Professional Documents
Culture Documents
Trimble Ranger Manual
Trimble Ranger Manual
Reference Materials
Ranger support (TDS): E-mail: [email protected] Web site: www.tdsway.com. Click on Support/Downloads and select Ranger. Product Accessibility Templates Visit the TDS accessibility web page at: www.tdsway.com/508 to download accessibility templates for our products. Accessible Formats To request materials in accessible formats for people with disabilities (large print, Braille, electronic les, audio format), send an e-mail to [email protected], call 541-7577254, fax 541-752-7133, or TTY 541-750-9292. Windows Mobile: www.microsoft.com/windowsmobile/default.mspx Accessories: You can expand the Ranger handheld computers capabilities by purchasing accessories. Go to www.tdsway.com/products/ranger/accessories
Contents
Welcome Device Hardware Unit Setup Working with the Unit and PowerBoot Module Settings on Your Unit Connecting to Your PC Communication Caring for the Unit and PowerBoot Module Environmental Considerations Hardware Specifications Environmental Specifications Safe Use of Your Unit Troubleshooting Regulatory Information Declaration of Conformity 1 2 3 6 13 15 16 25 27 28 29 30 32 35 36
Welcome
Congratulations on your purchase of one of the most advanced handheld computers available on the market today. The rugged design of your handheld allows you to work in harsh outdoor environments. You can operate your unit in blazing heat, subzero cold, driving rain or dusty job sites places you could not take a consumer-grade handheld computer. NOTE: Not all the features discussed in this manual will apply to every unit, as some of the features are offered as options. If the feature described does not apply to your unit, please disregard that section.
Device Hardware
Front Panel
Removable CF-Cap Stylus holder
Back Panel
CF-Cap
Notification LED
CF slot #1 Type I
SDIO slot
USB host
Serial port
NOTE: Be sure to read the warranty and safety information in this manual prior to using your unit.
Unit Setup
1. Charge your PowerBoot Module
The PowerBoot ModuleTM that contains the batteries is shipped detached from the unit. Before you insert the PowerBoot into the unit, you should charge it. The AC charger that ships with your unit has adapters to fit almost every electrical outlet. Connect the appropriate outlet adapter to the AC charger. Plug the charger into an electrical outlet and plug the barrel end of the charger into the PowerBoot. Charge the PowerBoot Module for approximately 4.5 hours. Warning! Be sure to always use the charger included with your unit. Use of other chargers will void warranty.
Power
The PowerBoot Module also has an LED that provides an indication of charging status. The LED states are shown in the following table. Normal usage: Off Fast blink Slow blink On Error conditions: 1 - 2 short flashes * 3 short flashes No charger present or it is unplugged Fast charge Topoff charge Charging complete Temperature out of range for charging Wrong charger
NOTE: If the fully-charged unit is still connected to the charger, the status found in Settings / System / Power will report the battery power remaining as if the unit were still on battery power. Swapping the PowerBoot Module: The PowerBoot is designed to be quickly swapped in the field (if you have purchased additional PowerBoot Modules). If the current PowerBoot Module runs low, replace it and continue with your work. The unit saves enough power that if you swap the PowerBoot within a couple of minutes, it will not trigger a reset. If the saved power runs out before the new PowerBoot is connected, the unit will reset. This will not impact saved data, programs or configuration, however unsaved data will be lost and the time will need to be reset. To change a PowerBoot Module, perform the following steps: 1. Remove the hand strap from the PowerBoot. 2. Ensure the unit is turned on. (The unit will automatically turn itself off when you loosen the screws in the next step.) 3. Use a screwdriver or a coin to unlock the two screws on the PowerBoot Module by turning them counter-clockwise until the PowerBoot can be removed. Unscrewing the screws turns the unit off and puts it in a special state that prevents it from turning on for alarms and notifications.
4. Remove the PowerBoot Module by taking it out of the unit. Be careful to not press the Power key while the PowerBoot is detached. 5. Quickly insert the new PowerBoot onto the unit. 6. Fasten the PowerBoot securely into place by turning the two screws clockwise. 7. Replace the hand strap. 8. Turn the unit ON to resume operation. NOTE: The screws MUST be tightened securely before turning the unit on or it will not turn on.
