2G Traffic Statistics Analysis ISSUE1.0
2G Traffic Statistics Analysis ISSUE1.0
Analysis
www.huawei.com
Foreword
Page3
Objectives
Page4
Contents
1.
2.
3.
Page5
Measurement term
Counter WHAT
Customer counter
Object
WHO
Period
WHEN
5 15 30 60 1440 min
Page6
Hierarchical Structure of
Performance
P
E
R
F
O
R
M
A
N
C
E
Cluster 1
Unit 1
Item 1
Item j
Unit m
Item1
Cluster n
Item k
Page7
Hierarchical Structure of
Performance
Counter
Cluster
Unit
Page8
Contents
1.
2.
3.
Page9
Analysis Process
Systematical logic:
From whole system to specific cell
Integrality
Observe the change trend of the items for more than
one week and the changing trend of each day.
Relativity
Relationship between various kinds of traffic statistics
items
Page10
Analysis Process
Analysis process
First we shall analyze and compare the item of BSC measurement function to have a
rough idea for the whole network.
During analyzing, if any important items (such as call drop rate or handover success
rate) are abnormal, we shall do further detailed analysis for the corresponding items.
Page11
Analysis Process
BSC Measurement
MR Measurement
Call Measurement
Channel Measurement
Page12
Traffic Analysis
Page13
Traffic Analysis
Page14
Traffic Analysis
Page15
Traffic Analysis
Page16
Often-used Items
Page17
Often-used Items
Page18
Page19
Page20
KPI Measurement
Page21
Interference Band
Interference band 1
Interference band 2
98 dBm to 90 dBm
Interference band 3
90 dBm to 87 dBm
Interference band 4
87 dBm to 85 dBm
Interference band 5
85 dBm to 47 dBm
Page22
Page23
Page24
Receive Level(dBm)
<100
(-100,85]
(-85,-80]
(-80,-75]
(-75,-70]
(-70,-65]
(-65,-60]
>-60
Page25
Page26
Page27
Page28
Page29
Page30
Page31
Page32
This traffic unit also measure the reasons of intracell handover: interference intra-cell handover,
TCHF-TCHH in the AMR calling, intra-cell handover
during the channel conversion, overlaid/underlaid
handover.
Page33
Page34
Uplink-and-Downlink Balance
Measurement
Page35
Uplink-and-Downlink Balance
Measurement
Page36
Uplink-and-Downlink Balance
Measurement
15 dB
5 dB, 4 dB, 3 dB
2 dB, 1dB, 0 dB
0 dB
1 dB, 2 dB
3 dB, 4 dB, 5 dB
10
11
Page37
Page38
Page39
Page40
Page41
Page42
AMR Measurement
Page43
AMR Measurement
Page44
Contents
1.
2.
3.
Page45
alarm hardware
Rx-level
Interference band
quality
TA
Page46
Call drop in stable state: call drop during the calling, the major
reasons are error indication and connect failure.
Page47
Page48
Causes
MS is out of cells effective coverage area, Island phenomenon
caused by over shooting or missing neighbor, Isolated site.
Solutions
Adjust antenna height and antenna downtilt, use high gain antenna;
Page49
Causes
Solutions
Increase EIRP
Adjust antenna direction and downtilt, make the main lobe point to
high traffic area
Page50
Page51
Page52
Solutions
Page53
Disposing method
Page54
KPI measurement
Incoming H.O
Alarm hardware
External inter-cell
Handover
Outgoing H.O
Interference band
Internal inter-cell
Handover
Page55
Handover Analysis
Outgoing or incoming
Page56
Handover Analysis
Page57
Handover Analysis
Page58
Handover Parameters
Check whether the handover threshold such as TA, BQ and handover function switch are
suitable or not.
Check whether the successful TCH seizures for handover are much more than successful TCH
seizures for call. If handover times divided by call times is larger than 3, then it indicates that
there may be ping-pong handover. Check the parameter settings and adjust them (layer
setting, layer handover hysteresis, inter cell handover hysteresis, PBGT threshold, etc.).
Check whether the average signal strength is low when the handover happens. If so, it
indicates the edge handover threshold is too low.
Page59
Summary
Page60
Thank you
www.huawei.com