES DRAFT HOOD DIAMETER OUTLET
Heat trap nipples reduce heat loss through outlet and inlet water connections (3/4 male) Our best CoreGard magnesium anode rod with stainless steel core provides added protection against tank corrosion Piezo ignitor for easy, no-match pilot ignition
Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners
CSA Certied and ASME Rated T&P relief valve Tamper-resistant brass drain valve
Series 200/201
TALL MODELS
XGV-40 XGV-50
70 88
.63 .62
40 50
40,000 40,000
41 41
61-3/4 61
20 22
3 or 4 3 or 4
Enhanced Ultra-low NOx burner complies with the Air Quality Management District requirements for NOx emissions of less than 10ng/j. FVIR technology with ame arrestor that provides smooth ignition and safely combusts ammable vapors inside the sealed chamber DynaClean diffuser dip tube helps reduce lime and sediment buildup and PermaGlas glass coating protects tank from corrosion
MODEL NUMBER FIRST HOUR RATING GALLONS ENERGY FACTOR GALLON CAPACITY
Exclusive CoreGard anode rod, made of aluminum with stainless steel core, protects against corrosion Enhanced Green Choice gas burner made of inconel alloy and stainless steel for long life and safety Easily replaces existing heaters, no special venting or electrical power needed Covered by a 6-year tank and parts limited warranty
RECOVERY 90F RISE GALLONS DIMENSIONS IN INCHES HEIGHT* DIAMETER VENT OPT.
50 65 75 70 75
30 40 50 40 50
31 41 41 41 41
16 18 20 20 22
3 or 4 3 or 4 3 or 4 3 or 4 3 or 4
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
The 100/101 series of ProMax water heaters are being redesigned to 200/201 series. Please see www.hotwater.com for the most current specication information available.
Highest recoveries and rst hour ratings capacity/input combinations up to 98 gallons/75,100 BTU produce recoveries up to 81 gallons per hour, with deliverable hot water up to 150 gallons in the rst hour Flammable Vapor Ignition Resistant FVIR System DynaClean diffuser dip tube reduces lime and sediment buildup Advanced PEX cross-linked polymer dip tube lasts longer than standard polymer dip tubes Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners
Piezo ignitor on FVIR-compliant models for easy, no-match pilot ignition CoreGard aluminum anode rod with stainless steel core provides added protection against tank corrosion CSA Certied and ASME Rated T&P relief valve Tamper-resistant brass drain valve 6-year warranty on tank and parts 8-year extended warranty available on 30, 40 and 50-gallon models
I I I
High efciency models meet the Federal Energy Efciency and Standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA90.1. Flammable Vapor Ignition Resistant FVIR System 2 Inch Environmentally-Friendly non-CFC foam insulation reduces standby heat loss Energy-saving external heat traps DynaClean diffuser dip tube reduces lime and sediment buildup Advanced PEX cross-linked polymer dip tube lasts longer than standard polymer dip tubes
Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners Piezo ignitor on FVIR-compliant models for easy, no - match pilot ignition CoreGard aluminum anode rod with stainless steel core provides added protection against tank corrosion
I I
I I I
MODEL NUMBER
SERIES
ENERGY FACTOR
GALLON CAPACITY
HEIGHT*
GCVT-40
200/201 100/101 100/101 100/101 300/301 300/301 200/201 200/201 200/201 200/201
.60 .58 .58 .57 N/A N/A .62 .62 .62 .62
40 48 50 65 74 98 30 40 40 50
50,000 50,000 65,000 65,000 75,100 75,100 35,500 40,000 40,000 40,000
51 51 67 67 81 81 36 41 41 41
20 20 22 24 26-1/2 27-3/4 18 20 22 22
4 4 4 4 4 4 3 or 4 3 or 4 3 or 4 3 or 4
HIGH RECOVERY
HIGH EFFICIENCY
*Height to top of draft hood. **Not equipped with FVIR. For 10-year tank warranty, change G to X in model number ( XCVT-40). On 75-gallon and 100-gallon models, change F to P in model number (PCG-75).