Storage Memory
Unlike many handheld computers which can lose data if they lose power, all your data is always stored in non-volatile persistent storage memory. Losing power will not impact saved data or configurations other than the real time clock. This means that you do not have to use a RAM backup utility to protect your data. However, you can lose data by accidentally deleting or overwriting it. As with any computer system, we recommend that you backup your data to removable media or to a desktop PC on a regular basis.
Tap to see more programs Tap to change device settings Tap to see a Help topic for the current screen
Pop-up menus
You can use pop-up menus to quickly select an action for an item. To access a pop-up menu, tap and hold the stylus on an item name.
Touch and hold to display the pop-up menu Lift the stylus and tap the action you want Tap outside the menu to close it without performing an action
The bottom of the screen shows the function of the two application softkeys in the top row of the keypad. Their function conforms to the needs of the program that is running.
10
11
+ + + +
12
Buttons
Tap Personal / Buttons. The Buttons (Keys) setting allows you to assign one keypad button to your favorite program. The assignable key is on the left hand side of the screen with the program that is assigned by default on the right. Choose the desired program or action from the pull-down list in section 2.
Input
Tap Personal / Input. You can change settings related to character input, word completion and capitalization.
Lock (password)
You do not have to provide a password unless you are concerned about unauthorized use. If you opt for password protection, tap Personal / Lock. The password must be entered every time you turn the unit on or use the Power key to resume operation. WARNING: BE CERTAIN TO REMEMBER THE PASSWORD. The only way to recover from a forgotten password is to return to a factory-default state and you will LOSE all application software, licenses, settings and data on your unit. See the section above on how to restore factory default state.
13
To change the volume, tap the speaker icon in the status bar of the Today screen. You can either change the volume or mute all sounds coming from the unit.
Screen
Tap System / Screen. The orientation can be changed to portrait for some programs that are not screen aware. To change the size of the text on the screen, tap Text Size to see more content or increase the readability in many programs.
Backlight
Tap System / Backlight. Choose the settings in the Battery Power, External Power and Brightness tabs as needed for your use of the unit. The display backlight has significant impact on battery life.
Memory
Tap System / Memory to see how much Storage memory (Flash) and Program memory (RAM) is available. Closing programs still leaves them resident in RAM. As more programs are started, available RAM decreases. If RAM resources become low, you can stop programs and remove them from RAM. First, ensure you have saved all your data. To stop a program, tap the tab Running Programs. You can stop individual programs or tap Stop All.
Power
Tap System / Power. This allows you to view the approximate battery power remaining. Note that both the Main battery and Backup battery levels are shown, but only the Main battery level is significant. Tap the Advanced tab and choose the settings for automatically putting the unit into suspend mode when not in use.
System Information
Tap System / System Information. Unit information can be found here including firmware version, serial number, processor speed, RAM and Flash size, as well as the wireless configurations.
14
Connecting to Your PC
I/O ports
USB host
Serial port
USB client
External power
The unit has a USB host port, a USB client port, and a 9-pin serial port. Connections via the USB Pin 1 Pin 5 client port to a PC require an A-B Pin 6 Pin 9 USB cable (included with the unit). Use the USB host port to connect to a USB client device. See note below. Serial connections require a 9-pin null-modem serial cable (not included with unit). You may also increase your connectivity options with CF and SDIO cards, if your unit has these slots. Note: Many USB peripheral devices that are supported on personal computers are not supported by this handheld computer. There are two classes of USB devices that have native support in the OS: USB Human Interface Devices (HID) and USB Mass-Storage devices. Examples of USB HID devices include keyboards, mice and some barcode scanners. Examples of USB mass-storage devices include memory-keys, hard disks, some digital cameras, and some memory card readers. Many USB devices fall into these classes and will work in your unit without additional software. Before purchasing a USB peripheral, check with the manufacturer to ensure that it will operate with one of these natively supported USB classes. Otherwise you must ensure that a device driver and/or application is supplied with a product that is compatible with Windows Mobile 5.0. Further, some devices have no applicability in Windows Mobile. For example, mice do not make sense to use with your unit because there is no cursor available in the Windows Mobile user interface since, unlike a PC, it is designed to be touchscreen operated.
