Professional Documents
Culture Documents
Company Valuation: Key Points To Remember
Company Valuation: Key Points To Remember
Company Valuation
A recent survey of managing partners of venture capital firms asked, What is the most common mistake entrepreneurs make as they try to raise money? Part of the most common response was, Not understanding how to properly determine the value of their company. Determining the value of a start up company is extremely difficult, but there are some basic principles all fund-raising entrepreneurs should understand and some tools they should know how to use. Why is this important? If you were to survey professional investors, whether in the stock market, real estate, precious metals, or private companies, the secret to success, you might find the most common answer is Buy low; sell high. As the CEO of your company, it is your responsibility to make your company more valuable, to allow your investors (including yourself) to profit from selling shares in the company. If you do not intend to raise money from investors, then you may not need to be concerned. Key points to remember: Value is subjective and differs by perspective. Even seemingly objective numbers are subject to interpretation or negotiation. If youve had to deal with an insurance company after an auto accident or other loss of property, you probably learned the difference between replacement value, book value, fair market value, depreciated value, assessed value, etc. The check you received may not be what you expected. The value of your company may depend on the value it represents to a potential investor or buyer. Ten percent of $50 million is worth more than 100 percent of nothing, or even $4 million. Bill Gates owns less than 10% of Microsoft and is one of few inventors who succeeded as entrepreneur who also succeeded as CEO of a large company. The goal of every company is to increase shareholder value. Every company starts off with the same valuation: $0. The most valuable company, according to Fortune magazine in 2007, was Exxon Mobil at $425B. Your company will fall some place in between. Every percent of ownership given to new investors comes from existing shareholders.
Pre-Money Valuation Defined Like insurance companies, entrepreneurs and investors have different definitions of value. For private companies seeking investment from outsiders, two of the most commonly used, and commonly misunderstood, terms are pre-money value and post-money value. While they are definitely related, they are not the same. In fact pre-money value PLUS investment EQUALS post-money value.
If you own a piece of land worth $100,000 then spend $200,000 building a house on that land, in a simple world, the entire property is worth $300,000. What you started with, the land, is now one-third the value of the whole asset. The new investment, the house, is worth two-thirds. This is similar to how a private equity investment may work. If your company is worth $100,000 then you raise $200,000 from investors, the company would be worth $300,000 after the investment is made. You would own one-third of the company after the investors buy the other two-thirds with their $200,000. This $200,000 is the money in the terms pre-money value and post-money value. Pre-money value: $100,000 + Investment (i.e. money in): $200,000 = Post-money value: $300,000 Many home owners want to argue that, sure the tax assessor may appraise the total property at $300,000, but I could sell it for more than that! Given the real estate market in recent years, thats probably true. But heres the question what if someone else spent the money to build the house on your land and you sold the property together; how would you split the proceeds? The simplest answer is to look at the value each contributed, assume the entire property appreciated or depreciated together, and share accordingly. Likewise, many entrepreneurs want to argue that their company is worth more than the $300,000 in this example. Assuming they spend the $200,000 from the investors wisely, the company should be worth more than $300,000 in due time. But, the point is to look at the company at the time of the investment, which makes the math very simple: $100,000 + $200,000 = $300,000. Another mistake entrepreneurs often make is to use the pre-money valuation to determine the ownership percentages. Allow me to use different hypothetical numbers than above for this explanation. With these new numbers, the entrepreneur retains majority ownership. If a companys pre-money valuation is $1,000,000 and an investor puts in $500,000 cash, then how much does the investor own? Many people would say half because $500,000 is one-half of $1,000,000. The investor put in half as much value as the entrepreneur. This is wrong. The investor will only own one-third of the company because the formula is Pre-money + Investment = Post-money. The post-money (i.e. the value after the money comes in) is $1,500,000 and $500,000 is only one-third of that. The investor would own 33%, not 50%. Another way to look at it is Yours + Mine = Ours. We need to know much you and I own of our collective company. Negotiations with investors There are dozens of terms you could haggle over when dealing with investors. Liquidation preference, conversion rights, anti-dilution protections, etc. In many cases, no single item is