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Residential Gas
The 100/101 series of ProMax water heaters are being redesigned to 200/201 series. Please see www.hotwater.com for the most current specication information available.
ProMax
I
Flammable Vapor Ignition Resistant (FVIR) System DynaClean diffuser dip tube reduces lime and sediment buildup Advanced PEX cross-linked polymer dip tube lasts longer than standard polymer dip tubes Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners Piezo ignitor on FVIR-compliant models for easy, no-match pilot ignition
SERIES NUMBER FIRST HOUR RATING GALLONS ENERGY FACTOR GALLON CAPACITY BTU INPUT PER HOUR NATURAL
CoreGard aluminum anode rod with stainless steel core provides added protection against tank corrosion Tamper-resistant brass drain valve
I I
I I
MODEL NUMBER
HEIGHT*
67 70 88 60 70 80
30 40 50 30 40 50
36 41 41 36 41 41
16 18 20 18 20 24
3 or 4 3 or 4 3 or 4 3 or 4 3 or 4 3 or 4
*Height to top of draft hood. For 10-year tank warranty, change G to X in model number ( XCV-30).
All models meet HUD requirements for manufactured housing installation Available in standard-vent or direct-vent design Convertible gas control for natural gas or propane gas operation Side-mounted cold water inlet, top-mounted hot water outlet Roof jack kits available for direct-vent models, with intake air and exhaust vents Atmospheric models are FVIR-compliant
MODEL NUMBER SERIES NUMBER FIRST HOUR RATING GALLONS ENERGY FACTOR GALLON CAPACITY
Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners Aluminum anode rod helps protect against tank corrosion External heat traps
I I
HEIGHT*
62 57 54 64 77
30 40 30 40 50
36 41 31 33 39
16 18 18 20 22
3 or 4 3 or 4 -
FMV Shown
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
10
Specialty Vent
Specialty vent gas water heaters are an alternative to standard metal vent water heaters. They provide venting exibility in replacement applications and offer useful choices for location of gas water heaters in new homes. Specialty-vent benets include: Flexible Installation Horizontal venting options allow tremendous exibility for placement of the water heater in the home. A. O. Smiths ProMax power vent and power direct vent models offer various venting options and use inexpensive PVC, CPVC or ABS pipe. See specication sheets for venting distances. Direct-venting for proper combustion Insufcient indoor ventilation can deprive a gas water heater of enough air for proper operation. The power direct-vent and direct-vent water heaters have two-pipe systems that vent to and draw air from outside the home, eliminating concerns about indoor ventilation.
Two-pipe closed combustion system permits combined horizontal and vertical venting and air intake runs up to 45 feet (including one 90 elbow) Vents up to 120 feet using PVC, CPVC or ABS pipe. Canadian installations require ULC S636 approved PVC or CPVC pipe for venting. Quiet modular blower, with 110V/120V electrical system (rating 3 amps or less), with 6-foot cord, standard 3-prong male connector Advanced Intelli-Vent gas control valve with silicon nitride hot surface ignitor Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners
MODEL NUMBER FIRST HOUR RATING GALLONS ENERGY FACTOR GALLON CAPACITY
FVIR Compliant and meets Phase III of the ANSI Z21.10.1 - CSA Standards 4.1 Heat trap nipples installed (3/4 male connection) CoreGard aluminum anode rod with stainless steel core provides added protection against tank corrosion CSA Certied and ASME Rated T&P relief valve Tamper-resistant brass drain 6-year warranty on tank and parts 10-year extended Stage II warranty kits available on all models
I I I
70 87 105 130
40 50 50 75
41 41 64 72
57 66 69-1/2 71-1/2
21 21 21 26-1/4
3 3 3 3
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
11
Residential Gas
40 and 50-gallon residential gas water heaters equipped with FVIR design Meets Phase II of the ANSI Z21.10.1 - CSA Standards 4.1 for Flammable Vapor Ignition Resistance (FVIR) Vents using PVC, CPVC or ABS pipe. Canadian installations require ULC S636 approved PVC or CPVC pipe for venting Equipped with a nearly indestructible silicon nitride hot surface ignitorno standing pilot Exclusive Power Vent blower specically designed and manufactured by A. O. Smith Exclusive A. O. Smith CoreGard aluminum anode rod with stainless steel core protects tank against corrosion 6-year limited warranty on tank and parts 10-year extended warranty kits available on all models (excludes GPS-75)