15
Communication
The unit is equipped with multiple ways to communicate with other devices. Many of these are described in the following sections. Where noted, your unit may not have that particular feature.
Connecting to a Desktop
Connecting your unit to a PC is done using Microsoft ActiveSync 4.1 or higher. It allows you to synchronize information and copy files between your PC and your unit. ActiveSync is pre-installed on your handheld unit. Before connecting your unit to your PC, install ActiveSync on your PC from the Companion CD or as a free download from the web site: www.microsoft.com/windowsmobile/default.mspx. IMPORTANT: Do not connect the unit to the USB port on your PC until after you install ActiveSync. If you prematurely connect the unit to your PC, your PC USB drivers may get into a confused state and ActiveSync will not connect. If you suspect that something like this has happened, uninstall your PCs ActiveSync, reboot your PC, reinstall ActiveSync and reconnect the unit. Use the Setup Wizard on the Companion CD to install ActiveSync onto the PC.
The Get Connected dialog box will automatically appear on the PC. To connect your unit to the PC: 1) Connect the USB cable to the PC. 2) Turn on your unit. 3) Connect the USB to your unit. ActiveSync should automatically detect your unit. If not, click Next.
16
Once your unit connects with your PC, you will be presented with the Synchronization Setup Wizard window.
If you are simply interested in installing software on your unit, or in transferring files between your unit and your PC, click Cancel. If you want to synchronize the information in Microsoft Outlook (such as e-mail, contacts, calendar, and time) between your computer and your PC or/and Exchange server, click Next. You will be presented with the Select Synchronization Settings window. Select the types of information that you want to synchronize and click Next. Wait a few moments while ActiveSync synchronizes the selected information types with the unit. Once connected over ActiveSync, you will see this window on your PC. Click the Explore icon to view the file structure on the unit.
17
18
19
If you choose to create an Internet connection, open Internet Explorer Mobile on the unit (Start / Internet Explorer) to browse the Internet. Some features supported by desktop PC browsers are not supported by Internet Explorer Mobile. For instance, there are no pop-up windows, some sites may not be accessible and you may be unable to send e-mail with file attachments. If you choose to create a Work connection, open File Explorer on your unit. Tap Menu / Open Path / New Path to open a window, allowing you to enter the name of a computer on the network on which you want to view file shares. Tap OK. From here, you can browse the network file shares and copy and paste files between PCs on the network and the unit.
Exchange ActiveSync
Exchange ActiveSync, a component of Exchange Server 2003, facilitates data synchronization between your unit and an Exchange server. This synchronization can occur over 802.11, allowing you to update calendars, contacts, tasks and the Inbox on your unit without directly connecting it to a PC. The server must be running Exchange Server 2003 SP2 or later. To use Exchange ActiveSync, confirm with your system administrator that an Exchange Server 2003 server is available for synchronization. The administrator will also provide you with a login name, password, server name, and domain name. To configure Exchange ActiveSync on the device, tap Start / Programs / ActiveSync / Menu / Add Server Source. Enter the server address and confirm with your administrator whether the Exchange server requires an encrypted (SSL) connection. Tap Next. Enter the login name, password and domain in the next window. Tap Next Choose the data types you want to synchronize and tap Finish.
20
Troubleshooting 802.11 connection problems 1. Confirm that the unit has an appropriate IP address. To view the units IP address, tap Start / Settings / Connections / Network Cards / Network Adapters. For units equipped with Agere wireless modules, tap Wireless B Network Driver. For units equipped with Marvell wireless modules, tap Marvel CF8385N Wireless Card. (You can determine what kind of module you have by tapping Start / Settings / System / System Information / Wireless and look at WLAN. If it says Installed (Rev 1), you have an Agere wireless module. If it says Installed (Rev 2), you have a Marvel wireless module.) Confirm that the IP address is appropriate for the network to which you are trying to connect (for instance, 10.0.x.x or 192.168.x.x). Consult with your network administrator to confirm what appropriate IP addresses look like for your network. By default, the unit obtains an IP address from a DHCP server. If your network uses static IP addresses, enable the Use specific IP address and enter the appropriate IP address. 2. If the unit seems to be connected to the network, but you are having difficulty using the network connection, tap Start / Settings / Connections / Network Cards / Network Adapters, and confirm that the connection is appropriately configured as either a Work or Internet connection.