more important or more hotly contested than the value of the company. It is akin to salary negotiations the investor wants the CEO to have enough incentive to work hard, but does not want to overpay. For investors, companies valuations also are like prices of goods. When you buy fruit at the store, you need to know how much you get for your money. Assuming you know you want to buy fruit and are hungry, price per pound is perhaps the only way you can literally compare apples to oranges. The value of the company determines how much of the company the investor buys with their investment. Prove this for yourself by changing the pre-money valuation in the formula listed above, while keeping the investment amount constant. The irony about a start up companys valuation is that it really matters most when a company turns out to perform only modestly. Of course, no one at the negotiation table expects that to be the outcome. Instead, they likely expect the company to be either a huge success, or go down in a blaze of glory. If the company does hit it big, then everyone should get very rich (or richer) in most cases. While the difference between 55% and 65% of $100M may have a large real value, the effect on ones pocketbook or portfolio probably wont be felt in the wake of getting a windfall of $50M-plus. If the company is a failure, then you end up dividing a near-worthless asset. But, if the company does ok, a few percentage points can mean the difference between a net profit or loss on an investment, or between getting a decent payback on years of working without a salary or having to explain to your family what you were doing all that time. In the end, the other issues in term sheets glossed over above are designed to protect an investors downside. Investors want to minimize their loss if things go wrong (which they usually do in this sort of high-risk investment) almost as much as they want to maximize their gain on their few winners. The division of a company (which is directly related to the valuation prior to investment) is what determines how much of an upside the investor can realize when things go well, or very well. The survey of venture capitalist mentioned earlier found that there remains a major divide between entrepreneurs valuation of their companies and outside investors valuation. What does this disagreement mean? Should entrepreneurs value their companies lower? Should they stick to their guns until investors agree with them? Risks of Overvaluation First, you may not receive any investments if you ask for too high of a price. If you hold steady with your price for too long, you may run out of operating cash and become so desperate for investment that you have to eventually accept a valuation lower than you could have received at the start. Second, an unrealistic valuation is a sign of an inexperienced entrepreneur. Most investors put more weight in the management team than any other aspect of a new business. If you start off showing immaturity, then you stand a good chance of turning off potential investors, no matter how exciting your company itself is. Third, even if you do succeed in securing investment dollars (i.e. convincing someone to invest in your company) you run a greater risk of dilution in later rounds. Subsequent
investors dont have to accept what previous investors agreed to. You may have to face a down round, which is similar to when a public stock price goes down. People can buy more shares for less money, but people who already have shares lose value or lose money if they try to sell. You will have to decide between accepting these unfavorable terms or closing down the business (after even more money and time has been invested than has been up to this point). At best, negotiations with new investors can become contentious and may upset your relationship with previous investors as well. Fourth, you may get away with inflated valuations if you can continue to find investors who accept your numbers. This is easiest to do when you have either competition for your company (i.e. multiple offers from investors) or can find less sophisticated investors. The downside is that you may not receive valuable non-monetary assistance from your investors. Oftentimes, the advice, contacts, mentoring, etc. investors provide is as important as the money they bring in. Experienced investors can add tremendous value, and therefore may charge a little more (i.e. demand a higher percent of the company).