I I
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
R VALUE**
69 83 70 83 80 83 114 N/A
40 50 40 50 40 50 50 74
44 44 44 44 53 53 66 86
8 8 16 16 16 16 16 12
63 65 63 65 63 65 65 66
2, 3 or 4 2, 3 or 4 2, 3 or 4 2, 3 or 4 2, 3 or 4 2, 3 or 4 3 or 4 3 or 4
Propane Inputs: GPVH-40, GPVH-50, GPVR-40, GPVR-50: 40,000 BTU, GPVT-40-50,000 BTU, GPVX-50: 55,000 BTU, GPS-75: 80,000 BTU * 74-gallon model is not FVIR construction ** R8=1, R12=1-1/2 and R16=2 foam capacity Models with .67 EF are ENERGY STAR Qualied
12
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
One-pipe/dual-channel system permits horizontal venting and air intake on all models up to 80 (inches) from outside wall No electrical power needed Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners Heat trap nipples installed (3/4 male connection) Piezo ignitor CoreGard magnesium anode rod with stainless steel core provides added protection against tank corrosion
I I
I I
I I I
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
73 87 88 131
40 50 50 75
41 45 55 60
68 76 76 76
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
13
Residential Gas
ProMax SL
Tamper-resistant brass drain valve High-temperature DynaClean diffuser dip tube reduces lime and sediment buildup Eco-Friendly Green Choice gas burner reduces NOx emissions by 33% compared to standard burners
I I I
Standard Vent
I
Standard models (equipped with advanced DynaClean automatic sediment cleaning system)
All ProMax SL water heaters are equipped with side-mounted recirculating taps.
I I
MODEL NUMBER
SERIES NUMBER
ENERGY FACTOR
GALLON CAPACITY
HEIGHT*
70 75 90 93 116 N/A
40 40 48 50 65 74
41 51 51 67 67 81
18 20 20 22 24 26-1/2
3 or 4 4 4 4 4 4
14
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Dual-channel vent system draws combustion air from outside, vents to outside the home No electrical power required
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
73 88 131
40 50 75
41 55 60
68 76 76
40 and 50-gallon residential gas water heaters are designed to meet Phase II of the ANSI Z21.10.1-CSA 4.1 Standards for Flammable Vapor Ignition Resistance (FVIR) Vents using PVC, CPVC or ABS pipe. Canadian installations require ULC S636 approved PVC or CPVC pipe for venting. Equipped with a nearly indestructible silicon nitride hot surface ignitorno standing pilot Exclusive Power-Vent blower specically designed and manufactured by A. O. Smith Exclusive A. O. Smith CoreGard aluminum anode rod with stainless steel core protects tank against corrosion 6-year limited warranty on tank and parts
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
80 83 114 N/A
40 50 50 74
53 53 65 86
63 65 65 66
20-1/2 22 22 25-1/2
2, 3 or 4 2, 3 or 4 3 or 4 3 or 4
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
15
Residential Gas
Closed-combustion two-pipe system draws combustion air from outside, vents to outside the home Vents using PVC, CPVC or ABS pipe. Canadian installations require ULC S636 approved PVC or CPVC pipe for venting Quiet modular blower with 6-foot cord, standard 3-prong plug Advanced Intelli-Vent gas control valve with silicon nitride hot surface ignitor Dual anode rods on 40 and 50-gallon models Heat trap nipples standard on all models Equipped with FVIR technology to meet Phase III of the ANSI Z21.10.1 - CSA Standards 4.1
I I I I I
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
70 105 130
40 50 75
41 64 72
57 69-1/2 71-1/2
21 21 26-1/4
3 3 3
16
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Innovation On-Demand
A. O. Smiths complete line of tankless gas water heaters
Trust the innovation leader to give you more choices in on-demand water heating. A. O. Smith tankless water heaters provide endless hot water when sized appropriately for your homes needs with high efciency that saves money on both residential and commercial applications.