21
Bluetooth
If your unit comes with embedded Bluetooth capabilitya shortrange radio technologyyour unit can communicate with other Bluetooth-enabled devices without using cables. To find out if you have built-in Bluetooth available in your unit, tap Start / Settings / System / System Information / Wireless. Bluetooth on the unit is disabled by default and reverts to OFF after every reset. To enable Bluetooth on the unit, tap Start / Settings / Connections / Bluetooth. Check the box Turn on Bluetooth. If you want other Bluetooth devices to be able to find your unit, also check the box Make this device discoverable to other devices. The details of configuring Bluetooth connections vary depending upon how the other Bluetooth device works. Bluetooth file transfer between two units It is possible to transfer files from one unit to another over a Bluetooth connection. Tap Start / Settings / Connections / Bluetooth, and confirm that Bluetooth is enabled on both units. Confirm that the unit that will receive the file is set to Make this device discoverable to other devices. Tap Start / Programs / File Explorer on the unit that will send the file. Browse to the file to be sent, and touch and hold on it. Tap Beam File from the menu that appears. Wait for several moments while the sending unit searches for Bluetooth devices in the vicinity. Select the receiving unit from the list, and tap Tap to send. Wait for a few moments while the file is transferred. The receiving unit will open a window asking whether you want to accept the file. Tap Yes. The file will be saved in the My Documents folder on the unit.
22
ActiveSync over Bluetooth If your PC is Bluetooth-enabled, it is possible to establish a Bluetooth ActiveSync connection between your unit and the PC. Confirm that ActiveSync 4.1 or higher is installed on the PC, and that Bluetooth on the PC is enabled and configured to be discoverable. On your unit, confirm that Bluetooth is enabled, and tap Start / Programs / ActiveSync / Menu / Connect via Bluetooth. When the Bluetooth settings window opens, tap New Partnership. Wait a few moments while your unit searches for Bluetooth devices in the vicinity. Select the PC from the list and tap Next. Enter any passkey on the device and tap Next; enter the same passkey when prompted by the PC. On your unit, confirm that the ActiveSync service is available and selected, and tap Finish. Once the Bluetooth partnership has been created, you can establish a Bluetooth ActiveSync connection by tapping Start / Programs / ActiveSync / Menu / Connect via Bluetooth. If you have difficulty connecting over Bluetooth ActiveSync, open ActiveSync on the PC and confirm that serial connections are enabled (they are disabled by default in ActiveSync 4.1). Confirm that the serial port being used by ActiveSync is the serial port which corresponds to the Bluetooth serial port connection profile on the PC. Troubleshooting Bluetooth connection problems If your unit cannot find another Bluetooth device, confirm that the device is within range (less than 10 meters / 30 feet) of other Bluetooth-enabled devices. Also confirm that the device is turned on and has been configured to be discoverable. Bluetooth devices such as printers and cell phones are typically not discoverable by default.
23
Additional connectivity
If your unit has CF and SDIO slots, it can support several additional kinds of connections. If your unit does not have embedded Bluetooth or 802.11, CF or SDIO cards can be purchased to add the functionality. The following connectivity options are also possible: Modem: The unit supports dial-up connections to an Internet Service Provider and sending and receiving e-mail with file attachments. You will need to purchase an external modem, CF modem, or SDIO modem. Web-enabled cell phones: The unit can connect to the Internet via Bluetooth and Web-enabled cell phones that are compatible with Windows Mobile 5.0 devices. USB phone connections are not supported. Refer to your phone service provider for more information on establishing Internet connections via your cell phone. VPN: The unit includes support for Virtual Private Network (VPN) connections. Used together with a connection to the Internet, a VPN connection allows you to browse network files from a remote site and also supports remote synchronization with your PC via ActiveSync. Note that the network you access must be configured to allow VPN connections. For more information on creating these connections, see the web site listed under reference materials on the cover of this manual.