Risks of Undervaluation If you under price your company, you may give up too much of your company too soon. But, it is important to differentiate between giving up ownership and giving up control. Usually, entrepreneurs are more fearful of losing control of their company than letting someone else make more money than they will (although that can be painful to see happen too). You can negotiate terms to separate control and ownership if needed. You also should keep in mind that a small piece of a big pie can be worth more than a big piece of a small pie. Investors are aware of the entrepreneurs financial interests too. They should want the entrepreneur to have enough incentive to keep working, struggling, and advancing the company. (Of course, this may not be the case if the entrepreneur wont add value in the future; if may be best for the company to replace the CEO but thats another discussion.) If the founder/entrepreneur feels they gave away too much and stands little chance of receiving financial satisfaction from all their hard work, they may simply walk away and let everyone, including themselves, lose the whole investment. If you resign yourself to a low valuation because you are desperate for cash, you could try to protect yourself by raising less money. Raising less money at low prices could avoid giving up too much too soon. However, you run the risk of running out of cash too soon. It usually takes longer and more money to build a company than entrepreneurs expect, so starting off with less money than you know you need cant be good. Commonly Used Valuation Tools and Methods The big question is how do you determine the value of your company? There are a number of commonly used methods: Comparables (aka Market Value) Look at other private investments or ratios such as priceto-equity or price-to-revenues and apply to your company. This information is readily available
for public companies, but more difficult to find for private companies. While other companies values may be useful for comparison, you need to adjust for various factors, or differences to your company. For example, public companies have much higher liquidity. That means that a stockholder (investor) can likely sell their stock at any time, even within a few seconds, if they want to cash out for whatever reason. Investors in start up companies may have to wait for many years to sell off their shares. Also, the risk that a large public company may go out of business within a few months is much, much lower than the risk of a start up failing. You may also use specific industry benchmarks that make sense, such as price per member or subscriber. Various resources publish lists of comparables by industry. Discounted Cash Flow (DCF) One of the most common methods to value an established company is to calculate its net cash flow over time, then determine the current value. For a company that year in, year out, generates a million dollars in cash profit, it is relatively easy to value this annuity. But, for start up companies that dont have any revenues, this is much harder. Any measure of cash flow is usually entirely based on projections, which are laden with assumptions and seldom prove to be accurate. Even if your company has operated for a number of years, you cant assume steady numbers or even steady growth. You must be raising money to pay for something that will change (improve) your company drastically. Past performance really is not an indicator of future results because you are about to grow quicker than ever before. Another issue with DCF is that even if you and potential investors agree to the projections and terminal value, a key number to the formula is the discount rate (thats why its called discounted cash flow), which is the difference in value of $1 today compared to $1 next year, or in five years. Investors would prefer a high discount rate (i.e. a dollar in five years is not worth very much) and you would prefer a low discount rate (i.e. a dollar is a dollar regardless of when it comes in). Investors discount future dollars highly partly because future earnings are uncertain and very risky and partly because future cash inflows have to include expected returns on todays cash outflows. While many investors have a good idea about a discount rate they like to use, negotiations may involve a fluid mix of cash projects and discount rates in calculations that make sense to both sides. Low cash values calculated using low discount rates may provide similar results as high cash values and high discount rates. The result is that the negotiation over these numbers is really a proxy for negotiation over valuation how do we divide this pie? So this method doesnt really solve the question of valuation by itself. However, it does provide a possible guideline using quasi-industry norms and a possible range for the valuation. Here are common discount rates at various stages:
What this method provides, more than anything else, is a bit of a reality check for the entrepreneur. If the DCF model results in a pre-money valuation in the range of $2M to $3M, then you should not expect to be successful pitching a $5M company value. VC Method Venture capital firms have specific return expectations and goals. They also have specific timelines within which they need to exit an investment. The VC method starts with these two factors and calculates a value accordingly, based on a companys projections (or the VCs own projections for the company) and a relevant multiple. Heres how it works: Start with the projected revenues or net profit in the exit year, often year 5. Lets say revenues will be $100M and profit is projected to be 10% of that, or $10M. Multiply one of these numbers by an appropriate comparable to determine price, or value, in the exit year. If using revenue, then youd use a P/R comparable; use P/E if using earnings, or profit. Well assume the P/E is determined to be a fairer comparable and use a P/E of 5 in this example. Earnings ($10M) x P/E (5) = Value ($50M). The VC would then apply its discount rate to this value, which is usually its required IRR (how much it needs to make each year, compounded, to generate its return goal) to determine the required multiple over five years. If the VC seeks an IRR of 60%, that translates into a 10x return over those five years. So, multiply the amount of money to be invested (how much youre raising) by this 10x to see how much the VC needs to receive in year 5. If the company is raising $1M dollars, then this would have to grow to $10M (10 times $1M). This $10M is the VCs share of the $50M the company will be worth in five years. Dividing $10M into $50M produces a 20% share for the VC. Thats how much theyll own in five years, and is the same they will own after they invest today (not including dilution from future rounds for this simple illustration, which will have a material effect in real life). If $1M now buys 20% of the company today, then the current post-money valuation is $5M ($1M / 20% = $5M). Remember, post money valuation = pre-money valuation + investment, so the current pre-money valuation is $4M ($5M - $1M). Net Asset Valuation What is the value of your tangible assets? This method does not consider the companys performance or potential performance. This may make sense with a real estate property, or a hotel chain that owns a lot of real estate, buildings, and other assets, but most start up companies have few assets of value. Thus, this method is not very helpful for startups.