305 Models Series 200/201
Innovative Technology
I I I I I I
Indoor and outdoor installation options Continuous hot water on demand (up to 9.8 GPM) Whole house water heating solution Digital temperature controller +/-2F included Direct electronic ignitionno pilot light On-board diagnostics and safety monitoring
Excellent Performance
I I
12-year limited warranty on heat exchanger, 5-year warranty on all parts Can be installed outdoors, saving valuable indoor square footage
Energy Efciency
I I
Up to 84% thermal efciency providing signicant energy cost savings Models qualify for Federal Tax Credit up to $1,500
Sleek Design
I 705 Models I
Smooth pleasant lines and rounded corners Matching pipe cover available
MODEL NUMBER
SERIES
EF RATING
INDOOR MODELS ATI-305N ATI-505N ATI-705N 200/201 200/201 100/101 15,000 15,000 19,000 19,000 15,000 15,000 19,000 19,000 180,000 199,000/190,000 237,000 237,000 180,000 199,000 237,000 237,000 0.82 0.82 N/A N/A 0.82 0.82 N/A N/A 7.5 9.4 9.8 9.8 7.5 9.4 9.8 6.6 7.4/7.1 8.8 8.8 6.6 7.4 8.7 4.3 4.7 5.7 5.7 4.3 4.7 5.7 50 50 55 55 46 46 55
ATI-705AN* 100/101 OUTDOOR MODELS ATO-305N ATO-505N ATO-705N 200/201 200/201 100/101
ATO-705AN* 100/101
For propane, change N to P in model number(ATI-305P). 305 (Series 200/201) and all 505 Models are ENERGY STAR Qualied.
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
17
ENERGY STAR Qualified for Federal Tax Credit (State and Local Utility Rebates May Apply as Well) Energy Saving Heat Pump Technology Can Reduce Electricity Costs by 50% or More Increased Storage Allows Heat Pump to Operate More Frequently, Boosting Savings Environmentally-Friendly R134a Refrigerant Multiple Operating Modes to Optimize Savings & Performance User-Friendly LCD Touch Pad Control with plain English text and intuitive status icons provides easy interaction Water Temperature Set Point Range 95F to 150F (35C to 66C), with Child Resistant Safety Lock Advanced Diagnostics convey error messages in plain English Stores Last Four Error Messages Maintenance Free Powered Anode protects the tank from corrosion in any water conditions Easy-to-Remove, Washable Air Filter Long Lasting Incoloy Backup Heating Elements 2 Inch Environmentally-Friendly Non-CFC Foam Insulation reduces standby heat loss 10-Year Limited Tank and Parts Warranty
I I I I I
I I I I I
MODEL NUMBER
GALLON CAPACITY
STANDARD VOLTAGE
NO. OF ELEMENTS
HEIGHT (INCHES)
DIAMETER (INCHES)
PHPT-60 PHPT-80
60 80
2.40 2.30
2.33 2.33
.88 .85
51 70
68 84
66 76
240 240
2 2
4500/2000 4500/2000
67 1/3 81 1/2
24 1/2 24 1/2
18
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Conservationist
The top-of-the-line Conservationist electric water heater is fully loaded with all A. O. Smiths leading innovations. For consumers looking for maximum energy savings and excellent output, the Conservationist is the model of choice.
I I
Highest Energy Factors make the Conservationist qualied for utility rebates Our most efcient electric models, for maximum savings on operating costs with 3 Inch Environmentally-Friendly Non-CFC foam insulation to reduce standby heat loss Factory-installed heat trap nipples (3/4 male connection) for installation ease and to reduce standby heat loss Blue Diamond Glass Coating Provides superior corrosion resistance compared to industrystandard glass lining 4500W Phoenix low-watt density Incoloy steel upper and lower heating elements designed to operate more efciently and last 2-3 times longer than standard copper elements Tamper-resistant brass drain valve CSA Certied and ASME rated T&P relief valve Extra warranty protection 10 years on the tank and parts
I I I
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
TALL MODELS PXHT-40 PXHT-52 PXHT-66 PXHT-80 SHORT MODELS PXHS-40 PXHS-50 52 62 .95 .95 40 50 4500 4500 5500 5500 47 50 22-1/2 24 56 60 72 81 .95 .95 .95 .95 40 50 66 80 4500 4500 4500 4500 5500 5500 5500 5500 60-1/2 57 62 62 20 22-1/2 24 26
Water connections: 3/4 male NPT on all models. Top-mounted T&P valve not available.
