Professional Documents
Culture Documents
Fuzzytech Crane Simulation
Fuzzytech Crane Simulation
Objectives of Ports
For delivery of goods through containers transported by cargo ships. Example is PTP in Johore, Wesport in Klang and of course Singapore.
Crane Productivity
Crane productivity is measured by how fast the Port Authority can move the cranes. Singapore = 25 moves/hour Jakarta = 17 moves/hour Malaysia Westport=22 moves/hour
For these reasons, most container cranes use continuous speed control of the crane motor- a human operator then control the speed of the motor.
The operator has to simultaneously compensate for the sway and make sure the target position is reached in time. This is not an easy and would need very skilled operators.<You can try to manually control the crane through simulation>
2. If you get started and still far away from the target, adjust the motor power so the container gets a little behind the crane head.
3. If you are closer to the target, reduce motor speed so the container gets a little ahead of the crane head. 4. When the container is very close to the target position, power up the motor. 5. When the container is over the target and sway is zero, stop the motor.
See if you can write the rules to control this container crane system
First identify the antecedent variables Next the consequent variable Then write the rules according to the analysis of the operators action in the previous page. 6 rules can be written- Try?
Consequent
Defuzzfication
Inference
Fuzzification
Antecedents
Antecedents
Partition or break your antecedents into several fuzzy sets that can reflect the system
For each antecedent, identify the range for the universe of discourse. Distance Metres or Yards Angle From -90o to +90o Break up each antecedent 5 fuzzy sets each and provide the appropriate label that reflect the variables
Distance
Angle
too far
far
zero close medium
Next design appropriate membership functions for each fuzzy set and set them on the universe of each antecedent
Distance Angle
pos_
medium
Inference procedure?
Max-min or (min/max as described in FuzzyTech) Max-dot Etc.
Defuzzification
Centroid Mean of max