Rules of Thumb You can see how potentially complicated and arduous it can be to develop full valuation models based on numerous assumptions, calculations, projections, and research. During initial discussions with investors, they dont have time to do all this work and often dont have computers with them to develop a complete spreadsheet. So, many have developed, or adopted quick calculations they can make in their head on the spot. For instance: Simple multiples: Value at exit = 1 x Projected Revenues in Year 5. The assumption is that the projections are probably inflated, so any potential multiple is canceled out. Regardless of what calculation investors use to determine the exit value, the next step is to determine the current value. Investors can do this by inserting their own return expectations and calculating a current valuation. For example, if an investor desires at least a 5X return over 5 years (a 38% IRR), then the value at exit needs to be at least 5 times the value now. In other words, your pre-money now should be 1/5 or less of your year 5 revenue projections. This is a simplified version of the VC Method described above. Value by stage: The average pre-money value of seed/startup companies is between $1M to $3M, or between $2M and $5M, depending on the source of the study. Simple enough to start negotiations, right? The upper end is reserved for experienced entrepreneurs with truly unique opportunities. If youve made some progress and reached early milestones, a valuation of about $2M should be received without much resistance from investors. You should run your calculations for exits and returns using $2M as the premoney valuation to see if you would be happy with the numbers, and if investors will too. If you are very early in your business, then dont expect much above $1M. Rule of Thirds: Based on a trend many early investors have noticed, this rule states one-third of a new companys equity should go to the founders, one-third to management, and one-third to the seed investors (angels). If the founders are the management team, then they can keep more (but allow for an option pool for future executives hired). So, whatever amount youre seeking from investors would then represent one-third of the post-money valuation. Mathematically, this is the same as saying your pre-money valuation should be twice the amount youre seeking. How much do you want?: Working backwards from the answer, if you are dealing with an investor that targets a specific ownership percentage, and you know how much you need to reach the next significant milestone (i.e. a step up in company valuation), you can focus on a valuation that makes sense. In the simple example of an investor who targets a 50% ownership stake, then your companys valuation should equal the amount of money you are raising. This is similar to the Rule of Thirds, but allows for a broader range of circumstances.