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
19
Residential Electric
Meets energy-efciency requirements for most electric utility programs, ENERGY STAR Home Program recommendations and meets the standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1 2-1/2 Inch Environmentally-Friendly Non-CFC foam insulation reduces standby heat loss Energy-saving external heat traps (3/4 male connection) installed DynaClean diffuser dip tube reduces lime and sediment buildup, maximizes tank life Durable, tamper-resistant brass drain valve CSA Certied and ASME rated T&P relief valve 6-year warranty on tank and parts, 10-year tank warranty available on all models 8-year and 10-year extended warranties available on 40 through 80-gallon models
I I I I I I I
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
TALL MODELS ECRT-40 ECRT-52* ECRT-66 ECRT-80* SHORT MODELS ECRS-50 62 .93 50 4500 6000 49 23 54 60 76 87 .93 .93 .92 .93 40 50 66 80 4500 4500 4500 4500 6000 6000 6000 6000 60 56-1/2 61 61-1/2 19 21-1/2 23 25
For 10-year tank warranty, change E to P in model number (PCRT40). *Models not available with top T&P.
16
20
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
ProMax
A terric value for homes that need an economical water heater that will perform exceptionally well for years.
I I I I I I I I
Tall, Short and Lowboy (top connect) models available Thick, Environmentally-Friendly Non-CFC foam insulation reduces standby heat loss DynaClean diffuser dip tube reduces lime and sediment buildup Durable, tamper-resistant brass drain valve CSA Certied and ASME rated T&P relief valve Factory-installed heat trap nipples (3/4 male connection) 6-year warranty on tank and parts,10-year tank warranty available on all models 8-year and 10-year extended warranty available on 30-through 120-gallon models
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
TALL MODELS ECT-30 ECT-40 ECT-52 ECT-55 ECT-66 ECT-80 ECT-120 SHORT MODELS ECS-30 ECS-40 ECS-50 LOWBOY MODELS ECL-30 ECLN-40 ECL-50 41 48 55 .93 .92 .91 30 38 50 4500 4500 4500 6000 6000 6000 30 31-1/2 34 22 23 26-1/2 43 52 62 .93 .92 .90 30 40 50 4500 4500 4500 6000 6000 6000 36-1/2 44 48 20-1/2 20-1/2 22 43 52 60 67 72 81 112 .93 .92 .91 .90 .88 .86 .81 30 40 50 55 66 80 119 4500 4500 4500 4500 4500 4500 4500 6000 6000 6000 6000 6000 6000 6000 46-1/2 59-1/2 54 60-1/4 60-1/4 60 64-1/4 18 18 20-1/2 20-1/2 22 22-1/2 28
For 10-year tank warranty, change E to P in model number (PCT-40). PCLN-40 and PCL-50 are not available with top T&P. All water connections are 3/4 NPT.
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
21
Residential Electric
To make the most out of limited space or deliver small amounts of hot water for small-demand applications, A. O. Smith offers four ProMax Specialty choices. 6-year tank and parts warranty on all models.
I
Compact DesignsFeature side-mounted plumbing and electrical connections with factory-installed nipples as well as convenient plugged top plumbing connection for versatility. Available in 6- through 20-gallon capacity with a single heating element. Lowboy Side ConnectCompact design, with side-mounted plumbing and electrical connections, for installation under a counter or in other tight spaces. Single heating element. Point-of-UseDesigned for low-demand, point-of-use applications such as ofce lavatories or buildings with remote restrooms. 2 1/2-gallon capacity, equipped with single heating element and 110V/120V cord set with 3-prong plug. Includes integrated wall-mounted bracket for easy installation and top-plumbed for conned installations.