24
Mechanical shock
The unit is designed to resist damage for drops up to 1.22 meters (4.0 ft). However, you should protect the display from impact, pressure, or abrasive substances that can scratch it or crack it. The unit should not be dropped unnecessarily.
25
Charging guidelines:
It is not possible to overcharge the batteries. They are selfregulated. You may leave them on charge indefinitely with no adverse consequences to their service life. Use only the charger supplied with your unit. Use of other chargers may void your warranty. The acceptable temperature range for charging the battery is between +5C and +35C (+41F and +95F). This is based on the internal battery temperature that may be different than the ambient temperature. If the battery detects a temperature too high or too low for charging, the LED will flash a warning sequence. The PowerBoot Module will defer charging until it detects appropriate temperatures.
Storage guidelines:
If you have a spare PowerBoot Module that is not in use, do not store it in a place where temperatures exceed room temperature for long periods (like the glove box of a vehicle in warm climates). Long-term storage at very warm temperatures (over +35C / +95F) will reduce service life and will accelerate the normally very slow loss of charge capacity. For prolonged storage situations, store the PowerBoot Module at approximately 50% charge level. Do not store the PowerBoot Module with loose metal parts (like keys in your pocket) that might short the terminals. This could result in high currents and dangerously high temperatures.
26
Environmental Considerations
The units rugged design allows you to run your applications in harsh outdoor environments. Here are some considerations that will help you get the most out of your unit when working in very wet, hot or cold conditions.
Water
This unit is designed to withstand accidental immersion. To maintain the units water resistant seal, it is important to ensure that the CF-Cap is correctly oriented with the stylus holder facing the front of the unit, and that the screw on the CF-Cap is tightened but not over-tightened. Failure to reattach the CF-Cap screw could cause leakage and will void your warranty. Because the PowerBoot is designed to easily disconnect from the unit, water can occasionally find its way onto the metal contacts between the battery and the unit. After working in very wet conditions remove the battery and check the contacts to see if they are wet. If so, dry the contacts on both the unit and the battery with a paper towel or clean cloth before storing for overnight or longer.
Temperature range
The operational temperature range is from -30C to +60C (-22F to +140 F). In addition, the unit can be stored at temperatures from -40C to +70C (-40F to +158F). Although the unit is designed to be rugged, do not leave it in direct sunlight or in a parked vehicle in the sunlight for extended periods. Batteries perform best at room temperatures. The battery also has a very stable capacity as temperatures rise above the human comfort level. However, cold temperatures cause battery life to drop, and the colder the temperature the greater the reduction in available battery life. Under very cold conditions (-20C / -4F and below), you can expect your battery life to be shortened between 30 to 70 percent. When working in very cold conditions, consider carrying a fully charged, spare battery in a warm place. The unit is designed so that battery replacement can be easily done. The battery performance
27
will improve by keeping the unit and the spare battery warm (for instance, keeping them inside your coat). At moderate temperatures, you can expect your battery to last about 300 full charge/discharge cycles before its performance begins to noticeably but gradually decline.
Hardware Specifications
OS CPU RAM (VOLATILE) FLASH STORAGE MEMORY (NONVOLATILE) DISPLAY BATTERY LIFE Windows Mobile 5.0 Intel PXA 270 XScale CPU 64 or 128 MB SDRAM 256 or 512 MB of NAND Flash Landscape 3.8 Color VGA display, sunlight readable, backlit 30 hours continuous room temperature operation with default settings and no backlight ~4.5 hours to full charge; 80% charge in 2 hours 6600 mAh Lithium-Ion Power, RS-232 serial (9-pin), USB client, and USB host Integrated sealed speaker and microphone Optional 2 CF slots 1xType I and 1xType II, 1 SDIO slot Submersible, drop-resistant, dust-proof (see Environmental section) Optional Integrated Bluetooth and 802.11g (Wireless LAN) capability
BATTERY CHARGING BATTERY CAPACITY I/O PORTS SOUND EXPANSION PORTS ENVIRONMENTAL INTEGRATED CAPABILITIES
28
Environmental Specifications
TEMPERATURE WATER DROP SAND AND DUST VIBRATION ALTITUDE Operation: -30C to +60C (-22F to +140F) Storage: -40C to +70C (-40F to +158F) Submersible to 1 meter for 30 minutes, IP67, MIL-STD 810F, Method 512.4, Procedure 1 1.22 m (4.0 ft.) onto concrete Sealed against dust, IP67, MIL-STD 810F, Method 510.4, Procedures I and II Mil-STD 810F Method 514.5 To 4572 m (15,000 ft) at a nominal temperature of +23C (+73F) Mil-STD 810F Method 500.4, Procedures I, II, & III Meets FCC class B requirements
EMI
29
Correct
Incorrect
Repair
Do not attempt to dismantle the unit for repair. There are no userserviceable parts inside. For service, use the contact details listed on the cover of this manual or your local dealer.