Million Dollar Idea: Sometimes called the Berkus Method, after investor Dave Berkus, investors start with a base valuation, and assign up to a million dollars in value for strong performance or evaluation along specific attributes. For example, if the company has (1) a very strong idea, (2) an existing prototype, (3) a quality management team, (4) an established value-adding board, and (5) existing sales/revenue, then the investor would add $5 million to their baseline. Any attribute that is less than stellar, or lacking, would result in a lower valuation. This seems simple, but requires judgment along each attribute (and different investors may have different requirements or weights/values) and is thus very subjective. Scoresheet: Investors may look at numerous specific aspects of your company to accept or discount your proposed valuation. This can be similar to, but more detailed than, the Berkus Method. Investors may assign points to each category then have a calculation to determine a pre-money valuation. Or, it may be a tool to simply place your company appropriately on a range of realistic values, such as the low or high end of the $2M to $5M range of average seed stage valuations. Negotiated Value In the end, the only value that really matters. You may develop the most robust model and perform intricate calculations to determine the precise value of your company without a doubt, but it may all be for naught if you cant close the deal. What can you successfully negotiate? What is the investment market willing to pay for your company? The market in the late 1990s was drastically different from the market in the early part of this decade. Over the course of three years, similar companies would have had dramatically different valuations. The only real answer to the question how much is your company worth is what other people agree its worth. By performing some of the calculations described above, you can enter negotiations with a solid starting point and know how high or low you can go. The key is to be realistic and flexible. Failure to Agree After all this, what if you and your potential investors cant agree on a value? One solution is to discuss convertible bridge notes instead of equity. This is similar to checking instead of placing a bet in poker because you wait to see what everyone else does before committing to the round. Its often called a bridge note because it helps your company across a gap to a specific point, usually another, larger round of financing. The investors (lets say their angels) loan you the money, but have the option to convert their loan to equity at some time in the future. This could be a set period of x months or x years, or as another event occurs, often when you close the next round (from VCs, perhaps). Instead of declaring a value now, you agree to give these angels some favorable value over the VCs. That could be a discount of, say, 10-20 percent. This means that if the VCs invest at $1 a share, the angels can convert their investment/loan at $.80 to $.90 a share. Or, instead of a discount, you can give warrants at a specified price; they can buy up to a predetermined amount of stock at that price, which should be lower than the current
price ($1/share in this example). You get the cash now from the angels and they get a lower price than subsequent investors. The biggest downside for the company is that it is debt, so you may be required to actually pay it back, with interest. The biggest downside for the investor is it limits their upside to some extent. With traditional seed round investments, they can see a jump in valuation much higher than 10 to 20 percent to the next round. They may be able to invest at $.10 a share, not the $.90 they get upon conversion.
A note about dilution: Dilution means a decrease in ownership percentage. A founder starts off with 100% ownership of the company, but that gets decreased each time others receive equity in the company. Investors also get diluted at each subsequent round. This is a normal part of the fundraising process. Investors suffer abnormal dilution whenever a subsequent round is raised at a lower valuation, called a down round. It is important to both differentiate between the normal process and dilution caused by down rounds, but most people refer only to the latter when talking about dilution. According to PricewaterhouseCoopers/National Venture Capital Association MoneyTree Report Average Valuation Data by Stage of Development Rolling 12 Months Q1 1997 - Q4 2006, the average pre-money valuation for early stage companies over the four years from 2003 through 2006 was $8.74 M. (Note this is based on VC financings, so early stage does not mean seed stage, or angel round.) On average, investors in those rounds received 40% of the company, leaving 60% for founders and seed investors. Expansion round investors averaged a 23% stake, and later stage investors averaged a 20% stake. After these rounds, founders and seed investors retained an average of 37%. If we assume that seed stage investors (not included in PWC/NVCA survey) take a one-third stake, founders would be left with two-thirds of the company after seed stage. Over time, that would decrease to 40% after early stage, then 31% after expansion stage, resulting in 25% after late stage. However, the dollar value of founders stake would have increase from about $2M to about $20M, on average. It is probably safe to assume the founders likely would not have made $20M on average had they not raised the additional money from investors.
Conclusion Start up companies are full of promise for what could be. Start up companies are also full of risk. After all, most companies fail while only a tiny percentage ever goes public. If you were to perform an expected value calculation, multiplying the potential value of the company by the probably of actually reaching that potential, you would find the value is not that high. The key to determining the value of a company is look at what has actually been done, not what may be done in the future. Thus, the key to negotiating a high valuation, and thus maintaining a large percentage of your company, is to achieve as many key milestones as you can before approaching investors.