Lowboy/Compact
Point-of-Use
MODEL NUMBER
ENERGY FACTOR
GALLON CAPACITY
R VALUE
TABLE TOP MODELS ESTT-30 ESTT-40 COMPACT MODELS EJC-6 EJC-10 EJCS-20 EJCT-20 ECJ-30 ECJN-40 EJC-2 N/A N/A N/A N/A 37 43 N/A N/A N/A N/A N/A .93 .92 N/A 6 10 19 19.9 30 38 2.5 42 52 .89 .88 27 40
240V 4500 4500 120V 1650 1650 2500 2500 240V 4500 4500 120V 1500
240V 6000 6000 240V 3000 6000 6000 6000 240V 6000 6000 120V 1500 7 8 13-3/4* 13-3/4 11 21 21 16 12 30 31-1/2 22 23 22-3/4 25-5/8 8 8 11 11 8 8 8 8 15-1/4 18-1/4 24-3/4 31-5/8 14-1/4 16 18 16 10-3/4 12-1/4 15-5/8 25-3/4 21 21 12 12 36 36 21 24 25 25
POINT-OF-USE MODELS
Depth dimension is oor to T&P Valve and oor to hot water outlet. Dimension from oor to cold water inlet on all lowboy side-connect models is 3-1/2. Point-of-Use models have 1/2 inlet and outlet connections. * Height is to top of case. Add 2-3/4 to allow for T&P valve.
22
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Provides up to 70% of Energy Needs for Water Heating Cost-Free 2.5 to 4.0 Solar Energy Factor (SEF) Ratings Eligible for Federal Tax Credit for up to 30% of Total Installed Cost (no cap) Complete System Package that Includes: Solar Collectors, Booster Tank, Integrated Pump Station, Solar Loop Expansion Tank, Temperature Sensors, Auto Air Vent, Propylene Gycol, Roof Flashings and All Necessary Hardware Integrated Pump Station with Easy-to-Operate Electronic Control Proudly partnered with Chromagen to provide high quality thermal collectors
I I
HEAT EXCHANGER
SACI 80-2 SACI 80-3 SACI 120-2 SACI 120-3 SACE 80-2 SACE 80-3 SACE 120-2 SACE 120-3
Internal, Single wall Internal, Single wall Internal, Single wall Internal, Single wall External Double Wall External Double Wall External Double Wall External Double Wall
2 3 2 3 2 3 2 3
*Projected value A Single 4500 watt / 240 volt backup element included with all models System SRCC OG100 Certified, OG300 certification pending Contact your local sales representative for Cirrex Solar System accessories.
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
23
Residential Solar
Side and Top Connections for Open Loop Systems or Closed Loop Systems Using an External Heat Exchanger Low-Watt Density 240 Volt 4500 Watt Heating Element Two Coregard Aluminum Anode Rods Dynaclean Diffuser Dip Tube Tamper Resistant Brass Drain Valve 2 Inch Environmentally-Friendly Non-CFC Foam Insulation Reduces Standby Heat Loss CSA Certified and ASME Rated T&P Relief Valve
I I I I I
MODEL NUMBER
GALLON CAPACITY
STANDARD VOLTAGE
NO. OF ELEMENTS
HEIGHT (INCHES)
DIAMETER (INCHES)
R VALUE
SUN-80 SUN-120
80 119
21 21
240 240
1 1
4.5 4.5
63 1/4 63 1/4
24 28
16 16
24
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
I I I I I
Single Wall Internal Heat Exchanger Coil For Closed Loop Systems Side Connections for Heat Exchanger (Solar Loop) Heat Exchanger Suitable for Use with Propylene Glycol Ultra Coat Commercial Grade Glass Lined Tank (slush coating) Prewired for Temperature Sensor (Sensor Sold Separately) Low-Watt Density 240 Volt 4500 Watt Heating Element Two Coregard Magnesium Anode Rods Dynaclean Diffuser Dip Tube Tamper Resistant Brass Drain Valve 2 Inch Environmentally-Friendly Non-CFC Foam Insulation Reduces Standby Heat Loss CSA Certified and ASME Rated T&P Relief Valve
I I I I I I
MODEL NUMBER
GALLON CAPACITY
STANDARD VOLTAGE
NO. OF ELEMENTS
HEIGHT (INCHES)
DIAMETER (INCHES)
R VALUE
SUNX-80 SUNX-120
76 108
21 21
240 240
1 1
4500 4500
63 1/4 63 1/4
24 28
16 16
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
25
Pump Tanks
I
Multiple head construction adds structural strength and more capacity within the same diameters Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank Durable butyl diaphragm ensures long life Positive lock retention system controls compression in the diaphragm connection, eliminating air loss or water leaks in tank Electrostatically applied powder-coated exterior for maximum sunlight (UV) resistance with zinc phosphate undercoat for highest corrosion resistance Corrosion-resistant metal air valve Welded steel base 5-year limited warranty
I I
I I I
MODEL NUMBER
VOL. (GALL.)