Battery safety
Use only the battery supplied with your unit to power the unit. Use of other power sources could damage the unit, void your warranty and pose safety hazards. Caution: Do not expose to temperatures above 70 C (158 F) Do not short external contacts. Do not disassemble or mistreat the battery. Failure to follow those instructions may present risk of explosion, fire or high temperatures. There are no userserviceable parts in the battery pack. If it is defective, return it to the manufacturer for service.
30
Handle a damaged or leaking battery with extreme care. If the electrolyte comes in contact with your skin, wash the exposed area with soap and water. If it comes in contact with the eye, flush the eye with water for 15 minutes and seek medical attention. Lithium-Ion batteries are classified by the U. S. Federal Government as non-hazardous waste and are safe for disposal in the normal municipal waste stream. These batteries, however, do contain recyclable materials and are accepted for recycling.
Environmental hazards
The unit contains no mercury or cadmium. This product is RoHS compliant.
AC charger safety
Use only AC and vehicle chargers intended for the unit. Other external power sources may damage your product and may void the warranty. Make certain the input voltage on the charger matches the voltage in your location. Make certain the charger has prongs compatible with your outlets. AC chargers are designed for indoor use only. Avoid using the AC charger in wet areas. Unplug the AC charger from power when not in use. Do not short the output connector.
31
Troubleshooting
I am worried that my battery isnt performing as well as it should. Is there any way that I can test it to see whether its ok? First ensure the two battery screws are tightened securely. Intermittent problems can occur if the screws are loose. The operating system includes a Battery Logger utility to help evaluate battery performance. 1. Connect the AC charger to the unit and charge the unit fully. 2. Configure the unit to never go to sleep. Tap Start / Settings / System / Power / Advanced and uncheck the box under On battery power. Tap OK. 3. Run the Battery Logger utility by tapping Start / Programs / Battery Logger. Enter a file name and file location (or use the default) and tap Save. 4. Tap Tools / Start Battery Logging. This utility creates a file that records the battery voltage at intervals. 5. Disconnect external power and allow the program to run until the battery is exhausted and the unit shuts down. 6. Reapply AC power and reset the unit to close the power logging utility. 7. Open the battery logger file and check the time of the first and last entry to determine how many hours elapsed before the unit turned off. A healthy battery should run about 30 hours if the 802.11 and backlight are off. It is critically important that my battery doesnt fail during a job. Do you have any suggestions? Consider carrying a fully charged spare battery in the field. The unit is designed so that battery replacement can be easily done. How do I delete files? Open File Explorer and browse to the file to be deleted. Touch and hold on the file, and tap Delete from the menu that appears. Unlike desktop PCs, Windows Mobile does not support a Recycle Bin. Once you delete a file, it cannot be recovered.
32
How can I make the display more viewable? The default backlight brightness is set to about 65 percent of the maximum brightness. Tap Start / Settings / System / Backlight / Brightness, and adjust the slider to increase display brightness; however, doing this will reduce battery life. You can also change to the High-Contrast theme found under Start / Settings / Personal / Today. Also, confirm that you have one and only one! screen protector in place. How can I tell how much memory is available? Tap Start / Settings / System / Memory to view available free storage and program memory. The screen shot shows 93 MB of program memory is available for applications and 466 MB of storage is available for files. If a CF or SD memory card is installed, tap Storage Card to view available memory. If there is more than one card installed, tap on the dropdown arrow to select the different cards. When I work outside in the sunshine with sunglasses, the screen is very dark and hard to see. What can I do? If your sunglasses are polarized, they may be polarized at an angle incompatible with the display. Try using non-polarized sunglasses or sunglasses that have a different polarization orientation. Can I use my SDIO device with my unit? If your unit has a SDIO slot, SDIO devices will work as long as they are supported with the proper drivers. Check with the device manufacturer to see if the device is supported under Microsoft Windows Mobile Version 5.0 software for Pocket PCs.
33
How can I enable caps lock? Press Fn key (to the left of the A button), and then the up arrow key (to the right of the D button) to toggle caps lock. How can I see file extensions or file attributes? The File Explorer included in Windows Mobile does not have any support for viewing file extensions or attributes like the Windows Explorer program on a desktop PC. There are two ways to get around this limitation. You can connect the unit over ActiveSync and browse from the PC to view file extensions and attributes. (Refer to the Communication section for ActiveSync details.) Alternatively, third-party file management programs are available for Windows Mobile devices that may support a Recycle Bin as well as viewing file extensions, file attributes, zip archives and more. Can I work with Microsoft Office files in Word Mobile and Excel Mobile? Office Mobile applications are trimmed down versions of the PC Microsoft Office applications. Office Mobile applications allow you to view simple documents and to make simple changes on your unit. However, they do not support all of the formatting and other features (such as macros) that are supported by the PC applications. Can I use my USB memory stick (or mouse, keyboard, cell phone or other USB device) with my unit? Memory sticks and many other USB devices will work. Other USB devices may require special drivers that must come from the device manufacturer. Check with the device manufacturer to see if the device is supported under Microsoft Windows Mobile Version 5.0 software for Pocket PCs.
34
Regulatory Information
U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Canada
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de Classe B prescrites dans le rglement sur le brouillage radiolectrique dict par le Ministre des Communications du Canada.
35
Declaration of Conformity
Europe
According to ISO / IEC Guide 22 and EN 450 14
Tripod Data Systems, Inc. 345 SW Avery Ave. Corvallis, OR 97333 USA
Declares, under our sole responsibility, that the product: Product Name: Field Data Collector Model Number: Ranger X Product Options: ALL conforms to the following Product Specifications: Safety: EN60950-1:2001 EMC: EN 55022: 1994 +A1, A2: 1997 EN 55022: 1998 +A1:2000 EN 61000-3-2, 1995+A1+A2: 1998 EN 61000-3-2:2000 EN 61000-3-3:1995 EN 61000-3-3:1995+A1:2001 CFR 47, Part 15, Subpart B EN 55024:1998* EN 55024:1998+A1:2001* R&TTE Directive 1999/5/EC: EN 300 328 V1.6.1 EN 301 489-1 V1.4.1 EN 301 489-17 V1.2.1 Supplementary Information: In addition to meeting the above EMC requirements during system test, the AC Charger provided with this product has been certified to IEC 60950 +A1, A2, A3, A4, A11. * Product is battery powered. Corvallis, OR USA CAUTION: Only approved accessories may be used with this equipment. In general, all cables must be high quality, shielded, correctly terminated, and normally restricted to two meters in length. AC chargers approved for this product employ special provisions to avoid radio interference and should not be altered or substituted. Unapproved modifications or operations beyond or in conflict with these instructions for use may void authorization by the authorities to operate the equipment. 110606
36
RoHS
COMPLIANT
2002 / 95 / EC
2006 Tripod Data Systems, Inc. Tripod Data Systems, the TDS triangle logo, Ranger, CF-Cap, PowerBoot Module are trademarks of Tripod Data Systems. ActiveSync, Microsoft, Outlook, Windows and the Windows logo are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation. Other brand names and trademarks are property of their respective owners. Display images shown may vary slightly from actual display. Specications and data subject to change. Edition 10/19/06 Rev. B Printed in the USA