PMI AND PM SERIES (FREE-STANDING) PMI-2 PMI-5 PMI-7 PMI-14 PM-14 PM-20 PM-26 PM-32 PM-45 PM-65 PM-85 PM-86 PM-119 SHORT MODELS PMH-7 PMH-14 PMH-20 7.3 13.9 19.9 2.0 4.6 7.3 13.9 13.9 19.9 26.9 31.8 45.2 65.1 84.9 83.5 115.9
DIAMETER (IN.)
WEIGHT (LBS.)
3/4 (M) 3/4 (M) 3/4 (M) 1 (M) 1 (F) 1 (F) 1 (F) 1 (F) 1-1/4 (F) 1-1/4 (F) 1-1/4 (F) 1-1/4 (F) 1-1/4 (F) 3/4 (M) 1 (M) 1 (M)
12-9/16 14-11/16 21-1/8 21-1/4 24-3/4 31-3/8 39-9/16 47-1/4 36-9/16 48-5/8 60-11/16 46 61-5/16 14 18-3/8 18-3/8
26
For propane gas inputs, further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
Expansion Tanks
I
Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank Durable butyl diaphragm ensures long life Positive lock retention system controls compression in the diaphragm connection, eliminating air loss or water leaks in tank Corrosion-resistant metal air valve 5-year limited warranty on potable expansion tanks 1-year limited warranty on hydronic expansion tanks
I I
I I I
MODEL NUMBER
DIA. (IN.)
WEIGHT (LBS.)
PMECT-SERIES (POTABLE EXPANSION TANKS - 5-YEAR LIMITED WARRANTY) PMC-2 PMC-5 PMC-10 TW-5 TW-12 PMET-2 PMET-5 PMET-7 PMET-14 150 150 150 150 150 100 100 100 100 1.96 4.55 9.25 2.10 4.40 1.96 4.55 7.3 14.6 1.53 3.75 7.8 1.53 3.75 1.53 3.75 4.6 10.5 1.27 3.05 6.55 1.27 3.05 N/A N/A N/A N/A 1.03 2.19 5.25 1.03 2.19 N/A N/A N/A N/A 3/4 3/4 3/4 3/4 3/4 1/2 1/2 1/2 1/2 12-1/2 14-3/4 15-3/4 12-1/2 14-3/4 12-1/2 14-3/4 21-1/8 21-5/8 8-3/8 11-3/8 15-3/8 8-3/8 11-3/8 8-3/8 11-3/8 11-3/8 15-3/8 5 8 20 5 8 5 8 11 22
All PMC models 40 PSI pre-charge All PMET models 12 PSI pre-charge
For further detailed information on warranties and technical specifications, visit www.hotwater.com to view and download specifications.
27
A. O. Smith Water Products Company 500 Tennessee Waltz Parkway Ashland City, TN 37015 PH 800. 527.1953 www.hotwater.com
A. O. Smith reserves the right to make product changes or improvements at any time without notice.
Printed in U.S.A.